WLC 4400: User Account must not expire

Hi all.
Currently we have wireless guest user accounts added onto the wlc and they expire in 30days. No problem with this.
However, the wireless infrastructure is to be used by internal employees with local account db held on wlc. Can this be setup such that their account will never expire?
thanks a lot
Ajaz

Hi Ajaz,
Most possible my friend
Local Net Users
You can change a guest user account with a non-zero lifetime to another lifetime value at any
time while the account is active. However, to make a guest user account permanent using the
controller GUI, you must delete the account and create it again. If desired, you can use the config
netuser lifetime user_name 0 CLI command to make a guest user account permanent without
deleting and recreating it.
From the Lifetime drop-down boxes, choose the amount of time (in days, hours, minutes, and seconds)
that this guest user account is to remain active. A value of zero (0) for all four fields creates a permanent
account.
http://www.cisco.com/en/US/docs/wireless/controller/5.2/configuration/guide/c52users.pdf
Cheers!
Rob
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com/docs/DOC-8727

Similar Messages

UME User account password never expires

Is there a user type in the UME on java where the user account will not expire? Much like the service user type on ABAP.
Thanks Mikie

Mike,
This is actually what you are looking for:
http://help.sap.com/saphelp_nw04s/helpdata/en/4e/225b42eeb66255e10000000a155106/frameset.htm
You want the technical user type.
-Michael
Ooops I answered to quickly. Someone else already answered.
-Michael
Edited by: Michael Shea on Mar 12, 2008 10:35 AM
My mistake.
Well actually no I am correct. Mike, you are looking for user types.
Edited by: Michael Shea on Mar 12, 2008 10:43 AM

Last Time Machine back-up is 45 days old and only of User Account files (not entire HD) and I must now reinstall Lion without being able to perform a new back-up. Will any new User Account files, since my last back-up, be lost when Lion reinstalls (via i

My last Time Machine back-up is 45 days old and only of User Account files (not entire HD) and I must now reinstall Lion (via internet) without performing a new back-up. Will any new User Account files, since my last back-up, be lost when Lion reinstalls ?

Reinstalling OS X doesn't affect user data, provided nothing goes wrong. But it would be very unwise to assume that nothing will go wrong, especially if you're having (unspecified) system issues. You should try to back up all data before you reinstall or do anything else. There are ways to do that, even if you're unable to boot.
If your backups include only user files, you won't be able to access them in Setup Assistant.

The connection was denied because the user account is not authorized for remote login

Using Terminal Server 2008 not able to get non administrator users to login to the remote desktop. Have tried from Windows server 2008 and from Windows servers 2003. Get error login in "The connection was denied because the user account is not authorized for remote login" from Windows Server 2008. Error "The requested session access is denied" from Windows Server 2000.

Is that seriously the only way to do this? Doesn't this render the "Allow log on through Terminal Services" GP Setting useless?
I would like to know this answer, as well. I have created a new AD group for my assistant admins called "Domain Admins (limited)". I have added this group to the GP setting "Allow log on through Terminal Services", but the
assistant admins cannot log in through RDP. It 'feels like' this is all I would need to do.
Craig
Found some good info
here. There are really two things required for a user to connect to a server via RDP. You can configure one of them via Group Policy but not the other.
1) Allow log on through Terminal Services can be configured through Group Policy, no problem.
2) Permissions on the RDP-listener must also be granted. If your user is a member of the local Administrators group or the local Remote Desktop Users group then this is handled. If you are trying to utilize a new, custom group (as I am),
then there isn't a way to do this via group policy (that I have found).
EDIT: Found the answer. I am creating a blog post to outline the steps. They aren't hard, but they're not self-explanatory. It deals with the Restricted Groups mentioned above, but it's still automate-able using Group Policy so that you
don't have to touch each computer. I think the above poster (Andrey Ganev) got it right, but
I had trouble deciphering his instructions.
Here is my blog post that walks through this entire process, step-by-step.

Orcladmin user account has been expired

Hi All,
My orcladmin user account has been expired. According to the docs i use oidpasswd connect=SID reset_su_password=true to reset the account. I run that command successfully but i am not able to login through orcladmin user.
Apps Server - 10.1.X
Any suggestions?
thanks
Edited by: user8904901 on Aug 23, 2011 4:57 PM

oidpasswd connect=SID unlock_su_acct=true
See Oracle document :
OID PASSWORD POLICY EXPIRES, PASSWORD RESETTING PASSWORD STILL FAILS [ID 272248.1]
If you find this helpful please mark it so.
Best Regards
mseberg

Safari (7.0.1) is non-responsive (spinning pinwheel) upon start up. It will work in temp user account but not in my main user acct. I tried reinstall via comman-r prompt on start up but the problem persists. Any suggestion for reinstall or repair?

