WLAN WPA-PSK TKIP and APPLE TV2
Hi all,
I have a ARCOR Wlan Router 200 (Zyxcel Prestige 660HW-T7) and a Apple TV2.
I have WLAN running on WPA-PSK TKIP.
I can conncet Sony Laptop and IPHONE 4 and Wii to WLAN but not APPLE TV2.
It finds the WLAN I enter password correct but than it tells me that there is a problem and cannot connect.
ESSID is not hidden.
DHCP is on.
Any solutions?
...with wire it works...
Similar Messages
-
Wga54g connecting to sony blu ray using WPA-PSK (TKIP) or WPA2-PSK (AES)
My Wga54g is to be the interenet source to my sony blu ray player. I have a wireless broadband router modem setup that uses WPA-PSK (TKIP) and WPA2-PSK (AES). How do I configure everything to work? Since the WGA54G only does WEP is there a way to configure it or the Sony Blu ray to get a internet signal to it? The sony seems to have a automatic IP or manual IP configuration setting option. I suppose I can step down to WEP on the router settings but I'd rather not. I tried that and couldn't get it to work regardless. Please help!
To connect the Wireless-G Game adapter to a wireless network, please determine your SSID, Wireless Security and/or Network Key. Second you need to lower down the security mode to WEP, since WGA54G do not have any other security mode. Here is the link for connecting the Wireless Network using a WGA54G: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4558&userrole=Linksy...
-
I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?
Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.
-
Does iPhone support WPA-PSK authentication?
If so, does it support TKIP encryption?
I'm having a heck of a time trying to set up my work network on the iPhone, though my MacBook Pro handles it just fine.
Thanks in advance.i have not seen support for WPA-PSK TKIP if your
router and other devices support WEP 128bit
encription use that... anything other then 128bit
will not work.. took 2 hours of fussing to figure it
out
MacBook Pro 15inch
Mac OS X (10.4.10)
That is incorrect.
I am running WPA and WPA2 (both on Apple wireless base stations), and was able to connect to both. The WPA one uses TKIP.
Make sure you do not have the new ExtremeN if set to "N-only". It will not connect in that case, whether you are using 2.4 GHz or 5 GHz. In fact, it will probably never even see the AP in that case. -
Smart Phone O2, Dopod, iPaq can't authen with WPA-PSK(TKIP)
I used Cisco AP 1100 and WPA-PSK (TKIP) My notebook can authenticated but smart phone can't it. I see log at AP "authentication failed" What happen?
Hello,
I have similar problem. We have wireless handhelds same firmware version however different types of wireless cards. The old type has Cisco AIronet 350 and the new ones have Wistron 802.11G. The new ones can authenticate successfully using WPA + TKIP. The old ones don't authenticate and I get authentication failure on the access point log.
I appreciate if anybody can give me some ideas.
Remark: I connected my laptop and directly connects as well. It is only the old type of handhelds having the Cisco Aironet 350.
All handhelds have windows CE 5.0 and latest drivers and firmware installed.
Thanks, -
Greetings!
I can't get Home Sharing to work between iTunes on my iMac and Apple TV2.
Can somebody help or point me to a support article?
TIATroubleshooting Home Sharing with Apple TV (2nd generation)
-
i have done all 7 steps recommended by the troubleshooting articles and only when i restart my router does my library show on apple tv2 but only for about 5 minutes, this was never a problem before the updates of itunes and apple tv2, i have spent insane amounts of money on the apple store buying movies and tv shows that i cannot watch anymore, and no there is no firewall on my laptop nor my router, so no port configuration is needed
i have read many articles for this problem but there is no solution, some say restart the router, others say uncheck the option to sync iphone over wi-fi, others suggest not hitting the "done" button after setting up homeshare on itunes, NONE of them work. My itunes library disappears from ym apple tv 2 after 5 minutes or soDid not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.
-
I have a macbook pro and apple tv2. My problem is that my hard drive is full. What is my best option to empty movies off of my macbook but still access them through atv2?
ok. I do have a time capsule but if I move itunes on to it how do I sync my ipods and iphone? Or can I have my Itunes account on both and just move my movies to the time capsule?
-
Situation:
- D-Link DIR-635 802.11n-router configured: only WPA2 (personal) with TKIP
- D-Link DWA-645 802.11n-pcmcia with atheros chipset and working ndiswrapper driver (ath5k is not yet supporting this chipset)
I cannot connect to the router and I'm not sure it's the linux-config or the router-config that is to blame (which makes troubleshooting a real pain), so here goes:
# wpa_supplicant -dd -c/etc/wpa_supplicant.conf -iwlan0 -Dwext
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='0' (DEPRECATED)
eapol_version=1
ap_scan=1
fast_reauth=1
Line: 7 - start of a new network block
ssid - hexdump_ascii(len=9):
53 4c 2d 61 63 63 65 73 73 SL-access
key_mgmt: 0x2
pairwise: 0x8
group: 0x8
proto: 0x2
priority=9 (0x9)
PSK - hexdump(len=32): [REMOVED]
Priority group 9
id=0 ssid='SL-access'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=22 WE(source)=18 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:17:9a:45:9b:1f
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
ctrl_interface_group=0
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 256 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 9
Try to find WPA-enabled AP
0: 00:1c:f0:ee:f8:68 ssid='SL-access' wpa_ie_len=0 rsn_ie_len=22 caps=0x11
selected based on RSN IE
selected WPA AP 00:1c:f0:ee:f8:68 ssid='SL-access'
Try to find non-WPA AP
Trying to associate with 00:1c:f0:ee:f8:68 (SSID='SL-access' freq=2412 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 00 00
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=17
Authentication with 00:1c:f0:ee:f8:68 timed out.
