Wlc 4400 series web server

Hi All,
Does anybody know what software do they use for web server ? Is it something like Apache or something else ?
Thanks
Pawel

Its just a basic ssl certificate. You need to convert it to a pem in order to upload it to the WLC. Here is a doc that I use. You can use Apache or Microsoft, as it doesn't matter since you need to convert it.
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080a77592.shtml
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Similar Messages

WLC 4400 series OID for Current Clients

Can someone advise what is the OID for the number of current clients for the WLC 4400 series appliance.
Thanks.

Based on the results of your walk, I would say it's reports all of the instances on that particular controller...and I say this because only one instance is reported. I would think that if you have multiple WLANS on that WLC, you would get multiple instances reported back, so, (maybe, like you) I'm confused by the description in the MIB object where it states:
"No of Mobile Stations currently associated with the WLAN."
which to me looks like "the WLAN" is used in the singular.
At this point, I think the best thing to do would be to open a TAC case with all of this info, and we can get with our developers for confirmation.
Hope this has been somewhat helpful, and please rate these posts.
Thanks,
-Joe

IDS feature on WLC 4400 series

Hi Everyone,
I'd like to ask about the IDS feature on WLC 4400 series.
What will the WLC do if it detects an attack specified in the Standard IDS signature ? Will the WLC shutdown the client or just report it ?
Thank you

The intrusion-detection-system (IDS) signature engine on controllers and on the Cisco WCS automatically eliminates duplicate alerts for rogue access points, rogue clients, and IDS signatures that previously occurred when two or more access points detected the same attacker. Now instead of one IDS alert from each detecting access point, a single alert is generated for the attack.
Intrusion detection, location, and containment preserve the integrity of wireless networks and sensitive corporate information. When an associated client sends malicious traffic, a Cisco wired IDS device detects the attack and sends shun requests to Cisco Wireless LAN Controllers, which then disassociate the client device.

Troubleshoot Cisco Airlap 1242 with WLC 4400 Series LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response

I have a Problem with my new AIRLAP 1242 to connect with WLC 4400
after debug in my airlap it shows :
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8"...######################################################################################################################################################################################################################################
File "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 19-Mar-07 01:42 by hqluong
Image text-base: 0x00003000, data-base: 0x004051E0
Initializing flashfs...
flashfs[1]: 9 files, 3 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 5062144
flashfs[1]: Bytes available: 10936832
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1242AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCW1411U0FZ
PowerPCElvis CPU at 266Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 68:EF:BD:5F:9A:18
Part Number                          : 73-10256-07
PCA Assembly Number                  : 800-26918-06
PCA Revision Number                  : A0
PCB Serial Number                    : FOC14093XU3
Top Assembly Part Number             : 800-29152-03
Top Assembly Serial Number           : FCW1411U0FZ
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1242AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:05.608: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:06.858: %DOT11-2-VERSION_INVALID: Interface Dot11Radio0, unable to find required radio version 581.18
*Mar 1 00:00:06.858: Interface Dot11Radio0, Accepting as a test version of radio firmware
*Mar 1 00:00:06.878: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:07.234: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:08.212: %DOT11-2-VERSION_INVALID: Interface Dot11Radio1, unable to find required radio version 581.18
*Mar 1 00:00:08.212: Interface Dot11Radio1, Accepting as a test version of radio firmware
*Mar 1 00:00:08.232: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.278: %SYS-6-LOGGERSTART: Logger process started
*Mar 1 00:00:09.326: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 19-Mar-07 01:42 by hqluong
*Mar 1 00:00:09.332: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Mar 1 00:00:09.388: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 32 seconds
*Mar 1 00:00:10.271: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:11.271: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:28.331: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:28.361: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2462 selected
*Mar 1 00:00:28.362: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:00:28.363: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:28.369: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5260 selected
*Mar 1 00:00:28.372: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:28.398: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:28.399: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:28.465: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:29.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:29.465: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Translating "CISCO-LWAPP-CONTROLLER.ekahospital.com"...domain server (202.134.0.155)
*Mar 1 00:00:38.351: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.31.xxx.xxx, mask 255.255.255.0, hostname AP68ef.bd5f.9a18
*Mar 1 00:00:38.820: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2417 selected
*Mar 1 00:00:38.827: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5200 selected (203.130.196.5)
*Mar 1 00:00:49.835: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2422 selected
*Mar 1 00:00:49.842: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5220 selected
*Mar 1 00:00:49.851: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Mar 1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Sep 18 07:02:25.504: %LWAPP-5-CHANGED: LWAPP changed state to CFG
*Sep 18 07:02:29.288: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER.MYDOMAIN.com
*Sep 18 07:02:30.504: LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response
*Sep 18 07:02:30.551: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE.
*Sep 18 07:02:30.551: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
flashfs[0]: 9 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 5062144
flashfs[0]: Bytes available: 10936832
flashfs[0]: flashfs fsck took 26 seconds.
Base ethernet MAC Address: 68:ef:bd:5f:9a:18
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
and after that i check in my WLC that shows
AP with Base Radio MAC xx:xx:xx:xx:xx:xx (APxxxx.xxxx.xxxx) is unable to associate.
The reulatory domain configured on it '-e' does not match the controller's country
code: USA
i found that the problem about the region.
question :
1. is it possible to change the region in AIRLAP 1242 or in WLC?
2. if possible how to change it?
INFO :
my first AIRLAP Product/Model Number : AIR-LAP1242AG-A-K9 and my new AIRLAP Product/Model Number : AIR-LAP1242AG-E-K9

