Wlc 4402 errors when trying to join ap

Hello,
I have a wlc 4402 controller with software version 6.0.199.4
now i have problems adding 1131 aps to my controller.
in the pas i added 15 access points (withouts problems) but
now doesn't seems to work anymore.
here's what i got from controller when trying to join
*Nov 11 12:24:37.739: %LWAPP-3-RADIUS_ERR: spam_radius.c:138 Could not send join reply, AP authorization failed; AP:00:13:c4:93:c1:58
here's what i got on the AP (console cable on my pc when booting)
%LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init (SSC): no certs in the SSC Private File
Got an idea on this ?
thanks for help

Was the AP in automatic mode before? Did you copy the LWAPP recovery image to the AP using tftp?
All APs manufactured before 2005 or 2006 do not have MIC (manfacture install MIC) installed. You need to use LWAPP conversion tool to convert the AP to LWAPP/CAPWAP; so that the conversion tool will install SSC (Self Signed Certificates) to build the encrypt the LWAPP/CAPWAP control traffic:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
As LWAPP discovery image is already there, you need to convert the AP back to autonomous mode and use LWAPP conversion tool to conver the AP:
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38trb.html#wp1058472
I hope that the mode button is not disable on the AP. if it does, I hope that the break key is not disable. If both the mode button and break key are disable, you need to RMA the AP.

Similar Messages

Error when trying to join secondary to array

Hi All,
We had this problem about a year ago. Trying to join a secondary server to an array, we receive the following message javax.naming.CommunicationException: ErrTransportPermanent . No answer as to how it was corrected, but we were finally able to join the server into the array. Last evening we ran the 0214 Solaris 10 Recommended patch cluster, the problem has reappeared.
Have checked the host files for IP FQDN SHORTNAME , consistant across the servers.
Also checked /opt/tarantella/var/serverconfig/local/bootstrap.properties , consistant across servers, all showing the FQDN of each server.
NTP checks are consistant, 2 servers in EST the other 2 CST.
Strange in that one of the servers joined into the array is on the same subnet with the same configuration as the server giving the error.
Any thoughts ?
thanks
Sun Secure Global Desktop Software for SPARC Solaris 2.8+ (4.50.907)
Architecture code: spso0510
This host: SunOS 5.10 Generic_144488-08 sun4u sparc SUNW,Sun-Fire-V490

Dear Eric,
It's Domain Joined PC.
For 1, i deployed the CA role on the AD server, i also checked the CA, but no error report could be found.
For 2, the Date&time are correct and sync from AD time.
I post below blocked content, i am not sure if useful for error analyse.
Server Error in '/lwa' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could,
however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory
of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to
a custom error page URL.

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

'Blank user name' error when trying to change email password

My password on our mail server changed, when I tried to change the password on my Storm 9500 I get 'Blank user name' error when trying to change, but I have typed in a user name!!!!
BLOODY frustrating because now I am not receiving any mails at all, so my business out of the office has come to a standstill!!!!
Vicky
Solved!
Go to Solution.

Try changing the email password on your PC, if you are having problems doing so from your device.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe

"please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe
I need to install this so that i can transfer my contacts and calendar to my laptop

Hi and Welcome to the Community!
Sorry to be dense, but what happens when you do exactly as the message instructs?
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Fatal error when trying to add derived table

Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PM

Hi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik

I am getting an activation error when trying to sign in to FAceTime

I am getting an activation error when trying to sign in to FAceTime

me too after upgrading into lion..

Keep getting 5002 Error when trying to Sign In

Hello,
I created a new @me.com address today for a seperate Apple ID account. I am needing to sign into the iTunes Store, but I keep getting a response that says:
"We could not complete your iTunes Store request. An unknown error occurred (5002)."
Any ideas as to what's going on here?
I also took a screen cap of the issue:
Thank you for the help!
Marcus

Thank you for your response Carolyn; however, that article does not fix my problem. I am getting this error when trying to sign into the iTunes Store on my Mac.
I get the same problem when signing into the Store on the iPad or iPhone. I simply can't log in, but when I go to iCloud.com or the Apple ID login on Apple.com, it works.
Marcus

I get error message "unknown error" When trying to log on to itunes via pc, help please!

I get error message "unknown error" When trying to log on to itunes via pc, help please!

Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

Error when trying to update or download any app

I'm getting an Error when trying to update or download any app from Mac App Store
Every time I try to update xCode to version 6.2 but I get this error :
The server gave an error during download: 503 Service Unavailable.
So I tried to download a random app from the App Store but I got the same error message.
So any advices ?

Hello HusseinAlBehary,
Sorry to hear your troubles updating and downloading apps from the Mac App Store. Based on when you were doing that, it looks like the Mac App Store was experiencing difficulties. It is not currently so you should be able to upgrade with out issues now. If you experience this in the future, look at the page below to start you on figuring out if it is something on your end or Apple’s end.
Apple Services, Stores, and iCloud
https://www.apple.com/support/systemstatus/
Regards,
-Norm G.

