WLC 4404-100/ACS 3.2/Windows 2003 ADS/ WLAPP AP1231

Equipments:
1. WLC4404-100
2. AP 1231 WLAPP
3. ACS 3.2
4. Windows 2003 ADS
We want to created dynamic VLANs, based on user's Web login authentication it'll place them to the correct VLAN.
We have one single broadcase SSID "SCHOOL" which faculty, student and guest will use to gain wireless access. I want to use ACS as the management inferface for management.
Please provide any helpful links?
THanks!
~GM

Hi David,
Check this link for AAA override feature which will let you configure dynamic vlans based on user's web login authentication.
http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig40/c40sol.htm#wp1124844
Check this link to configure WEB LOGIN AUTHENTICATION
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml
Check this link to configure basic WLANs
http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig40/c40wlan.htm
To have a look at the complete configuration guide for 4400 controller have a look at this link
http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig40/index.htm
HTH
Ankur
*Pls rate helpfull post

Similar Messages

  • WLC 4404-100 with CAP1550E

    Currently I have a WLC 4404-100 and 96 nos. LWAP 1250 installed at site. I need to add CAP1550E (4 Nos.) to this existing setup. Out of this CAP1550E, 2 needs to be configured as root, and the remaining 2 has to be connected through 802.11a/n backhaul and meshed.
    Can I achieve this scenario, without adding a new controller??
    Thanks to all in advance.....

    jerrick,
    Yes you can. Mesh and non-mesh functionality has been merged for quite some time now. Use more recent code (7.0.x) or higher for best results.
    If you are unfamiliar with configuring mesh, consider spending some time scanning the 7.2 mesh design guide. Mesh works a little bit differently than your traditional local-mode APs and you need to do some additional configuration on the controller to tune it to your environment.
    7.2 Mesh Design Guide: http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.2/design/guide/MeshAP_72.html
    One thing the guide doesn’t say (I don’t think): Get it working on the ground first, then hang your APs. It will save you a lot of time and frustration.
    Justin

  • Unable to install ACS on Microsoft windows 2003 Virtual Server

    Hi,
    I am trying to install Cisco Secure ACS on Windows 2003 Server Standard Edition which is hosted on a Microsoft Virtual Server, but the installation doesnt go beyond the enclosed screenshot.
    Please let me know whether ACS can be installed on a Virtual Server or not.
    thank you
    Regards
    Salim

    We have ACS 4.0 installed in our lab systems on VM. Which VM are you running? ACS has been tested on and is only supported on VMware ESX 3.0 and later. Also, you need to have adequate resources allocated to the ACS/Windows VM instance.

  • Patch/Reboot of AD servers requires restart of ACS 4.2 Windows Service

    We have been experiencing an ACS issue when our Active Directory servers are patch and rebooted. When this is done, the ACS service must be restarted on both our ACS servers. The ACS servers are Windows 2003 with ACS 4.2. Has anyone else experienced this? If so, any solution?

    The ACS will respond to local database queries fine, it is when it relays it to the active directory cluster that it fails. The ACS servers are on different subnets in different data centers, same with the AD servers. I checked the switch ports and have found no errors and no indication of dupe IP’s. In the ACS logs, is see the fail error as either a “External DB user invalid or bad password” or “External DB unknown error”.

  • CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server

    Hi,
    I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
    After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
    1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
    2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
    Any help on these problems will be appreciated.
    Thanks
    Best Regards,
    Ahmed

    Hi Rohit,
    Thanks for reminding the HTTPS option under Administration Control on ACS.
    I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
    Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
    Thanks
    Best Regards,
    Ahmed

  • Cisco aironet 1130g and windows 2003 with cisco ACS

      hi
    i  have configured windows 2003 server with  DNS ,Active directory users and dhcp server.  and configured my cisco 1130g AP .
    i have installed cisco access control server 4.0 because i use LEAP authentication protocol and for the ACS for network configuration i give aaa client ip addresss as AP interface ip and  same shared secret for the AP and ACS,.
    so  when i log to wifi it ask username and password
    problem is lap top cannot have a ip address my dhcp server not issue any ip address .
    my hiper terminal massage is like this when i connect to wifi 
    help ...thank you...

