WLAN trouble with PEAP network!

I'm trying to connect to Purdue University Calumet's PEAP Network and I am receiving the Authentication Failed error.
Anybody good with that stuff?
And you can tell me where i'm messing up??
The People incharge of setting up WLAN don't know anything about Symbian Phones, Just they idiots pretty much.
All they knew was Windows Mobile Set up.
Data Bearer: Wlan
Network status: Public
Network Mode: Infrastructure
Security mode: WPA/WPA2
Security Settings:
WPA/WPA2: EAP
WPA2 Only Mode: Off
EAP Plug In Settings:
1. EAP-PEAP
EAP-PEAP:
Personal Certificate: Not Defined
Authority Certificate: School Uses [Thawte Premium Servers].
Username in use: User Defined
Username: [username]
Realm in use: User Defined
Realm: blank, school doesnt have one.
Allow PEAPv0: YES OR NO??????????????????????
Allow PEAPv1: YES OR NO?????????????????????
Allow PEAPv2: YES OR NO?????????????????????????

Hi,
did you get it working all right?
My understanding is that it shouldn't matter if you have more of them enabled in the phone. As long as the one which the server wants to use is configured properly, things should work out.
Did some quick browsing, you can check more info from here: Extensible Authentication Protocols
2110i | 3110 | 6110 | 6210i | 9210i | N95

Similar Messages

IPad2 got a terrible trouble with 3G network after updateing to IOS5.1.1

Hello guys, I got a terrible trouble with 3G network after updateing to IOS 5.1.1. Now when I turn on my cellular data, the iPad 2 can say the carrier and 3G on the left top. But when I tap the Safari, it turns to be:"PDP authentication failure". I did the update to 5.1.1 last night, before that every thing is fine, and now I can't use my 3G at all.
Could anyone please tell me what's happing and what should I do???
Thank you so much!

Hi Miky. After upgrading to ios 5.1 I had the same problem.
I reset the APN on network settings and rewriting the same. iPad now working on 3G.
My operator is 3 ITA
iPad 1 64 GB Wi-Fi + 3G

Trouble With mouting network share

We got this problem on 3 mac who are in 10.3.9
When the user mount a network share, ok no problems.
When he want to mount a second share the first one disconnect.
the alias on the desktop dissapear, but the one on the left panel of the finder stay, and it's impossible to remount it because, the share stay on /Volumes/
i tried to remove it => impossible sill reboot.
i got another problem on these machines with mounting network sharing.
When i select a share on the dropdown list, it mount the one who's before.
i did a onyx, diskwarrior repair permission etc ...., other ideas ?
Thank you

No idea ?

Having trouble with social networks and connection issues

My iPad won't load any pictures on facebooks website, or the app. It will load google pictures but on Facebook they come up as a blue question mark and it also won't let me log into intagram or snapchat, it says check your network connection. Also my app store won't load. Is there anyway to fix this? I restarted my iPad multiple times and cleared all cookies and data but it didn't help. I had a provisioning profile from an GBA emulator awhile back and I deleted the emulator but not the profile. I recently tried to download the emulator again and this is when problems started. I deleted the profile but nothing seems to work. I have an IPad 2, is there anyway to fix this without going to Apple? I'm not good with all this tech stuff

Your post indicates you have used Cydia, which is a software application for iOS that enables a user to find and install software packages on jailbroken iOS Apple devices. Since your iPad has been jailbroken, we can't help you in this forum. Best bet is to Google for answers.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
http://support.apple.com/kb/HT3743
If you jailbreak your iPad:
1. Your Apple warranty, if any is remaining, is canceled.
2. We can't help you in these forums.
3. Apple Support and the Genius Bar won't help you.
4. You can get a virus and malware.
5. You may "brick your iPad and have an $$$ paperweight.
What is Jailbreaking iOS? Should I do it?
http://tinyurl.com/mn5umca
 Cheers, Tom

Trouble with e1000g0 network driver in Virtualbox

Hi,
Has anybody resolved this issue? Cant get networking working on the newest solaris 10 platform because I think the driver or device is faulty or nonexistant. Tried full installation and it doesnt work. Dladm says this is the device. Ive got a ipv4 address up and running but no ping or dns resolving. Anyway, cheers.