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Unable to load media error when trying to play a video in Sharepoint 2013

My team consistently gets an error when trying to play a video in SharePoint 2013. I can upload it, pick a thumbnail and save it. When anyone else goes to the intranet site and tries to play the video, they get a media failed to load error.
I have tried mp4 and wmv formats. I at first thought it had to do with the codec used in Camtasia to create the video, so I encoded it in Microsoft Encoder to a wmv and it still fails. All of the videos I upload fail for other users. If someone else uploads
a video, I get the error and cannot play the video. If I look at the library in Explorer, the video file is missing but the subdirectories for additional content and thumbnails are present. For the videos I upload and can play but everyone else
gets the error, I see those subdirectories as well as the video file itself.

Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
Comments
Custom
963
404
HTTP
team.hagerman.com
/submissions/Compiled%20Videos/AutoCAD%20-%20Multiple%20Profile%20Icons/AutoCAD%20-%20Multiple%20Profile%20Icons.wmv
13
private,max-age=0; Expires: Tue, 11 Feb 2014 21:58:26 GMT
iexplore:15076
[#956]
Request:
GET /submissions/Compiled%20Videos/AutoCAD%20-%20Multiple%20Profile%20Icons/AutoCAD%20-%20Multiple%20Profile%20Icons.wmv HTTP/1.1
Accept: */*
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; .NET4.0E; Zune 4.7; AskTbAD2/5.15.4.23821)
Host: team.hagerman.com
If-Modified-Since: Wed, 26 Feb 2014 19:07:33 GMT
If-None-Match: "{8A07B719-341D-4BEE-BD61-F364394C3E98},2"
DNT: 1
Connection: Keep-Alive
Cookie: databaseBtnText=0; databaseBtnDesc=0; stsSyncAppName=Outlook; stsSyncIconPath=%2F%5Flayouts%2F15%2Fimages%2Fmenuoutl%2Egif; __utma=95027589.2092965952.1364844931.1393356332.1393429315.524; __utmz=95027589.1393268194.522.68.utmcsr=SilverpopMailing|utmccn=TE%20-%20St.%20Louis%20MCAD%20(12)|utmcmd=email;
__qca=P0-1092250856-1367500502168; km_ni=joyvoltenburg; km_uq=; km_lv=x; km_ai=joyvoltenburg; grvinsights=3a306cce826491ec77d9a195a63f57f2; __avc_32508=045-8a-724d-ee8f13e900daac4; Persistent_id_HgixPXFYDDdj0w=0C78ABCB2F34:1392388341; optimizelySegments=%7B%22178845731%22%3A%22false%22%2C%22178855892%22%3A%22ie%22%2C%22179190226%22%3A%22direct%22%7D;
optimizelyEndUserId=oeu1379624626946r0.0872463653920379; optimizelyBuckets=%7B%7D; __utmc=95027589; StorefrontCookie=cmen-US=en-US&bm=US; WSS_FullScreenMode=false; Ribbon.Read=1920886|-1|0|-687423497; Ribbon.DocLibListForm.Edit=682788|-1|0|1882364446;
Ribbon.Library=1920886|-1|710|-687423497; Ribbon.Permission=1920886|-1|1725|1598418443; Ribbon.ListForm.Display=1920886|-1|1620|-1006461573; previousLoggedInAs=; loginAsDifferentAttemptCount=
Authorization: Negotiate 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
Response:
HTTP/1.1 404 NOT FOUND
Cache-Control: private,max-age=0
Content-Length: 13
Expires: Tue, 11 Feb 2014 21:58:26 GMT
Server: Microsoft-IIS/7.5
X-SharePointHealthScore: 0
Public-Extension: http://schemas.microsoft.com/repl-2
SPRequestGuid: 1826789c-0589-80e7-31cd-3c1038ea29f6
request-id: 1826789c-0589-80e7-31cd-3c1038ea29f6
X-FRAME-OPTIONS: SAMEORIGIN
SPRequestDuration: 1132
SPIisLatency: 1
WWW-Authenticate: Negotiate oYGyMIGvoAMKAQChCwYJKoZIgvcSAQICooGaBIGXYIGUBgkqhkiG9xIBAgICAG+BhDCBgaADAgEFoQMCAQ+idTBzoAMCAReibARqhLWFbGbcecrn5kQ/ScMjrsqhag2XcrWQQ7g0Mb6ilZ+kFIPC6XJsH7+ldzTk3eQF/4C1f2nzJxENlP2M+75fOiRZGU/r0nvjgX5MdswmrBQkRg8iqKwcwJeE/3/P7nLWVitRs21hnB19oQ==
Persistent-Auth: false
X-Powered-By: ASP.NET
MicrosoftSharePointTeamServices: 15.0.0.4420
X-Content-Type-Options: nosniff
X-MS-InvokeApp: 1; RequireReadOnly
Date: Wed, 26 Feb 2014 21:58:25 GMT

I keep receiving security errors when trying to open a pdf.

