WLC 2504 Airplay not working over wireless

Currently we are trying to use Airplay within our network and we're having really wierd issues.
First, we have 2 subnets: 192.168.x.x and 10.x.x.x
We have our wired Apple TV's on 192.168.x.x. and our wireless Apple TV's on 10.x.x.x
We also have wired computers on both networks. But all of our wireless clients are on 10.x.x.x.
So:
-Wired computers (in both subnets) can get to the wired Apple TV's.
-Wireless computer cannot get to any Apple TV's.
-Nothing can get to the wireless Apple TV's.
What I've done from other forums:
-I've enabled Global Multicast and set a multicast adddress
-I've tried it with and without IGMP snooping
-Enabled multicast routing on the switches that the Access Points are connected to
-Using Bonjour Browser, I don't see any AirTunes devices when I'm connected Wirelessly
Any help would be greatly appreciated

I've done that, but nothing has changed. But looking at the profiles:
Profile Name                                   default-mdns-profile
Profile Id                                         1
Service Count                                  7
No. of Interfaces Attached                0
No. of Interface Groups Attached      0
No. of Wlans Attached                     1
I can't find where I can set in the WLAN where the profile is applied. We only have 1 interface connected to the controller (interface 1 which is the management interface). I'm assuming that it only needs to be applied to the WLAN, but I'm wondering if this is set to the right WLAN. Where can I find this?

Similar Messages

Airplay not working over wireless, works over ethernet?

I posted this in multiple forums in which it applies to.
Just looking for troubleshooting suggestions from my wireless N MBPro, to my wired ATV2. Here is the rundown (all devices running latest updates):
1)used to work just fine with old router
2)airplay works in all directions, from wireless devises to the wired ATV2
3)updated to a much newer N router from cisco
4)now, airplay works over Ethernet from itunes to ATV2 (and iphone4s to ATV2), ATV2 plays music from my MBPro just fine
5) however airplay fails to work from itunes to ATV2 over wirelesss
6)all wireless connections are sound, it is not a bandwidth problem, it literally says "connecting to apple tv" and never stops or connects
7)itunes sees the ATV2 just fine over both Ethernet and wireless connections, i can select ATV2 as an output even when on wireless
8)it will even ask for the password once i select it
So, any suggestions? I just dont know where I am going wrong, somehow the wireless aspect is the broken link. As a side note, all wireless clients and wired clients are on the same subnet.
Thanks for any suggestions or help!

I had the same problem. Disable any IGMP, or IGMP proxy features on your router. As soon as I disabled IGMP proxy on my router everything came up has been working for a while. Lack of driver support on the wireless clients is likely the cause. oh well, at least its working now.

AirTunes not working over wireless from Windows 7

Setup:
Dell Inspiron 15 laptop (Windows 7 Home Premium)
Airport Express
Network:
ADSL router
+- Desktop PC (ethernet to router)
+- Airport Express (ethernet to router)
+- Dell laptop (wireless to Airport Express)
The Airport Express creates a wireless network (802.11n, 2.4GHz). The Dell laptop can't see the speakers. My Macbook Pro works fine. I've determined that the problem is that IPv6 isn't working over wireless. The Dell laptop can't see the Airport Express with the Airport Utility either.
When I plug the Dell laptop into the ethernet on the ADSL router, everything starts working fine. If you look at the interface information DHCPv6 is up.
Without the cable plugged in my wireless connection says:
IPv6 Connectivity: No network access
When a cable is plugged in:
IPv6 Connectivity: No internet access
(which is how it should be).
I am pulling my hair out here and have absolutely no idea why this won't work.
Firewall is completely disabled. The router also creates an 802.11g network but it's settings shouldn't matter (wireless isolation, which is turned off, and so on).
Any suggestions?

