Wlan synch for iPad does not work

Hi
Has anybody any idea how to solve my problem:
WLAN synch is actitived for both my iPhone and my iPad, it is activated via iTunes and appears to be switched on on both devices. When I open iTunes (latest version of course) it does immediately recongize te iPhone and starts to synch, it does not anymore recognize the iPad.
I have tried many things, made sure the the same itunes account (of my two) is activated, I have checked that the device is active (i.e. not locked), checked and compared settings ... no idea where the problem my may be.
When I then attach the iPad to the MBP then it works, I can even disconnect the cable and synch continues.
When I shut down the MBP, the next time I have the same problem again ...
ITunes even synchs with my iPhone, when it is NOZ connected to power, but it does not want to recongize the iPad.
And going to the settings on the iPad doesn't help either: when I go to WLAN synch I can press "synch now", then it starts to search my MBP but it seems not to find it and then stops after some time.
Any help is appreciated.
Best regards
Diethard

Are you putting the head set into discovery mode before you try pairing it to the iPad?

Similar Messages

  • My email verification for psn does not work...

    My email verification for psn does not work... [email protected] SORT IT OUT SONY.
    Have had a ps4 since xmas day and am still yet to use it.

    1. You must send access code to a phone number that can receive SMS
    2. You can only use one phone number per iPad; cannot share one number with two devices

  • Short key for copy does not work all the time now.

    After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time.  It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac.  Please help.

    I've plugged in my default mac keyboard and the short key copy still does not work.

  • I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed. The serial # for 13 does not work. Any thoughts on how I can get a number for PSE 12?

    I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
    The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?

    Hi
    There is a newer version of Resolution+ Plug-in released for an Qosmio X series
    [Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
    try it out...
    If it has not been installed properly, try rebooting your computer and reverify.

  • Reflow in Adobe Reader for Android does not work

    The reflow option in my Adobe reader for Android does not work. The PDF book I am trying to read is too wide to be legible when I fit it into the screen (even in landscape), but the reflow button doesn't change that. When I click it, nothing happens. The only thing I know to do is to uninstall and re-install, but that did not work. Any other tips or ideas?

    Mehwish,
    Thank you so much for responding, and so quickly. I appreciate it.
    It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
    I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
    Thanks again for you help.
    Stan
    Dr. Stan G. Duncan
    123 Sumner St.
    Quincy, Massachusetts 02169
    617-855-7539 (hm)
    781-504-6875 (cell)
    215-647-7583 (fax)
    508-295-1630 (Ch)
    <mailto:[email protected]> [email protected]
    <http://homebynow.blogspot.com/> http://homebynow.blogspot.com
    <http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan

  • Early Adopter release : Extract DDL for tables does not work

    Hi,
    just had a look at Raptor - really nice tool - easy install - could be a replacement for SQLnavigator for us. One or two things I noticed though ...
    1)
    Export->DDL for tables does not work throws following error
    java.lang.ClassNotFoundException: oracle.dbtools.raptor.dialogs.actions.TableDMLExport
         at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at oracle.ideimpl.IdeClassLoader.loadClass(IdeClassLoader.java:140)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:164)
         at oracle.dbtools.raptor.dialogs.BasicObjectModifier.launch(BasicObjectModifier.java:142)
         at oracle.dbtools.raptor.dialogs.BasicObjectModifier.handleEvent(BasicObjectModifier.java:210)
         at oracle.dbtools.raptor.dialogs.actions.XMLBasedObjectAction$DefaultController.handleEvent(XMLBasedObjectAction.java:265)
         at oracle.ide.controller.IdeAction.performAction(IdeAction.java:530)
         at oracle.ide.controller.IdeAction$1.run(IdeAction.java:785)
         at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:804)
         at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:499)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
         at java.awt.Component.processMouseEvent(Component.java:5488)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
         at java.awt.Component.processEvent(Component.java:5253)
         at java.awt.Container.processEvent(Container.java:1966)
         at java.awt.Component.dispatchEventImpl(Component.java:3955)
         at java.awt.Container.dispatchEventImpl(Container.java:2024)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
         at java.awt.Container.dispatchEventImpl(Container.java:2010)
         at java.awt.Window.dispatchEventImpl(Window.java:1774)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    and 2)
    when I click on a package body - I get "loading ..." below it but it never puts the
    procedure names in and the "loading ..."message stays in the tree view - however you do get to see the packages in the source window.
    Realise this is very much a work in progress and am grateful to see an early release such as this. Looking forward to the production release.
    Best regards,
    David.

    OK thanks for looking ....you've obviously got the fixes on your to do lists
    Noticed that the SQL tab when you select an object works fine - displays the
    DDL for the object
    Do you think you'll have functionality so you can select many objects (shift left click) and
    then create a DDL script for them? It looks like you can do this for all objects in a schema but
    the ability to select a subset of objects in a schema would be very useful for our DBA's.
    Couldn't see any good reason for keeping using SQLNavigator
    Many congratulations on producing such a useful tool.
    Kind regards,
    David.