There some debate about the duplex and speed settings cause its a gigabit ethernet virtual network card. There's a ndd command that supposed to help you set it to 100 and/or half-duplex. Had no success with it, looking now for a old cheap pc for testing purposes. But the device is in /dev and the ndd page said its included e1000g0 but its gives me an error. Maybe you'll have better luck with it. I'll look into more tomorrow if I have time at work.
Cheers,
Siggi from Iceland.

HP Deskjet 3520 e-All in one printer trouble with scanning network, connection and very slow print

Dear all
I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem.
I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same).
Obesely something did go wrong, but i can’t find the problem.
Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all.
I hope that someone recognize this problem and can help me to solve it.
Regards,
Esra

Hello chesterpascual,
Welcome to the HP Support Forums!
Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
Click here to locate the contact information.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

WLAN Trouble with the new iMac?

hi
i order my new imac today and now i find some information that the wlan connection is very slow and weak. is there anyone who can confirm this?

I'll need more information, but i probably can.

Trouble with detect network "Domain network" in the domain member server

HI a have quetstaion about detecking "domain network " in the windows 2012 r2 server . after instaling and adding this member server to domain i look that i cannot connect to this server . After I connect to console a detect site also public site
. After I disable and enable this netwotk site the network is correct domain. How is detect which network is it ? this contacted domain controller ? etc. ???
Thank you for answer
Falcon

Hi
Not fully understood the problem. But if you have a Windows domain and you can't add the new server to the domain or can't connect
to the server after or before joining to the domain. Then it could be no of reason first one to check is firewall.
Turn the firewall on host and source and then try again. Also are you able to ping the new server?
How are you trying to connect to the server via RDP?
If yes then you need to enable the RDP and give yourself permission to remote dial in.
Thanks
Umar

OS X 10.6.4 troubles with SMB networking

Hello, I found, in my iMac, when for some reason the mounted SMB shares are no available for some time (i.e. the server providing them, rebooting), then available again (server completed reboot and shares up), I cannot navigate the mounted shares, and if I try to reboot iMac, this hangs, so I have to forcefully power down iMac. Shares are provided by a windows server.
Any hints about this?
TIA

Related to this thread http://discussions.apple.com/thread.jspa?messageID=11603932
Not that we have any answers ;(

I am having trouble with my Mac Mini's ethernet connection. Defining a new network interface shows no ethernet adaptor. Reloading SL from DVD repaired. But SL update lost ethernet again. Will Lion Fix?

I am having trouble with my mac mini ethernet. It had been working for weeks after an update to SL 10.6.8.
Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
But yesterday, after a power up. my ethernet was not working again. I tried this old trick to repair it, but the interface choices
listed for '+' a new service did not include Ethernet any more. And the Utilities->System Profiler->Ethernet Cards shows
no ethernet available.
As a last ditch effort i reloaded my original SL from DVD. (I think it was version 10.6.4 but i could be mistaken on the version).
The ethernet worked! But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
Now the Ethernet is not working again. I see the same symptoms as before with the Ethernet seeming not installed.
Is this a problem seen by others?
Would going to Lion fix the problem?
Could AirPort actually be the culprit and not SL?
If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?

Have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.

I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.

I finally figured it out. Needed to update her Airport firmware and allow guest access, and also changed Sharing preferences to Allow Access for All Users.

Trouble With a Wi-Fi Network

Here's my situation,
Y've got a password to access to a Wi-fi Network at my school, Then, When i put the password and Tap Rejoin, It start loading, But it never stoping... It give me only a Ip Address and the Subnet. So i don't have the Router and DNS Adress.
After few Seconds or Minutes, It disconnect and reconnect with the same things, but a another Ip adress. One of my friend has the full access to this network and have no trouble with it. But for me, it doesn't work.He ( My Friend ) in his settings he has the Router and DNS Adress when he connect his Ipod to the Network... But not me, So i don't understand what's happening, How can i get the correct Information to be connected like him?

I think i know the problem But i don't really know how to resolve it...
It seems like my Ipod Touch compared to my friend One's is giving
169.**.**.** IP instead of 192.**.*.** Etc... And 255.255.0.0 Subnet...
I have a Ipod Touch 4g on 5.0.1 and my friend has Ipod Touch 2g 4.2.1
What could i do so the Network would work on my Ipod ??

