WLC 2106 does not send DHCP request
Hi,
I've several WLC2106 running 4.1(185) and all is working fine.
Now we started to migrate some of them to 4.2(207) but client didn't received anymore DHCP reply.
DHCP server is a Microsoft server with the address configuren under the dynamic interfaces parameter.
With the same config and 4402 all is working fine.
With the same config and 4.1.x with WLC2016 all is working fine.
It seems something changed from 4.2.
Any idea ? Here the log of DEBUG DHCP PACKET
00:22:fb:89:d1:dc DHCP received op BOOTREQUEST (1) (len 312, port 1, encap 0xec03)
00:22:fb:89:d1:dc DHCP processing DHCP DISCOVER (1)
00:22:fb:89:d1:dc DHCP op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
00:22:fb:89:d1:dc DHCP xid: 0x5cbacd54 (1555746132), secs: 3, flags: 0
00:22:fb:89:d1:dc DHCP chaddr: 00:22:fb:89:d1:dc
00:22:fb:89:d1:dc DHCP ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
00:22:fb:89:d1:dc DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
00:22:fb:89:d1:dc DHCP requested ip: 169.254.122.145
00:22:fb:89:d1:dc DHCP successfully bridged packet to DS
00:10:18:3d:9c:2b DHCP received op BOOTREQUEST (1) (len 268, port 1, encap 0xec00)
00:10:18:3d:9c:2b DHCP dropping packet (no mscb) found - (giaddr 0.0.0.0, pktInfo->
Many thanks
Luigi
In 4.1, disabling DHCP proxy did just that, it disabled the "proxy". If you ever look at your dhcp lease of a wireless client, it comes from a dhcp server of 1.1.1.1 (virtual IP of the controller). With proxy disabled, the address will no longer be masked.
In 4.2 and beyond, disabling dhcp proxy actually disables the DHCP Relay that is the process of the controller sending the dhcp requests to a specified server.
So if in 4.1, you had "dhcp proxy" disabled, in 4.2 and beyond, you are actually disabling the relay as well.
If this is indeed the case, enable dhcp proxy, or add an IP Helper adress to your router for this vlan, just like you would normally do for Wired clients.
Similar Messages
-
Outlook does not send meeting requests at all.
Hi all
My problem is both annoyingly simple and frustratingly annoying, but so far i haven't been able to solve it, nor has our IT department.
In short, my Outlook doesn't send meeting requests to invite attendees. (My colleagues, same exchange server) I am the only one having this problem. When i send out a meeting request, it appears double in my calendar (asking me to accept) but nothing shows
up in my sent items, nor in their calendar. If i delete the event, this is sent out; new ones and updates are not.
To my knowledge, I use the standard IPM.Appointment form, but have used another standard form in the past (which was removed.)
A new profile doesn't help, nor does uninstalling / reinstalling Outlook 2007. I installed Outlook 2010 - same phenomenon.
It has worked all the time, but stopped working about 10 months ago, no apparent cause.
I should add that I can send out meeting requests through Exchange from my iPad and iPhone, just not from my computer. (and no, they are not related - the time i got iPad and iPhone everything worked)
OS is Windows 7 Professional 64 bits, MS Office 2010, various applications installed but none related to calendar useage / sync / ...
I am local admin, this is my work PC so no 'dubious' SW installed, nor authorised.
According to the server guys, there is nothing exceptional like the forms attached to my account - they claim it's something local, but also have no clue what it might be. Even Mr. Google or Ms. Bing do not provide an answer, so i'm hoping someone here might
outsmart everyone else and come up with a solution.
(ps - i'm quite sure it isn't "stupid user error" either, I'm an IT specialist/consultant/developer - but this one baffles me and everyone looking for it...)
Added info - on my PC, when logging in with a different account but connecting to my own exchange account, it works.
Replacing forms related info from the user/appdata folder of the functional user towards the non-functional user account didn't work. (even though the information was different)
No difference in the registry as i can see.
Tried to add ForceFormReload to the registry - no use.