    As I mentioned now several times already, it is the client and ACS which do the PEAP. The Access point doesn't have to be configured for an eap type. What you did on the AP was setting the AP as a radius server which is duplicate work with what you did on ACS.
    So you need on your client to configure either PEAP or LEAP.
    Nicolas

  • Oracle.exe(oralce 10.1)  on Window 2003 is using 100% CPU

    Oracle.exe(oralce 10.1) on Window 2003 is using 100% CPU.
    while using importing. CPU IS PENTIUM 4 AND RAM IS 2G
    any tuning ideas ?

    WEll I just did google for you:
    Take a look at:
    http://www.dba-village.com/village/dvp_forum.OpenThread?ThreadIdA=15940&DestinationA=RSS
    Hope this Helps
    Regards

  • ACS SE no load Cetificate CA Enterprise Windows 2003

    I have an ACS Appliance with integrated Windows 2000 version 4.1.1.23 , I need to implement EAP-TLS in a Domain Windows 2003, the CA that I am using is a "CA 2003". I have read several documents that explain how ask for certificates to the ACS, nevertheless it has not been possible to load in the ACS the certificate emitted by the CA. The certificate generated by the CA has the
    extension *.cer, but the other one *.pvk file is not generated. THIS IS THE MAIN
    PROBLEM.
    I have read and followed every configuration step I found in this Document:
    Cisco Document ID: 64067
    The ACS documentation indicates interoperability with Windows 2003.

    Hi,
    you can use "Generate Certificate Signing Request" in the appliance System configuration page, to request a Certificate from your CA.in the field Private Key file put o name with the extention .pvk and type a password.when you will have the certificate from the CA, download it to your ACS Appliance,you don't need to download the Private key, it's stored in the Appliance, just put the name that you've entred in the first phase of generating a CSR.
    I hope that it will help you.
    Ismail

  • NTLM is not working with EP 6 SP 9 on Windows 2003 with IIS 6.

