WLC 2504 problems with one IP address range

I am having an interesting issue configuring a new 2504.
How it is setup:
Port 1 management with vlan tagging on vlan 111
Port 2 trunking with ap-manager2 on vlan 3, 102 on vlan 102 (Not ap-manager), and 1001 on vlan 1001.
All of the vlans have distinctive and unique IP ranges. Vlan 111 is running 172.16.128 /20, 102 is 172.19.252 /23 and vlan 1001 should be running 172.17 /16.
Here is my problem. I can setup all of the dynamic interfaces on the appropriate ip ranges, but for some reason when I configure the 1001 vlan dynamic interface with the /16 address space, I lose connectivity to the GUI managment interface. I have to go in through the CLI and remove the interface or change the IP range. I have tried other /16 address space on that vlan and do not have a problem with them. the 172.17 space appears to be the only one that will not work.
I have attached the config from the controller (Minus some site specific stuff like the SNMP community and wpa stuff.) The config is using a 172.20 /16 right now on the 1001 interface so that I could get into the controller and download the config. It should be 172.17 /16. The acutal IP info should be 172.17.4.253 255.255.0.0 172.17.0.254
My computer is on the 1001 vlan and I have verified the IP is not in use and am using the same subnet, gateway etc as I am trying to configure the wlc with.
Switch config:
Port 1 is plugged into g0/2 with the following config
interface GigabitEthernet0/2
switchport trunk allowed vlan 1,3,102,111,1001
switchport mode trunk
spanning-tree portfast
Port 2 is plugged into fa0/47 and just has switchport mode trunk.
How can I get the interface to work with the proper IP range for vlan 1001?

I finally had a chance to fiddle around with this issue again and have some more information on the problem. It appears to not be an issue with the IP address, but rather with the VLAN. The 172.17.0.0/16 subnet is on VLAN 1001 which it appears the WLC does not care for. This problem is repeatable on the following versions of code that I have tried:
7.0.220.0
7.1.91.0
7.4.110.0 (Not in use for production until we upgrade from WCS to Prime.)
Any thoughts? Moving the 1001 VLAN to another number would be a HUGE undertaking so if there is not an answer within the firmware on the WLC, I will have to bridge two VLANs with bpdufilter enabled... Not my first choice for sure...

Similar Messages

TS3276 I have recently had a problem with one of my hotmail accounts, some sort of virus sending random emails to people in my address book. Hotmail advised me to change my password for that account, which I did. Why won't mail recognise the new password?

I have recently had a problem with one of my hotmail accounts, some sort of virus sending random emails from my address book. Hotmail advised me to delete all contacts and change the password for that account, which I did on my laptop running windows XP. The change was successful and I was able to send and receive emails with no problem. I then had to change the account password on my iPhone 4s, which I did and it too was successful but when I came to change the password on my iMac, running the latest version of Lion it would not recognise the new password. I have tried to remove the account details and re-install but every time I go to add new account my old details are in the box. This is very frustrating as I use my iMac for all my profects and I need to access my email. Please help.

hi guys,
I had already deleted all reference to the hotmail account in question from the keychain access app, I have also tried to delete and re-instal the account details from within mail. The icon in the side bar dissapears but when I go to Add Account, the old account details are in the new account box. I then input my new password but am told that the server does not recognise it. If I access hotmail via google on the iMac I can get into my account with no problems. I am thinking there must be some other form of security system within the mac software that is blocking the new password. This is driving me nuts. I have been trying to resolve this for the last two days. Thank you for your advise anyway.

How Does one fix this-"This Mac can't connect to iCloud because of a problem with "My Email Address"

Hello Apple Community: I receive this message multiple times a day.
"This Mac can't connect to iCloud because of a problem with "My Email Address" Open iCloud preferences to fix this problem.
After sighing into iCloud I can not find a problem.
Is this a Yosemite issue, because thats when the issue started?
Thanks for your help..