I activated logging, also nothing in there.
I also receive no error whatsoever, it really is like Outlook simply isn't configured to send out meeting requests anymore...
Also, no errors in the event viewer in case you were wondering.
When working offline, it is clear that the meeting requests simply do not enter the 'outbox'. (cancellations do)
Assuming it might be a corrupt DLL somewhere, i scheduled a Chkdsk C: /F/R this evening. A long shot, yes, but grasping at straws here...
Thanks in advance for your help,
Kind regards,
Dennissolved - completely uninstalled, reboot
removed all keys in HKEY_CURRENT_USER\Software\Microsoft\Office\14.0 (the entire folder)
removed all outlook related registry keys in HKEY_CURRENT_USER\Software\Microsoft\Office\11.0 and 12.0, also in 8.0 and 9.0
removed HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook completely
rebooted
installed Office Pro2010 again, and now it works.
so in short - there was a messed-up registry key somewhere in there, that was missed by installing it, or even completely reinstalling it.
FYI - all my settings remained the same, no info or config loss except the colour profile i used...
Grtz,
Dennis -
Apple does not send a request to change the password on the email
I forgot the password for this account. but I'm on the side of the iforgot look but you do not send e-mail to confirm the password change. Now I do?
Please help!!!!!You've checked the spam folder as well as the inbox on your primary email account, and if you have a rescue email address on your iTunes account then you've also checked that email account ?
If you still can't find it (and you've tried re-requesting the reset email and you can't reset your password by answering your security questions) then you will have to contact Support in your country to get it reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html -
ISG does not send Access-Request to download service definition
Hi guys,
I got these configs on my ISG and when I see the packets between AAA and ISG router, there's no access-request for downloading the service definition!
policy-map type control PPPoE_MAIN_POLICY
class type control always event session-start
10 authenticate aaa list PPPoE_AUTHE
15 authorize aaa list PPPoE_AUTHO password cisco identifier source-ip-address
20 service local
class type control always event service-start
5 collect identifier source-ip-address
10 service permit
20 service-policy type service identifier service-name
30 log-session-state
class type control always event account-logon
service-policy type control PPPoE_MAIN_POLICY
And here's the picture of Access-Accept with bunch of specified not-cached services
Any idea I appreciate it in advance.Hi,
Could you share your full config? It would be good to check your AAA config since that will influence how service profiles are downloaded.
Also, could you briefly explain the goal of your config? Do you simply want to apply services "SRV_INTERNET_PRIMARY" and "SR_INTERNET_128K_5G" via autosevice?
Regards -
Error: Path to object does not exist at Request
Hi experts,
i have a scenario asynchronous/syncrhonous: file to rfc and get back response rfc to other file. I have 3 communication channel: 1 sender file, 1 receiver file, 1 receiver RFC. The communication channel sender file show the follow error:
Attempt to process file failed with com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at Request, the whole lookup name is localejbs/AF_Modules/Request/ResponseBean.
I do not understand how modules(AF_Modules/Request/ResponseBean) in adapter works, the documents that I have found I am not much has clarified, could someone please explain and tell me something's error?
very thanks,
regardsHi,
Check the receiver agreement, you might have configured the file receiver communication channel name instead of the RFC receiver communication channel name.
Also check the module parameters in the sender file CC
Processing sequence:
Module name Module type Module key
AF_Modules/RequestResponseBean Local Enterprise Bean 1
CallSapAdapter Local Enterprise Bean 2
AF_Modules/ResponseOnewayBean Local Enterprise Bean 3
Module configuration:
Modulekey parameter name parametervalue
1 passThrough true
3 receiverChannel <File receiver CC>
3 receiverService <Receiver service name>
Regards,
Nithiyanandam -
When I accept meetings in outlook 2010 on my Iphone it does not send my acceptance to the requestee. How do i fix this
Outlook 2010 is an email client that runs on a PC. It does not run on an iPhone at all.
Is this a corporate email account? What did your IT department say when you went to them about the problem?