    I installed EP 6 SP 9 on windiows 2003 server with IIS version 6.
    Configures IisProxy.xml for redirection for filter irj. When  I make a call to default website, it in turn calls server with irj filter.
    Portal page comes up and requesting me to enter user id password.
    I made the changes mentioned by some of the web logs in this site.
    I configured HeaderVariableLoginModule an and added as explined by Gregory Wolf on the following topic.
    Integrated Windows Authentication with SAP EP 6.0 SP 3 and higher.
    I see following log from Ep 6 SP 9 log file security.log from directory E:\usr\sap\DEV\JC00\j2ee\cluster\server0\log\system.
    security#Plain###No user name provided.#
    #1.5#000C2953326B00430000000100000A780003F358EF2132DE#1111988099323#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####200d0cb09f4b11d9926a000c2953326b#SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1#com.sap.engine.services.security#Plain###Cannot log info about the logon attempt because the user name is null.#
    #1.5#000C2953326B00440000000000000A780003F3591D22E168#1111988846027#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####dd1f09b19f4c11d98e98000c2953326b#SAPEngine_Application_Thread[impl:3]_7##0#0#Info#1#com.sap.engine.services.security#Plain###No user name provided.#
    #1.5#000C2953326B00440000000100000A780003F3591D22E215#1111988846027#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####dd1f09b19f4c11d98e98000c2953326b#SAPEngine_Application_Thread[impl:3]_7##0#0#Info#1#com.sap.engine.services.security#Plain###Cannot log info about the logon attempt because the user name is null.#
    #1.5#000C2953326B00450000000000000A780003F359227DE92E#1111988935662#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####128c40e09f4d11d9acb7000c2953326b#SAPEngine_Application_Thread[impl:3]_28##0#0#Info#1#com.sap.engine.services.security#Plain###No user name provided.#
    #1.5#000C2953326B00450000000100000A780003F359227DEDC7#1111988935662#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####128c40e09f4d11d9acb7000c2953326b#SAPEngine_Application_Thread[impl:3]_28##0#0#Info#1#com.sap.engine.services.security#Plain###Cannot log info about the logon attempt because the user name is null.#
    Lots of weblogs are pointing to remote_user value in IisProxy.log file. I am not able to see that.
    I also tried switching IIS 6 to run as IIS 5 and did not help much at all.
    Please help me on the issue.
    I did not change authschemes.xml file.
    My IisProxy.xml file looks as follows:
    <?xml version="1.0" encoding="utf-8" ?>
    <!DOCTYPE ISAPI-config[
         <!ELEMENT ISAPI-config ( filter, extension, ( mapping | config )* )>
         <!ATTLIST ISAPI-config
              version CDATA #REQUIRED
         >
         <!ELEMENT filter (log-path?)>
         <!ATTLIST filter
              name CDATA #IMPLIED
              log-level CDATA "3"
              log-flags CDATA "0x00000001"
              debug-flags CDATA "0x00008000"
              priority ( high | medium | low ) "high"
              extension-url CDATA "/scripts/IisProxy.dll"
              authentication ( skip | normal | forward ) "normal"
              remote-address ( skip | forward ) "skip"
         >
         <!ELEMENT extension (
              keystore-dir?,
              log-path?,
              data-path?,
              trace-path? )>
         <!ATTLIST extension
              name CDATA #IMPLIED
              log-level CDATA "1"
              log-flags CDATA "0"
              debug-flags CDATA "0"
              access ( filter | direct | both ) "filter"
         >
         <!ELEMENT keystore-dir (#PCDATA)>
         <!ELEMENT log-path (#PCDATA)>
         <!ELEMENT data-path (#PCDATA)>
         <!ELEMENT trace-path (#PCDATA)>
         <!ELEMENT mapping (
              source+,
              target,
              compress-types*,
              protocol-header?,
              certificate-header?,
              cert-chain-header?,
              cipher-header?,
              keysize-header?,
              keystore-path?,
              log-path?,
              data-path? )>
         <!ATTLIST mapping
              name CDATA #IMPLIED
              log-level CDATA "1"
              log-flags CDATA "0"
              debug-flags CDATA "0"
              keep-alive ( true | false ) "true"
              use-continue ( true | false ) "true"
              close-socket ( true | false ) "true"
              close-socket-delay CDATA "1000"
              thread-count CDATA "100"
              max-socket-age CDATA "37"
         >
         <!ELEMENT source (protocol, host?, port?, prefix, new-prefix?)>
         <!ATTLIST source
              access ( filter | direct | both ) "filter"
         >
         <!ELEMENT protocol (#PCDATA)>
         <!ELEMENT host (#PCDATA)>
         <!ELEMENT port (#PCDATA)>
         <!ELEMENT prefix (#PCDATA)>
         <!ELEMENT new-prefix (#PCDATA)>
         <!ELEMENT target (protocol, host, port)>
         <!ELEMENT compress-types (#PCDATA)>
         <!ATTLIST compress-types
              min-size CDATA "1024"
         >
         <!ELEMENT protocol-header (#PCDATA)>
         <!ELEMENT certificate-header (#PCDATA)>
         <!ELEMENT cert-chain-header (#PCDATA)>
         <!ELEMENT cipher-header (#PCDATA)>
         <!ELEMENT keysize-header (#PCDATA)>
         <!ELEMENT keystore-path (#PCDATA)>
         <!ELEMENT config ( source+ )>
    ]>
    <ISAPI-config version="1.6">
         <filter name="IisProxy filter"/>
         <extension name="IisProxy extension" />
         <mapping name="IisProxy samples">
              <source>
                   <protocol>http</protocol>
                   <prefix>/irj</prefix>
              </source>
              <source>
                   <protocol>http</protocol>
                   <prefix>/Hello/</prefix>
              </source>
              <source>
                   <protocol>http</protocol>
                   <prefix>/Hello2/</prefix>
                   <new-prefix>/Hello/</new-prefix>
              </source>
              <target>
                   <protocol>http</protocol>
                   <host>slcsepw04vd.pacificorp.us</host>
                   <port>50000</port>
              </target>
              <compress-types>text/html, text/plain</compress-types>
         </mapping>
         <mapping name="Secure IisProxy samples">
              <source>
                   <protocol>https</protocol>
                   <prefix>/Hello/</prefix>
              </source>
              <target>
                   <protocol>https</protocol>
                   <host>localhost.your.corp</host>
                   <port>8443</port>
              </target>
              <keystore-path>c:\sec\SAPSSLC.pse</keystore-path>
         </mapping>
         <config>
              <source>
                   <protocol>http</protocol>
                   <host>localhost</host>
                   <prefix>/IisProxy</prefix>
              </source>
              <source>
                   <protocol>https</protocol>
                   <host>localhost</host>
                   <prefix>/IisProxy</prefix>
              </source>
         </config>
    </ISAPI-config>
    Please help me. I am not sure what is missing. Please make a note that Portal version is EP 6 SP9 & Server is Windows 2003 with IIS 6.

