Wlan not working in win 10 in hyper v

hi ,
I have installed Windows 10 preview in my Hyper V using Windows 8.1.
i have followed this steps in these urls
http://blog.credera.com/technology-insights/microsoft-solutions/using-your-windows-8-wireless-connection-inside-hyper-v/
http://blogs.msdn.com/b/virtual_pc_guy/archive/2008/01/09/using-hyper-v-with-a-wireless-network-adapter.aspx
But the WiFI Isnt working in Windows 10 guest OS.
Im getting network as limited and its not working.
How i can set it up
Thanks
Thank You , Shan Ali Khan

Hi Shan,
For this blog:
http://blogs.msdn.com/b/virtual_pc_guy/archive/2008/01/09/using-hyper-v-with-a-wireless-network-adapter.aspx
You may need to another thing :
1. configure an IP for that "internal virtual switch"
2. configure an IP for VMs which connecting to that internal virtual switch
3. configure Internal virtual switch's IP as the gateway for virtual machines connecting to that internal Vswitch
(the Gateway and VM's IP should be in same subnet)
Please refer to following thread ：
https://social.technet.microsoft.com/Forums/en-US/d380e4c3-a9c0-483f-8fd9-11962b1f486c/enable-virtual-machine-to-access-internet-with-ics?forum=winserverhyperv
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .
Thanks it worked for some time. Actually My DNS Server IP Changes when my router restarts.
Any there any way to setup without DNS i tried but the internet on windows 8 host becomes poor. ?
Thank You , Shan Ali Khan

Similar Messages

I got adobe audition 1.5 it is not working in win 7, what i need to do

i got adobe audition 1.5 it is not working in win 7 what i need to do

Do you receive an error when opening the application? Any error messages while trying to install?

CC desktop app not working on Win 8.1

Creative cloud desktop app not working in win 8.1. The window is blank, only the header is visible. I've tried reinstall and shut down ESET firewall, but nothing is working. I use the same plan in work on win 7 and it's ok. Please help, maybe some Win 8.1 update? An by the way, when I update my CC app, everything on my desktop disappear and I must reboot system to fix it, this is not normal as well...
Thanks for answer
Radek

I've found the answer...sorry for questionig it again :-)

AVAppGetActiveDoc not work in win 7

It's a plug-in code use AVAppGetActiveDoc(under acrobat sdk 5),It work fine in win XP(acrobat 7,8,9), but is not work in win 7, acrobat 9,is any suggestion?

Maybe using the SDK 9.
Regards,
Joe

WLAN not working after v30 update on N95

I saw a previous thread about WLAN not working on the N96 after update.
I can now confirm that WLAN is also bugged for the N95-1 after firmware update to v30.
It tries connecting, then after a few seconds, I always get the message "WLAN: Unable to connect. WLAN network not found"
This did not happen a few minutes before the update. Last firmware version was the v22 (latest one before v30)
Has any fix been found? My main usage for my phone is for the wifi, and without it I can't do much

Nokia is the host of this forum, however the forum operates and functions with the participation of common folk, users from all over the world that either share passion for Nokia or are looking for support and answers from other community members...if you want to complain to Nokia there is a : Contact us - button on top right of this page...if you want to try to find answers patience sometimes is a virtue....now the issue of untrusted software, there are applications and sometimes themes that you have installed on your memory card/mass memory that will give that message when you go to application manager it will list the apps that are installed and that are not installed on your device, you can either install them manually or remove them from your phone, the next time you restart your phone you should have no problems with those messages. now the WLAN issue i am not sure about and I am almost certain it has nothing to do with your untrasted software messages.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Sopund Blaster 5.1 VX Not working with Win 7

I have a SB 5. VX not working with Windows 7 , Please reply any comlete solution.

Re: Sopund Blaster 5. VX Not working with Win 7Not sure if you are using the driver available from the support site for Win 7 but if not, you can get it here.