The ability to correctly process meeting requests when using an Exchange server depends on the version of Exchange your organization is running. It has nothing to do with what mail client you use on your PC. -
Forgot my security question and apple does not send email
forgot my security answer and apple does not send email for the instrctions to reset
Click here and request assistance.
(76924) -
Find My Friends does not send notifications - iOS8
The Find My Friends iOS8 app is not sending the requested notifications when "Notify Me" is being used to alert arrival at/departure from a location. All following/sharing location settings are confirmed amongst users (Find My Phone works, as does location in Find My Friends).
"Notify Me" will save the request, and appear highlighted in the main screen, and will stay that way as long as the alert conditions have not been met. However "Notify Me" will clear to default, inactive state after the requested arrival/departure has happened, without having sent the nofitication.
Any ideas?
ThanksHello weeno,
Thank you for using Apple Support Communities.
You can use the following article:
iCloud:Troubleshooting Find My Friends
Take a look at "Issues with locations requests".
Regards,
Jeff D. -
Hello Everyone,
My problem is:
The Create Upgrade Evaluation Site Collections job does not send a Notification Email when the Eval Site is created. I only get a notification E-Mail that mention that a Upgrade Evaluation Site Colletion is requested and then after 27 Days that the Evla
Site will be deleted in three Days.
My Enviroment:
SharePoint Foundation 2013 Sp1 on Windows Server 2012
Exchange 2010 SP3
I hope someone can help.
best regards
domschiHi domschi,
As I understand, you didn’t receive email generated from Create Upgrade Evaluation Site Collections timer job. While you might receive email generated from Delete Upgrade Evaluation Site Collections.
When you request an evaluation site collection, the request is added to a Timer job
which runs once a day. You will receive an e-mail message when the upgrade evaluation site is available. This might take up to 24 hours. The message includes a link to the evaluation site. Upgrade evaluation site collections are set to automatically
expire (after 30 days by default).
Please go to CA > Monitoring > Review Job Definitions, locate issue timer job and click Run Now. Then go to Job History and check if the issue job failed to run.
Also, please check if the email are received by Exchange Hub server.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
User created apple id account, verified but know she is unable to log on, it says incorrect password, she tried to reset via forgot password option but it does not send reset password page to here e- mail address, how can i get this sorted? or how can i get her whole apple account deleted and created new one using same e - mail address?
The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.
-
I have another apple ID but I forgot the password and apple does not send the link to reset it to my email. What do I do to have it back? It is really important.
If you know the answers to your security question for the ID you can use that method to reset the password rather than email (by going to https://iforgot.apple.com/password/verify/appleid).
If you don't, you'll have to contact iTunes Store support for assistance: http://www.apple.com/emea/support/itunes/contact.html. They frequently deal with Apple ID issues. -
My problem is simply that Mail does not send email.
I have just migrated from iMac G5 to iMac Intel by using Migration Assistant. Everything else works just fine and I can receive email. However, if I try to reply, forward or send a new email message, Mail just does not do anything - no error message, nothing.
The fixes I have tried so far are removing the Mail plist file, repairing disk permissions and mailboxes. Of course, I have checked the account settings, especially outgoing server settings. I also reinstalled Mail application with Pacifist. None of this has solved the problem. I have tried sending email with Thunderbird and it works with no problems.
Does anybody have any suggestions how to fix this issue?
The OS is 10.4.8, Mail Version 2.0.6 (749.2/752.3), all the suggested software updates done.
iMac Core Duo 20" 2GHz Mac OS X (10.4.8)Reinstalling Mail is rarely necessary or appropriate to solve a problem. It certainly cannot fix anything that could be wrong within your home folder or at the server or with the network, and may even introduce new issues if not done properly. Moreover, in Mac OS X 10.4 you don’t need Pacifist to reinstall Mail, you could also do it as described in the following article:
Custom installs in Mac OS X 10.4
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, if the version of the system software on your install disks is earlier than what you’re using now (and only in that case), then you must also reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, to bring Mail back in sync with the rest of the system:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
The above won’t solve the problem. It’s just to ensure that you’ve properly reinstalled Mail, which you shouldn’t have done, and which apparently you didn’t do properly -- the version of Mail on your system should be 2.1.1, not 2.0.6.