Yes, this is a constant problem for me as well. I have 2 Macs (iMac and old MacBook Pro) running Yosemite. I seem to only get this message on the iMac. I've tried logging out of ICloud on both and logging back in; the problem re-appears randomly. I also have no issue on IOS devices.
It's mainly annoying. I open the iCloud panel in System Preferences and it tends to go away.

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Cisco ASA 5505 - problem with negotiating IP address from PPPoE

Hi all,
I have problem with negotiating IP address from PPPoE. There is following design: ISP providing vDSL ending on VDSL modem in bridge mode. Behind brigde modem is ASA 5505 terminting PPPoE on OUTSIDE. Everything works fine except negotiating IP address from PPPoE server.
I have configured ASA 5505 with (ASA Version 9.2(2)4) for PPPoE like this [1.]. But If i try to "show" IP address on OUTSIDE interface a get this [2.], ok strange but let's continue. If list "show vpdn pppinterface id 1" i get this [3.]. Seems that I got public IP addres what was right, but this IP address was not associated with interface OUTSIDE?
Well, if I set IP address manually like this [4.] and also set a default route everything works fine but what will happen when ISP change reservation for my IP address or default gateway.
I have tried different version of ASA OS like 8.4, 9.1 but without luck.
Can anybody help me. Thanks a lot.
Regards
Karel
[1.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address pppoe setroute
vpdn group O2 request dialout pppoe
vpdn group O2 localname O2
vpdn group O2 ppp authentication chap
vpdn username O2 password *****
interface Ethernet0/0
description >>uplink O2 vDSL<<
switchport access vlan 100
[2.]
ciscoasa(config-if)# show ip address vlan 100 pppoe
ciscoasa(config-if)# 0.0.0.0 255.255.255.255 on Interface: OUTSIDE
ciscoasa(config-if)# show interface vlan 100 detail
Interface Vlan2 "OUTSIDE", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
        Description: >>VLAN pro pripojeni do internetu<<
        MAC address f44e.05d0.6c17, MTU 1492
        IP address unassigned
Traffic Statistics for "OUTSIDE":
        28 packets input, 1307 bytes
        31 packets output, 721 bytes
        0 packets dropped
      1 minute input rate 0 pkts/sec, 3 bytes/sec
      1 minute output rate 0 pkts/sec, 1 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Control Point Interface States:
        Interface number is 15
        Interface config status is active
        Interface state is active
[3.]
ciscoasa(config-if)# show vpdn pppinterface id 1
PPP virtual interface id = 1
PPP authentication protocol is CHAP
Server ip address is 88.103.200.41
Our ip address is 85.71.188.158
Transmitted Pkts: 20, Received Pkts: 16, Error Pkts: 0
MPPE key strength is None
MPPE_Encrypt_Pkts: 0, MPPE_Encrypt_Bytes: 0
MPPE_Decrypt_Pkts: 0, MPPE_Decrypt_Bytes: 0
Rcvd_Out_Of_Seq_MPPE_Pkts: 0
ciscoasa(config-if)# show vpdn session state
%No active L2TP tunnels
%No active PPTP tunnels
PPPoE Session Information (Total tunnels=1 sessions=1)
SessID TunID Intf     State       Last Chg
22298      2 OUTSIDE SESSION_UP 561 secs
[4.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address 85.71.188.158 255.255.255.255 pppoe setroute
route OUTSIDE 0.0.0.0 0.0.0.0 88.103.200.41 1

You're right that the ACL should not affect otherwise allowed communications to the interface address.
Try disabling the ip audit feature on your outside interface.
no ip audit interface OUTSIDE AP_OUTSIDE_INFO
no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK

How do I delete an Apple ID account. I apparently have 2 IDs associated with one email address.

how do I delete an Apple ID account. I apparently have 2 IDs associated with one email address.

If you go onto your ipod, under settings, scroll down to icloud, there should be a botton that says, "delete account". push this, and it should delete an account.

My folders in my email accounts are not on my phone? Only with one email address are they.

