WLAN showing up as 802.11a/g but not 11n

Using a wifi scanner like Metageek inssider or chanalyser, I'm seeing one of our WLANs as only 802.11a or g but not 802.11n like it should be.
All the other SSIDs on that AP/controller are showing as 802.11n. I can't for the life of me think how this could be, but the scanner is showing the top data rate as 54Mbps. Connect to another SSID and it shows the upper data rates as well. 
Any ideas why this would be? Typically this just happens to be our main SSID. Is it just the scanner interpreting things wrong? I've looked at the controller and the upper data rates are enabled for 802.11n as well as 40MHz for the 5GHz radio.

It's WPA2/AES but WMM is not allowed (Cisco TAC had me remove that option to resolve a bug).

Similar Messages

  • HT2513 my iCal shows events in the "month" view but not in the "week" view? why is that?

    my iCal shows events in the "month" view but not in the "week" view? why is that? doesnt sync automatically all the time only sometimes

    my iCal shows events in the "month" view but not in the "week" view? why is that? doesnt sync automatically all the time only sometimes

  • Table borders show up with Firefox or IE but not Safari (Win or MAC)

    This very simple site (http://www.brandondean.net) has two table borders that show up under FF and IE but not Safari (either Win v4.0 or Safari for MAC, same result). I'm not an expert but I did the work using Dreamweaver 2004 MX as XHTML compliant, tested every page at W3C.org to make sure they comply with XHTML, and they do (except for my not putting in "alt" on images). I even downloaded Dreamweaver CS4 to run the "clean up the code" command and nothing is fixing the problem. I'm hoping someone out there has seen this before and can help us out. Thx.

    Hi Gary,
    It's probably just because the border widths you are specifying are too small (or WebKit is interpreting picas differently to Firefox/IE - I say WebKit as the same problem is visible in Google Chrome and that uses WebKit like Safari as well).
    Try setting using this instead:
    .borders {
    font-family: Verdana;
    font-size: 10px;
    font-style: normal;
    font-weight: normal;
    font-variant: normal;
    color: #cccccc;
    text-decoration: none;
    border: 1px solid #888888;
    That seems to do the trick for Firefox and Chrome on this Linux machine I'm using at the moment.

  • When I down loaded some ring tones they show up in my Music folder but not in my ringtones?

    When I down load some ring tones I purchased they show up under my Music Icon but not in my ringtones

    Where did you download them from? Did you drag them from the Music folder to the Ringtones folder?
    iOS devices use MPEG4 audio (AAC) for ringtones. Often these files end with .m4a, but the .m4r suffixe is generally used to denote a ringtone. iOS expects a ringtone to be less than 30 seconds in length and otherwise the only other restriction is that it's an AAC audio file.
    You can make your own ringtones simply enough with any audio editing application on the Mac. Just create an MPEG4 audio stream, give it the suffice .m4r, and drag it into iTunes.

  • How to show attributes only in query panel but not in Add fields.

    Hi,
    Jdev - 11.1.1.7.0
    I have a requirement where I need to show attribute only in search panel but not in Add Fields list which is available in advanced section.
    Thanks for your time and help.
    Regards,
    Dileep.

    Hi,
    Is it really possible implement this kind of scenario, I could not find any property to disable the attribute only 'Add Fields' but not in query panel.
    Please some one confirm me this behavior.
    Thanks,
    Dileep.

  • I bought a 5 yr old Mac G5 OSx 10.4.11, 2 GHz intel Core 2 Duo processor, 1GB 667 MHz DDR1 SDRAM memory.  It works fine but I can't get Thunderbird, Flash Player or Adobe reader to install -- it shows up on desktop as download but not App folder. Why?

    Question:  I bought a 5 yr old Mac G5 OSx 10.4.11, 2 GHz intel Core 2 Duo processor, 1GB 667 MHz DDR1 SDRAM memory.  It works fine but I can't get Thunderbird, Flash Player or Adobe reader to install -- it shows up on desktop as download but not App folder. Why?

    The downloads are probably .dmg files (disk images).  You would open the disk image (double-click it) to find the application or an installer.  If it's the application itself, you then drag the application to your Applications folder to "install" it.  If it's an installer, double-click the installer to run the installer that installs the application.
    NOTE:  If you iMac is Intel, it's not a PPC G5.

  • I had purchased Imovie today I can find the icon movie it click it but it will not open. Its shows up in docs and purchased but not apps? how do i add it to my bar and open it?!

    I had purchased Imovie today I can find the icon movie it click it but it will not open. Its shows up in docs and purchased but not apps? how do i add it to my bar and open it?!

    Exactly where are you clicking, you need to be specific. For example, are you using the Dock, the Applications folder, Launchpad, etc. to attempt to start teh app? Also IOS 7.1.2 does not run on a Mac, what version of OS X is installed on your computer?

