WLC 4402 password recovery

I can't find the password recovery procedure for the 4402 Wireless LAN Controller on CCO. Could someone please give a non-partner URL?
Thanks.

Hi Friend,
Unfortantely, there is no password recover for the WLC unless you have WCS. If you have WCS can push a new admin username/password to the controller. If you do not have WCS then you have to default the configuration to access the device. You can do so by using the console port and upon booting up you hit the 'ESC' key. It will then prompt you so you can default the configuration.
The WLC config needs to be cleared from the boot menu on the CLI (after hitting the Esc key when you see the Cisco logo) and rebuilt from scratch.
HTH
Ankur
*Pls rate helpfull post

Similar Messages

WLC 4402 username and password expires automatically

Hi,
We are facing issue with Cisco WLC 4402 (Cisco AireOS Version 4.2.205.0) and username and password expired automatically. It happens very often. We are not able to retreive the password, so everytime we need to reset(factory default) the Cisco WLC4402 and doing fresh installation.
Whether it is the hardware issue or software bug.
Also is there any possibility of recover the username and [password with resetting the cisco wlc4402.
Kindly suggest on this issue.
Regards
S.Manikandan

Hmmm.. Strange!! are we using any TACACS to manage?? or just the management username and password??
I guess after 5.2 WLC code or so we have the option of resetting the password without losing the config!!
Regards
Surendra

How to disable Password Recovery in WLC 4400

Hi All,
I need your help to disable the password Recovery for the WLC 4400, in case of the hardware stolen or hacking by internal hacker,
Thanks in advanced for your help,
Ahmed

Gee whiz. This is the second post you've made in regards to disable password-recovery mechanism. For the WLC, I agree with Nic, it's not possible. And, for the record, there are ways to bypass a disable-password-recovery mechanism. This is mainly due to prevent un-authorized use of this mechanism by, for example, a disguntled network administrator from shutting down a network.

Need Information For Connecting Access point to WLC 4402

Hi Friends
I need Some information for Connecting my New Access point ( Cisco AIRLAP 1242AG) with WLC(4402) Controller
In our network set up we have two WLC(4402) we needs to Connect this New Accesspoint To one of our WLC
My Access point is brand New. I need to Know what all i have to do inorder to connect this AP to the controller (from Acesspoint perspective & WLC perspective)
I need to Know what I need to do in AP to connect to the Controller
Do i need to Assign Static IP Address forAP or after connecting to the switch it automatically gets ip from DHCP and regsiter with controller??
Do i Need to Configure my AP with default gateway(the switch to which is connected ?) & DO i need to configure the AP with Controller Ip address ??
Pls Assist
Regards
Safwan

Hi Scot...
We tried Connecting the Access Point yesterday, but it failed....
We are using Cisco 3500 Access point ...
when we connected , first it automatically got an ip address using DHCP but following error occurred
P70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
Not in Bound state.
*Mar 1 00:13:56.539: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination
*Mar 1 00:13:56.555: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 10.50.11.26, mask 255.255.0.0, hostname AP70ca.9bd5.77c6
*Mar 1 00:14:04.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:14.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:24.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported
version 6.0
.182.0
version 6.0
.182.0
on WLC USSTLController01
version 6.0
.182.0
Then I COnfigured Ap with Static ip address & default gateway & controller Ip but tht too didnt work...
.182.0 on WLC USSTLController01
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
P70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
I also Need to Know Cisco Access point 3500 can be associated with WLC 4402 ( version 6.0.182.0) ??
Pls Advice How to proceed further

1131 LWAP not join WLC 4402

I am deploying WLC 4402 with LWAP 1131 but AP fail to join the WLC .The resone that I dont have DNS server.The error message in the AP is :
AP001d.451f.8582>
*Mar 1 00:00:38.005: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 172.26.5.12, mask 255.255.255.0, hostname AP001d.451f.8582
Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:00:49.371: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve
I tried to configure the Controller address in LAP but I fail ,The error when I tried to configure AP is below:
AP001d.451f.8582#lwapp ap controller ip address 172.26.5.10
ERROR!!! Command is disabled.
my question is :
is it possible to make LAP join WLC with out DNS,if yes how ?