Hi,
Download and install the switchable graphics driver on the following link.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59147.exe
When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

[T400] Cisco VPN client not working over wireless adapter (but works on cabled connection)

I have a very strange problem.
I need to connect to my work via the cisco vpn client (version 5.0.00.0340).
My previous laptop (T43 , windows XP) worked well through both wired / wireless connections. My desktop machine (vista) works via wired connection (it has no wireless connection).
On my new T400, the VPN client works via a wired connection but not via the wireless adapter.
On the wireless apapter, the vpn seems to connect OK, but when I try to access resources via the VPN there is little response.
I get this in the vpn log...
405 08:56:57.073 04/16/09 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xa4510009 (IPSecDrvCB:846)
I've tried disabling the firewall (in both the T400 and the router), removed access connections, and disabling tcp v6. I've rebooted everything too.
But, nothing seems to work. I suspect the problem is on the t400 somewhere, because the old laptop used to work OK via wireless.
I've seen some google links on cisco vpn not working via wireless but nothing seems to apply to my exact situation yet.
Anyone else had this problem or know of a fix? Thanks in advance.
Solved!
Go to Solution.

all good now, got it working.
The Deterministic network thing was not installed on the wireless adapter for some reason.
So, I installed the latest wireless driver, reinstalled the vpn and all is good now.

Itunes Sharing not working over wireless

I have three PC's both running the latest version of ITunes.
Desktop 1 is running Windows XP and connects directly into the Action Tec Router via a wired connection.
Laptop 1 is running Windows 7 and connects to the Action Tec router via a wireless connection.
Laptop 2 is running Windows Vista and connects to the Action Tec router via a wireless connection.
All PC's can connect on the Internet. The wireless connection uses WPA/PSK. Any firewalls are disabled.
Desktop 1 can see the Library of both Laptop 1 and Laptop 2. From Desktop 1, When I click the library of laptop 1 Itunes says "laptop1 library is not responding".
Laptop 1 and Laptop 2 do not see the library of either Desktop 1 or the other Laptop.
If I move Laptop 1 from a wireless connection to a wired connection, the sharing works fine.
Anyone know why the wireless is causing Itunes sharing to not work?
Thanks, Jim
Solved!
Go to Solution.

So this morning I was playing the Windows 7 laptop and decided to delete my windows wireless profile on the laptop called home and my existing home SSID on the Verizon router. I created a new SSID called boo with no security. I connected to that SSID and Itunes sharing worked between the desktop and laptop. I then added WPA2/PSK to the boo SSID and sharing still worked. Finally I went back to my original SSID called home and WPA2/PSK, recreated the home profile and Itunes sharing worked again.
I then went to the Windows Vista Laptop and without making any changes to it, Itunes sharing worked.
So in the end it seems deleting the current SSID configuration and rebuilding it on the verizon router cured the problem (for now).
Jim

Facebook App not working over 3G, but works over Wi-Fi.

I have a BlackBerry® Curve™ 3G 9330 Social Messaging Ready smartphone. My current software version is 6.0 Bundle 2333. My Facebook application worked perfectly fine when I got the phone a few months ago over the Verizon 3G network and Wi-Fi, but when I recently updated Facebook to version 2.0.0.58, it does not work over 3G anymore. But everytime I try to connect via 3G it says "We cannot reach the Facebook server at this time. Please try again later. (100)" It does however still work over Wi-Fi.
I have tried various attempts to fix it: uninstalling the App and re-installing it and also removing the battery and putting it back in (hard reset), but nothing has worked.
Is anyone else have this same issue? Is there a way to restore my Blackberry to its factory settings so that I can just use the older version of the Facebook App [that was previously installed]?
Thank you.

Hey metalhourse90,
I can see from your PIN that you currently don't have browsing services included in your data plan. I would advise contacting your wireless provider to have this enabled.
Thanks,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Home Sharing not working between wireless PC's / devices and ethernet wired PC's on the same router.