My folders in my email accounts are not on my phone? Only with one email address are they. Any reason why?

Care to share which OS, email client & versions you are using?
iOS is for mobile devices.

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

Codec problem with one gateway

I am having a very strange problem with one of my gateways. No matter how I set up my regions and device pools I continue to have all calls go through this gateway as G729. This would be fine except that I can't do conference calls because of codec mismatches.
The gateway is a PRI running H323. CM 3.2.2(c) Gateway is a 3640 running 12.2.11(t)
All regions are currently set to G711.
I read something about a command under voice-port that sets the default codec. What I don't understand is, if this is what is causing it to go to G729, why is this the only gateway that ignores the regions.
Any help would be appreciated.

Cisco VoIP gateways support the codec negotiation feature. This feature provides the ability for a Cisco VoIP gateway to connect to other VoIP devices without necessarily knowing which codec is used for a call-setup. Also, this feature allows Cisco VoIP gateways to dynamically adjust to changes on remote devices. As long as the codec used by the remote VoIP device matches the capabilities-list of the Cisco VoIP gateway, the VoIP call is completed.
The following example shows how to configure codec negotiation:
Cisco-router# config t
Cisco-router(config)# voice class codec 1
!--- This sets up class 1 to be assigned to the dial peer.
Cisco-router(config-class)#codec preference 1 g723r63
Cisco-router(config-class)#codec preference 2 g729ar8
Cisco-router(config-class)#codec preference 3 g711ulaw
Cisco-router(config-class)#codec preference 4 g726r32 bytes 240
!--- These commands define the preferred codec list using 1,2,3, and 4 to set the preference.
Cisco-router(config)#dial-peer voice 1 voip
Cisco-router(config-dial-peer)#voice-class codec 1
!--- This assigns voice-class codec 1 to the dial-peer
Cisco-router(config-dial-peer)#destination-pattern 4723155
Cisco-router(config-dial-peer)#session target ipv4:192.168.100.1

Entire JDBC communication stopped if problem with one single JDBC interface

Hello,
Will the entire JDBC communication stopped if problem with one single JDBC interface?
Thanks,
Soorya.

hi surya,
this will happend if u use maintain order at runtime at interface determination.
just uncheck this option if u dont neet EOIO.
if you are getting the problem if u r going for EO then the problem might be using same JDBC channel for all interfaces.
if each interface is expected with a high load then it better to go for dedicated channels for interfaces.
like INTERFACE A should use JDBC A channel and INTERFACE B should use JDBC B channel.
Thanks & Regards,
Rama krishna

JDBC communication stopped if problem with one single JDBC interface

Hello,
Can you please explain this phrase
"JDBC communication stopped if problem with one single JDBC interface"
THanks,
Soorya

If you are having a problem with a JDBC interface (lets consider this to be a communication channel) then the communication is stopped (via that channel) (only in the case of EOIO).
Hope this clarifies.
Cheers,
Sarath
Award if helpful.

LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me. Only have a problem with one. Is there a fix?

LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me between the locations. Only have a problem with one that inappropriately ejects when the Air sleeps (and only sometimes). Is there a fix? I've read others who believe that the problem is with the operating system (I'm using 10.9.2). But my problem suggests that it's with one of the LaCie's. Any suggestions about how to fix?

Lacie doesnt make HD, thats a Seagate inside the box.
Is there a fix?
Yes, get a 4TB max HD, 6TB drives are both new and have known issues, ...in fact so do most all 4TB drives.
my problem suggests that it's with one of the LaCie's
You mean Seagate
Large external hard drives are great! Large external hard drives are horrible
It is a common premise that people are overjoyed at the dropping prices per terabyte on external hard drives, and the first thing that enters most peoples minds is "great, I can put all my stuff on one drive,... all of it!" However considerations need to be made in creating a giant single choke point for not mere data loss, but seriously large data loss. If there is at the very least yet another redundant copy, this is fine, otherwise do not consider it whatsoever. Some 3TB and 4TB drives of all mfg. have, at the time of this writing, reliability concerns currently and best recommendation is staying at 2TB drives or less.
Advantages and disadvantages of larger 3TB and 4TB external drives must be weighed