Preview/Publish Not Working in Win 7

I am creating simple non scoring quizzes in Captivate. When i go to publish or preview the screens never create. I am on a new computer with Win 7 64 bit OS. I still have my old computer and if i take the project file and publish there it does create. I am trying to finish setting up the new computer and this is a hurdle. any Ideas?

captivate 4. I am running it as an admin.
Leonard D'Arcy
Dean Foods
Business Analyst III
IT DMS Education Group
LMS Administrator
Lilybiri <[email protected]>
09/16/2010 02:38 PM
Please respond to
[email protected]
To
Marlon D'Arcy <[email protected]>
cc
Subject
Preview/Publish Not Working in Win 7
Hello and welcome to the forum,
About which version of Captivate you are talking? Did you run Captivate as
administrator? If you are still using Captivate 4 there are issues with
Win7 64-bit, and several threads in this forum. But first tell which
version you are using.
Lilybiri

TS1363 ipod classic not working with win xp not sure how to sync it?

ipod classic not working with win xp not sure how to sync it?

Have you read this?
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
Switch 101: Migrate your Windows files or system to your Mac
http://support.apple.com/kb/HT2518

Amd video drivers not working after win 10 upgrade

AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.

Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

WLAN not working under Windows XP on Satellite U400

After installing Windows XP Recovery on my U400 the WLAN is not found. Under Win Vista it was working properly.
There is no module listed under the device manager - searching after new hardware gave no results. It seems that the WLAN Interface is not recognized by Win XP.
The Communication switch at the front was "ON" - bluetooth is working correct.

Hello,
the problem with my notebook is the following:
I bought the notebook with 3 GB Ram. With Windows Vista everything worked fine.
With XP there is a problem with adress ressources. Everything above 2 GB Memory allocates new adress ressources. So in the device manager there is an device "PCI Express port 6" or something like that wich is shown with a warning. This device conflicts with the wireless adapter - so no adapter can be found. If i remove 1 GB (whatever combination) the adress conflict is resolved and the wireless adapter is working.
Thanks to my local notebook dealer (notebook shop in Darmstadt/Germany) for discovering the problem.
I now switched back to vista and everything works with 3 GB. (Memory was more important to me than having XPinstead of Vista).
I think the problem can be solved with a new bios update!
Regards - Felix

Tecra M10-10z - 3G does not work after Win 7 installation

Tecra M10-10z I have installed Windows 7 pro 64bit
Everything is configured correctly, but connection 3G does not work: the message is " no network"
with Windows XP is ok.
I did not find firmware updates or similar.
Is there someone who can help me?
tks

Hi
In order to use the 3G you should firstly check if the 3G ericsson module was properly installed.
In case there is an yellow exclamation mark visible in the device manager, the 3G driver should be reinstalled.
I found on the Toshiba EU driver page:
[Ericsson 3G Win 7 driver|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=813&selSho rtMod=null&language=13&selOS=30&selType=295&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=295&page=1&ID=71930&OSID =-1&driverLanguage=42]
Furthermore ensure that the 3G RF Power Control Utility has been installed properly.
The 3G RF Power Control Utility" activates your 3G on startup.
This tool can be found here:
[3G RF Power Control Utility for Win 7 64bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=813&selSho rtMod=null&language=13&selOS=30&selType=322&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=322&page=1&ID=73658&OSID =-1&driverLanguage=42]
Hope the 3G network would functions after the reinstallation of both tools.

Print Spooler does not work after Win 8.1 install

I upgraded several computers to Win 8.1. Most are operating normally and do not have this problem. This is relevant to show that it is not a printer hardware or compatibility problem. On one computer, the print function is not working.
I've tried reinstalling printers, getting new drivers, etc. It comes down to this. An active (connected) printer is selected and print test page is selected. The dialog box says that the print queue is full. I went to the queue subdirectory
and deleted all files, no change to the results. The Print spooler is active in task manager. Stopping and restarting the print spooler makes no difference. Any ideas?