  • App world is showing up in my applications management but not on my actual blackberry

    Hi I have a blackberry bold 9780, a few months ago when I received this phone from my parents it had a blackberry app world update. Ever since I tried updating it the blackberry app world is showing up in my applications management but not on my actual blackberry (if that makes sense). I have tried unistalling and reinstalling, taking battery out to reset. Is there anything I can do to get it back as its starting to annoy me now

    Hi x_cakemaker_x
    Sorry One post is enough for the same issuue    http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/blackberry-app-world-not-showi...
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Does photosmart d110a have 802.11a? If not, does it have 802.11n?

    Had it connected via b/g WiFi but it doesnt seem to connect with my new router even though ive checked all settings. The manual and cd are useless, and hp site's specs for this photosmart are useless. Appreciate your help if you can find out if it's 802.11a or n compatible.

    Hi,
    Did you ask this question yesterday ? Your printer is NOT networkable without buying more hardware:
    The following table lists connectivity options.
      Series                                                               USBWireless    NetworkWired Network (Ethernet)
    HP Photosmart e-All-in-One D110a Printer
    Yes
               No
                 No
    HP Photosmart e-All-in-One D110b Printer
    Yes
                No
                 No
    In short, it does NOT have wired and wireless adapter.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My apple iphone 4s wont charge! its showing that the power is connected, but not showing that its charging! phone is turned off and now wont turn on

    I phone 4s is not charging, its showing that the power is connected, but still not charging

    Hi Sharky,
    First, I would make sure you are charging using the wall adapter and cable that came with your phone.  Plug into wall outlet.
    If it was completely drained it can take about 20 minutes for it to fully get enough power back to even start up.
    After about 20 minutes of charging in the wall outlet try turning it on like normal.
    If it doesn't respond by just pushing the power button, try pushing and holding the power and home buttons together for about 15 seconds to see if it will startup.
    John

  • My album artwork is showing up in my itunes library but not in itunes under ipod:music. help

    When I'm in itunes my album artwork shows up in my library. But if  i'm in itunes under my ipod:music it will not let me sort by Album, only Album by Artist, and absoluetly no artwork is there.help!

    Even if you somehow lost the iTunes app and your OS, unless you reformatted the hard drive to restore, your song files (the iTunes data) may still be there.  Look in your user home folder Music folder, for a folder called iTunes, and then iTunes Media.  If you see that folder, your song files may be in there.  If the hard drive was reformatted, obviously, nothing from before will be there.
    For your question, iTunes syncing is generally one way, from the computer's iTunes library to the iPod, by design.  You cannot use iTunes to transfer song files from iPod to computer, except for songs purchased from the iTunes Store.  However, there are third-party methods and utilities that can transfer from iPod to computer.  If you do an Internet search on something like "ipod transfer," you should get some links.  (The CNET article seems to be popular.)
    Once your iPod's song files are on the computer's drive, you can add them to your current empty iTunes library.

  • HT1391 Purchases show in the Playlist folder /Purchases, but not anywhere else in the Library Album, etc: - how do you get them to show there?

    Songs that I have purchased and downloaded show in the Playlist folder under "Purchased", but not in the Library under Artist, Album etc:.  What do I need to do to have them show under Artist, etc;?

    Download the free iTunes Single of the Week...
    Sounds a bit voodoo I know, but it has a good strike rate.
    tt2

  • My ipad 2 won't update apps. It shows that 2 apps need updating, but not which ones.

    My iPad 2 won't update apps. It shows that 2 apps need updating, but doesn't show which 2.

    Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
    According to Fly150 in another discussion, this is a workaround - for the time being.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store.

  • Applications not updating just show icon with line through it but not responding

    App Store shows 6 updates available.  Clicked on update all and now it is just in a frozen state.  The icons for the Apps are dim with the line that is traditionally there when updating, but nothing is happening.  If I click on the icons it say Unalbe to Download Application at this time.  I have checked and am able to update Apps on my iPhone but not iPad.  Any Ideas???

    Suzan-
    Are you able to access the internet using Safari?  If not, you may be having a problem with the iPad's WiFi connection.  Try unplugging the WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.
    If you are updating Apps from the App Store App on your iPad, you might also try updating by using iTunes on your computer.
    Fred

  • PC is showing realtk high definition audio working but not showing not plugged in

    computer is a hp pavillion a6763w desktop PC. 
    i had installed a ati video card and all worked perfectly for a while after updating the drivers for it my onboard sound went out. the sound would play through the hdmi output but no other output. i uninstalled video card and drivers and reverted back to old drivers. did a restore point. reset the bios to enable onboard sound. reinstalled drivers for onboard sound. tried installing a sound card and it was not recognized by the computer. but still PC is showing realtk high definition audio working but nothing plugged in when it is. also i have tries several different devices being plugged in and none of them worked. 

    Hi,
    When installing a discreet sound card, you should disable on board audio.
    With HDMI, you have to chose speakers or HDMI but not both. It's one or the other.
    What ATI video card are you using and did you upgrade your power supply?
    Did you go to www.realtek.com and download the latest audio drivers when using the on board audio?
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

Maybe you are looking for