Problem with one to one unidirectional relation

Hi,
I have one problem with one to one relation ship. While i am trying to persist the objects it is showing that "parent key not found" exception. Is there any problem with my class configuration ?..
Table description:having two tables with same composite primary key
ECommSchema table has one composite primay key and the ECommSchemaDet table also has the same composite primary key. In second table (ECommSchemaDet) composite primary key fields are refering(foreign key relation ship) from the first table.
My entity classes are....
@Entity(name = "E_COMM_SCHEMA")
@Table(name = "E_COMM_SCHEMA", uniqueConstraints = {})
public class ECommSchema extends ParentEntity implements java.io.Serializable{
// Fields
private ECommSchemaDet eCommSchemaDet;
// Constructors
/** default constructor */
public ECommSchema(){
/** minimal constructor */
public ECommSchema(ECommSchemaId id, String descBriefEng, Date effectiveFrom, Currencies currencies){
this.id = id;
this.descBriefEng = descBriefEng;
this.effectiveFrom = effectiveFrom;
this.currencies = currencies;
/** full constructor */
@OneToOne(cascade = { CascadeType.ALL })
@PrimaryKeyJoinColumns({ @PrimaryKeyJoinColumn(name = "COMP_CODE", referencedColumnName = "COMP_CODE"),
@PrimaryKeyJoinColumn(name = "CODE", referencedColumnName = "SCHEMA_CODE") })
public ECommSchemaDet getECommSchemaDet(){
return eCommSchemaDet;
public void setECommSchemaDet(ECommSchemaDet commSchemaDet){
eCommSchemaDet = commSchemaDet;
@SuppressWarnings("serial")
@Entity(name = "E_COMM_SCHEMA_DET")
@Table(name = "E_COMM_SCHEMA_DET", uniqueConstraints = {})
public class ECommSchemaDet implements java.io.Serializable{
private ECommSchema ECommSchema;
// Constructors
/** default constructor */
public ECommSchemaDet(){
/** minimal constructor */
public ECommSchemaDet(ECommSchemaDetId id, ECommSchema ECommSchema, String calcBase, String multiTier, String distMethod,
Double brokerRebate, Double ticketCharge){
this.id = id;
this.ECommSchema = ECommSchema;
this.calcBase = calcBase;
this.multiTier = multiTier;
this.distMethod = distMethod;
this.brokerRebate = brokerRebate;
this.ticketCharge = ticketCharge;
/** full constructor */
public ECommSchemaDet(ECommSchemaDetId id, ECommSchema ECommSchema, String calcBase, String multiTier, String distMethod,
Double brokerRebate, Double ticketCharge, String distMethodClient){
this.id = id;
this.ECommSchema = ECommSchema;
this.calcBase = calcBase;
this.multiTier = multiTier;
this.distMethod = distMethod;
this.brokerRebate = brokerRebate;
this.ticketCharge = ticketCharge;
this.distMethodClient = distMethodClient;
// Property accessors
@OneToOne(cascade = { CascadeType.REFRESH }, fetch = FetchType.EAGER, mappedBy = "eCommSchemaDet")
public ECommSchema getECommSchema(){
return this.ECommSchema;
public void setECommSchema(ECommSchema ECommSchema){
this.ECommSchema = ECommSchema;
Error message is
Local Exception Stack:
Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))): oracle.toplink.essentials.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-02291: integrity constraint (ETRADE_4BM.FK_ECOMM_SCH_DET) violated - parent key not found
Error Code: 2291
Call: INSERT INTO E_COMM_SCHEMA_DET (DIST_METHOD, BROKER_REBATE, CALC_BASE, TICKET_CHARGE, DIST_METHOD_CLIENT, MULTI_TIER, SCHEMA_CODE, COMP_CODE) VALUES (?, ?, ?, ?, ?, ?, ?, ?)
     bind => [T, 23.0, A, 23.0, T, N, 8, 1]
Query: InsertObjectQuery(com.path.tradeManager.entities.ECommSchemaDet@44fbf5)
     at oracle.toplink.essentials.exceptions.DatabaseException.sqlException(DatabaseException.java:311)
     at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:654)
     at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:703)
     at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:492)
     at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:452)
     at oracle.toplink.essentials.internal.sessions.AbstractSession.executeCall(AbstractSession.java:690)
     at oracle.toplink.essentials.internal.sessions.IsolatedClientSession.executeCall(IsolatedClientSession.java:150)
     at oracle.toplink.essentials.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:228)
     at oracle.toplink.essentials.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:214)
     at oracle.toplink.essentials.internal.queryframework.DatasourceCallQueryMechanism.insertObject(DatasourceCallQueryMechanism.java:346)
     at oracle.toplink.essentials.internal.queryframework.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:191)
     at oracle.toplink.essentials.internal.queryframework.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:205)
     at oracle.toplink.essentials.internal.queryframework.DatabaseQueryMechanism.insertObjectForWrite(DatabaseQueryMechanism.java:564)
     at oracle.toplink.essentials.queryframework.InsertObjectQuery.executeCommit(InsertObjectQuery.java:89)
     at oracle.toplink.essentials.internal.queryframework.DatabaseQueryMechanism.performUserDefinedWrite(DatabaseQueryMechanism.java:750)
     at oracle.toplink.essentials.internal.queryframework.DatabaseQueryMechanism.performUserDefinedInsert(DatabaseQueryMechanism.java:714)