I had similar problems with HP Printers on the LAN (after upgrade from Windows 8 tot 8.1
32bit)
HP Laserjet 4000 Laserjet 4050 and Laserjet 4250 - all with Network interface.
Erratic behaviour: inserting blank pages, no duplex printing, programs stalling when printing etc…
Printers and network are fully functional and work perfectly with W7 and XP. Not with Windows 8.1.
Strange thing: Epson Aculaser and Ricoh Aficio 3224 worked fine but those were installed after the Windows update.
So definitely something with the Microsoft drivers for the HP Laserjet printers.
After a few installs and uninstalls of the HP printer drivers the problems stayed.
Then I removed all HP related driver files (C:\\Windows\\system32\\spool\\PRINTERS")
and all references in the Register because the standard uninstall of the drivers did not remove all files.
-> First uninstall ALL HP printers (laserjet, deskjet, officejet etc ..)
-> Then look in
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers]
Make a backup of the registry keys and then remove all files starting with hp….
Remove the print processors starting with hp
(i.e. hpzpplhn.exe)
Then restart your system.
Reinstall the printers, they should be OK now.
If you still have duplex printing problems : replace the hpzpplhm print processor with the winprint processor. (may give other limitations, google for more info).
In my case this solved the erratic printing problems.

Speakers on monitor do not work with Win 8.1

Yesterday I upgraded from Win X - SP 3 (discontinued by Microsoft) to Win 8.1. I spent the entire day with a Microsoft technition on-line to figure out how all this works. One thing he could not get to work was the speakers on my monitor (HP vs 19c). He took over control of my computer to work out the various issues. I know he went to Realtec to try to find a driver for the speakers but without luck. The speakers worked before, why don't they work with Win 8.1. The monitor works fine. Unfortunately without sound I cannot go through the tutorials to learn more about how to use Win 8.1.
This question was solved.
View Solution.

Thank you so very much. I installed the driver for Win 8.1 but that apparently was not the problem. Please forgive me for being so dense. On control panel I kept seeing the problem as not having the speakers plugged in. The other day I unplugged to wire going to the computer and re-plugged it, but that did not work. This morning I unplugged the speaker wire from both ends - the computer as well as the monitor and replugged it. Surprise, I now have audio!!
What a relief as now I can go through the tutorials and learn how Win 8.1 works though I have already learned a lot by hit or miss.

How can I get Adobe Flash Player 11.8.800.175? 11.9 does not work on Win 7 32 bit

Win 7 32 bit allows installation of Adobe flash player 11.9, but web sites do not recognize it as being installed. Browser is IE 10. I have another computer with Win 7, IE 10, and Flash player 11.8.800.175 and it works fine. Internet connection on computer on which it works is wireless, on computer which 11.9 does not work on is wired by DSL. MCaffee antivirus on both systems, same updates; system mechanic detects no disk errors. What to do?

(Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)
(Released 9/13/2013) Flash Player 11.8.800.174 (Win IE only) (50 MB)
(Released 9/10/2013) Flash Player 11.8.800.168 (156.2 MB)
(Released 9/10/2013) Flash Player 11.7.700.242 (140.32 MB)
(Released 9/10/2013) Flash Player 11.2.202.310 (32 MB)
(Released 7/9/2013) Flash Player 11.8.800.94 (159.9 MB)
(Released 7/9/2013) Flash Player 11.7.700.232 (143.6 MB)
(Released 7/9/2013) Flash Player 11.2.202.297 (32.8 MB)
Just in case you need something older

Knowledge Search not working in Win client

hi there
i have a problem with knowledge search not working in IC Win Client in CRM version 5.0
i guess the problem is with the workspace that is IIA for solution search that is assigned against the knowledge search
please tell what should i do as right now when i am trying to execute it or open the knowledge search dump is coming stating null object referenced
i wonder what could be the solution
best regards
ashish

Hello ashish,
I had that problem too. You have to apply note 1002299 to restore missing configurations in SAF.
Also, if you worked with IIA in previous versions, take a look at note 656321 to check it's evolution (replacement by SAF).
Good luck and Kind regards,
Bruno

Wlan not working in win 10 in hyper v

Similar Messages

Maybe you are looking for