WLC GUI >> Wireless >> Country >> Select the country.
Regards
Surendra

Differences Between WLC 2000 and 4400 series

Besides the supported number of access points, what are the differences in features between the WLC 2000 and 4400 series?

On the 2006, you have 4 ports on the back, that can support up to 3 AP's being directly connected, and the other port as your connection to the network, and it does not support LAG (Link AGgregation). The ports are 10/100M, and it can not be an anchor for a mobility group.
On the 4400, you either have a 4402 or a 4404,the 2 has 2 Gig interfaces, and the 4404 has 4 Gig interfaces, you can not connect AP's directly to a 4400. Both 4400's will support LAG, and they can be used as anchors in a mobility group. Those are the big differences in them. They configure up the same, and interact with the wired and wireless networks the same.

Prerequisiteinstaller.exe error - unable to install Application Server Role, Web Server (IIS) Role

Windows Server 2012 R2 running on Hyper-V VM. File services, App server & IIS roles installed
SQL Server 2012 installed
Tried:
kb 2765260 method 1 which is kb 2771431 which ends with "not applicable to computer"
kb 2765260 method 2 with no effect (this was power shell commands for PC's connected to the internet)
One post suggested "aspnet_regii - enable -i" but my OS doesn't have aspnet_regii on it (not sure what that implies)
One post suggested ServerManagerCmd.exe needed to be installed which sounds true as shown below (but where do I find this exe?)
There are some errors in the log file, I only included the portions where the errors are listed. The initial lines are at the top of the log file, then I skipped to the section where the other errors were. I can include the whole log if
it becomes necessary.
9:47:11 Processor architecture is (9)
9:47:11 Reading the following string value/name...
9:47:11 Common Startup
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
9:47:11 The value is...
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
9:47:11 Trying to remove the startup task if there is any.
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
9:47:11 Error: Startup task doesn't exist. This is not a continuation after a restart.
9:47:11 Locating the following command line arguments file:
9:47:11 E:\PrerequisiteInstaller.Arguments.txt
9:47:11 Error: This file does not exist
9:47:11 Details of the current operating system:
9:47:11 Check whether the following prerequisite is installed:
9:47:11 Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
9:47:11 Reading the following DWORD value/name...
9:47:11 IsInstalled
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
9:47:17 Beginning download/installation
9:47:17 Created thread for installer
9:47:17 "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\PreE0DB.tmp.XML"
9:47:17 Error: Unable to install (2)
9:47:17 Error: [In HRESULT format] (-2147024894)
9:47:17 Last return code (2)
9:47:17 Reading the following DWORD value/name...
9:47:17 Flags
9:47:17 from the following registry location...
9:47:17 SOFTWARE\Microsoft\Updates\UpdateExeVolatile
9:47:17 Reading the following string value/name...
9:47:17 PendingFileRenameOperations
9:47:17 from the following registry location...
9:47:17 SYSTEM\CurrentControlSet\Control\Session Manager
9:47:17 Reading the following registry location...
9:47:17 SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
9:47:17 Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
9:47:17 Last return code (2)
9:47:17 Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
9:47:17 Cannot retry
I'm presuming the first 2 errors are OK and just indicate optional startup modes for prerequisiteinstaller.exe
The 2nd set of errors seems more serious. I don't see ServerManagerCmd.exe on my PC that's listed in the error
I don't understand the last error which I'm supposing triggered the listed error even though there are other errors in the log.
Many of the existing posts don't match the configuration I'm using, and the ones that do match didn't seem to provide a usable answer. Any help is appreciated. Do these problems exist using Sever 2012 Standard? I will try that, but would
like to resolve the issue here with R2.
Thanks.
Best Regards,
Alan