Hi Yhab,
There are other ways besides DNS to help in the AP and WLC Discovery process. Have a look in this good doc;
Lightweight AP (LAP) Registration to a Wireless LAN Controller (WLC)
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml#topic2
For the Static entry problem;
If this AP was ever registered you can use this command from the LAP CLI to clear the LWAPP configuration on the LAP:
clear lwapp private-config
This allows you to use the AP LWAPP static configuration commands again.
Here is an example:
Enable (enter password)
AP1240#clear lwapp private-config
AP1240#lwapp ap hostname AP1240
AP1240#lwapp ap ip address 10.77.244.199 255.255.255.224
AP1240#lwapp ap ip default-gateway 10.77.244.220
AP1240#lwapp ap controller ip address 172.16.1.50
Note: You cannot use the clear lwapp private-config command when the LAP is registered with the controller.
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a00808e2d27.shtml#t2
Hope this helps!
Rob

Cisco WLC 5508 Password Invalid? (Fixed!Thanks)

Hi Guys,
In this afternoon, I did some testing in WLC in our company wireless network.
However, after my 3 hours testing, I had tried to login WLC again by GUI and SSH. The admin username and password does not work any more. All Read only and Guest Account did not work as well.
Is any one had this issue before? Is there a restriction for access to WCL per 3 hours or one day? By the way, I did not change any password.
Thanks

Thanks a lot.
Well, as your said, I had disabled and enabled management of the RADIUS server because I was testing multiple RADIUS failover. And also, I have changed authentication priority of the WLAN, I moved RADIUS above of Local.
By the way, I called TAC last night, they told me that in 5508, I have to configure Management port and Service Port in two different SUPERNET. That may cause my issue. However, it worked fine in last 9 months. (Now is 192.168.159.200 & 192.168.1.1)
Another question, do you thing if I connect to WLC by service port or console, the username and password will work?
I am afraid that the password will not work even I do password recovery. It was happened before, at that time, the only way is that I refresh the controller to factory default.
Right now, we are using HREAP mode for all APs, because all AP are distributed in different cities; and APs got diffierent subnet. We know when the AP first time joined to WLC, they must be in the same subnet. If I refresh the WLC but use the same management IP address. Do I need to ask all office to send AP back to WLC office?
Thanks

Password Recovery Cisco WLAN Controllers

Hi,
I would like to know the procedure for recoering passwords on Cisco 2000/ 4000 series contorllers.
Please Help!
Thanks and Regards,
Mohan

Sorry, you have to reset to factory defaults. Then reconfigure. Here's the TAC Case
Solution # K52826052
Title How to recover a password on the Cisco Wireless LAN Controller
Core Issue
Resolution
There is no password recovery option on the Wireless LAN Controller (WLC). You need to set the WLC to factory defaults and reconfigure it.
In order to set the WLC to factory defaults, power cycle the WLC, press ESC Key during the boot up process from the console and select last option(5) to clear the configuration and reboot the Wireless Lan Controller.
Note:The new default username and password is "admin".

Wlc 4402 errors when trying to join ap

Hello,
I have a wlc 4402 controller with software version 6.0.199.4
now i have problems adding 1131 aps to my controller.
in the pas i added 15 access points (withouts problems) but
now doesn't seems to work anymore.
here's what i got from controller when trying to join
*Nov 11 12:24:37.739: %LWAPP-3-RADIUS_ERR: spam_radius.c:138 Could not send join reply, AP authorization failed; AP:00:13:c4:93:c1:58
here's what i got on the AP (console cable on my pc when booting)
%LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init (SSC): no certs in the SSC Private File
Got an idea on this ?
thanks for help

Was the AP in automatic mode before? Did you copy the LWAPP recovery image to the AP using tftp?
All APs manufactured before 2005 or 2006 do not have MIC (manfacture install MIC) installed. You need to use LWAPP conversion tool to convert the AP to LWAPP/CAPWAP; so that the conversion tool will install SSC (Self Signed Certificates) to build the encrypt the LWAPP/CAPWAP control traffic:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
As LWAPP discovery image is already there, you need to convert the AP back to autonomous mode and use LWAPP conversion tool to conver the AP:
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38trb.html#wp1058472
I hope that the mode button is not disable on the AP. if it does, I hope that the break key is not disable. If both the mode button and break key are disable, you need to RMA the AP.