Networking troubles with ABIT BP6 board and Solaris 8

Hi, Im trying to install the Solaris 8 software on my ABIT BP6 board with a Compaq NetFlex3 10TX NIC. This is a SMP board (dual celeron) but is not on the HCL (the NIC is).
The installation gives no problems at all (except for a memory conflict between memory devices), and SunOS works pretty well except for networking... using ifconfig -a shows me the networking interface and the loopback interface but I can't ping outside of the Solaris machine (or ping to the Solaris machine from an other machine).
I know that the board is not on the HCL but I had no networking troubles with Solaris 8 early access.
After instalation of the software and the reboot, I get the status as below:
>
configuring IPv4 interfaces: cnft0.
Hostname: MILLIWAYS
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c0d0s7: is clean.
All devices are configured...
Configuring network interface addresses: cnft0.
RPC: Timed out
Starting IPv4 routing deamon.
starting rpc services: rpcbind done.
Setting netmask of cnft0 to 255.255.255.0
<
As you can see I get a time out while configuring the NIC. I tried a lot of different things (and some bad ones like using the device driver disk of the EA version with the cd's of the final version but no luck there...)
Anyone with the same problems or any help?
Thanx, Marcel

Hi maeck,
I'm sorry that my message is off the topic. Could you help me with a problem that I have with Abit BP6 + Solaris 8 combo?
I'm encountering error message on console screen during booting/reboot/shutting down like "APIC error interrupt on CPU 0. Status=2" where CPU can be 0 or 1, status can be 0, 2, 4 or 6.
If I let my dual Celeron400 run at 400MHz, the frequency of errors is few and far between. Though it still happens. If I overclock them to 558MHz like I udually do, it will show at least 4 times during a booting process. I've tried MPS 1.1 and 1.4 settings. I've also tried turning off all cache, delayed transaction, passive release settings.
In addition, the overclocked system tends to lock up while it runs flawless in Windows 2000 Professional and Redhat 6.1. Do you have any similar experience?
My system config:
Abit BP6 motherboard
400 MHz CPU X 2
GlobalWin FEP32 X 2
128M SDRAM
Creative Labs 3DBlaster TNT2
13GB Maxtor DiamondPlus 6800
Acer 10x DVD drive

Trouble with MacBook Pro finding AirPort networks

I recently bought a new (refurbished) MacBook Pro (15", 1.83GHz), to replace my old iBook, which was one of the early white models, circa 2001.
Everything about my new computer is wonderful, of course, except that every time I boot up, wake from sleep, or turn on the AirPort, it takes up to a full minute for the AirPort to find any open networks. This happens at school (where there are AirPort base stations all over the place), at home (where we have a Belkin router, and several neighbors have others), and at my parents' house (where they have a linksys router). It doesn't seem to matter whether the networks use encryption or not, nor how close or far I am from the nearest router. If I know the name of a nearby open network and type it in, I can get it, usually. On my old iBook, I had a little trouble with some of the networks at school sometimes, but never with this kind of delay across the board, and certainly never at home nor at my parents'.
Also, at home, when the the AirPort finally does find the available networks, it NEVER chooses my router first, even though it's the only one in the neighborhood that I listed under "Preferred Networks."
I've read some similar posts, dealing with problems with accessing encrypted networks, but nothing seemed to address my particular issue. It might be a defect with the AirPort or firmware, but I wanted to check, first.
(Oh, and I'm not a complete newbie, but tech-speak often goes over my head. Please keep it simple.)
Thanks!

This is how I fixed the problem on my MBP.
Go to Macintosh HD > Library > Preferences
Delete the folder SystemConfiguration
Go to System Prefrences > Network > Show+Network Port Configuration. Check Airport and Built-in Ethernet and make sure Airport is on the top of the list.
Reconfigure your wep passwords and it should work. Worked for me. Also, you will have to redo your power settings.
Regards,
David Rodriguez

I'm having trouble with my Ipad. It cant find any networks around it. What do i do?, I'm having trouble with my Ipad. It cant find any networks around it. What do i do?

I'm having trouble with my Ipad. It cant find any networks around it. What do i do?, I'm having trouble with my Ipad. It cant find any networks around it. What do i do?

Start here: iPad: Troubleshooting Wi-Fi networks and connections.

WLAN trouble with PEAP network!

Similar Messages

Maybe you are looking for