The original problem could be caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer. -
TT14000: TimesTen daemon internal error: Could not send 'manage' request
Hi
I have got error like TimesTen daemon internal error: Could not send 'manage' request .Can any one help, why this error is came and what is solution for this.
I have restarted the Timesten Daemon now its working fine.But why i got that error?
Below is the tterror log :
12:50:27.53 Err : : 31518: TT14000: TimesTen daemon internal error: Could not send 'manage' request to subdaemon rc 400 err1 703 err2 836
12:50:28.52 Warn: : 31518: 31522 ------------------: subdaemon process exited
14:04:21.95 Warn: : 31518: 31619/0xcce7500: Recovery started
14:04:23.01 Warn: : 31619: subd: Warning identified in [sub.c: line 2152]
14:04:23.01 Warn: : 31619: subd: (Warning 20100): TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
14:04:23.01 Warn: : 31619: -- file "db.c", lineno 12011, procedure "sbDbConnect"
14:04:23.01 Warn: : 31619: subd: connect trouble, rc 2, reason 20100
14:04:23.01 Warn: : 31619: Warn 20100: TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
20:23:57.74 Warn: : 31518: 9216 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=1
21:15:17.79 Warn: : 31518: 22608 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=1
09:22:11.63 Warn: : 31518: 32431 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=21
09:28:03.52 Warn: : 31518: 32417 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=1
20:26:56.30 Warn: : 31518: 1165 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=1
20:40:31.73 Warn: : 31518: 21549 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=3
23:17:52.64 Warn: : 31518: 29899 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=20 '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=215
09:42:29.96 Warn: : 31518: 22044 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=10
13:12:19.91 Warn: : 31518: 16923 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=10
19:42:46.21 Warn: : 31518: 10794 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1174700038 count=10
00:00:06.83 Warn: : 6786: Invalidating the data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because it had 34 users
00:00:06.83 Warn: : 6786: WARNING: data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 was in use at daemon termination.
00:00:06.83 Warn: : 6786: WARNING: data store no longer considered in use
00:00:06.84 Warn: : 6786: WARNING: PL/SQL shared segment existed at time of daemon termination
00:00:06.84 Err : : 6786: TT14000: TimesTen daemon internal error: Could not destroy PL/SQL shared memory, error
00:00:06.84 Warn: : 6786: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
00:00:15.32 Warn: : 6786: 6792/0x1edfc500: Recovery started
00:00:16.39 Warn: : 6792: subd: Warning identified in [sub.c: line 2152]
00:00:16.39 Warn: : 6792: subd: (Warning 20100): TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
00:00:16.39 Warn: : 6792: -- file "db.c", lineno 12011, procedure "sbDbConnect"
00:00:16.39 Warn: : 6792: subd: connect trouble, rc 2, reason 20100
00:00:16.39 Warn: : 6792: Warn 20100: TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
17:51:04.03 Warn: : 6786: 17730 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1225031686 count=10
10:03:44.61 Warn: REP: 7064: TT_TT70_32:receiver.c(7921): TT16191: Replacing old table definition (OASTT.USER_AUTH) with the one received from peer (TT_TT70_32_MASTER)
10:03:52.28 Warn: REP: 7064: TT_TT70_32:receiver.c(7921): TT16191: Replacing old table definition (OASTT.USER_AUTH) with the one received from peer (TT_TT70_32_MASTER)
10:04:02.73 Warn: REP: 7064: TT_TT70_32:receiver.c(7921): TT16191: Replacing old table definition (OASTT.USER_AUTH) with the one received from peer (TT_TT70_32_MASTER)
17:58:15.58 Warn: : 6786: 15156 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1225031686 count=7
18:02:14.24 Warn: REP: 7064: TT_TT70_32:receiver.c(2682): TT16060: Failed to read data from the network. select() timed out
18:02:25.07 Warn: REP: 7064: got termination signal, stopping
18:02:25.81 Warn: : 6790: got termination signal, stopping
18:02:25.86 Warn: : 6792: got termination signal, stopping
18:02:25.87 Err : : 6786: TT14006: TimesTen daemon disconnect failed: 6792/0x2aaab80008c0: disconnect complete: Disconnect not started. Info: 0 7064 0x1f758520 (/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32)
18:02:25.87 Err : : 6792: TT14000: TimesTen daemon internal error: subd: Monitor thread failed to disconnect, tt error 798 (TT0798: Daemon reports error 0 -- file "db.c", lineno 16124, procedure "sbDbDisconnect").
