WLC + 3 x LAP Test environment equipment list recommendations....

I'm currently building a test environment in order to practice for CCNP Wireless as well as perform client demo's. I'm interested in the differences between the large controllers. Does the less expensive 2400 provide for a similar configuration to the 4400, or 5500 series? Also, I'm planning on getting 1142's to act as a Wireless Site Survey AP as well as setup a test environment to demonstrate roaming. Any advice would be welcome!
Regards,
Justin

+5 scott.
Besides what Scott said, if you want to proceed with studying cisco wireless after done with CCNP you may need two controllers one of them would be 2508 but the other should be larger controller that supports some advanced features that are not available in 2508 (anchor termination for example).
HTH
Amjad
Sent from Cisco Technical Support iPad App

Similar Messages

Office Web Apps Integration in a Test Environment

I am trying to test Office Web Apps in an Exchange 2013 test environment and therefore have setup my farm for HTTP only. I have set the WAC Discovery End Point on the Exchange server and I can browse to the XML successfully however when I preview files
they are still being displayed using Web-Ready Document Viewer. I have checked the Event Log and found event ids 140 and 141.
Event 141 lists the following error - There was a failure connecting to or otherwise retrieving Data from the Wac Discovery Service. We will fall back to stellent. Successfully retrieved configuration data from http://server01/hosting/discovery, but
retrieved discovery xml does not contain an external https net zone node.
Do I need to configure HTTPS with a certificate in order to get this working in a test environment or should it work with HTTP?
Thanks

Hi Luke,
Based on my research, I found some people solved this issue via resarting MBX server and CAS server on Exchange 2013 server.
Similar thread for your reference:
Exchange 2013 and Office Web Apps Server Integration
http://social.technet.microsoft.com/Forums/en-US/927a84db-cf54-4546-8b94-374c64eaac2d/exchange-2013-and-office-web-apps-server-integration?forum=exchangesvrgeneral
Please also double check whether there is anything missing during the integration. Offical articles for your reference:
Deploy Office Web Apps Server
http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx
Office Web Apps Server Integration
http://technet.microsoft.com/library/2591b1be-92c4-4192-9f5e-e4e6b319170a
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

AS3: No variables in testing environment

So one of the ways I work is to publish my swf into the
testing environment. If things are quite what I expect I often go
to the Debug menu and select "List Variables." Then I can see the
status of all my variables and often realize what is going on.
Try this with AS3.
Make a new AS3 FLA.
On the first frame put this.
var myVal:Number=10;
Publish and then List Variables.
Do you get anything other than:
Level #0:
Variable _level0.$version = "MAC 9,0,45,0"
That is all I ever see. Not so useful.
Was this just a bad habit to develop? Or is this something
missing from AS3?

I am sorry but List Variables is not supported for
ActionScript 3.
The Flash player has no way of identifying whether the movie
being tested is
ActionScript 1 and 2 where it is supported or ActionScript 3
where it is
not, so the feature still remains accessible for both even
though it will
only work for ActionScript 1 and 2.
"Rothrock" <[email protected]> wrote in
message
news:f221t4$rlv$[email protected]..
> So one of the ways I work is to publish my swf into the
testing
> environment. If
> things are quite what I expect I often go to the Debug
menu and select
> "List
> Variables." Then I can see the status of all my
variables and often
> realize
> what is going on.
>
> Try this with AS3.
>
> Make a new AS3 FLA.
> On the first frame put this.
> var myVal:Number=10;
> Publish and then List Variables.
>
> Do you get anything other than:
>
> Level #0:
> Variable _level0.$version = "MAC 9,0,45,0"
>
> That is all I ever see. Not so useful.
>
> Was this just a bad habit to develop? Or is this
something missing from
> AS3?
>

How to change parsing schema for using application in test environment?

Hi,
I set up a test environment, i.e. an other Oracle schema with identical tables, views etc. to the productive environment. I wanted to duplicate the APEX application so that there will be a test version using the test Oracle schema and productive version using the productive oracle schema.
Can some one please give me some tip how to do this? As far as I see i could change the parsing schema in the APEX Application install SQL in the following ways:
1. While exportin the application with APEX
2. In the result install f...sql file using search-replace
3. While importing the APEX application via APEX Development GUI.
I would prefere 1. or 3. but in both cases when I would like to change the schema name, the drop dowl list does not contain the test Oracle schema name. Do I have to grant something to the APEX worksspace schema for the test schema name to show up in the drop dowl list?
Tamás

On that screen,
- click Create
- select "Existing" Schema, click Next
- select the Workspace, click Next
- select the Schema, click Next
- click Add Schema
And now you'll end up with two schema's attached for the same Workspace.