    I made the change as you requested and it did not help.
    I do not see any remote_user entry in IisProxy.log file.
    Please let me know the procedure to get REMOTE_USER into the IisProxy.log file.
    <?xml version="1.0" encoding="utf-8" ?>
    <!DOCTYPE ISAPI-config[
         <!ELEMENT ISAPI-config ( filter, extension, ( mapping | config )* )>
         <!ATTLIST ISAPI-config
              version CDATA #REQUIRED
         >
         <!ELEMENT filter (log-path?)>
         <!ATTLIST filter
              name CDATA #IMPLIED
              log-level CDATA "3"
              log-flags CDATA "0x00000001"
              debug-flags CDATA "0x00008000"
              priority ( high | medium | low ) "high"
              extension-url CDATA "/scripts/IisProxy.dll"
              authentication ( skip | normal | forward ) "normal"
              remote-address ( skip | forward ) "skip"
         >
         <!ELEMENT extension (
              keystore-dir?,
              log-path?,
              data-path?,
              trace-path? )>
         <!ATTLIST extension
              name CDATA #IMPLIED
              log-level CDATA "1"
              log-flags CDATA "0"
              debug-flags CDATA "0"
              access ( filter | direct | both ) "filter"
         >
         <!ELEMENT keystore-dir (#PCDATA)>
         <!ELEMENT log-path (#PCDATA)>
         <!ELEMENT data-path (#PCDATA)>
         <!ELEMENT trace-path (#PCDATA)>
         <!ELEMENT mapping (
              source+,
              target,
              compress-types*,
              protocol-header?,
              certificate-header?,
              cert-chain-header?,
              cipher-header?,
              keysize-header?,
              keystore-path?,
              log-path?,
              data-path? )>
         <!ATTLIST mapping
              name CDATA #IMPLIED
              log-level CDATA "1"
              log-flags CDATA "0"
              debug-flags CDATA "0"
              keep-alive ( true | false ) "true"
              use-continue ( true | false ) "true"
              close-socket ( true | false ) "true"
              close-socket-delay CDATA "1000"
              thread-count CDATA "100"
              max-socket-age CDATA "37"
         >
         <!ELEMENT source (protocol, host?, port?, prefix, new-prefix?)>
         <!ATTLIST source
              access ( filter | direct | both ) "filter"
         >
         <!ELEMENT protocol (#PCDATA)>
         <!ELEMENT host (#PCDATA)>
         <!ELEMENT port (#PCDATA)>
         <!ELEMENT prefix (#PCDATA)>
         <!ELEMENT new-prefix (#PCDATA)>
         <!ELEMENT target (protocol, host, port)>
         <!ELEMENT compress-types (#PCDATA)>
         <!ATTLIST compress-types
              min-size CDATA "1024"
         >
         <!ELEMENT protocol-header (#PCDATA)>
         <!ELEMENT certificate-header (#PCDATA)>
         <!ELEMENT cert-chain-header (#PCDATA)>
         <!ELEMENT cipher-header (#PCDATA)>
         <!ELEMENT keysize-header (#PCDATA)>
         <!ELEMENT keystore-path (#PCDATA)>
         <!ELEMENT config ( source+ )>
    ]>
    <ISAPI-config version="1.6">
         <filter name="IisProxy filter" authentication="forward"/>
         <extension name="IisProxy extension" />
         <mapping name="IisProxy samples">
              <source>
                   <protocol>http</protocol>
                   <prefix>/irj</prefix>
              </source>
              <source>
                   <protocol>http</protocol>
                   <prefix>/Hello/</prefix>
              </source>
              <source>
                   <protocol>http</protocol>
                   <prefix>/Hello2/</prefix>
                   <new-prefix>/Hello/</new-prefix>
              </source>
              <target>
                   <protocol>http</protocol>
                   <host>slcsepw04vd.pacificorp.us</host>
                   <port>50000</port>
              </target>
              <compress-types>text/html, text/plain</compress-types>
         </mapping>
         <mapping name="Secure IisProxy samples">
              <source>
                   <protocol>https</protocol>
                   <prefix>/Hello/</prefix>
              </source>
              <target>
                   <protocol>https</protocol>
                   <host>localhost.your.corp</host>
                   <port>8443</port>
              </target>
              <keystore-path>c:secSAPSSLC.pse</keystore-path>
         </mapping>
         <config>
              <source>
                   <protocol>http</protocol>
                   <host>localhost</host>
                   <prefix>/IisProxy</prefix>
              </source>
              <source>
                   <protocol>https</protocol>
                   <host>localhost</host>
                   <prefix>/IisProxy</prefix>
              </source>
         </config>
    </ISAPI-config>
    Please let me know what is missing.
    Thanks.