18:02:25.87 Warn: : 6786: got termination signal, stopping
18:02:25.91 Warn: : 6789: got termination signal, stopping
18:02:25.95 Warn: : 6791: got termination signal, stopping
18:02:26.05 Err : : 6786: TT14000: TimesTen daemon internal error: Could not connect to subdaemon port 43791
18:02:26.05 Err : : 6786: TT14006: TimesTen daemon disconnect failed: error -1 in stopManaging
18:02:26.05 Err : REP: 7064: TT_TT70_32:repagent.c(3338): TT16005: Failed to disconnect from datastore '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' for 'REPHOLD' thread
18:02:26.05 Err : REP: 7064: TT_TT70_32:repagent.c(3338): TT791: TT0791: Cannot communicate with subdaemon -- file "db.c", lineno 16124, procedure "sbDbDisconnect"
18:02:26.05 Warn: : 6786: 6792 ------------------: subdaemon process exited
18:02:26.05 Warn: : 6786: 6792 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1225031686 count=10
18:02:26.05 Warn: : 6786: daRecovery: subdaemon 6792, managing data store, failed: invalidate (failcode=202)
18:02:26.05 Warn: : 6786: Invalidating the data store (failcode 202, recovery for 6792)
18:02:26.11 Err : : 6786: Could not connect to subdaemon 6794, port 56784
18:02:26.28 Warn: : 6786: 6789 ------------------: subdaemon process exited
18:02:26.53 Warn: : 6786: 6791 ------------------: subdaemon process exited
18:02:26.59 Warn: : 6786: 6790 ------------------: subdaemon process exited
18:02:26.71 Err : : 6786: Could not connect to subdaemon 7064, port 45797
13:42:14.95 Warn: : 10502: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
13:42:32.63 Err : : 10502: TT14000: TimesTen daemon internal error: Error 22 creating shared segment, KEY 0x4e048006
13:42:32.63 Err : : 10502: -- OS reports invalid shared segment size
13:42:32.63 Err : : 10502: -- Confirm that SHMMAX kernel parameter is set > datastore size
13:42:32.63 Err : : 10508: subd: Error identified in [sub.c: line 2152]
13:42:32.63 Err : : 10508: subd: (Error 836): TT0836: Cannot create data store shared-memory segment, error 22 -- file "db.c", lineno 9572, procedure "sbDbConnect"
13:42:32.63 Err : : 10508: -- file "db.c", lineno 9572, procedure "sbDbConnect"
13:42:32.63 Warn: : 10508: subd: connect trouble, rc 1, reason 836
13:42:32.63 Err : : 10508: Err 836: TT0836: Cannot create data store shared-memory segment, error 22 -- file "db.c", lineno 9572, procedure "sbDbConnect"
13:42:32.63 Err : : 10502: TT14000: TimesTen daemon internal error: Could not send 'manage' request to subdaemon rc 400 err1 703 err2 836
13:42:33.63 Warn: : 10502: 10508 ------------------: subdaemon process exited
13:46:59.96 Warn: : 10502: 10605/0x819500: Recovery started
13:47:01.02 Warn: : 10605: subd: Warning identified in [sub.c: line 2152]
13:47:01.02 Warn: : 10605: subd: (Warning 20100): TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
13:47:01.02 Warn: : 10605: -- file "db.c", lineno 12011, procedure "sbDbConnect"
13:47:01.02 Warn: : 10605: subd: connect trouble, rc 2, reason 20100
13:47:01.02 Warn: : 10605: Warn 20100: TT20100: This connection required recovery due to an improper shutdown -- file "db.c", lineno 12011, procedure "sbDbConnect"
15:37:47.14 Warn: : 10502: 28930 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1392803846 count=1
19:41:05.92 Warn: : 10502: 28950 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=1
12:18:40.18 Warn: : 10502: 19264 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=16