Lync Server Mirror using SQL 2012 Developer Edition in Test Environment

I'm setting up a Lync Enterprise Frontend Pool in a Dev/Test environment using two SQL 2012 SP2 Developer Edition Servers. When I try and publish the topology and create the databases I am getting this error.
System.MissingMethodException: Method not found: 'System.String Microsoft.SqlServer.Management.Smo.ExceptionTemplatesImpl.BackupToUrlNotSupported
I have not been able to find any info on this error but it would appear the it has something to do with the fact these servers are developer edition. I was under the impression that developer edition included all features of the enterprise edition. Is that
not true? Has anyone else seen this error when it attempts to create the mirror?
Thanks
Dave
Dave Barker

Hi Dave,
Please refer to the official document, SQL 2012 SP2 Developer Edition is not listed in it.
Click on the following links for more information.
Database software support in Lync Server 2013
http://technet.microsoft.com/en-us/library/gg398990.aspx
Deploying SQL mirroring for Back End Server high availability in Lync Server 2013
http://technet.microsoft.com/en-us/library/jj204992.aspx
Best regards,
Eric

Need to refresh Test environment from Production

Hi All,
I need to refresh our Test environment from Production.
Can anyone help me with the list of special tools from different vendors to do it?
Any kind of help is appreciated.

Hi Manoj,
Thanks for your response. I am aware of the system copy.
can you help me with some tools from different vendors that can be an alternative to system copy.
we have categorized the task into 3 categories:
Database restore
Client Copy
Special tools
The third one includes tools from different vendors (for example: TDMS from SAP itself).

On maintaining test environment

Hi ,
I would liketo setup a test environment for DBA in my office .
Will there be any licensing cost for downloading Oracle from OTN for installing in my office test environment .
Let me put it like this .. if I want to say test the installation of Oracle 11g(Imagine I do not have a license for 11g) ..... Do i have to buy any license for that ....
When I mean test .. i just mean testing Installation ....
If I want to test for say another example .... like a 2 node rac on vmware server .. do i need license for that .. I know that it doesnt require license if its for my personal system .. however if its in my office do we require a license ?
Please provide me your valuable inputs ..
Regards
Renjith Madhavan

Asif Kabir,
Be very careful about making such statements. I wouldn't make such a statement on a forum.
Renjith,
You should check with the Oracle Sales person dealing with your organisation.
You can see some guidelines from
1. The Software Investment Guide and Price List at http://www.oracle.com/us/corporate/pricing/index.html
2. The Developer License at the download page at http://www.oracle.com/technetwork/indexes/downloads/index.html#database
See http://www.oracle.com/technetwork/indexes/downloads/index.html and
http://www.oracle.com/technetwork/testcontent/standard-license-088383.html (this is the current version -- it might change -- always check the latest version online).
However, you should also consult your Oracle Sales person. Licenses and quantities are negotiated.
Hemant K Chitale
Edited by: Hemant K Chitale on Jan 24, 2011 2:46 PM

Working in test environment. Need help with creating a notification subscription

I am pulling my hair out here. Whatever I have left. I am experimenting in my test environment. I am trying to create a notification subscription. Under criteria, when I select Support Group, I only have a choice of 3. Since my test is a copy of Prod, I
am confused here because in Prod, I have about 20 Support Groups to choose from. I found a List under Library --> Lists called Incident Tier Queue and the 3 Support Groups I see are in this list. Thing is, I can't edit the list. I get some kind of validation
error. What I would like to know is when you are creating a Subscription and you select Support Group in the Criteria, where is it looking or what List if any is it looking at to get that information and how would I change it?

if OOB when creating an email subscription the Support Group check box above points to the List Incident Tier Queue, how does one change that to point to the Service Request Support Group? There has to be a change somewhere else that allows it to point to
the customized list.
You can't change that. The Support Group property defined on the Incident class is an enumeration property that uses the IncidentTierQueue enumeration (list). This property's proper name is "TierQueue".
The Support Group property defined on the Service Request class is an enumeration property that uses the ServiceRequestSupportGroupEnum enumeration (list). This property's proper name is "SupportGroup".
Those two properties are unrelated.
You can't "point" an existing property to a different list. You can only modify the values in the list by adding values in an unsealed management pack.
If, in your production environment, you have a bunch of options in your Incident's "Support Group" property beyond Tier 1, Tier 2, and Tier 3, then somewhere in your production environment is an MP that contains those new properties. That MP happens
to be the "ServiceManager.IncidentManagement.Configuration" MP. The friendly name, in the management packs list, is "Service Manager Incident Management Configuration Library".
Now, as you say, if there are a bunch of list values in the Incident support group in your production environment, then you need to import that MP into your test environment. Then, when managing Incident criteria, you'll be able to choose from all of those
options.
Furthermore..let's say that your support groups are only defined in the ServiceRequestSupportGroupEnum..then you can't use them in your Incident criteria. Neither in your test nor your production environments. The IncidentTierQueue enum has to be updated
with any options you want to use during Incident subscription creation.
Lastly (if the above is true)..are you sure you want to create an Incident subscription and not a Service Request subscription?