ServerManagerCMD.exe is a deprecated utility and (as far as I know) is only found on Server 2008 versions, so I'm surprised it's needed for the preinstaller. Are you trying to install SharePoint 2010?
Running this page through Google Translate should give you an clearer idea on getting this installed.
http://blog.hand-net.com/sharepoint/2010-06-10-error-lors-de-linstallation-des-office-web-apps-2010-sur-windows-7.htm
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

I am using the "G Web Server" with Bridgeview 2.1. The problem I am having is that I have to

restart the web server once every 2 to 3 days, or the web pages don't show the vi (images). Any ideas to trouble shoot - I dont know if the problem is related to my workstation hardware or a setting that needs to be tweaked on the G Web Server. Thank you.I am using a Pentium 233 machine/ Win 95. The PLC I am collecting info from is a GE Fanuc Series 9030 (?). Ethernet connection.

restart the web server once every 2 to 3 days, or the web pages don't show the vi (images). Any ideas to trouble shoot - I dont know if the problem is related to my workstation hardware or a setting that needs to be tweaked on the G Web Server. Thank you.Hi,
we are using the G Web Server with LabVIEW on a WinNT 4 machine. Up to now these works fine. Therefore I would recommend you to choose a more stable OS.
Maybe you can try to programmatically restart the server every 2 days. Within LabVIEW you would do this by running "HTTP Server Control.vi". Unfortunatly all connections will be closed, thus be aware of that!
Hope that helps
chris

Problems Installing PS 6.2 with S1 Web Server 6.1 ?