Blackberry ID - forgot password, forgot password recovery info, exceeded login attempts, why can't BB send me email to reset password.

THE ISSUES ARE:
1. FORGOT PASSWORD
2. FORGOT PASSWORD RECOVERY INFO
3. EXCEEDED ATTEMPTS TO LOGIN
I HAVE READ OTHER PEOPLES FORUM PROBLEMS THAT ARE THE SAME. WHEN I FOLLOWED LINKS THAT SUPPORT GAVE THERE IS NO SOLUTION TO ACTUALLY FIX THE PROBLEM.
What I need is simply this: Blackberry to send me a RESET PASSWORD link to the email I have registered with Blackberry WITHOUT HAVING TO PROVIDE PASSWORD RECOVERY INFO. This will enable me to bypass unknown recovery password info and access my Blackberry ID account.
Why haven't I been able to find a solution to fix the problem?
BECAUSE IT DOESN'T APPEAR TO EXIST........ ANYWHERE..... EVEN ON YOUTUBE BLACKBERRY ARE RUNNING AN OUT OF DATE SOLUTION CENTRE.
When looked online to Blackberry youtube video it shows a solution that doesn't exist! WHY? BECAUSE IT WAS UPLOADED IN 2011. DUH. http://www.youtube.com/watch?v=lvdRb4qNG1M
If I can't remember my password or recovery password info there is NO other option available that will send me a reset password via email so I can keep my current BB ID.
KB34776 - does not apply because you HAVE TO BE ABLE TO REMEMBER YOUR RECOVERY PASSWORD!
CHECKED THIS OUT...
Workaround
If the BlackBerry ID password has been forgotten but the answer to the password recovery question is known, select Forgot Password on the smartphone and answer the recovery question to generate a password reset email. Follow KB28685 to complete this process.
If the BlackBerry smartphone user knows the email address used for the BlackBerry ID login but is unable to remember the associated password then it is possible to reset the password using the steps below:
Note: If the BlackBerry ID account is not confirmed, it is necessary to provide the answer to the password recovery question as part of the web based password reset flow.
To see if a BlackBerry ID account is confirmed, log in to the BlackBerry ID account, select Account Details and locate the Email Status field.  For instructions on confirming the BlackBerry ID account follow KB34137.
Browse to the following URL using a desktop browser, the BlackBerry Browser on the BlackBerry smartphone, or the Browser on the BlackBerry PlayBook: http://blackberryid.blackberry.com/bbid/recoverpassword
Enter the BlackBerry ID Username (email address) and the CAPTCHA characters, then clickSubmit.
Enter the Answer to the Password Recovery Question, then click OK.
Note: Answering the recovery question is only required if the BlackBerry ID account is not confirmed.
A confirmation message will be displayed A password reset email has been sent to [email protected], at which point, a reset email will be delivered to the associated email address inbox.
Log in to the email account associated to the BlackBerry ID using the desktop browser, BlackBerry Browser on the smartphone, or the Browser on the BlackBerry PlayBook.
Locate the password reset email and select the Change your BlackBerry ID password link.
Note: The BlackBerry ID reset email will come from [email protected]. If the email is not found in the inbox, check the mailbox's Spam or Junk folder.
When the password reset page loads, enter the Answer to the Password Recovery Question, enter the New Password, Confirm Password, then click Submit.
A confirmation message will display once the changes have been saved successfully.
Moving forward use the newly created password whenever logging into BlackBerry ID.
If the BlackBerry smartphone user does not know the email or password that was used for the BlackBerry ID, the BlackBerry ID will be locked out after 10 unsuccessful login attempts. See KB24157 for BlackBerry ID lockout behavior.
THEN CHECKED KB24157......
Overview
