WLAN-Problem after Restart, MAC doesn't catch network again

MAC doesn't catch network automatically after restart

Hello Aldebaran21,
Welcome to the Apple Support Communities. If you are having issues with Wi-Fi, the following article will provide assist in troubleshooting the issue. It does state that is is for OS X Lion but will work for OS X Mountain Lion.
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

Similar Messages

Mac mini server problem after restart. Desperate scream out for help

Hi there....after restarting my mac mini server I have a white screen with an apple logo in the middle. Anybody here to find help with?

Mac OS X: Gray screen appears during startup

Photobooth can't be opened after restarting MAC OSX 10.9.5 upgrade

Hai all, i can't open my photobooth after restarted my MAC, it was upgraded to OS X 10.9.5. But when i used skype the webcam didn't have any problem, so i took video message with it. When i want to open the photobooth only dissapeared and never popped out into my screen. Please help me.. thanks

After you have the problem with PB, open the Console app and look for log entries associated with PB at the the time you tried and post the results here.

ACE Problem after restarting Application

Hi,
we have an ACE20 and have set it up to balance 4 Containers on a Oracle Application Server. Every time we stop all Containers at the same time for longer than an hour it takes forever (hours) until the Load Balancer starts balancing the Containers again. I can see that the ACE Module is checking the Containers in the Apache Logfiles on the Application Server and gets a 200, but still we can't access the Application for a few hours. If I connect direct to the Container it also works fine... just the ACE does not work. Like it has a timeout and is waiting.
Any idea how to give it a kick?
While accessing the Application I can see that it connects, but nothing happens...
sh conn detail
total current connections : 2
conn-id    np dir proto vlan source                destination           state
----------+--+---+-----+----+---------------------+---------------------+------+
68155      2 in TCP   191 10.200.101.73:35777   10.200.101.64:80      ESTAB
          [ idle time   : 00:00:18,   byte count : 888        ]
          [ elapsed time: 00:00:18,   packet count: 3          ]
68156      2 out TCP   195 10.200.105.33:80      10.200.101.73:35777   INIT
          [ conn in reuse pool : FALSE]
          [ idle time   : 00:00:18,   byte count : 0          ]
          [ elapsed time: 00:00:18,   packet count: 0          ]
Thanks for any help!
Jason