Im trying to install PS 6.2 (beta) against S1 Web Serer 6.1 and having all these problems during web server startup. Installation of both Portal 6.2 / Identity 6.1 went on fine without any trouble. Below is the exception. Has anybody faced this exception before.
Any help .....
# ./start
CORE1116: Sun ONE Web Server 6.1 B06/19/2003 18:34
info: CORE3016: daemon is running as super-user
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.1_05] from [Sun M
icrosystems Inc.]
info: WEB0100: Loading web module in virtual server [https-portal2.sundemo.isdin
tegration.com] at [amconsole]
warning: WEB6100: locale-charset-info is deprecated, please use parameter-encodi
ng
info: WEB0100: Loading web module in virtual server [https-portal2.sundemo.isdin
tegration.com] at [ampassword]
warning: WEB6100: locale-charset-info is deprecated, please use parameter-encodi
ng
info: WEB0100: Loading web module in virtual server [https-portal2.sundemo.isdin
tegration.com] at [amcommon]
info: WEB0100: Loading web module in virtual server [https-portal2.sundemo.isdin
tegration.com] at [amserver]
warning: WEB6100: locale-charset-info is deprecated, please use parameter-encodi
ng
info: WEB0100: Loading web module in virtual server [https-portal2.sundemo.isdin
tegration.com] at [portletsamples]
info: WEB0100: Loading web module in virtual server [https-portal2.sundemo.isdin
tegration.com] at [portal]
warning: WEB6100: locale-charset-info is deprecated, please use parameter-encodi
ng
info: WEB0100: Loading web module in virtual server [https-portal2.sundemo.isdin
tegration.com] at [search]
failure: WebModule[portal]: WEB2683: Exception sending context initialized even
t to listener instance of class com.sun.portal.common.logging.impl.LoggerServlet
ContextListenerImpl
java.lang.RuntimeException: LoggerImpl.init() - Could nit initialize Log file, a
ccess denied (java.lang.RuntimePermission writeFileDescriptor)
at com.sun.portal.common.logging.impl.LoggerImpl.init(LoggerImpl.java:87
at com.sun.portal.common.logging.impl.LoggerServletContextListenerImpl.c
ontextInitialized(LoggerServletContextListenerImpl.java:101)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3360)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3
716)
at com.iplanet.ias.web.WebModule.start(WebModule.java:203)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355
at org.apache.catalina.startup.Embedded.start(Embedded.java:979)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:410)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:505)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
failure: WebModule[portal]: WEB2683: Exception sending context initialized even
t to listener instance of class com.sun.portal.container.portlet.impl.Preference
ManagerContextListenerImpl
java.lang.NullPointerException
at com.sun.portal.container.portlet.impl.PreferenceManagerContextListene
rImpl.contextInitialized(PreferenceManagerContextListenerImpl.java:33)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3360)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3
716)
at com.iplanet.ias.web.WebModule.start(WebModule.java:203)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355
at org.apache.catalina.startup.Embedded.start(Embedded.java:979)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:410)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:505)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
failure: WebModule[portal]: WEB2683: Exception sending context initialized even
t to listener instance of class com.sun.portal.container.portlet.impl.PortletCon
tainerContextListenerImpl
java.lang.NullPointerException
at com.sun.portal.container.portlet.impl.PortletContainerContextListener
Impl.contextInitialized(PortletContainerContextListenerImpl.java:35)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3360)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3
716)
at com.iplanet.ias.web.WebModule.start(WebModule.java:203)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355
at org.apache.catalina.startup.Embedded.start(Embedded.java:979)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:410)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:505)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
failure: WebModule[portal]: WEB2705: Context startup failed due to previous err
ors
warning: WEB7102: Error while binding global resources for WebModule [portal]
warning: WEB7103: Exception while binding global resources:
java.lang.NullPointerException
at java.util.Hashtable.get(Hashtable.java:329)