19:09:15.13 Warn: : 10502: 29472 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=24
20:29:21.07 Warn: : 10502: 6896 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=27
11:11:30.98 Warn: REP: 18767: TT_TT70_32:receiver.c(2682): TT16060: Failed to read data from the network. select() timed out
14:26:06.81 Warn: : 10502: 25502 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=3
10:52:42.36 Warn: : 10502: 6487 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=12
11:06:20.50 Warn: : 10502: 15322 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=1
13:19:36.58 Warn: REP: 18767: TT_TT70_32:receiver.c(2682): TT16060: Failed to read data from the network. select() timed out
16:48:45.24 Warn: : 10506: got termination signal, stopping
16:48:45.48 Warn: : 10505: got termination signal, stopping
16:48:45.95 Warn: : 10502: 10505 ------------------: subdaemon process exited
16:48:45.95 Warn: : 10502: 10506 ------------------: subdaemon process exited
16:48:45.99 Warn: REP: 18767: got termination signal, stopping
16:48:46.20 Warn: : 10507: got termination signal, stopping
16:48:46.26 Warn: : 10502: got termination signal, stopping
16:48:46.86 Warn: : 10605: got termination signal, stopping
16:48:46.95 Warn: : 10502: 10507 ------------------: subdaemon process exited
16:48:46.99 Err : : 10502: TT14000: TimesTen daemon internal error: Could not connect to subdaemon port 36872
16:48:46.99 Err : : 10502: TT14006: TimesTen daemon disconnect failed: error -1 in stopManaging
16:48:46.99 Err : REP: 18767: TT_TT70_32:repagent.c(3338): TT16005: Failed to disconnect from datastore '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' for 'REPLISTENER' thread
16:48:46.99 Err : REP: 18767: TT_TT70_32:repagent.c(3338): TT791: TT0791: Cannot communicate with subdaemon -- file "db.c", lineno 16124, procedure "sbDbDisconnect"
16:48:46.99 Warn: : 10502: 10605 ------------------: subdaemon process exited
16:48:46.99 Warn: : 10502: 10605 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1594130438 count=10
16:48:46.99 Warn: : 10502: daRecovery: subdaemon 10605, managing data store, failed: invalidate (failcode=202)
16:48:46.99 Warn: : 10502: Invalidating the data store (failcode 202, recovery for 10605)
16:48:47.09 Err : : 10502: Could not connect to subdaemon 10510, port 58206
16:48:47.16 Err : : 10502: Could not connect to subdaemon 18767, port 49611
13:17:45.67 Warn: : 8602: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
13:17:52.84 Warn: : 8602: 8605/0x12207500: Recovery started
13:18:41.73 Err : : 8602: 8789/(nil): /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/snmp.ini: bad -trap_dest value SMARTS4: Host not found (authoritative answer)
13:31:31.49 Warn: : 8602: 5706 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1745125382 count=1
01:25:41.22 Warn: : 8602: 18419 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1745125382 count=158
10:29:11.03 Warn: : 8602: 30002 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1745125382 count=43
12:47:07.86 Warn: : 8602: Invalidating in-RAM shared data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because in use at exit
12:47:07.87 Warn: : 8602: 8605/0x123481a0: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
12:47:07.88 Warn: : 8605: Stopping subdaemon Log Marker thread for /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because db is invalid.