Safari is non-responsive after intitial start up. Before it can load the homepage (google), it will hang and give a perpetual pinwheel until I force quit the program. Safari works in temporary user account but not in my primary user account. I have reinstalled osx via the command-r upon start up and the problem still persists. Any suggestions on how to reinstall or repair safari?

Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
So the mystery continues, but these additional facts will help with the diagnosis, I hope.
Thanks again for your suggestion.
Gordon

Can't enroll device for user and this user account is not authorized to use Windows Intune.

Hello,
We have SCCM 2012 R2 inegrated with intune via an intune subscription. When I enroll a device with my admin account there are no problems, but when I want to add it with another user account which is a member of the Intune users collection, it can't be enrolled.
When I tested on https://portal.manage.microsoft.com with the credentials of the user I couldn't connect and received the following error: This user account is not authorized to use Windows Intune.
Do I have to do anything in the https://accounts.manage.microsoft.com as there is a checkbox saying Windows Intune. this is unchecked now for all the users even my own account on which I'm able to enroll a device.
Or is this a license problem? I know configuration Manager uses licenses for Intune but where can we track how many licenses are used and how many available? Is there some kind of report available?
I hope someone can help me
Kind regards,
Robben

I added them yesterday and this morning I was still not able to enroll a device with the added user his credentials.
The UPN is correct. Maybe I need to force the DirSync then? Or will one day of waiting be enough normally?
I can see the user in the intune management portal. Does this means it has been synced?
Another thing I noticed is the cloudusersync.log doesn't show them being added? What I was thinking is I first used the all Users collection in the subscription and afterwards I changed it to a specific collection with only the test users. Could it be that
they all synced already and the log doesn't show them anymore?
A warning in this log shows this also:
WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~   at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()
SMS_CLOUD_USERSYNC   23/04/2014 15:02:18   7684 (0x1E04)
I don't know if that has anything to do with this?
this is an extract of that log:
CCloudUserSync::Process - User sync processing thread is now stopping.   SMS_CLOUD_USERSYNC   23/04/2014 14:59:42   8144 (0x1FD0)
SMS_EXECUTIVE started SMS_CLOUD_USERSYNC as thread ID 7684 (0x1E04).   SMS_CLOUD_USERSYNC   23/04/2014 15:02:15   7572 (0x1D94)
CCloudUserSync::Process - User sync processing has started.   SMS_CLOUD_USERSYNC   23/04/2014 15:02:15   7684 (0x1E04)
Starting user sync ...   SMS_CLOUD_USERSYNC   23/04/2014 15:02:15   7684 (0x1E04)
WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~   at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()
SMS_CLOUD_USERSYNC   23/04/2014 15:02:18   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:02:18   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:22:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:20   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:20   7684 (0x1E04)
kind regards,
Robben

Lync 2013 client is deployed but user accounts are not migrated from OCS to Lync 2013 Server - how to open Lync meetings automatically in the Lync Web Plug-in

We have in our enterprise the following scenario:
1 - Lync 2013 client is installed
2 - User accounts are not migrated to Lync 2013 Server, users are using Office Communicator as their main tool
3 - Users receive Lync 2013 meeting requests but when try to access them, Lync 2013 client launches and shows error. Users will need to open the browser and paste the URL to the address bar but this still open
4 - We cannot use the workaround of adding "?SL=1" to the Lync 2013 meeting URL as the user base is large and manual workaround is not accepted
5 - Question: is there any automated way, via egistry key or GPO setting, so that users temporarily (until their accounts are migrated to Lync 2013 server) can bypass Lync 2013 client completely and automatically open all Lync 2013 meetings
on the browser, using Lync Web Plug-in?

Thanks for the response,
First, I should have mentioned clearly that users have Office Communicator 2007 client and Lync 2013 client installed in their machines. Their accounts are not migrated yet to Lync 2013 server.
Second, we are using IE9 and IE10. The issue is that users CAN join Lync 2013 meetings with their browsers but have to paste the URL manually to browser and add "?SL=1" otherwise, if they just click at the "Join Online Meeting" or "Join
Lync Meeting" URL it launches Lync 2013 client which shows error because is not configured yet, as they are using OCS client and migrating slowly to Lync 2013 server.
Is there a Group Policy setting or a registry key from Microsoft that can be turned on to these users machines and make will all Lync meeting requests to be opened in IE browser instead of Lync 2013 client. We need a way to ignore
Lync 2013 client until user accounts are migrated to Lync 2013 Server. Manually typing URLs is not an option in a big organization, can't explain thousands of users of different levels what to do.
We are regretting the decision not to separate Lync 2013 from Office 2013 package we deployed recently. If Lync 2013 is uninstalled then all Lync meeting requests are opened in browser without an issue.