at org.apache.naming.ContextBindings.getClassLoader(ContextBindings.java
:348)
at com.iplanet.ias.web.WebModule.bindGlobalResourceRefs(WebModule.java:2
54)
at com.iplanet.ias.web.WebModule.start(WebModule.java:206)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355
at org.apache.catalina.startup.Embedded.start(Embedded.java:979)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:410)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:505)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
failure: WebModule[portletsamples]: WEB2683: Exception sending context initiali
zed event to listener instance of class com.sun.portal.common.logging.impl.Logge
rServletContextListenerImpl
java.lang.RuntimeException: LoggerImpl.init() - Could nit initialize Log file, a
ccess denied (java.lang.RuntimePermission writeFileDescriptor)
at com.sun.portal.common.logging.impl.LoggerImpl.init(LoggerImpl.java:87
at com.sun.portal.common.logging.impl.LoggerServletContextListenerImpl.c
ontextInitialized(LoggerServletContextListenerImpl.java:101)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3360)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3
716)
at com.iplanet.ias.web.WebModule.start(WebModule.java:203)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355
at org.apache.catalina.startup.Embedded.start(Embedded.java:979)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:410)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:505)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
failure: WebModule[portletsamples]: WEB2683: Exception sending context initiali
zed event to listener instance of class com.sun.portal.portletappengine.impl.Lif
ecycleManagerContextListenerImpl
java.lang.NullPointerException
at com.sun.portal.portletcontainercommon.descriptor.DeploymentDescriptor
Reader.<init>(DeploymentDescriptorReader.java:61)
at com.sun.portal.portletappengine.impl.LifecycleManagerImpl.initDeploym
entDescriptor(LifecycleManagerImpl.java:138)
at com.sun.portal.portletappengine.impl.LifecycleManagerImpl.init(Lifecy
cleManagerImpl.java:97)
at com.sun.portal.portletappengine.impl.LifecycleManagerContextListenerI
mpl.contextInitialized(LifecycleManagerContextListenerImpl.java:13)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3360)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3
716)
at com.iplanet.ias.web.WebModule.start(WebModule.java:203)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355
at org.apache.catalina.startup.Embedded.start(Embedded.java:979)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:410)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:505)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
failure: WebModule[portletsamples]: WEB2683: Exception sending context initiali
zed event to listener instance of class com.sun.portal.portletappengine.impl.Req
uestResponseFactoryContextListenerImpl
java.lang.NullPointerException
at com.sun.portal.portletappengine.impl.RequestResponseFactoryImpl.init(
RequestResponseFactoryImpl.java:115)
at com.sun.portal.portletappengine.impl.RequestResponseFactoryContextLis
tenerImpl.contextInitialized(RequestResponseFactoryContextListenerImpl.java:16)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3360)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3
716)
at com.iplanet.ias.web.WebModule.start(WebModule.java:203)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355
at org.apache.catalina.startup.Embedded.start(Embedded.java:979)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:410)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:505)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
failure: WebModule[portletsamples]: WEB2705: Context startup failed due to prev
ious errors
warning: WEB7102: Error while binding global resources for WebModule [/portletsa
mples]
warning: WEB7103: Exception while binding global resources:
java.lang.NullPointerException
at java.util.Hashtable.get(Hashtable.java:329)
at org.apache.naming.ContextBindings.getClassLoader(ContextBindings.java
:348)
at com.iplanet.ias.web.WebModule.bindGlobalResourceRefs(WebModule.java:2
54)
at com.iplanet.ias.web.WebModule.start(WebModule.java:206)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355
at org.apache.catalina.startup.Embedded.start(Embedded.java:979)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:410)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:505)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
info: HTTP3072: [LS ls1] ready to
accept requests
startup: server started successfully
#