  • Error while Installing R12.1.1 on Windows 2003 Enterprise Edition

    Dear All,
    I am installing R12.1.1 on Windows 2003 Enterprise Edition Server. I am using the media source that i have downloaded from Oracle Edelivery. I have done a MD5Sum check on the dowloaded files based the MD5SUM Check details given in site. (Not after staging).
    I have the stage files in the same partition as the partition in which the OS & Oracle is being installed (Free space is 300GB after staging)
    When the Installation reaches 53%, the installation fails with the following Error: "RW-50004: Error code received when running external process. Check log file for details. Running APPL_TOP Install Driver for VIS Instance"
    Log File:
    =====================
    e:\oracle\VIS\inst\apps\VIS_r12\logs\03021433.log
    ================================
    Processing Step 3 of 5
    Executing: e:\oracle\VIS\inst\apps\VIS_r12\temp\adrunias.cmd
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
    Statusstring Registering Applications Technology Stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | D:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -stage D:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
    Log file located at e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ApplyAppsTechStack_03021625.log
    **** truncated *************
    - 3% completed
    \ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
    RC-50013: Fatal: Failed to instantiate driver e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
    Cannot execute registration of Applications Techstack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running APPL_TOP Install Driver for VIS instance
    ApplyAppsTechStack_03021625.log
    =========================
    Started ApplyAppsTechStack at Wed Mar 02 16:25:21 IST 2011
    Version:
         ApplyAppsTechStack.java     :      120.23
    Executing home registration for s_weboh_oh...
    Registering using Registration Driver
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg1013.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl
    setting permissions: 700
    Executing script in InstantiateFile:
    e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    script returned:
    Timed out( 3750000 ): Interrupted Exception
    Beginning OUI CLI cloning for s_weboh_ohWed Mar 2 16:25:24 2011
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;e:\oracle\VIS\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -nolink -oaVar s_weboh_oh -homestub weboh -log e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ohclone.log
    running OUI CLI home cloning:
    e:\oracle\VIS\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=e:\oracle\VIS\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_r12_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_r12_WEBOH -J-Doracle.installer.noLink=true
    Executing script in InstantiateFile:
    e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    script returned:
    .end std out.
    .end err out.
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli0.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg10130.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl0
    setting permissions: 700
    e:\oracle\VIS\inst\apps\VIS_r12\admin\log\adcvmlog.xml does not exist. Ignore it
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [APPLY PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
    ouicli.pl INSTE8_APPLY -1
    AutoConfig is exiting with status 1
    RC-50013: Fatal: Instantiate driver did not complete successfully.
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    I have gone through the meta link document [989752.1]. But I feel that document does not apply to me as i am not running the installation from a network storage area.
    Pl. help me.
    Thanks and regards,
    Adm.