Hi,
I'm still having problems with the ACE Laodbalancer. At the moment it doesn't seem to recover after having restarted the Application the last time.
Can someone look at the Config and tell me if they see a mistake in it?
I have three instances accesst, accesst2 and accesst3. Each instance has 4 Oracle Application Server Containers Deployed on 2 different Apllication Servers. The Site is split between 2 DMZ which are seperated by a Firewall. The Cisco Ace has one leg in each vlan (191 and 195). We always had a problem after taking the Applcation Servers down Updates that it takes forever untill the ACE Server starts blancing agian. For the last 4 Days it hasn't started reblancing yet. As far as I know nothing has changed in the Configuration of the Server or of the ACE. The Firewall Admin said he tried t find a problem, but didn't change anything.
Do I maybe have a mistake in the ACE Config? Am I missing something here?
MS4_ACE_PU/MY-APP# sh running-config
Generating configuration....
logging buffered 7
access-list anyone line 8 extended permit ip any any
probe http HEAD_1
port 7791
interval 10
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_2
port 7792
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_3
port 7793
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_4
port 7794
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_5
port 7795
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_6
port 7796
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_7
port 7797
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_8
port 7798
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
parameter-map type http PERSIST-REBALANCE
persistence-rebalance
action-list type modify http LOCATION-RW-VIP-2
header rewrite response location header-value "http://accesst3.my-site.de:.....(.*)" replace "https://accesst3.my-site.de/%1"
header rewrite response content-lokation header-value "http://accesst3.my-site.de:.....(.*)" replace "https://accesst3.my-site.de/%1"
action-list type modify http LOCATION-RW-VIP-1
header rewrite response content-lokation header-value "http://accesst2.my-site.de:.....(.*)" replace "https://accesst2.my-site.de/%1"
header rewrite response location header-value "http://accesst2.my-site.de:.....(.*)" replace "https://accesst2.my-site.de/%1"
action-list type modify http LOCATION-RW-VIP
header rewrite response location header-value "http://accesst.my-site.de:.....(.*)" replace "https://accesst.my-site.de/%1"
header rewrite response content-lokation header-value "http://accesst.my-site.de:.....(.*)" replace "https://accesst.my-site.de/%1"
rserver host server103
description KS ApplicationServer
ip address 10.200.105.33
inservice
rserver host server104
description KS ApplicationServer
ip address 10.200.105.34
inservice
serverfarm host HTTP-APPL
rserver server103 7791
      probe HEAD_1
    inservice
rserver server103 7792
    probe HEAD_2
    inservice
rserver server104 7791
    probe HEAD_1
    inservice
rserver server104 7792
    probe HEAD_2
    inservice
serverfarm host HTTP-APPL-1
rserver server103 7795
    probe HEAD_5
    inservice
rserver server103 7796
    probe HEAD_6
    inservice
rserver server104 7795
    probe HEAD_5
    inservice
rserver server104 7796
    probe HEAD_6
    inservice
serverfarm host HTTP-APPL-2
rserver server103 7797
    probe HEAD_7
    inservice
rserver server103 7798
    probe HEAD_8
    inservice
rserver server104 7797
    probe HEAD_7
    inservice
rserver server104 7798
    probe HEAD_8
    inservice
sticky http-header TranSON_Cert_Subject group1
replicate sticky
serverfarm HTTP-APPL
sticky http-header TranSON_Cert_Subject group2
replicate sticky
serverfarm HTTP-APPL-1
sticky http-header TranSON_Cert_Subject group3
replicate sticky
serverfarm HTTP-APPL-2
class-map type http inspect match-any HTTP-INS-VIP
2 match header Host header-value "accesst.my-site.de"
class-map type http inspect match-any HTTP-INS-VIP-1
2 match header Host header-value "accesst2.my-site.de"
class-map type http inspect match-any HTTP-INS-VIP-2
2 match header Host header-value "accesst3.my-site.de"
class-map match-all HTTP-VIP
2 match virtual-address 10.200.101.64 tcp eq www
class-map match-all HTTP-VIP-1
2 match virtual-address 10.200.101.68 tcp eq www
class-map match-all HTTP-VIP-2
2 match virtual-address 10.200.101.69 tcp eq www
policy-map type loadbalance first-match HTTP-SF
class class-default
    sticky-serverfarm group1
    action LOCATION-RW-VIP
policy-map type loadbalance first-match HTTP-SF-1
class class-default
    sticky-serverfarm group2
    action LOCATION-RW-VIP-1
policy-map type loadbalance first-match HTTP-SF-2
class class-default
    sticky-serverfarm group3
    action LOCATION-RW-VIP-2
policy-map type inspect http all-match INS-PM-VIP
class HTTP-INS-VIP
    permit
policy-map type inspect http all-match INS-PM-VIP-1
class HTTP-INS-VIP-1
    permit
policy-map type inspect http all-match INS-PM-VIP-2
class HTTP-INS-VIP-2
    permit
policy-map multi-match SLB-logic
class HTTP-VIP
    loadbalance vip inservice
    loadbalance policy HTTP-SF
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
    appl-parameter http advanced-options PERSIST-REBALANCE
class HTTP-VIP-1
    loadbalance vip inservice
    loadbalance policy HTTP-SF-1
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
    appl-parameter http advanced-options PERSIST-REBALANCE
class HTTP-VIP-2
    loadbalance vip inservice
    loadbalance policy HTTP-SF-2
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
    appl-parameter http advanced-options PERSIST-REBALANCE
interface vlan 191
ip address 10.200.101.65 255.255.255.0
alias 10.200.101.67 255.255.255.0
peer ip address 10.200.101.66 255.255.255.0
access-group input anyone
service-policy input SLB-logic
no shutdown
interface vlan 195
ip address 10.200.105.65 255.255.255.0
alias 10.200.105.63 255.255.255.0
peer ip address 10.200.105.66 255.255.255.0
access-group input anyone
no shutdown
Destination         Gateway          Interface         Flags
10.200.101.0/24     0.0.0.0          vlan191           IA [0x30]
10.200.105.0/24     0.0.0.0          vlan195           IA [0x30]

Problem with restarting mac

After restarting the screen stays grey

And, what version of OS X is installed? The issue is that possibly some OS files are damaged preventing OS X from loading. If so then the first thing to do is boot from an installer disc, use Disk Utility to repair the hard drive and permissions, then reinstall OS X.
The other possibility is that the hard drive has failed or there has been some other hardware failure. In this case take the computer in for service.