Since my company is a partner to Sun, we have access to beta site for downloads. Due to internal restrictions I may not be able to share that info. with you. Sorry.
Sunil.

How do you get Sun One Web Server to read white spacing in a url

Hi guys,
I am currently using Sun One Web Server and this is the problem that i am currently facing.
The url which is i am trying to read from the Sun One Web Server is http://test:8000/test/Testing%20A%20B
The error which i am getting is java.lang.RuntimeException: java.net.URISyntaxException: Illegal character in path
The reason why this is happening is because the original url is http://test:8000/test/Testing A B It has spacing in between the url. I cannot get rid of the spacing thru the code where its bound to a Content Management System. So the only way is to get the Sun One Web Server to be able to read this kind of url. There are about 300 to 400 of this types of url as they are dynamically generated.
I was looking at the obj.conf and magnum.conf file to see whether i can manipulate this url to work for this situation. But with no luck.
Can anyone please let me know if they have came across this problem.
Thanks.

Hi,
This is the stack Trace:
Error 500--Internal Server Error
java.lang.RuntimeException: java.net.URISyntaxException: Illegal character in path at index 29: /models/Sportwagon/Sportwagon SS V-Series
     at au.com.holden.cs.assembler.FriendlyURLAssembler.getInputURI(FriendlyURLAssembler.java:329)
     at au.com.holden.web.mvc.ViewUtil.getInputModelAndView(ViewUtil.java:29)
     at au.com.holden.web.mvc.navigation.ModelNavigationController.handleNoSuchRequestHandlingMethod(ModelNavigationController.java:17)
     at org.springframework.web.servlet.mvc.multiaction.MultiActionController.handleRequestInternal(MultiActionController.java:375)
     at org.springframework.web.servlet.mvc.AbstractController.handleRequest(AbstractController.java:153)
     at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:45)
     at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:820)
     at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:755)
     at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:396)
     at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:350)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.net.URISyntaxException: Illegal character in path at index 29: /models/Sportwagon/Sportwagon SS V-Series
     at java.net.URI$Parser.fail(URI.java:2809)
     at java.net.URI$Parser.checkChars(URI.java:2982)
     at java.net.URI$Parser.parseHierarchical(URI.java:3066)
     at java.net.URI$Parser.parse(URI.java:3024)
     at java.net.URI.(URI.java:578)
     at au.com.holden.cs.assembler.FriendlyURLAssembler.getInputURI(FriendlyURLAssembler.java:326)
     ... 26 more
This is the path which was access by me using Sun One Web Server: http://poll:8006/models/Sportwagon/Sportwagon%20SS%20V-Series
As you can see that Sun One Web Server dont like spacing between url.
Does anyone know how to fix this problem thru configuration in Sun One Web Server?

Web server in front of WebAS

Hi,
We are using EP6.0 on WebAS 6.40 (on Solaris).
Due to some security reasons, we do not want to expose our portal server to web. Instead we want to have one seperate web server (Apache web server) to sit in front of the portal server. This web server will take direct user requests and will forward them to the portal server.
Has anyone worked on something of this kind?
Any help is highly appreciated.
Thanks,
Chandra

Hi,
What you need is a reverse proxy. Check web logs like:
/people/sap.user72/blog/2005/02/16/the-reverse-proxy-series--part-1-introduction
/people/sap.user72/blog/2005/02/23/the-reverse-proxy-series--part-2-iis-as-a-reverse-proxy
/people/yasin.rahim/blog/2005/01/27/reverse-proxy-in-a-load-balanced-environment
or documentation like
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/051ba890-0201-0010-a693-98348abcafa9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/32ad9b90-0201-0010-3c8a-c900cd685f8f
Eddy

Report Web Server

Hi,
I downloaded the Oracle by Example series for the latest verison of 9i (enterprise) on Windows 2000. I installed oracle OK and then created a Management Server repository on the same machine, but in a different database (as the doc's say to do).
The next thing it has you do is to try to set up a report server and it has you do the following steps:
1. Log into the oracle management server and edit the REPORTS_USER user's password.
2. Configure the Web Server for Enterprise Manager Reporting by starting the HTTP Server (Start -> Programs -> Oracle - OraHome92 -> Oracle HTTP Server -> Start Oracle HTTP Server powered by Apache)
This open a dos command window, which basically states the apache server is running
3. Open up a command prompt and enter "oemctl configure rws" and accept the defaults except for the password of REPORTS_USER (enter the password from step 1). I did this and it came back saying everything was successful. It then states to use your browser and goto //computername:3339
I go to that location and select the ACCESS button and I get this error message (doncaster is the name of my computer which has the oracle db and the oracle manager server installed):
"The management server doncaster is using a different webserver doncaster for Enterprise Manager reporting services. This webserver Doncaster will be deconfigured and will no longer support Enterprise Manager Reporting. To access Enterprise Manager Reports in the future, please use the webserver doncaster"
Any body have any ideas where I'm going wrong ? It seems to suggest using the server I'm already using..
Some other info that might be useful:
1. When viewing the http server in Oracle Management Server it lists the server as Doncaster:4443
The number beside the computer name is the port number, however when using the "oemctl" to configure RWS the default shows port 3339
2. There is a service running on the machine called "OracleOraHome92HTTPServer" which doesn't seem to have anything to do with the Appache server. I can stop/start the HTTP server in Oracle Mangement Server and it has no affect on this service...
Any help would be greatly appreciated.
Regards,
Ned Radenovic

I used URL: http://172.16.8.182/ReportServer (report builder 2008 2.0RC), but I still got the error message:connection failed.
I don't know why, because i can access report manager using http://172.16.8.182/ReportServer in IE.