Correct idea to scale out testing environment and test service pack2 installation

Hi
I have a sharepoint 2010 farm it has one sharepoint server, one database server
In one server below services are running
Central administration service
SharePoint Server Search
User Profile Service
Microsoft SharePoint Foundation Web Application
so i want to scale out this form to
1 application server
1 web front end server
1 Search server (index server)
1 databse server
here how i scale out to this form
1)here how i move sharepoint server search service to new index server and
2) here how i move Microsoft SharePoint Foundation Web Application to new webfront end server
and in this single server some web appllications are running also how i move these to new wf server
i want to do like this because i want to test service pack 2 installation, now sharepoint version is : service pack1
my actual production environment has
2 application servers
2 webfront end servers
2 index servers
1 databae server
so this correct idea to scale out testing environment and test service pack2 installation
adil

Hi Adil,
The link below describes how to scale SharePoint Web Front-End with only web applications and the search query server out of one SharePoint server with all roles running.
http://sharepointsolutions.com/sharepoint-help/blog/2011/02/how-to-scale-out-a-sharepoint-2010-farm-from-two-tier-to-three-tier-by-adding-a-dedicated-application-server/
Now you have two SharePoint server with:
Tier 1 – SharePoint Server dedicated as a Web Front-End (WFE) with only the web application(s) and the search query service running on it
Tier 2 – SharePoint Server dedicated as an Application Server with all of the other service applications running on it, but no web applications or query service
Tier 3 – SQL Server for the databases
Then you would scale out WFE server with web applications from tier1. Now please install a new SharePoint server and join it to the existing farm and deploy it as Web Front Server. Enable the relevant services on Web Front servers per the topology picture
below, and stop the services running on the old server.
http://technet.microsoft.com/en-us/library/cc263044(v=office.14).aspx
Regards
Rebecca Tu
TechNet Community Support

Workbook won't open after import into test environment - Function Related

Hi Experts,
We have a disco report that uses a custom database function. The function has been registered and is valid in the development environment and the report works fine.
We have exported the business area, report and relevant functions from the development environment and imported them into the test environment (Using diso admin import/export tool) in the following order:
1. Functions
2. Business Area
3. Workbook
There were no errors during the import with the exception of a failed grant which was my logon and does not exist in the target environment.
When I attempt to open the workbook in the test environment I receive the following error message: Item dependancy"" not found in the EUL. Attempt to open workbook failed.
At first I though that this was a folder developer key issue because I did have to change the id of a folder that this report uses however I have re-synced the ID's by ensuring the eul id's were different and I have decompiled the workbook using the d51wkdmp tool and I have confirmed that the workbook is looking at the correct items.
I noticed that the workbook had three function references so in the development environment I deleted the fields that used the functions and re-imported the workbook, guess what it worked OK meaning that the folder ID's etc... are ok and all in sync.
I attempted to create a new workbook in the test environment that used the imported function. When I did I got an error message saying that there was too many parameters for the function, exactly the same process works in the development environment and the calculation creates ok. I checked the function definition in discover administrator (test environment) and the function is correct, parameters present and validates OK exactly the same as the dev environment however when I try to use it discoverer plus falls over!!!!
Any ideas/pointers, at the moment I can't see how this can be anything except a bug in the import utility as the function is OK in Development and doesnt work in Test, we have used the standard export/import tools.
Thanks
Keith

Hi Rod,
This error is occuring with functions that only have 2 or 3 parameters. My standard install processes do use the refresh option.
I have been following this up with Oracle Support and they have managed to replicate the bug in there environment. It has something to do with optional parameters, when you change all the parameters to required it works ok however I have other functions that have optional parameters that do work ok so it is clearly not just the presence of optional parameters that is causing the problem.
This is the first time (and probably the last) that I have tried to do disco migration using the admin import tool I have always used the command line interface to automate installs in the past, as I havn't run into this before I would imagine the bug is not present in the command line tool.
I will post an update when I hear back from Oracle Development on a fix.
Keith

In app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.

in app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.
What i did
1 . Added three products more to the existing in-app
2 . Tested with sanbox
i am getting the error "cannot connect to itunes store" with error code "0" when trying to purchase product in sandbox.
Is sandbox is down?Please help guys..