    AN Update:
    The Oracle Universal Installer shows the following in the screen before the error appears:
    Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
    ill be executed.
    Preparing to launch Oracle Universal Installer from D:\DOCUME~1\ADMINI~1\LOCALS
    ~1\Temp\OraInstall2011-03-02_04-25-26PM. Please wait ... Oracle Universal Instal
    ler, Version 10.1.0.6.0 Production
    Copyright (C) 1999, 2007, Oracle. All rights reserved.
    ...............................................................Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    path: D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\jre\bin
    ;.;D:\WINDOWS\system32;D:\WINDOWS;D:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;D:
    \MVS\VC\bin;D:\cygwin\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbe
    m
    toload is D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\Win
    dowsGPortQueries.dll
    100% Done.
    Copying files in progress (Wed Mar 02 16:25:59 IST 2011)
    .................................................Val: 0
    . 79% Done.
    Copy successful
    Setup in progress (Wed Mar 02 16:26:05 IST 2011)
    .....Oracle JAAS [Wed Mar 02 16:26:28 IST 2011]: exception: 9
    opmnctl: opmn started
    Please help me.
    Thanks and regards,
    Adm

  • Problems with Active Directory and Windows 2003

    Hello,
    I'm using Mac OS X Server 10.4.9 with Active Directory bound to a Windows 2003 Active Directory Domain. I can bind successfully to the domain using the graphical interface. Then in Samba I can access shared directories using Windows users. However, after some time somehow there are problems and Windows users aren't authenticated anymore on the Mac. I've looked at the firewall and there are no denied packets from the Mac. There are two servers in the domain, all clocks are synchronized and domain information is up to date. When I unbind the Mac, I can see the machine account being deleted on both domain servers and created too on both machines when I bind to the domain.
    Problems occur when I try login in using ssh or samba do I think this is a problem with the AD module.
    I turned on debugging messages on DirectoryServices:
    sudo killall -USR1 DirectoryService
    When in Windows, using the Administrator user I try:
    net use \\10.0.0.1 /user:domain\Administrator
    Where 10.0.0.1 is the Mac.
    In the Mac I get from
    tail -f /Library/Logs/DirectoryService/DirectoryService.debug.log |grep ADPlug
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling OpenDirNode
    2007-06-27 10:48:38 CDT - ADPlugin: Opening Specific Node domain.com.mx
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling CloseDirNode
    2007-06-27 10:48:42 CDT - ADPlugin: Calling OpenDirNode
    2007-06-27 10:48:43 CDT - ADPlugin: Opening Specific Node domain.com.mx
    2007-06-27 10:48:43 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Calling GetRecordList Routine
    2007-06-27 10:48:43 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:43 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:43 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:43 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:43 CDT - ADPlugin: Calling CloseDirNode
    I really don't know what to do. The Windows Event log shows no messages. The link used to work and there have been no changes in the domain servers.
    The key line seems to be:
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    But I don't know what that ADSEngine.mm is.
    XServe G5   Mac OS X (10.4.9)  

    Hello.
    Thanks for your reply.
    I tried the net use with a drive letter with and without the /user switch. When I use a domain user domain\user1 I can't connect. When I use a user local to the XServe it works.
    When I use
    net use x: \\10.0.0.1\share /user:domain\user1
    I get prompted for a password, but it doesn't work.
    I checked the firewall and all packets to or from the mac are accepted, no denied or dropped packages.
    I already went through the MS document on fw ports. Before I opened to Kerberos ports the binding failed. No the binding work OK.
    Some users who were authenticated yesterday still can access files using the Windows domain accounts. It's new users trying to connect those who have problems.
    This is what the Samba log.smbd log shows:
    [2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2007/07/04 14:58:46, 0] /SourceCache/samba/samba-100.7/samba/source/auth/authutil.c:make_server_infoinfo3(1138)
    makeserver_infoinfo3: pdbinitsam failed!
    [2007/07/04 14:58:46, 0] pdbods.c:odssamgetsampwnam(2329)
    odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'user1'!
    [2007/07/04 14:58:46, 2] /SourceCache/samba/samba-100.7/samba/source/auth/auth.c:checkntlmpassword(367)
    checkntlmpassword: Authentication for user [user1] -> [user1] FAILED with error NTSTATUS_NO_SUCHUSER
    This is what the DS log shows:
    2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Calling GetRecordList Routine
    2007-07-04 14:58:46 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-07-04 14:58:46 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-07-04 14:58:46 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=user1)(sAMAccountName=user1)(displayName=user1)( mail=user1)(userPrincipalName=user1)(userPrincipalName=user1@*)))
    2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-07-04 14:58:46 CDT - ADPlugin: Returning 0 Results
    2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Put 0 records in Buffer for RecordList
    XServe G5   Mac OS X (10.4.9)  