BlackBerry ID is the master key to BlackBerry smartphone products, sites, services and applications, including BlackBerry Protect and the BlackBerry App World storefront.
To prevent unauthorized access to the account, the BlackBerry ID will become locked out after a number of failed attempts. See the information below for an outline on the expected behavior:
Local Authentication Lockout
On BlackBerry PlayBook and BlackBerry smartphones if the user enters their BBID password incorrectly 10 times on the BBID sign in screen, verify password screen, or BBID Edit screens, they are LOCKED OUT of all the following functions on that BlackBerry device for 15 minutes:
Authenticating with their BlackBerry ID on the sign in screen
Authenticating with their BlackBerry ID on the verify password screen
Authenticating with their BlackBerry ID on the BBID edit screens
Note: The user can still log in on the web or any other devices associated with their BlackBerry ID. They are only locked out on the device where the 10 incorrect attempts occurred. On the locked out device, after 15 minutes, they get 1 try to provide the correct password on the sign in and/or verify password screens. If they fail to enter the correct password, they are locked out for an additional 15 minutes on that device.
Account Server Lockout
Users have total of 10 attempts to enter their password correctly against the BlackBerry ID Account Server.
The scenarios that increment the Account Server lockout counter are as follows:
Providing an incorrect password anywhere on the BlackBerry ID web portal (blackberry.com/blackberryid)
Providing an incorrect password within the BlackBerry ID Edit feature on any BlackBerry device or BlackBerry PlayBook
Note: if a user provides an incorrect password 5 times on the BlackBerry ID web portal (blackberry.com/blackberryid), and then 5 more times on the BlackBerry ID Edit feature on their BlackBerry PlayBook, the cumulative number of failed attempts is 10. Once the user has made 10 incorrect attempts to provide their password against the Account Server, they are locked out of the Account Server PERMANENTLY until they reset their password.
See KB26361 for information to reset a BlackBerry ID password
Note: The Account Server Lockout does NOT prevent the user from local authenticating on devices (the user can still authenticate on the sign in and verify password screens on their BlackBerry devices).
Forgot Password Lockout
If the user answers their Security Question incorrectly 10 times, they are locked out for 15 minutes of Forgot Password functionality on all interfaces such as:
BlackBerry website (blackberry.com/blackberryid)
BlackBerry PlayBook
BlackBerry smartphone
Note: After 15 minutes, they get 1 try, and if they fail to answer the question correctly, they are locked out for an additional 15 minutes.
THAT DIDN'T WORK SO NOW ITS BACK TO..... KB26361
Overview
To change the BlackBerry ID password, complete the steps below for the specific device:
From the BlackBerry 10 smartphone:
Swipe down from the top bezel on the home screen and select Settings.
Scroll down and select BlackBerry ID.
Select Change Password.
Enter the current password in the Current BlackBerry ID Password field.
Enter the new password in the New BlackBerry ID Password and Confirm New Passwordfields.
Select Submit to complete the password change.
To confirm the change You have changed your password will be displayed.
Also, if the BlackBerry ID password has been forgotten, select Forgot Password on the smartphone and answer the recovery question to generate a password reset email. Follow KB28685 to complete this process.
Note: When using the recovery question password reset method, the generated email will be delivered to the BlackBerry 10 smartphone if the BlackBerry ID email address has been setup via Settings >Accounts
From a computer:
Visit http://www.bbid.com/ from a PC or BlackBerry smartphone browser.