I keep receiving a security error when trying to run my javascript program, the function previously worked, but now creates an error after I entered the addWaterMark function. I have put my whole code below for my script.
The basic function is to load a text file into an array which has the path and file location, open the document, add a watermark, save the file, close the file, then repeat for the next array position.
I am using Acrobat Standard so I am unable to debug using the console, therefore I am struggling to understand what I am doing wrong. I will point out that I am not a fluent programmer, only have a basic knowledge of programming.
Code
app.addSubMenu(
cName:"Extras",
cParent:"Edit"
app.addMenuItem(
cName:"Import File",
cParent:"Extras",
cExec:"main()"
function main()
var fileCount = 0
var listOfFiles = []
listOfFiles = importData()
amountOfFiles = listOfFiles.length
for (var i =0; i<listOfFiles.length; i++) //calculates amount of entries in the array listOfFiles
newFile = openFile(listOfFiles[i]) //Opens current file
var d = app.activeDocs; //Gets current document title name
addWater(d[0]);
app.execMenuItem("Save");
for( var x in d ) d[x].closeDoc();
function addWater(myName)
{ app.alert("watermark",0);
myName.addWatermarkFromText(
cText: "OBSOLETE",
cFont: "Arial",
nFontSize:36,
aColor: color.red,
nOpacity: 0.5
//function SaveFile saves the current file but with an addition of WM to the filename
saveFile = app.trustedFunction(function(currentDoc, currentFileName)
{ app.alert("savefile",0);
app.beginPriv();
currentDoc.saveAs(currentFileName);
app.endPriv();
//function openFile which opens the file named in the variable currentFilename
openFile = app.trustedFunction(function(currentFileName)
{app.alert("openfile" + currentFileName,0);
app.beginPriv();
app.openDoc(currentFileName);
app.endPriv();
//importData function imports the paths and filenames contained in the list.txt located on the desktop
importData = app.trustedFunction(function()
{app.alert("import",0);
app.beginPriv();
cFilePath = "/C/Users/103019944/Desktop/File_List.txt";
var stmData = util.readFileIntoStream(cFilePath);
var cData = util.stringFromStream(stmData);
var cMsg = cData;
var fileArray = cMsg.split("\r\n");
for (var i =0; i<fileArray.length; i++)
return(fileArray);
app.endPriv();

I have found the error, you are quite correct I had an extra letter in the filename, I thought I'd checked this but just shows that sattention to detail is the key.
The script works perfectly now, thanks you for your help, really appreciated.
Thanks again
Ben

Keep getting VncViewer.class not found error when trying to use Windows 7

Greetings,
I have no issue accessing the OVM Manager 2.2 with OEL 5.4 x86_64 with the latest Java release from ULN. But when I use a Windows 7 client ( x86) with the Sun Java 6 Update 18 I get the following error when trying to access the Console of a VM Guest:
Java Plug-in 1.6.0_18
Using JRE version 1.6.0_18-b07 Java HotSpot(TM) Client VM
User home directory = C:\Users\deverej
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class VncViewer.class not found.
java.lang.ClassNotFoundException: VncViewer.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://141.144.112.202:8888/OVS/faces/app/VncViewer/class.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: VncViewer.class
I am curious fi I should use only a specifc Java Engine with IE 7 or the latest Firefox browers.

Same issue to with Windows XP SP3 x86 with Java Runtime Enviornment 1.5.0_15
J2SE Enviornment 5.0 Update 15
Java 6 Update 17

Error when trying to convert excel files to pdf

I'm getting the following error when trying to convert .xls and .xlsx files to pdf, using the "Create PDF" option:
Error message from the primary converter:
ALC-PDG-010-012-PDFMaker reported an error while printing the document.
Word, Powerpoint and Text files convert without any issues. Also I'm able to opent the excel files and convert them to pdf using the acrobat option in excel.
Livecycle Version: 10.0.2, GM
MS Office Version: 2007
Any help would be appreciated. Thanks in advance.
Regards,
Suhail N.

It is always difficult when you need to convert multiple xls files to pdf or multiple sheets to pdf. If you have a single file to convert then the best method would be to copy your data to doc file and then convert it into PDF . If you have multiple files to convert then it is really difficult to convert all the files manually. Then the better method would be to use converter tool to convert excel to pdf . By doing this you can convert many files in just few seconds.

On Windows Platform, encounters error when trying to open an Indesign document created from MAC

Hi all,
On Windows Platform, encounters error when trying to open an Indesign document in INDD format created from Mac. Error received "Either the file does not exist, you do not have permission, or the file may be in use by other application". I am currently using Adobe Indesign CC 9.2 Trial version.
Kindly advise how can i open this document on windows platform and allows me to edit the document.
Thanks!
With Rgds,
Fiona Choy

Normally there is no problem to open any INDD opening on Windows, when created on the Mac.
But Mac user are often not aware on the naming limitations. A file name must not contain /, \, |, :
It should not contain any extended character, it is not a primary problem but will be, if something links to that file, so avoid also: ÄÖÜäöüß+&
You can use all other non A-Z a-z, 0-9 and - and _
I personally would also recommend to avoid spaces.
This is valid for the INDD file itself but also for all linked content.

Wlc 4402 errors when trying to join ap

Similar Messages

Maybe you are looking for