Hp 620 connection randomly lost,after restart sometimes comes back then goes again

Randomly wireless connection goes away.And says not connected and no connection available.Wireless button stays always white and doesnt respond . After restart sometimes connection comes but then goes again after 1-2 minute.Network adapter looks like works fine.there is no sign on that.but i cant connect to the internet via wifi. I dont know what to do . Please help me to solve this problem

@ayazgurbanov
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Mac mini 10.7.4 update problem after restart

Hi,
As I always do for every OS X update, I download the combo and apply the update, one of the many reasons for doin so is my very slow internet connection,
What wasn't my surprise when after making the restart, my Mac mini takes me to an OS X install assistant...
What went wrong and why?

Sounds like Disk Corruption, not sure what OS, but...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

Windows 7 boot problems after partitioning Mac Disc

Hi
I got a big Problem. I installed Windows 7 with Bootcamp. I have a 600Gb Mac Partition and a 150Gb Bootcamp Partition.
After Configuring Windows, I switched to the Mac OSX Snow Leopard System. I changed the Main Partition of 600Gb into 3 smaller ones. After this change I can't boot Windows 7 anymore. With the Option Key it doesn't show me the Bootcamp Partition. In the Sys. Preferences under Startup Disk it show me the Windows on Bootcamp Partition, but when I click restart, it shows me only the No System Disk Boot black screen.
I read a bit in the forum, but I haven't found the problem yet.
Thx for your help
NESTi

Your problem is quite clear and simple: you added and changed the parition numbers and table.
You want a linux style with a slice for swap, root, usr and data?
Use Mac's new Recovery - command d on startup.
Enable viewing hidden partitions in Disk Utility.
Use Windows DVD to fix and edit BCD
What you did is not supported. I know XP can't boot unless it is partition #4 or lower.
There is 200MB GPT, 128MB EFI, HFS+ 600GB would have been 3rd but GPT is zero, only now you have three where there was one.
Manage all partitions with Disk Utility in OS X
Check partition table health in Lion's Disk Utility
BCD for Windows 7 and Lion

Login problem after locking Mac overnight

We have a number of Mac users who are experiencing a similar login problem and we're at a loss to understand why. We are having the same issue on MacBook, MacBook Pro, Mac Pro, and iMac. Most are using 10.5.6, a few earlier versions. Most have the lastest updates, a couple don't. Each has different energy saving settings as well. So, the issue seems to affect different computer conditions. Also, one user has reset the SMC, but that doesn't work for the Mac Pros, so that's probably not the issue. Below is the original email I got from a user so you can see exactly what is happening.
"I lock my screen when the screensaver is enabled and it works perfectly except when I leave the system locked for a day or more. After being locked for a long period of time it takes a very long time to unlock. For example, I leave at 3PM on Friday afternoon and lock the machine. When I arrive at 8AM on Monday morning it always takes 5-10 minutes unlock the machine. I enter my password and it appears to be attempting to check the password but it just sits there until it eventually fails and says “Please try again.” My password is still entered so I just click “Okay” and it logs me in instantly."
If anyone has any suggestions, I would appreciate it.

joefox2003 wrote:
Thanks for the reply. In answer to your question though about shutting down, the users sometimes need to remote into their computer, so shutting down is not really an option.
How do I view the console logs?
In the utilities directory, run console.app
You can search by date or look at the various logs - error logs, normal logs, etc.
If I do find that one or more applications are causing a problem, is it then just a matter of sutting them down before logging off? It is just kind of unusual in my opinion that this is affecting so many users running so many variations of software, computers, etc.
It may be one app thta is common to all the computers. If an app is not properly written, it may cause a problem if it is forced to shutdown from an external program. When a computer shuts down, there is a signal sent out but unless the app responds to it properly, the app may essentially undergo an unexpected forced shutdown and when restarted need to recover.
Also, if for some reason the Leopard filesystem is flagged as not being properly shutdown, it may run an fsck upon boot, which takes some time, or it may simply copy journaled data which is faster but also make the restart appear slow. These items should show up in the console logs.

App store blank after restarting Mac during 'Critical Security Update' for 10.9.2

Hi - this is definitely a self inflicted problem however it took me by suprise, and I wasn't sure if it was an official Apple update or some kind of new virus... I was browsing Safari when the notification came up 'Critical security update' which was weird to me as it didn't look like a standard notification, so I clicked 'later' (or equivalent) but my entire screen faded out to grey and it started updating anyway. So naturally I panicked and force shut down my computer, mainly because it was unlike any update I had encountered. After scouting around online I decided to turn it on again, and everything seems to be working, however my app store is totally blank apart from the main icons (featured, purchases, icons, etc). I now can't update it at all let alone download any new apps. I'd really appreciate any help!