Click Log in.
Enter the BlackBerry ID Username (email address) and password, then click Sign In.
Click Account Details.
Next to Password, click Edit.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click Save.
Click Done to exit from the BlackBerry ID account information screens.
From the BlackBerry smartphone running BlackBerry 6:
Navigate to Options > Third Party Applications > BlackBerry ID.
Click on Change next to BlackBerry ID Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click OK.
A confirmation message will display Your password has been successfully changed.
Click OK.
From the BlackBerry smartphone running BlackBerry 7:
Navigate to Options > Device > BlackBerry ID.
Click on Change next to BlackBerry ID Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click OK .
A confirmation message will display Your password has been successfully changed.
Click OK.
From the BlackBerry Playbook tablet:
Navigate to the Options icon.
Select BlackBerry ID.
Click on the Edit button next to Change Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click Submit.
A confirmation message will display You have changed your password.
Click OK.
If the password for a BlackBerry ID account has been forgotten and the login is unsuccessful, use the following process to reset the password.
Note: If the BlackBerry ID account is not confirmed, it is necessary to provide the answer to the password recovery question as part of the web based password reset flow.  To see if a BlackBerry ID account is confirmed, login to the BlackBerry ID account, select Account Details and locate the Email Status field.  For instructions on confirming the BlackBerry ID account follow  KB34137.
To generate a password reset email, complete the following:
Browse to the following URL using a desktop browser, the Browser on the BlackBerry smartphone or the Browser on the BlackBerry PlayBook: http://blackberryid.blackberry.com/bbid/recoverpassword
Enter the BlackBerry ID Username (email address) and the CAPTCHA characters, then clickSubmit.
Enter the Answer to the Password Recovery Question, then click OK. (Answering the recovery question is only required if the BlackBerry ID account is not confirmed)
A confirmation message will be displayed A password reset email has been sent to [email protected] , at which point, a reset email will be delivered to the associated email address inbox.
Login to the email account associated to the BlackBerry ID using the desktop browser, BlackBerry Browser on the BlackBerry smartphone or the browser on the BlackBerry PlayBook.
Locate the password reset email and select the Change your BlackBerry ID password link.
Note: The BlackBerry ID reset email will come from [email protected] If the email is not found in the inbox, check the Spam or Junk folder.
When the password reset page loads, enter the Answer to the Password Recovery Question, enter the New Password, Confirm Password, then click Submit.
Note: Answering the recovery question is only required if the BlackBerry ID account is not confirmed.
A confirmation message will display once the changes have been saved successfully.
Moving forward use the newly created password whenever logging into BlackBerry ID.
Note: If the BlackBerry ID email address is a BlackBerry mail address (e.g. <username>@tmo.blackberry.net), the BlackBerry ID password reset email will not be received on the BlackBerry smartphone. Since the BlackBerry mail address is not accessible from a computer, the steps outlined in KB28111 will need to be performed.
IT ALL LEADS BACK TO THE SAME UNHELPFUL NON-SOLUTION OF USE THE PASSWORD RECOVERY QUESTION....
Can the tech department of Blackberry please sort out this ridiculous unhelpful system by sending customers a direct email if password is forgotten so they can reset without having to go through the above without finding a solution.
THANK YOU.