Home Sharing is not working between wireless PC's / devices and ethernet wired PC's on the same router. I installed a new Verizon FIOS ActionTec MI424WR GigE wireless / ethernet router, replacing the original FIOS router. With the old router Home Sharing worked fine across and among all iOS and Windows wired and wireless devices. With the new router Home Sharing works between and among the Wired PC's but not between the wired PC's and the Wireless connected PC's or iOS devices. Home Sharing also works between and among the wireless connected PC's and iOS decices but not between them and the wired PC's.
Only the router was changed. No changes were made to any of the devices except all were updated with the latest version of iTunes 10.7.0.21 and the iSO devices were updated to iOS vrsion 6.01. Three PC's are wired and all are running Windows 7. There also is a Windows Home Server connected to the router by ethernet port. It does not run iTunes but does provide WebDAV services to my iOS devices. This works fine. Two PC's are wireless, one running Windows 7 and one running Windows 8. All of the PC's are connected to the same (new) router via it's ethernet ports and it's wireless access point. Two of the wired PC's are connected via a high-speed ethernet hup that is connected to the router (Home Sharing works fine between the two PC's on the hub and the PC on the router). All wired and wireless devices on the router are visible and members of the router's Home/Office virtual network.
All of the PC's are visible in the Windows network and all shared files are accessable from all PC's, both wired and wireless.
Obviously the router seems to be the issue, something between the ethernet and the wireless access point components. I checked the settings and found nothing that would prevent Home Sharing between the wired and wireless devices. There is no setting that isolates the wireless network. I have done the following:
Read the router user manual and checked all the settings
Rebooted the router and tested.
Turned off the router's firewall and tested.
Home Sharing is turned on all the devices and all use the same Apple ID.
Restarted iTunes and tested.
Verified iTunes is "Allowed" in each PC's firewall.
Again, I can Home Share between the two wireless PC's but not between either of the wireless PC's and any of the wired PC's. I can Home Share between my iPads and iPhones and either of the two wireless PC's but not with any of the wired PC's. I can Home Share between any of the wired PC's but not between any wired PC and a wireless PC or iOS device.
I hope someone may have had a similar problem and has a fix suggestion. I'm stumped! I have a;so contacked ActionTec and awaiting an answer.

Solution from ActionTec is:
Log into your router.
Click the Advanced icon
Cclick Yes
Click on the IGMP Proxy
Select Disable
Click Apply

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

If You are trying to watch content when you are downloading, it let it download then watch it this works for me as i had the same problem.

HT1750 space.bar.and.delete.key.not.working.on.wireless.keyborad

space.anddelte
space.and.delete.keys.not.working.on.wireless.keyboard.help!

Before replacing the keyboard do 2-3 SMC resets using the instructions in iMac SMC and PRAM reset

IMessage is not working over wifi. I need HELP D:

My iMessage is not working over wifi. But it's only at my house. Actually it worked a while ago but then it stopped working.
The browser, email, app store, youtube and any other apps are working just fine over the wifi. It's only my iMessage. It won't send any message. It say message not delivered. Does anybody what is going on and what can I do to fix it? Thanks, before. (:

I recently moved my library on my time capsule
You mean you moved your music files to the external. The library is more than the music files.
Just copy the \Music\iTunes\ folder from internal to the Time Capsule.
Add the Time Capsule to your Login items in System prefs -> Accounts.
Hold Option and launch iTunes and select *Choose library*.
Select the iTunes library file int ehiTunes folder on the Time Capsule.
It is hte samae library you have previously. All artwork playlists, ratings, songs, movies, etc. will be there.
Genius is already there so nothing needs to be done.

BBM not working over mobile network

BBM on Q10 not working over mobile network.
Working only via wifi.
Carrier: KSA STC
OS: Official 10.2.1.2102
Please help.
Its very disappointing that bbm is not working on bb.

Can you try sending a BBM friend a PIN message, not in BBM, but in your Compose Message > PIN.
You will need that contact's BBM PIN number...
Do you see the message sent, and does it hae a D beside or R afterwards?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS3276 when I use cable my mail does not work. with wireless ok

when I use cable my mail does not work. with wireless ok

Unpower and restart it. If that doesn't help, try holding menu and left navigation keys TOGETHER for 6 secs.
AC