12:47:07.88 Warn: : 8602: 8605/0x123a47b0: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
12:47:07.96 Warn: : 8602: 8605/0x1243c900: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
12:47:08.88 Warn: : 8602: 8605 ------------------: subdaemon process exited
12:47:08.88 Warn: : 8602: 8605 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 1745125382 count=10
12:47:34.78 Warn: : 20263: Invalidating the data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because it had 11 users
12:47:34.78 Warn: : 20263: WARNING: data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 was in use at daemon termination.
12:47:34.78 Warn: : 20263: WARNING: data store no longer considered in use
12:47:34.78 Warn: : 20263: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
12:51:06.94 Warn: : 20263: 20266/0x14690500: Recovery started
16:29:00.34 Warn: : 20263: 22849 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 134512646 count=1
10:12:26.98 Warn: REP: 20784: TT_TT70_32:receiver.c(2682): TT16060: Failed to read data from the network. TimesTen replication agent is stopping
10:12:30.91 Warn: : 20263: Invalidating in-RAM shared data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because in use at exit
10:12:30.91 Warn: : 20263: 20266/0x1479ff40: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:30.91 Warn: : 20266: Stopping subdaemon Log Marker thread for /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because db is invalid.
10:12:30.91 Warn: : 20263: 20266/0x1488b830: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:30.96 Warn: : 20263: 20266/0x1486fa40: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:31.03 Warn: : 20263: 20266/0x2aaac40008c0: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:31.34 Warn: : 20263: 20266/0x2aaac401c6b0: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:31.40 Warn: : 20263: 20266/0x2aaac00008c0: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:31.66 Warn: : 20263: 20266/0x2aaac4078700: Forced Disconnect /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32
10:12:31.91 Warn: : 20263: 20266 ------------------: subdaemon process exited
10:12:31.91 Warn: : 20263: 20266 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 134512646 count=10
10:12:36.28 Warn: : 14678: Invalidating the data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because it had 11 users
10:12:36.28 Warn: : 14678: WARNING: data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 was in use at daemon termination.
10:12:36.28 Warn: : 14678: WARNING: data store no longer considered in use
10:12:36.28 Warn: : 14678: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
10:13:25.52 Warn: : 14678: 14683/0x5121500: Recovery started
10:10:12.39 Warn: : 14678: 15486 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=1
10:06:55.19 Warn: : 14678: 30796 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=2
09:58:48.69 Warn: : 14678: 12930 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=2
15:27:42.39 Warn: : 14678: 7811 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=2
10:16:36.60 Warn: REP: 14964: TT_TT70_32:receiver.c(2682): TT16060: Failed to read data from the network. select() timed out
10:53:27.24 Warn: : 14678: 11658 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=1
15:11:33.81 Warn: : 14678: got termination signal, stopping
15:11:34.63 Err : : 14678: Could not connect to subdaemon 14686, port 41664
15:11:34.72 Warn: : 14682: got termination signal, stopping
15:11:35.10 Warn: : 14681: got termination signal, stopping
15:11:35.11 Warn: : 14684: got termination signal, stopping
15:11:35.23 Warn: : 14683: got termination signal, stopping
15:11:35.35 Warn: : 14678: 14684 ------------------: subdaemon process exited
15:11:35.43 Warn: REP: 14964: got termination signal, stopping
15:11:35.53 Warn: : 14678: 14681 ------------------: subdaemon process exited
15:11:35.55 Warn: : 14678: 14682 ------------------: subdaemon process exited
15:11:36.29 Err : : 14678: TT14000: TimesTen daemon internal error: 14683: Error processing 'unmanage' in subdaemon rc -2
15:11:36.29 Err : : 14678: TT14000: TimesTen daemon internal error: Unparsable reply to unmanage
15:11:36.29 Err : : 14678: TT14006: TimesTen daemon disconnect failed: error -1 in stopManaging
15:11:36.29 Err : REP: 14964: TT_TT70_32:repagent.c(3338): TT16005: Failed to disconnect from datastore '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' for 'REPLISTENER' thread
15:11:36.29 Warn: : 14678: 14683 ------------------: subdaemon process exited
15:11:36.29 Err : REP: 14964: TT_TT70_32:repagent.c(3338): TT798: TT0798: Daemon reports error 0 -- file "db.c", lineno 16124, procedure "sbDbDisconnect"
15:11:36.30 Warn: : 14678: 14683 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 201621511 count=1
15:11:37.63 Warn: : 14678: Invalidating in-RAM shared data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because in use at exit
15:54:42.72 Warn: : 8962: Invalidating the data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 because it had 1 users
15:54:42.73 Warn: : 8962: WARNING: data store /opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32 was in use at daemon termination.