     at oracle.toplink.essentials.internal.queryframework.DatabaseQueryMechanism.insertObjectForWriteWithChangeSet(DatabaseQueryMechanism.java:602)
     at oracle.toplink.essentials.queryframework.WriteObjectQuery.executeCommitWithChangeSet(WriteObjectQuery.java:162)
     at oracle.toplink.essentials.internal.queryframework.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:390)
     at oracle.toplink.essentials.queryframework.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:109)
     at oracle.toplink.essentials.queryframework.DatabaseQuery.execute(DatabaseQuery.java:628)
     at oracle.toplink.essentials.queryframework.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:555)
     at oracle.toplink.essentials.queryframework.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:138)
     at oracle.toplink.essentials.queryframework.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:110)
     at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2233)
     at oracle.toplink.essentials.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:952)
     at oracle.toplink.essentials.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:909)
     at oracle.toplink.essentials.internal.sessions.CommitManager.commitNewObjectsForClassWithChangeSet(CommitManager.java:269)
     at oracle.toplink.essentials.internal.sessions.CommitManager.commitAllObjectsForClassWithChangeSet(CommitManager.java:246)
     at oracle.toplink.essentials.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:202)
     at oracle.toplink.essentials.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:2657)
     at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1044)
     at oracle.toplink.essentials.internal.ejb.cmp3.base.RepeatableWriteUnitOfWork.commitToDatabase(RepeatableWriteUnitOfWork.java:403)
     at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithPreBuiltChangeSet(UnitOfWorkImpl.java:1160)
     at oracle.toplink.essentials.internal.ejb.cmp3.base.RepeatableWriteUnitOfWork.writeChanges(RepeatableWriteUnitOfWork.java:276)
     at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerImpl.flush(EntityManagerImpl.java:350)
     at com.sun.enterprise.util.EntityManagerWrapper.flush(EntityManagerWrapper.java:626)
     at com.path.tradeManager.dao.ECommSchemaDaoBean.save(ECommSchemaDaoBean.java:86)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.enterprise.security.application.EJBSecurityManager.runMethod(EJBSecurityManager.java:1067)
     at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:176)
     at com.sun.ejb.containers.BaseContainer.invokeTargetBeanMethod(BaseContainer.java:2895)
     at com.sun.ejb.containers.BaseContainer.intercept(BaseContainer.java:3986)
     at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:203)
     at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:117)
     at $Proxy133.save(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:233)
     at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:152)
     at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(BCELStubBase.java:225)
     at com.path.tradeManager.daoInterface.__ECommSchemaDaoInterface_Remote_DynamicStub.save(com/path/tradeManager/daoInterface/__ECommSchemaDaoInterface_Remote_DynamicStub.java)
     at com.path.tradeManager.daoInterface._ECommSchemaDaoInterface_Wrapper.save(com/path/tradeManager/daoInterface/_ECommSchemaDaoInterface_Wrapper.java)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.path.tradeManager.tunnelGate.RequestHandler.callMethodByReflection(RequestHandler.java:181)
     at com.path.tradeManager.tunnelGate.RequestHandler.handle(RequestHandler.java:150)
     at com.path.tradeManager.tunnelGate.TunnelServlet.doPost(TunnelServlet.java:37)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
     at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:290)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
     at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Caused by: java.sql.SQLException: ORA-02291: integrity constraint (ETRADE_4BM.FK_ECOMM_SCH_DET) violated - parent key not found
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:124)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:622)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:180)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:542)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1027)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2887)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:2959)
     at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:647)
     ... 92 more
Jul 8, 2008 4:17:07 PM com.sun.enterprise.server.logging.SystemOutandErrHandler$LoggingByteArrayOutputStream flush
INFO: FATAL[08-07-08 16:17:07][com.path.tradeManager.dao.ECommSchemaDaoBean->save][javax.persistence.PersistenceException: Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))): oracle.toplink.essentials.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-02291: integrity constraint (ETRADE_4BM.FK_ECOMM_SCH_DET) violated - parent key not found
Thanks in advance
Anish