Apple's sandbox has been down practically all month. You can check the status here:
http://sandbox.itunes.apple.com

Issue with External Form Repost in Testing Environment

Please help!
We are attempting to add an Eloqua repost to our webform on https://www.2checkout.com/signup. We are a payment processor and therefore, our customer admin area, of which this page is a part, must maintain various compliance standards. With this in mind, we are testing the repost in our test environment, which sits on https://va.test.2checkout.com. I've double-checked and our eloqua tracking scripts are picking up these pages.
When we run the repost, the line of code to get the GUID -
elqQ.push(['elqGetCustomerGUID']);
is erroring. I've attached a screenshot.
For reference, we're using the code illustrated in Thomas Reyto's Topliner's post: http://topliners.eloqua.com/community/do_it/blog/2012/04/17/how-to-repost-an-externally-hosted-form-to-eloqua.
Any assistance in determining the issue would be most appreciated! As mentioned, we really want to get this working in the test environment before we push it live, as it could break our sign up process otherwise.
Thank you Topliners!

Jennifer Comisford the JavaScript snippet to include elqcfg.min.js on your page? The waituntilCustomerGuidIsRetrieved function is defined in the elqcfg.min.js tracking script. From the error it looks like your page has not loaded the file correctly.
<script type="text/javascript">
    var _elqQ = _elqQ || [];
    _elqQ.push(['elqSetSiteId', '#########']);
    _elqQ.push(['elqTrackPageView']);
    (function () {
        function async_load() {
            var s = document.createElement('script'); s.type = 'text/javascript'; s.async = true;
            s.src = '//img.en25.com/i/elqCfg.min.js';
            var x = document.getElementsByTagName('script')[0]; x.parentNode.insertBefore(s, x);
        if (window.addEventListener) window.addEventListener('DOMContentLoaded', async_load, false);
        else if (window.attachEvent) window.attachEvent('onload', async_load);
</script>

SSRS 2012 Subscription Error in Test Environment

Hi All,
I was trying to set-up Email Subscription for SSRS in my Test Environment using "Reporting Services Configuration Manager" and after providing SMTP server details. I was getting error "Failed to sent Email to [email protected]"
What could be the reason?
I tried pining SMTP IP address from the Machine where SSRS installed and I was able to ping SMTP Server using CMD ping command.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi All,
I found the issue. The IP address of Machine, where SSRS server installed, was not included in to the SMTP relay and that's why I was getting error "Failed
to sent Email to [email protected]".
Once my network team, added IP address, it started working fine.
Another thing I noticed, due to some reason SQL Server Agent was stopped and was not running and one
of my colleagues was trying to create new subscription and was getting error 'The SQL Agent service is not running. This operation requires the SQL Agent service. (rsSchedulerNotResponding)'.
Once I started SQL Server Agent, My colleague was able to create new subscription.
Thanks Shiven:) If Answer is Helpful, Please Vote

Use of DataGuard in a testing environement

Hi all,
whenever an incident occurs on our production system, we import a dump from our production database into our test database to reproduce the incident and to find a solution for the issue.
Taking a dump and import this into a test database takes several hours.
Now I'm thinking about a solution using DataGuard to speed up this scenario. It is quiet important for us to solve production incidents as soon as possible (banking environement).
So I think about the following:
DB PROD => master
DB TEST1 => standby
When an incident occurs I want to
- remove DB TEST1 from DataGuard and use this DB as an independent DB where we can reproduce the incident.
- add a new stand by to DataGuard to have a test DB for the next incidents
Does anyone use DataGuard in the same manner or does anyone can tell me if this would be a possible way?
Many thanks in advance fpr your support.
Andreas

Its a thought, but its not the best use of Data Guard (in my humble opinion). When I think Data Guard I think:
Recovery Plan
Read-only services
Minimize downtime
You are looking for a quick way to refresh your test environment and I believe RMAN Duplicate might be a better answer. You can have everything setup in advance just like Data Guard.
If you do decide to use Data Guard for this sooner or later you will probably trash your standby setup and have to use RMAN Duplicate to fix it.
However if your database is really huge it might be a great idea to have the standby the way you say with a short delay on apply on the standby end.
Best Regards
mseberg

Best practice for the test environment & DBA plan Activities Documents

Dears,,
In our company, we made sizing for hardware.
we have Three environments ( Test/Development , Training , Production ).
But, the test environment servers less than Production environment servers.
My question is:
How to make the best practice for the test environment?
( Is there any recommendations from Oracle related to this , any PDF files help me ............ )
Also please , Can I have a detail document regarding the DBA plan activities?
I appreciate your help and advise
Thanks
Edited by: user4520487 on Mar 3, 2009 11:08 PM

Follow your build document for the same steps you used to build production.
You should know where all your code is. You can use the deployment manager to export your configurations. Export customized files from MDS. Just follow the process again, and you will have a clean instance not containing production data.
It only takes a lot of time if your client is lacking documentation or if you re not familiar with all the parts of the environment. What's 2-3 hours compared to all the issues you will run into if you copy databases or import/export schemas?
-Kevin

WLC + 3 x LAP Test environment equipment list recommendations....

Similar Messages

Maybe you are looking for