Hi and Welcome to the Community!
Please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you.
That said, it sounds like you have exhausted all of the automatic recovery methods...but just in case, please see this "sticky" post for helpful information concerning your BBID situation:
http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
Hopefully, this information will be of use to you.
But do please keep in mind that security is a 2-way street...the human element play an equal part in that security, and you have failed at that in this situation, yet desire for the automated methods to still recover for you. Such just isn't possible, because your failure has exceeded the capabilities of the automated methods.
Hence, you likely need human intervention from an actual BB representative, which is not available in this forum (as discussed in the first link I gave you above). But, the methods to attempt to seek human intervention are posted within the 2nd link I gave you.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

My safari keeps crashing because of a bat password recovery plug in. What do I do to fix it?

My safari keeps crashing on me, and when it does it always says it was because of some Bat! Password Recovery Plugin. How can I fix this and stop t from happening?

You’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
Select  ▹ Software Update to install the latest Java update (if Java is already installed) or the Flashback malware removal tool (if Java is not installed under Lion), as well as any other available updates. Installing either of those items should clear the infection in most cases. No other action is required on your part. You must update to the latest version of Mac OS X 10.6 or 10.7 before you can install the Java update.
Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Do this after you’ve secured your system, not before.

Cisco AIR-LAP1041N-E-K9 not working with WLC 4402 version 7.0.116.0

Hi All,
appreciate your support for a problem i started facing today. i have a Cisco WLC 4402 running version 7.0.116.0 and it is working great with 25 Cisco 1252 APs. we have recieved a new 20 Cisco 1041N APs today and i installed one in our site but it doesn't work. it worked fine and loaded the image from flash and got the WLC ip address through DHCP option and started showing the below error:
*Mar 1 00:00:10.021: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:10.033: *** CRASH_LOG = YES
*Mar 1 00:00:10.333: Port 1 is not presentSecurity Core found.
Base Ethernet MAC address: C8:9C:1D:53:57:5E
*Mar 1 00:00:11.373: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:11.465: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1088 messages)
*Mar 1 00:00:11.494: status of voice_diag_test from WLC is false
*Mar 1 00:00:12.526: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:13.594: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:13.647: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 12.4(23c)JA2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 13-Apr-11 12:50 by prod_rel_team
*Mar 1 00:00:13.647: %SNMP-5-COLDSTART: SNMP agent on host APc89c.1d53.575e is undergoing a cold start
*Mar 1 00:08:59.062: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:08:59.138: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:08:59.837: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:09:00.145: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:09:09.136: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e
*Mar 1 00:09:17.912: %PARSER-4-BADCFG: Unexpected end of configuration file.
*Mar 1 00:09:17.912: status of voice_diag_test from WLC is false
*Mar 1 00:09:17.984: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:09:19.865: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:09:19.886: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:09:20.873: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:09:20.874: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
Translating "CISCO-CAPWAP-CONTROLLER.atheertele.com"...domain server (172.16.40.240)
*Mar 1 00:09:29.029: %CAPWAP-5-DHCP_OPTION_43: Controller address 172.16.100.102 obtained through DHCP
*May 25 08:27:02.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:02.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:03.175: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:03.177: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:03.177: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:03.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:03.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:03.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:03.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:03.448: status of voice_diag_test from WLC is false
*May 25 08:27:14.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:14.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:15.185: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:15.186: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:15.186: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:15.330: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:15.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:15.334: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:15.334: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:15.450: status of voice_diag_test from WLC is false
*May 25 08:27:26.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:26.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:27.182: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:27.183: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:27.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:27.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:27.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:27.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:27.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:27.433: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*May 25 08:27:27.446: %PARSER-4-BADCFG: Unexpected end of configuration file.
*May 25 08:27:27.447: status of voice_diag_test from WLC is false
*May 25 08:27:27.448: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*May 25 08:27:27.456: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*May 25 08:27:38.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:38.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:39.183: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:39.184: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:39.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:39.326: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:39.329: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:39.329: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:39.330: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:39.446: status of voice_diag_test from WLC is false
*May 25 08:27:49.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:49.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:50.179: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:50.180: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:50.180: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:50.323: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:50.326: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:50.326: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:50.326: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:50.425: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*May 25 08:27:50.438: %PARSER-4-BADCFG: Unexpected end of configuration file.
i searched for the regulatory domains difference between AIR-LAP1041N-E-K9 and AIR-LAP1041N-A-K9 and didn't find any difference that may affect the operation of this AP.
just to mention that our configuration in WLC for regulatory domains is:
Configured Country Code(s) AR
Regulatory Domain 802.11a: -A
802.11bg: -A
My question is, should i only include my country in the WLC (IQ) to add the requlatry domain (-E) to solve this problem? or changing the country will affect the operation of all working APs??
Appreciate your kind support,
Wisam Q.

Hi Ramon,
thank you for the reply but as shown in the below link:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7.0.html#wp233793
the WLC in version 7.0.116.0 supports Cisco 1040 seiries APs.
Thanks,
Wisam Q.

How do i bypass the windows password without password recovery disk

My sister has passed away & Ive been copying her pictures off of her laptop for the family & I havent finished. It logged off last night & now its asking for password & no one knows the password.. Im almost positive there is a way to go around this password but I cant seem to figure it out on my own! Please Help ASAP THANX

Here are some common methods.
 
Method 1: Reset Windows 7, Vista, XP Password Via Another Administrator Account
 
If you have another user account with admin privileges, including built-in accounts in Windows 7/Vista/XP, you can easily bypass other accounts' password using Lusrmgr.msc and Command Line.
 