Hi anto321,
Thanks for visiting Apple Support Communities.
If your computer was shut down during an update, I recommend first starting up into Safe Mode:
Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
Safe Mode is a way to start up your Mac that performs certain checks and prevents certain software from automatically loading or opening.
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
Best,
Jeremy

Boot issue after shutdown plus power - no problem after restart or after removing power cord

Hello,
I have a Pavilion Elite m9275.nl desktop. I experience boot issues after a regular shut down.
After a regular shut down and pressing the power button within a few seconds/minutes, it keeps hanging in the HP startup / BIOS screen, Windows 8 won't boot, the hard drive light doesn't flash;
After a restart from Windows (instead of shut down) it boots correctly from the c-drive. No hard-drive problems at all;
After a shut down and removing the power cord for 10-15 minutes, it boots correctly from the c-drive. No hard-drive problems at all.
When the PC does not boot, F10 (to enter BIOS settings) does not work neither, so it seems to be a hardware or BIOS issue.
I already replaced the CMOS battery and already loaded default BIOS settings.
During a succesful boot or after pressing F10 (to enter BIOS settings) the screen shows some disk information right after the BIOS. This is the screen that says something like "press CTRL-I to start configuration utility". During a succesful boot the hard disk light flashes shortly before displaying that screen. During an unsuccesful boot the hard disk doesn't flash.
Before replacing a hardware component, I need to know what to replace...
Could it be the hard disk controller or hard disk is defect?
Where is the hard disk controller stored?
Can I upgrade the firmware of the hard disk controller?
BUT: why does it work when I remove the power cord for 15 minutes or after a restart (instead of a shutdown and than pressing power)?
Many thanks in advance,
Sjoerd-Jaap Westra

sjwestra
I apologize for the delay in responding to your post. First I am glad you were able to resolve your initial issue and to help I have included a link to a document 'Bios Setup Utility Information and Menu Options' that will provide you with instructions on how to enter the Bios and provides additional information on navigating it as well.
http://goo.gl/HIclUV
If you need any further information please re-post.
Thank you for your post.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

MSI GX740 develops unusual problems after restart!

Upon restarting my computer after downloading a couple of windows updates, I immeadiatley noticed something. A lot of the keys on the keyboard aren't being recognized. I'm not sure why this is happening. It's been over a week and nothing is changed. For example: A,S, and D work but W doesn't! Other keys aren't functioning either. I have to use my on-screen keyboard now, which is a major drag. I can't play any sort of game. One thing I want to assure you of is this laptop has NEVER been exposed to liquid damage at anytime. I keep beverages far away from my baby at all costs. This is why I'm so confused. Half of the keys are inactive. I feel like I have no options left but to request an RMA form. How do I go about solving my problem? Please help me...summer is coming up and I don't want to be left like this. Oh, and also, the computer is coming up on just about 8 months old, so I can't imagine what's going on here. Anxiously awaiting replies...
Thanks you MSI,
Rusty

There is no MSI here, only users.
As for the keys, I doubt the problem is Windows updating, more like a broken keyboard.
Contact MSI for repairs.
However, gaming on a laptop keyboard is never a good idea, better connect a USB keyboard.

Problems after restart Windows 8.1

Hello,
I've installed Windows 8.1 pro in my laptop.
After I restart Windows 8.1 (Not Turn-off and on) and log on it, the problem is occurred.
Windows does not response and show any dialog about system, for example Control Panel, gpedit.msc, msconfig...etc
and anti-virus program(avast!), some messanger, Bluetooth, Intel Smart Connect Technology, which should be started automatically, are not started.
But I can execute Google Chrome, Microsoft Outlook, Eclipse... etc... without performance issue. It's truly normal!!
After 5 ~ 10 minutes, Windows 8.1 become fully normal state. the above problem doesn't appear any more.
Of course, if I restart my laptop, the problem will be occurred again.
The problem doesn't occur once I turn my laptop off and on manually.
Plz let me know, how can I fix the above problem!! I love all features of Windows 8.1, don't want to back Windows 7.