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • The Help Tab (OSX ML) where you search for something does not work

    If I click "Help" and then search "expand" it will show me where expand is. But in CS6 when I clicked it the command would go through and pull up the page to expand pixels. Instead, I have to go find it. It works in every other Adobe app I use except Photoshop CC.
    I am on the latest version and on CC

    Hi Peter
    Thanks a lot for your help (and sorry for not having answered quicker, but my boss gave me a more urgent task last week...).
    Anyway, I did what you suggested (re-importing into a brand new project), and then the search for synonyms really worked! But, being a sceptical person, I did the same with another project, and with that one, it did not work. So, what I did next was compare all the settings of these two projects, and I found a difference.
    RH8 now contains a function that's called 'Teilzeichenfolgensuche' (I don't know the English expression, but have a look at the attached picture: this is a screen shot from the second page when I generate WebHelp). After having done several tests, I came to the following conclusions:
    Search for synonyms does not work in HTML-Help, but it does work in WebHelp (and maybe others, but they are not relevant for me, so I did not test them);
    Search for synonyms does only work, when the function 'Teilzeichenfolgensuche' is NOT activated.
    Could maybe somebody test this, too, and post here whether my conclusions are really correct?
    Btw: This fact is not mentioned in the RH-Manual; actually, this function 'Teilzeichenfolgensuche' is not even mentioned there (at least not in the German edition)!!!
    Can hardly wait to see your feedback; thanks again for everybody's support!
    Kurt

  • After sending sound from find my iphone, now ipad does not work

    after sending sound from find my iphone, now ipad does not work
    it can't be unlock and scrren is blank, only siri works

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.

  • My ipad does not work. can somebody help me??

    my ipad does not work...
    can someone help me???

    Hold down the Home and Sleep buttons until a white Apple Logo appears on your screen.  Make sure it is charged up as well.

  • Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • ICloud on my iPad does not work in iOS 8

    Hi all,
    I have a problem with iCloud after upgrade to iOS 8 on my iPad. I have updated from IOS 7 to 8 without turning on the iCloud Drive feature (because of the Mavericks on my Macbook Pro in that time).
    Applications like “Pages”, “Numbers”, “MindNode Pro” or “Textastic” (and it seems that all applications using documents in iCloud) stopped working. For example MindNode Pro tells me that "iCloud is not configured on my device”.
    I have tried turning off/on iCloud, resetting the device and the problem is still there - I am not able to access my iCloud documents on my iPad (the Mac OS X versions of the apps works fine). I have upgraded to Yosemite, so I have also turned on the iCloud drive hoping that it will solve the problem… it does not :-(
    Maybe there is some problem with my account, because the Family sharing behaves strange (it created all the calendars, memos, photo streams, etc. twice), and there is a big issue with ENABLING the iCloud DRIVE - this process NEVER ENDS — When I turn the iCloud Drive “on” on my iPad the window with “Turning On iCloud Drive…”. Even after few hour of waiting, this window does not disappear. I can close the preferences app and continue to work with other apps, but the problem with documents in iCloud remains.I have tried hard-resetting my iPad, turning off/on my iPad, disconnect it from my apple id a login again, reinstalling the applications and nothing helps. I am currently running the latest iOS version.
    Another strange thing (maybe related to this problem) is, that in Yosemite I cannot se all the folders in my iCloud drive, here is an example from my Finder:
    Here from MindNode Pro (Mac OS X version) - notice that it is able to open its folder, which is not listed in the iCloud (see above):
    This is what I can see through the icloud.com website (there are items which are not listed in the Mac OS X):
    So, I think that my iCloud is probably in some inconsistent state...
    I am not able to find any Apple support email - I have tried [email protected], but it does not work (email returned with message "this email address aren’t monitored”).
    Zdenek

    Here's a better version:
    When I try to initiate or receive a call via Sony MDR-EX100iP headphones/mic (that worked perfectly with iOS 6 and iOS 7), on iPhone 4S running iOS 8, I hear crackling static and the person on the other end of the line can't hear me.
    I suppose that because I can make a hands-free call using the Apple headphones/mic, Apple will tell me that there's not an issue.  However, the Sony MDR-EX100iP headphones/mic worked much better for me than the Apple headphones/mic, so I'm in a bit of a quandry...
    BTW - It's really lame that you can't delete or even edit a posting once you submit it...

  • Keynote presentation on iPad does not work

    I got my iPad and I have bought the keynote app....but when I upload an keynote presentation on to the iPad and I open it via the keynote app I get a list with 7 incompatible things which do not work on the iPad....I have paid for the app and it does not work....I do not understand.

    I would prefer to use my keynote presentation as I have created it.
    That is not always possible -- hence the note from Apple.
    Here is where you can tell Apple what you would like changed about this:
    http://www.apple.com/feedback/keynote_ipad.html

  • ISO 7 move and scale photos for wallpaper does not work

    Move and scale photos does not work when using photos as wall paper

    What a nightmare! Had I known what was in store for me, I would never have updated my iPAD Mini to iOS7.
    The calendar with it's ultra-thin Helvetica is near impossible to see. To add insult to injury, not being able
    to move and size a wallpaper photo is just totally unacceptable. So annoying when software is thrown out
    there for the general public when it's obviously not ready. I tried the solution:
    Go to Settings > General > Assessibility > Reduce Motion "set to OFF" 
    Next, in Settings > Wallpapers & Brightness > Choose Wallpaper (pick the wallpaper) - you should now be able to "Move and Scale" the photo that you've chosen for your wallpaper. 
    After you've SET the wallpaper, you can go back to Parallax motion by turning Reduce Motion to "ON" (see step 1)
    And it just DOES NOT WORK. Plain and simple. I am so tired of Apple products that have bugs that we are all expected to work through and work out while paying anywhere from $500 to $2000 for a product. And of course you can't get online support in a quick, efficient manner. My big old $600 bite out the Apple is tasting mighty sour at the moment.

  • IPad does not work.

    One-year-old mini iPad is Fried, it will not start.
    I am very upset and I'm about to give up on Apple products -I have several products and never had trouble with any of them until now.
    I tried technicians in the store and technicians on the phone and cannot restore or plug-in, does not work.
    Apple wants $220 to get it fixed. For that price I might as well buy new one, but at this point I will buy a different brand.
    Very disappointed.

    What do you mean it is fried?  In what way?  Have you tried a reboot by holding both the power and home buttons until the apple logo appears?

Maybe you are looking for