  • Oracle 10G slow Performance on Windows 2003 Server

    Hi there,
    Looking for a little assistance in locating a bottleneck that's started to hit our system this week. It's really odd because it's been starting around 10am every morning this week.
    today is the worst that I've seen it because it's almost brought the system to a halt.....
    We're running Oracle 10.2.0.1 64b on Windows 2003 Server 64
    The server has 16 processors and 64GB of RAM currently the CPU is sitting at 5% and the RAM usage is at 16.4GB
    It's a blade server with a SAN backend and I'm assuming the latency is coming from the disk but I need to determine this for a fact.
    I've only been a DBA for about a year and I'm stilling learing how to locate and identify issues. According to OEM I'm seeing
    a ton of I/O from the users. So anyways, any help or insight would be much appreciated and a learning experience for me.
    Thank you for your time and asistance.
    SB

    Thank you for the reply!
    We've had finding one FOREVER, I can't resolve it and I've read somewhere to ignore because OEM is false reporting. I'm adjusting DB_Cache now...
    Isn't possible that too much cache could be bad for the system and cause slow downs?
    FINDING 1: 100% impact (29725 seconds)
    Significant virtual memory paging was detected on the host operating system.
       RECOMMENDATION 1: Host Configuration, 100% benefit (29725 seconds)
          ACTION: Host operating system was experiencing significant paging but no
             particular root cause could be detected. Investigate processes that
             do not belong to this instance running on the host that are consuming
             significant amount of virtual memory. Also consider adding more
             physical memory to the host.
       RECOMMENDATION 2: DB Configuration, 100% benefit (29725 seconds)
          ACTION: Consider enabling Automatic Shared Memory Management by setting
             the parameter "sga_target" to control the amount of SGA consumed by
             this instance.
    FINDING 2: 51% impact (15210 seconds)
    The buffer cache was undersized causing significant additional read I/O.
       RECOMMENDATION 1: DB Configuration, 9% benefit (2685 seconds)
          ACTION: Increase the buffer cache size by setting the value of parameter
             "db_cache_size" to 7568 M.
       ADDITIONAL INFORMATION:
          The value of parameter "db_cache_size" was "6912 M" during the analysis
          period.
       SYMPTOMS THAT LED TO THE FINDING:
          SYMPTOM: Wait class "User I/O" was consuming significant database time.
                   (84% impact [25073 seconds])

  • SCEP on ISE 1.2 and Windows 2003 Server

    Hi there
    has anyone ever be able to get SCEP on ISE 1.2 working with Windows 2003 Server? I know Cisco recommends Windows 2008 Server onwards, but sometimes the server infrastructure is not yet there.
    Thanks in advance and best regards
    Dominic

    Hmm, good question that I would also like to know the answer to. All of my deployments have been either 2008 or 2012. I believe long time ago I got it working in my lab with 2003 but then my 2003 server blew up so when I re-created it I did it with 2008. However, I cannot confirm 100% and even if it was true it was not in a full production environment. So it would be nice if someone else can chime in here. 
    I did come across this though that would suggest that it is supported with some tweaks:
    http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_ISE.html
    Windows Server 2003, Microsoft SCEP (MSCEP) required a Resource Kit add-on to be installed on the same computer as the CA. In Windows Server 2008, MSCEP support has been renamed NDES and is part of the operating system. NDES may be installed on a different computer than the CA (http://technet.microsoft.com/en-us/library/cc753784%28WS.10%29.aspx).
    Thank you for rating helpful posts!