Added BSSID 00:1c:f0:ee:f8:68 into blacklist
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 5 seconds
^CCTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
Removed BSSID 00:1c:f0:ee:f8:68 from blacklist (clear)
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6
net-profile wl-Synergy:
CONNECTION="wireless"
DESCRIPTION="SynergyLaw wireless access"
INTERFACE=wlan0
ESSID="SL-access"
SCAN="yes"
SECURITY="wpa-config"
IP="dhcp"
TIMEOUT=40
WPA_CONF=/etc/wpa_supplicant.conf
/etc/wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
network={
ssid="SL-access"
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
proto=WPA2
priority=9
#psk="abc"
psk=<censored>
# iwlist wlan0 scan:
wlan0 Scan completed :
Cell 01 - Address: 00:1C:F0:EE:F8:68
ESSID:"SL-access"
Protocol:IEEE 802.11g
Mode:Managed
Frequency:2.412 GHz (Channel 1)
Quality:45/100 Signal level:-67 dBm Noise level:-96 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:bcn_int=100
Extra:atim=0
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
I find a lot of people asking similar questions, but none of the answers have helped me so far. I hope to find someone here with a similar setup and the answer to all my problems
Zl.B wrote:
I am running WPA2 indeed, but no N - plain G for the moment.
That wpa_supplicant.conf looks dandy .
Here's mine for reference:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
#fast_reauth=0
#ap_scan=0
#DIR=/var/run/wpa_supplicant GROUP=wheel
# My home network
network={
ssid=*snip*
key_mgmt=WPA-PSK
proto=WPA2
pairwise=CCMP
group=CCMP
#psk=*snip*
psk=*snip*
# Arne's network
network={
ssid=*snip*
key_mgmt=WPA-PSK
proto=WPA
pairwise=TKIP
group=TKIP
#psk=*snip*
psk=*snip*
As you can see the first one is WPA2, the second one WPA. Of course you can mix but that will imho only increase possible incompatibilities.
My netcfg setup:
CONNECTION="wireless"
INTERFACE="intel"
HOSTNAME="hermes"
# AP authentication
SCAN="yes"
SECURITY="wpa-config"
WPA_CONF="/etc/wpa_supplicant.conf"
WPA_OPTS="-Dwext -B"
ESSID=*snip*
# IP address
IP="dhcp"
DHCP_TIMEOUT=10
N does not add any additional security (except that it makes WPA2 mandatory as far as I understood, I might be wrong about this). My router runs OpenWRT and I only intend to switch to N when I find a router that is stable on OpenWRT, and provides N performance and range (now you often have to resort to G MIMO drivers and stuff with OpenWRT on N models).
hey!, thanks for your config there, now I have wifi using wpa2 connecting properly on a dell xps m1330.
But I also found that if I didn't use netcfg to stop the profile manually, I couldn't reboot the system and after typing 'reboot' I think the wpa_supplicant is just killed or crashes and the system is stuck on '> Rebooting'. I had to use 'netcfg2 -d abc' to stop the profile then reboot.
Last edited by ST.x (2008-06-27 11:43:17) -
E52: cna't connect to Wi-Fi (WPA-PSK/TKIP)
I can't connect to my Wi-Fi router.
It is ASUS wl500gP with broadcom Wi-Fi module.
It was set to support any b/g device. Auto b/g + 54G Protection is set.
Sec.mode is WPA-Personal. WPA is TKIP. WEP is 128 bits.
Passphrase is set (afaik most OSes doesn't support passphrases for WEP)
WEP keys 1-4 are set.
WEP Pre-Shared key is set.
Radio chanel is #9 (all my PDA and notebooks work with it)
SSID is set and open
I can see my router in Wi-Fi list of networks.
I select my network,
enter my Pre-Shared key.
The mobile starts to login... and fails like there's no WLAN network.
Message Edited by hale on 22-Aug-2009 09:51 PM
Nokia 640->>Siemens S35->>Siemens C55->>
Siemens CX65->>Siemens S75 -x- Nokia E52:
Nothing is smart in Smartphones!
Solved!
Go to Solution.austex09: "WLAN security mode has 4 options...."
That is only your router/AP. More advanced h/w and s/w has more options.
"How where do one set AES or TKIP? "
Based on wireless network properties (say automatic)
E52 is sertified as WPA2, so it MUST support all of the options by default. And there's no proplem to determine a subtype of the WPA/WPA2 network.
"WPA2 only is off."
Yes.
Old devices like Winmobile PDA's doesn't support WPA2 and AES. So the network is configured as WPA.