Hello,
I'm not sure what the FK_ECOMM_SCH_DET constraint refers to, but I assume it is to the only OneToOne reference defined. Based on the mappings shown, you have told TopLink that ECommSchema has a 1:1 to ECommSchemaDet, so that ECommSchemaDet has to be inserted first. My guess is your constraint is the oposite, requiring that ECommSchema be inserted before ECommSchemaDet. If so, just change the by directional 1:1 so that ECommSchema->ECommSchemaDet is mapped by the ECommSchemaDet->ECommSchema relationship (ie switch things).
Best Regards,
Chris

Problem with one computer: [RegTask] - Server rejected registration request: 3

Hi!
I having some problem with One of our clients, its mine :)
It does not register with the site
ClientIDManagerStartup.log:
MP_RegistrationManager.log
I have no idea why! I don't even use https and PKI. I have done a reinstalled the client by removing "C:\windows\SMSCFG.ini" and the SMS certificates before install but it still won't register. CCMSetup logs return successfull. Boundaries is setup
correctly.
I have also tried to uninstall ccmagent and readded the computer object in SCCM and installed it through client push but still the same problem.
I really don't want to reinstall the whole computer as I have already installed lots of applications i don't know if that will work anyway, could try to run a sysprep maybe.
Any ideas?
Thanks!

if that is the error you need to look at your IIS & Webdav & SQL Configurations... you can take some help from below blogs to troubleshoot this
http://anoopmannur.wordpress.com/2011/04/20/configmgr-sccm-2007-mpcontrol-log-shows-httpsendrequestsync-fails-with-status-code-500-internal-server-error/
http://www.windows-noob.com/forums/index.php?/topic/651-sccm-mp-issues/
http://windows7sux.blogspot.com/2009/04/sccm-smp-500-error.html
http://brothertu.blogspot.com/2010/07/how-to-quickly-test-to-see-if-sccm-mp.html
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/89c84077-f47c-427b-b73e-39478f34ebaf/
Thanks, Prabha G

WLC 2504 problems with one IP address range

Similar Messages

Maybe you are looking for