  • Windows 8.1 Professional users from a Windows 2003 domain to Microsoft IDs

    We've had a Windows 2003 domain for about 10 years. The original reason we created the Windows 2003 domain is no longer valid. (SQL Server integrated security)
    We would like to convert the domain user profiles on the Windows 8.1 boxes to user profiles associated with Microsoft ID's.
    I tested http://www.forensit.com/domain-migration.html but did not have good results. The challenge was the functionality provided by doing Windows Key + W and entering commands such as user, etc did not work. (ie: the store was messed
    up)
    So I am thinking the best way to do this is to convert the domain users to local users and then convert the local users to Microsoft ID users. I believe the conversion from local users to Microsoft ID users is native to Windows 8.1.
    Questions:
    1) Is the Windows 8.1 conversion from local users to Microsoft ID users reliable?
    2) What is the best method to convert a domain user provide to a local user profile on Windows 8.1?
    Thank you in advance for any assistance you may provide.
    Thank you, Bill

    Karen & Milos,
    Thank you for your assistance on this matter.
    Unfortunately, Windows 8.1 Store Apps represent such a massive change in architecture that I don't believe anyone can be 100% positive that copying user profiles will work properly.
    In summary, I've tried the following:
    1) User Profile Wizard v3.7 from Forensit.com - this was the closest but the Windows Store Apps did not work properly
    2) USMT v5.0 - missed many folders and settings
    3)
    http://www.shofkom.com/2009/03/14/how-to-convert-your-domain-profile-to-a-local-profile/ - had to reconfigure many applications and the Start screen and Task bars were not set properly
    4) Variations of
    http://www.nextofwindows.com/how-to-change-user-profile-location-in-windows-8-without-registry-hack/ - same as #3
    5)
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/fac17d6a-3c1b-4188-913e-ac2ec45b3ad6/transferring-from-workgroup-to-domain-keeping-user-profile?forum=winservergen - same as #3
    In summary, I've decided to create the Local User as a Microsoft ID and then manually copy the Documents, Pictures, Downloads, Music, Pictures and Videos. The other settings such as Outlook, Startup, Task Bar, Desktop, and other app settings will be manually
    configured. :-(
    Thank you, Bill

  • Running Windows 2003 Server on Xserve Intel with BootCamp?

    Well...
    This sounds like awfully bad idea, but one of our clients needs to run Windows 2003 Server for a certain project in their organisation. Fundings for the new hardware is available. Windows-compatible hardware!
    The idea here is to get fundings for a new Xserve, run it with Windows 2003 Server in the project and then keep the delicious hardware for free when the project ends. A PC-server would be thrown out of a window in this 100% Mac-centric department.
    Windows 2003 Server runs smoothly on a MacPro with Boot Camp and Parallels Desktop. What about the XServe Intel?

    Schuckert-
    Greetings.
    Are you in a position to test the configuration for a while? If so then I vote do it. If not, you could buy a copy of OSX Server and install it on a Mac Pro and try running your software on the XServe platform.
    However, depending on your relationship with this client, I would have them sign a release based upon the beta-ness of the software.
    A lot of us here are not in a position to give such things a try-just yet. Too busy trying to make things transition smoothly on the accepted configurations.
    Although I will say that I suppose a client will eventually pose the question to me (:>)
    Luck-
    -DaddyPaycheck

Maybe you are looking for

  • Creating a zone

    The output from # zoneadm list -vc ID NAME STATUS PATH 0 global running / - psql-zone incomplete /opt/home/srao/psql-zone I can't delete this zone as posted earlier. Now I tried to configure the same as shown. # zonecfg -z psql-zone psql-zone: No suc

  • I updated itunes (10/12/13) to imac and now itunes will not open

    I updated my imac with the new update for itunes (10/12/13).  Now iTunes will not open at all

  • Extreme & Express Best Configuration

    I have an existing Wireless Network with an ADSL modem plugged into an Airport Express. The Airport Express was originally setup with the Create Network option. I have just bought an Airport Extreme and added it to the existing network by simply usin

  • ORA-13207: incorrect use of the [More than 2D not supported] operator

    Oracle 8.1.7.4: The same query works in an Oracle DB on Linux and Windows, but in a Solaris it gives me the following error: cc_redes_met_coaxial@ORAG2> SELECT lot_f.lot_id id, ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0

  • Copier vers Excel les données d'un tableau utilisant Building Tables.vi

    Comment copier vers Excel les données issues d'un tableau utilisant le modèle Building Tables.vi:la fonction copie données (clic droit dans la face avant de Labview ne me propose qu'une copie de fichier image bitmap (on ne peut rentrer les données da