15:54:42.73 Warn: : 8962: WARNING: data store no longer considered in use
15:54:42.73 Warn: : 8962: WARNING: PL/SQL shared segment existed at time of daemon termination
15:54:42.73 Err : : 8962: TT14000: TimesTen daemon internal error: Could not destroy PL/SQL shared memory, error 22
15:54:42.73 Warn: : 8962: TimesTen Daemon Release 11.2.1.3.0.TT_tt70_32 started.
15:54:48.61 Warn: : 8962: 8973/0x17292500: Recovery started
16:15:24.25 Warn: : 8962: 5703 exited while connected to data store '/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32' shm 251953159 count=1
15:32:17.57 Warn: : 8962: 8974/0xff51500: Recovery started
15:32:55.78 Warn: REP: 28114: SIPT_TT_SUB4:receiver.c(2682): TT16060: Failed to read data from the network. select() timed out1)
TimesTen Release 11.2.1.3.0 (64 bit Linux/x86_64) (TT_tt70_32:53388) 2009-08-21T05:34:23Z
Instance admin: timesten
Instance home directory: /opt/timesten/tt7032/TimesTen/TT_tt70_32
Group owner: timesten
Daemon home directory: /opt/timesten/tt7032/TimesTen/TT_tt70_32/info
PL/SQL enabled.
2)
[TT_1121]
Driver=/opt/timesten/tt7032/TimesTen/TT_tt70_32/lib/libtten.so
DataStore=/opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_1121
DatabaseCharacterSet=US7ASCII
3)
kernel.shmmax = 2147483648
kernel.shmall = 2097152
4)
MemTotal: 8171576 kB
MemFree: 3754532 kB
Buffers: 312052 kB
Cached: 1656640 kB
SwapCached: 0 kB
Active: 3924072 kB
Inactive: 309660 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 8171576 kB
LowFree: 3754532 kB
SwapTotal: 8388600 kB
SwapFree: 8388600 kB
Dirty: 652 kB
Writeback: 4 kB
AnonPages: 2265060 kB
Mapped: 153924 kB
Slab: 126580 kB
PageTables: 12320 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 12474388 kB
Committed_AS: 4718116 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 284328 kB
VmallocChunk: 34359452663 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
Hugepagesize: 2048 kB -
My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your helpI'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field. -
After Migration Exchange 2013 does not send mail outside the organization
Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin HossainWhat I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25.
Maybe you are looking for
-
Need to clone one pixel at a time.
I use the clone stamp for very fine detail (using CS3). Why, when I sample one pixel, it clones four? I have six books on CS3 and can't find the answer. I am using a basic hard 1 pixel brush with 100% opacity, flow, and hardness. In other words, when
-
How to create Process chain in BI 7.0
hi, I dont know how to create process chain in BI 7. If any one have document step by step process to create process chain. help me. thank u.
-
Trouble recording 25% fill in an action
When recording an action, layer fill can be set as a numerical field, however the value is not recorded in the action despite the value actually being set. To duplicate: Open a documnet using Mac OS 10.7.3 start recording an action duplicate Backgrou
-
An external app (my work Lotus Notes webmail) wanted to install something and I accidentally clicked "deny" and "remember this", when I wanted to allow it. Now I have no idea where I can remedy this. Any ideas?
-
Where and How to Get OS X 10.7.5 or Higher
I have an older iMac with OS X 6.8 and an Intel processor. The TurboTax version I downloaded needs at least OS X 7.5 but I don't know where to get that or how to install it. If you can help, please explain without jargon, I'm not skilled at thi