Web Server Authentication

I have created a website running on a web server that I want those trying to access our wireless network to log in to. I have the Wireless Access Controller redirecting to my website, but I don't know how to get the website to forward the information back to the controller so that it authenticates the user. It doesn't have to forward their specific username and password. I have created a 'guest' username and password on the controller, so all the site has to do is forward "username=guest" and "password=whatever" to the controller. I have written the site in ASP.net, any help will be greatly appreciated!

This document explains how to use an external web server in order to set up a wireless LAN controller (WLC) for web authentication.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076f974.shtml

Migrating AP's from WLC 4400 v.4.0.179.11 to WLC 5508 v.7.2.110.0

Hi,
I am replacing an old 4400 series WLC running version 4.0.179.11 to a new 5508 WLC running version 7.2.110.0.
We currently have 70 x 1131 Access points on the 4400 WLC.
With this upgrade, do i need to upgrade the old 4400 to version 6.0 so the AP's get an up to date IOS or can i directly migrate all AP's over to the new 5508 without any version incompatabilities on the AP's?
I am abit worried that the AP's are running a very old IOS on the 4400 v.4.0.179.11 to go straight to the new 5508 v.7.2.110.0.
Thanks

Hi,
Check out this release note
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2_110_0.html#wp976667
You'll need to get up to a supported version of 6.0 first as per the release notes.
You'll need to check out the 6.0 release notes too to make sure there are no other intermediate upgrade steps required too.
Nigel
Sent from Cisco Technical Support iPad App

Starting/Stopping Web Server

I am using WebSrvr.Active in my vi to start the web server but when I stop the web server the browser continues to display the front panel. It seems that the setting WebSrvr.Active to false does not stop the server.
Is there a way to check if the server has stopped? Is there a way to disconnect or stop the remote monitoring pragmatically?

According to this KB, the Websrvr.active should stop the server. It also metnoins that only the local machine can access this. I am curious though, does the computer you are accessing the web server with still show updating data even after you have called this property? If so, if you try and refresh the page, does it still stay loaded?
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

Sun one web server 6.0 sp9. Crash occurred in function JVM_NewArray or JVM_

We have a web page with 2 frame set (fa, and fb)
fb has a table with a cell containing div of another table xx.
We face the case where the result in the table xx is not completely displayed due to server crash.
Each time this page is serviced the server crash with the following exception in server was shown from the errors log:
Server crash detected (signal SIGBUS)
Crash occurred in function JVM_FillInStackTrace from module /usr/j2se/jre/lib/sparc/client/libjvm.so
Occasionally the server crash with the following exception:
Server crash detected (signal SIGSEGV)
Crash occurred in function JVM_NewArray from module /usr/j2se/jre/lib/sparc/client/libjvm.so
We were not able to simulate this problem in another instance in �dev� box.
We were also not able to simulate this problem in another instance in same �final� box.
The following was googled for JVM_NewArray :
bug id : 4839641 <http://developer.java.sun.com/developer/bugParade/bugs/4839641.html>
bug id : 4720694 <http://developer.java.sun.com/developer/bugParade/bugs/4720694.html>
The web service is in �final� box using the following:
- Sun one web server 6.0 sp9.
-SunFire 880
-OS: Solaris 9
- Using the Java HotSpot(TM) Client VM v1.4.1_01a from Sun Microsystems Inc.
-JSP
-Java
Would this problem we are facing be a sunone server issue or JVM issue?
Or would there be other issues?

It sure sounds like a JVM bug. I think you should try
using either a) the JVM shipped with Web Server 6.0
SPx (as this is the JVM version that's received the
most testing with Web Server 6.0 SPx) or b) the
latest 1.4-series JVM (as this will include bug fixes
made since 1.4.1_01a).Thanks for the prompt reply.
Would have to upgrade the JVM then.
Will get back again if the upgrade of the JVM solves this issue.

Wlc 4400 series web server

Similar Messages

Maybe you are looking for