Hi,
Please check Startup option in Task Manager if there is any items that relate with these application. If so, try to disable them for test.
Clean boot is a good way to diagnose this problem. Please have a try.
Roger Lu
TechNet Community Support

Problem after restart nodes

I have 2 nodes. After instlation everything works OK, but when I must restart my nodes (RHE4) cluster doesn't work :/
When I write crs_stat -t then STATE is unknow in line with:
ora.....CRM.cs
ora....db1.srv
ora.rac1.gsd
Then I try check srvctl status nodeapps -n rac1:
GSD is not running on node: rac1
so I try this: srvctl start nodeapps -n rac1 then failed:
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.rac1.gsd' has placement error
What can I do??
Message was edited by:
user584507

This is my crsd.log:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005
Oracle. All rights reserved.
2007-07-06 16:50:15.523: [ default][3086931648][ENTER]0
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2004,
Oracle. All rights reserved
2007-07-06 16:50:15.524: [ default][3086931648]0CRS Daemon Starting
2007-07-06 16:50:15.526: [ CRSMAIN][3086931648]0Checking the OCR device
2007-07-06 16:50:15.558: [ CRSMAIN][3086931648]0Connecting to the CSS
Daemon
2007-07-06 16:50:15.690: [ COMMCRS][65735584]clsc_connect: (0x8659368) no
listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_crs))
2007-07-06 16:50:15.690: [ CSSCLNT][3086931648]clsssInitNative: connect
failed, rc 9
2007-07-06 16:50:15.690: [ CRSRTI][3086931648]0CSS is not ready. Received
status 3 from CSS. Waiting for good status ..
2007-07-06 16:50:16.754: [ COMMCRS][65735584]clsc_connect: (0x8605168) no
listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_crs))
2007-07-06 16:50:16.754: [ CSSCLNT][3086931648]clsssInitNative: connect
failed, rc 9
2007-07-06 16:50:16.754: [ CRSRTI][3086931648]0CSS is not ready. Received
status 3 from CSS. Waiting for good status ..
2007-07-06 16:50:17.817: [ COMMCRS][65735584]clsc_connect: (0x8658b78) no
listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_crs))
2007-07-06 16:50:17.817: [ CSSCLNT][3086931648]clsssInitNative: connect
failed, rc 9
2007-07-06 16:50:17.819: [ CRSRTI][3086931648]0CSS is not ready. Received
status 3 from CSS. Waiting for good status ..
2007-07-06 16:50:21.630: [ CRSD][3086931648]0Daemon Version: 10.2.0.1.0
Active Version: 10.1.0.2.0
2007-07-06 16:50:21.630: [ CRSD][3086931648]0Active Version is less than
Software Version
2007-07-06 16:50:21.631: [ CSSCLNT][3086931648]clssgsGroupJoin: CSS has not
reached fatal mode.Registration is not yet safe. Retrying
2007-07-06 16:50:22.634: [ CSSCLNT][3086931648]clssgsGroupJoin: CSS has not
reached fatal mode.Registration is not yet safe. Retrying
2007-07-06 16:50:23.637: [ CSSCLNT][3086931648]clssgsGroupJoin: CSS has not
reached fatal mode.Registration is not yet safe. Retrying
2007-07-06 16:50:24.639: [ CSSCLNT][3086931648]clssgsGroupJoin: CSS has not
reached fatal mode.Registration is not yet safe. Retrying
2007-07-06 16:50:25.643: [ CSSCLNT][3086931648]clssgsGroupJoin: CSS has not
reached fatal mode.Registration is not yet safe. Retrying
2007-07-06 16:50:26.647: [ CSSCLNT][3086931648]clssgsGroupJoin: CSS has not
reached fatal mode.Registration is not yet safe. Retrying
2007-07-06 16:50:27.650: [ CSSCLNT][3086931648]clssgsGroupJoin: CSS has not
reached fatal mode.Registration is not yet safe. Retrying
2007-07-06 16:50:28.653: [ CSSCLNT][3086931648]clssgsGroupJoin: CSS has not
reached fatal mode.Registration is not yet safe. Retrying
2007-07-06 16:50:29.656: [ CSSCLNT][3086931648]clssgsGroupJoin: CSS has not
reached fatal mode.Registration is not yet safe. Retrying

WLAN disabled after restart or sleep on Satellite A100

Hi, how to solve this problem?
After reboot or sleep, hibernation I must manually reconnect WLAN (turn off and again on switch on right side) to use internet again.
Can WLAN reconnect somehow automatically?
Thanks.

Hi
Usually the notebooks should connect automatically after wake up from hibernation or standby.
This is not problem on my Satellite M40.
But I think it depends on the WLan card which is used in the notebook.
My M40 supports the Atheros card and I use the Atheros client utility instead of own Windows WLan configuration option to connect to the router.
Maybe you should try to establish the WLan connection using the additional WLan configuration utility like Intel ProSet for Intel cards or as spoken above Atheros Client utility for Atheros cards.

WLAN-Problem after Restart, MAC doesn't catch network again

Similar Messages

Maybe you are looking for