VMM Shared ISO error "User account does not have permission required to open attachment"

I had this error once because the local service account was selected during installation of VMM. I have reinstalled VMM with a Domain service account and the error went away. However, the error is back.
"User account does not have permission required to open attachment '\\[servername]\VMMLibrary\server.ISO'. Error: 'General access denied error' (0x80070005). (Virtual machine ID GUID)"
I tried to create this VM on Host1 and got the error.
I then went to Host2 and was able to create the VM while using the same ISO on the same VMM library that failed on the Host1.
Both hosts have agent 3.2.7634.0 and are both running Hyper-V Server 2012 R2.
What is wrong with Host1 and how do I correct it?
Thank you.

This is a share configuration permissions issue.
http://technet.microsoft.com/en-us/library/ee340124.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

User X must not be deleted ? :-(

Hi Guys,
When I try to delete a user I receive the message: "User <login> must not be deleted"
Somebody knows why ? or .. should I block the user only ? or force a deletion ?
Thanks for your advice guys !
REgards,
Diego

Hi
Please read this ->
What happens if I delete the user who has created the shopping cart ?
<u>Answer -> If the user is deleted, and the shoping cart exists in the application, then the shooping cart cannot be displayed. If you want to view/ process those shopping carts, then you have to create a dummy user and retrieve the document. In CRMD_PARTNER table, the old user GUID should be replaced with the new user GUID.</u>
Regards
- Atul

Just got a mac air and started using it. after getting it set up i migrated files from my old pc. i did not realize that the files migrated to a different user account. how do i delete this user account and not lose the migrated files which i need

I just got a mac air and set it up and started using. after getting famiiar with it i migrated my files from my old pc. i did not realise that the files migrated to a new user account. how do i delete this user account but not lose the migrated files?

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

There are no children, nor other suspicious characters that have "played" with my computer. One moment I'm in, the next time I turn on/restart the powerbook I'm at a screen with the name of the hard drive and two fields: username and password. Not a list with pictures and names ie 'Katie Jo' with an orange icon and 'Guest' with a silhouette of a head.
In an attempt to remedy this problem, I backed up files using target disk mode and firewire cable. I then, rebooted in single user mode, typed in the correct script and essentially made the computer appear virgin again. Original start up welcome screen display with multiple languages, and then set up prompts such as language, network, and registration. After completing the cues and the "just a few more questions" page, I press continue and am left at a grey standstill, with the continue button greyed out, and no other actions. I'm only able to "go back" by clicking the go back button, all the way to the beginning of the set up, and as I proceed through the steps a second time, I'm greeted with the same halt. What is this?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
Just want to avoild spending hours migrating everything across....

Yes, I can read but just can't write DVD's. I get:
This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
In the old account I have reset SMU, Pram... but no change.

Migrated User Account does not appear at login

Hi: I was having a few glitches with Leopard for my main user account (screen dimming did not work). So I backed up the computer to another disk using Super Duper. I did a clean install of Leopard, did the updates and then used the migration assistant to reimport my user accounts. On the first try, I actually did not migrate the main account I wanted so I used the migration assistant for a second time to import the user information I wanted.
A folder was created in the user folder with all the documents associated with the the main account I wanted to migrate, however on login, this user account does not appear.
Is there a way I can make this account appear at login.
Thanks
Mike

do the following. log in as an admin user and run the following terminal command (copy and paste, do not retype, please)
sudo rm /var/db/dslocal/nodes/Default/users/short-user-name.plist
Instead of short-user-name put in the above the short name of the migrated user. It's the same as the name of that user's home directory in /Users folder.
You'll be prompted to enter your admin password (which you won't see as you type it). that's normal.
Restart and try creating the account with that shortname. it will say that a home directory by that name already exists and ask if you want to use it. say "yes".
you'll now be able to log in into that account.

WLC loses user account database after reload

The certificate on the Wireless Lan controller had expired.
I installed the certificate and restarted the controller.
The controller lost the entire user account database.
I imported the database from another system and after the reload the database was again lost.
Apart from this everything else works fine.
And there are also problems when restoring guest user accounts from Wireless Controll System, WCS the accounts are restored but not the passwords. Also we cannot set expiration date longer then 30 days, we have to set it unlimited first and then change it to limited.
Please let me know if anyone has come across this kind of an issue.

Hi,
I had a similar problem just a day ago:
A WLC4402-50 crashed and lost all of its database entries (Usernames, PSKs, MAC-Adresses,...). I don't know if it restarted and then crashed, or if it crashed and then restarted because of the crash.
The crash log contains this lines:
"Analysis of Failure:
Software was stopped for the following reason:
The system has encountered a fatal condition at mmc_system.c:2093"
Very strange behaviour. I would appreciate any comment, if i have to exchange the hardware or if i shouldn't take any action.
Regards,
Sebastian

WLC 4400: User Account must not expire

Similar Messages

Maybe you are looking for