And there's no meaning in enabling this option untill you want to cut any connection with network.
"Is a 63 bit alphanumeric key the problem?"
Now I don't know. I was whrong in first guess about the key. Sorry. The problem s in TKIP itself.
" IPv4 settings?"
That is higher layer. Not physical. First you need to connect to AP.
IPv4 fo 255.255.255.255 style addresses and a bunch of gateway settings. IPv6(very new and rare technology) IPs are longer and most options are automatic.
"Had tried enabling the MAC filter f"
what for? Of cource if filters MACS, including your mobile in that case.
... MACs must unique until you want to hack into someones network
Linksys WRT54G is based on Broadcom (AFAIK). The same broadcom as mine in Asus WL500GP
"With the paraphase, I guess I am supposed to enter the "converted value" of the paraphase?"
No! I was wrong, as I said. It appeared to be just a simple ASCII string.
Message Edited by hale on 24-Aug-2009 09:14 PM
Nokia 640->>Siemens S35->>Siemens C55->>
Siemens CX65->>Siemens S75 -x- Nokia E52:
Nothing is smart in Smartphones! -
My brother, who lives in a nursing home with Wi-Fi, wants to "show" the photos on his ipad (1st generation) on a large HDMI compatable television screen (to teach a class).an He does NOT have a computer. Can he use Apple TV2 to "project" the pictures one at a time (not a slideshow)?
Thanks, PatriciaI have the original iPad,too! Until iPad3 comes out and I can see what significant advances/advantages it will have over my iPad1, I have stayed with my iPad1 and it gets a lot of use everyday. I would love to see video mirroring implemented, as well. That said, the reason it, probably, hasn't happened is that the iPad1 may not have enough bulit-in RAM to support both video on the iPad and outputting of video to another device simultaneously.
Also, these discussion boards are user to user forums. There are no, regular, Apple employees monitoring anything going on anywhere in these boards.
If you want to request a feature, fix a feature or suggest a new feature for iPad, you can go here to do so.
http://www.apple.com/feedback/ipad.html -
Time capsule and Apple TV2 ?
Is it possible to use my Time capsule as itunes-server. So that i can stream movies directly to my Apple TV2 ?
Perhaps I'm not understanding your question correctly.
You have the ability to move your current iTunes library to the Time Capsule and then point iTunes on your computer to the new library location.
But, if you did this...you would have no backups of your valuable movies, music and media.
Can you please clarify regarding your proposed setup? -
Everytime i want to playback music from apple tv2 via itunes match i have to login with id and password!
Why isi there no auto login?It should remember the credentials.
Have you unpowered and restarted the device?
May also be worth resetting the AppleTV settings and configuring from scratch.
AC -
Are apple airport wlan card M7600LL/A and apple airport wlan card M7600LL/E the same
Good evening!
Is there any technical difference between the Apple Airport WLAN card M7600LL/A and the Apple Airport WLAN card M7600LL/E?
Thanks forward and best regards.
DJCHUCKApparently they are physically similar. However, the E model is the last of the genre and has a few more features as you will see here.
-
HT1600 what's the difference between apple tv and apple tv2?
What is the difference between apple tv and apple tv 2?
How do I get videos on my Ipad to play on my Apple TV? I tried Airplay and only vocal comes over.Thanks! Yea, I'm leaning that way and from everything I've read the 'biggest' benefit would be Airplay - and the 5:1 surround in my gameroom (or the 7:1 surround in my screening room). I don't stream movies - I'm more of a blu ray collector and watch movies that way - so in all probability I wouldn't use Apple TV in the screening room - but there are several other locations where it could be a nice addition.
I do watch some TV shows on my iPAD, and lots of music videos - so perhaps, with Airplay they'll look/sound even better if I push that content to one of the other big screens.
For the most part - whenever I wanted to watch something from my iPad on the big screen, I just connected it to my A/V receiver - pressed play, and enjoyed. Apple TV would now become that device that's connected to my A/V receiver, and the iPad more of a remote - uncabled.
Again - thanks for the reply; it's proven very helpful.
Cheers.
Maybe you are looking for
-
i went to access my iphoto on my mac and there are no photo's or anything, it will not open, so i tried to upload from my camera and it wont do that either, does anyone have any idea's where or what could of happened to my pictures..
-
How to use a KVM switch with my IMAC
Have a new IMAC and wanting to use my KVM switch - is there a way to use it? Thanks,
-
My ipad is displaying a blue screen. I have tried to reboot but nothing is happening, it keeps displaying the blue screen. How can this be fixed so I can use my ipad again
-
Using HipServ app to enable 3GS access of Mediashare pro acct
Not sure on the solution. Mediashare support acknowledged that this is the correct app to use but nothing else. I didn't have the iPhone when I setup the acct in Sept. My subscription doesn't expire until 9/2/2012 so I know that's not an issue pre
-
Hi, we are facing a unexpected restart of windows 2012 R2 (datadacentre) hyper-v host servers ( Cisco blade servers- we have 8 host blade servers( 2 pro with 6 core and 64 gb ram ), OS in SAN booted from a EMC VNX storage. each host servers has onl