1. Log on Windows 7/Vista/XP with your administrator account. Click on Start, type lusrmgr.msc in the Search box(Win7/Vista) or Run box(Win7/Vista/XP) and click OK.
2. When the Local users and Groups dialog appears, open the Users folder. Right-click your user account and select "set password", type a new password and click OK.
 
Method 2: Reset WIndows 7/Vista/XP password with Windows password reset disk
Here is the steps to reset Windows password with password reset disk, bypassing Windows Vista/XP password is the same as this:
 
Step 1: Login Windows with a incorrect password, it will show you a link "Reset Password.." under the password box.
Step 2: Insert your password reset disk, click the link, When a password reset wizard appears, click Next.
Step 3: Choose the drive name from the pull-down list, click Next.
Step 4: Type a new password in the new password box, and type it again to confirm it. Click Next→Finish. Then you can login Windows again with the new password.
 
Method 3: Reset Windows password with Windows password recovery program
 
In this method, you need to load a recovery program on another computer, then burn it to a CD/USB. Boot your locked computer from CD/USB and reset WIndows password offline. This is a universal password reset method.
[advertising content removed]
 
Hope helpful.

Hp password recovery in windows 8

I just wanted to tell you of a recent experience I had when contacting HP support
I called them yesterday with what I considered to be a simple question I found out that this question in their eyes was not that simple
the question was how do I set Up a password recovery flash drive in Windows 8.
the the person from HP said that he would need to check and would I please give him a minute to do so, when he came back he said that hp computers did not have this option.
I said to him how could this be as windows 8 says you can do this I also said that in windows vista and windows 7 you could do this and Why Would windows 8 Be any different he said he didn't know But this was not an option available hp in windows 8 he also stated
if I were to forget my password would be to install my operating system again. I said to him that it seemed unreasonable that I would have to reinstall my os just to recover my password and the must be a simpler option than that. he said no that would be my only option if I were to ever forget my password. I then said to him I did not believe the information he was giving me was accurate and was he 100% sure of the information he was giving me, he said yes and that he would send me an e-mail giving me step by step instructions. I said okay bye, I did not believe what he was telling me so I went online and found out in about 2 minutes all we needed to do was set this up via the settings screen and user account where it give you the option to make a password recovery usb flash drive I understand that they cannot possibly know everything but I feel if they don't know they should be willing to tell you that they don't know and passed you on to someone who does rather Than making you spend hours reinstalling an operating system that you don't need to. it also seems to me outsourcing technical support to third world countries like in this case india where they may not have a full grasp of some of the finer subtletys of the english language and company like hp dell toshiba and many others need to return technical support to the countrys in which the computers are sold and 1 other thing why is it that we no longer get a set of recovery cds with new computer and have to make a set ourselves when so often in the process of making them some write error happens and you only find out that is there is a problem with them when you come to use them I know companies need to make a profit on the sale of the computers but surely there is enough profit margin for them still to supplie you with the recovery media you need

Hi,
I afraid the pritner is not supported on Windows 8:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03457812&tmp_task=prodinfoCategory&cc=us&dlc=en...
You will not be able to use any other alternative driver with the printer as there are no drivers to allow the PC to communicate with the printer through a USB connection..
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cisco ISE 1.2 vm cli admin password recovery

I'm having trouble getting this to work. I was under the impression by mounting the ISO (connect at power on) i could perform the password recovery like it states for the hardware appliance. However, if i mount the 1.2.0.899 iso image (connect at power) I don't seen to get any options in my vm console? At most, I have a <enter> at the very beginning that will take me to Grub or ADE boot menu... but I don't see anything about options to change the password?

Make sure you are following the steps in the following link:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_postins.html#38674
Also, make sure that the VM Guest is set to boot from DVD/CD first before trying the HDD.
Thank you for rating helpful posts!

I reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

i reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

Click here and use Apple's iForgot service, or contact their Account Security team, or if you're the device's original owner, take it and its purchase receipt to a physical Apple Store.
(124525)

WLC 4402 password recovery

Similar Messages

Maybe you are looking for