Apple TV gen 3 - AirPlay not visible on wireless network

Hi,
I've just bought a new Apple TV gen 3 however I could not get the airplay to work properly (both on my iPad 2 & iPhone 4s).
A little background info regarding my current network setup, due to the location of my room from my living area I could not get strong signal from my wireless network. To solve the problem I've installed an additional access point in my room with different SSID but utilizing the existing internet access via a powerline network adapter. This has solved my wireless coverage issue within my home.
As my Apple TV is installed in my room, I connected it to the wireless network in my room. Everything is working well (i.e. access to internet, connecting to my iTune account etc and YouTube are no problem) except AirPlay. I can't see the AirPlay icon on both my other apple devices. However, I can use the Remote app on my iPad to control my Apple TV but just cannot use AirPlay to stream anything from my other devices to Apple TV.
I tried everything such as reset the Apple Tv & reinstalling its software, soft resetting my other devices and forgetting the network etc but to no avail. I suspect that the problem may be related to my wireless network so I tried connecting the Apple Tv to my original wireless network, it can connect but the signal is rather weak. I then connect my iPad to the same network. This time I did get the AirPlay to work but due to the weak signal on the iPad using the original wireless network AirPlay keeps dropping off nd when it works it is very slow.
Is there any ways of getting AirPlay to work properly over the new network in my room which has much stronger signal if I connect both my oPad nd Apple TV to it? Pls help....

Hi jcool17,
Thanks for replying. Yes I do have 2 SSID broadcasting and all my devices are apple devices are connected to the same SSID which is in my room but AirPlay won't work.
No, my current wireless devices in my room is not Apple. Used to have an Apple Airport Express but it died on me after 3 years. Got a good deal on a Dlink which I bought to replace the The AE.
And yes, AirPlay is turned 'on' on my Apple TV.

Airplay not working with an ASA in the middle

Hi All
This is my case: In the lab I could configure mDNS on my 5508 with the global multicast and igmp snooping disabled. Only I needed was Global mDNS multicast enabled (based on Cisco Guide) and it worked fine under the following scenarios:
All the services connected wireless
IPAD on subnet A and Apple TV on subnet B, no Firewall in the middle. Peer to Peer Blocking in the WLC was any DROP or DISABLED and it worked fine.
BUT, when I moved into production environment, the only way that it works is by having both Apple Devices in the same subnet with the Peer to Peer bloking DISABLED. I have a firewall ASA in the middle so I do not know what should I check in the firewall to allow Airplay to work.
However, there is something really weird. in the IPAD, I can see the AIRPLAY icon at the bottom of the screen, when I click on it, I can see MIRRORING button and I moved it to the right to activated it BUT nothing happens on the AppleTV connected to an screen. I mean, looks like the request for MIRRORING from the IPAD to the Apple TV device is not reaching the last one. A few seconds after activating MIRRORING in the IPAD looks like the request is dropped since that the mirroring is not active.
Is there any particular multicast configuration required in the ASA including ports (like 5353 udp)?
I have an open case with TAC but any ideas are welcomed.
By the way, I am running v 7.6 in the WLC in order to implement mDNS (traffic between ssid's subnet managed by the WLC - Bonjour Gateway is not neccesary)
thanks
Abraham

Hi David,
Let me share with you my findings. Apple TV requires more than 5353 port opened. Please see the following link and include in your ASA those additional ports/range. I mean, 7000, 7100, 5000 (udp/tcp), etc etc.
http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/apple-macbook-airplay-appletv-firewall-port-findings/td-p/55048
After opening those ports, the service is working BUT with significant LATENCY/SLOWNESS which we are trying to solve.
We took some packets captures on the ASA ingress/egress interfaces for both contexts (see pictures attached) and I could see many retransmissions and duplicated ACK so I tried something else that worked (see Apple TV Works attached file) BUT this is not the final solution we need so we are still working on this issue in order to check if there is something wrong with our routing/switching process in the 6500 LAN SW.
I created static routes in the ASA contexts to communicate the IPAD to the APPLE TV (ports already opened in the ASA as indicated before) without traversing the Wireless 6500 SW (test performed on VLAN A and VLAN B) and it worked fine. However as I said, this is not the solution we want because the Wireless 6500 SW must manage inter-ASA-contexts traffic.
In addition to that I attached another picture/diagram that shows when Apple TV service fails-latency (traffic crossing the Wireless 6500 SW for communication between ASA contexts).
Important to say that I am NOT using MULTICAST or BROADCAST ENABLED in the WLC. I am based on mDNS as indicated in the Cisco Guide/Instructions for version 7.5 and above.
Hope this helps.

WLC 2504 Airplay not working over wireless

Similar Messages

Maybe you are looking for