WLC 5.2.193.0 with WCS 6.0.132.0 a supported config?
I know of a large site (not one of mine) that is running WLC 5.2.193.0 code paired up with WCS 6.0.132.0. The release notes for each product make no mention of support for this configuration.
Is this is supported configuration?
Thanks to both of you who replied. I just need to ensure that Cisco will support this scenario. The larger site is actually a "parent" site, and we try to keep our configs in parallel, but I'm not going to put the smaller site into an unsupported configuration.
I found this document, updated September 1st, which still doesn't list WLC 5.2.193.0 and WCS 6.0.132.0 as a supported config:
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080af7140.shtml
Similar Messages
-
WCS 6.0.132.0 Error
Hi,
I have a problem with WCS 6.0.132.0.
I get every time I press a link a popup with error: "System Error: Wrong Alarm Type rogueUnclassifiedMinor"
Is this a bug?
Any idea to solve this?
Thanks in advanceHi Juan,
This bug was supposed to be fixed, but it looks like it may have crept back in 6.x;
CSCsr02317 Bug Details
Getting error message for alarm dashboard after upgrade from D3MR2 to F
Symptom:
Receive error popup constantly that states the following:
System Error: Wrong Alarm Type rogueUnclassifiedMinor
Conditions:
After upgrading the WCS this happens
Workaround:
Clear the browser cache and cookies. Then restart browser and the error message should go away. Status
Fixed
Severity
4 - minor
Last Modified
In Last Year
Product
Cisco Wireless Control System
Technology
1st Found-In
5.1(63.0)
5.1(65.4)
Fixed-In
5.2(44.0)
Hope this helps!
Rob -
Rogue AP - Not in sync with WCS and WLC
WCS - 7.0.164.0 and WLC - 7.0.98.0.
For some reason, I am seeing rogue ap alert on WLC and am not seeing on WCS. How do I clean up database and sync with WCS and WLC.
I am seeing same thing with coverage holes.
- Allen -Allen,
On the WLC go to Management > SNMP > Trap Controls, make sure that you have the traps checked.
HTH,
Steve
*Please remember to rate helpful posts* -
How to monitor traffic and associations per AP with WCS?
Hi,
is there a way to get traffic and client access/associations data with WCS for each AP of a centrally managed WLAN?
I manage a campus WLAN with a 4402 WLC (software version 6.0.188.0) and a WCS version 6.0.170.0 .
WCS provides me detailed information on a client basis: I'm able to know the association history of each client currently
connected, both which AP the client has connected to, and how much traffic the client has generated/received for each connection.
I hadn't find a way to get the same information on an AP basis. Namely, which clients have been connected, and how much traffic
has been transmitted per time slot.
I suppose this is just a matter of making a different query to the WCS database, since the data are the same used for providing
the information on the client association and traffic history. Though, I haven't find a way on WCS to get this information.
Thanks a lot in advance for any help, cheers,
PieroUse the client reports from WCS reporting:
http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0reps.html#wp1134645
The Client Summary report contains four sub reports. Each of them can be independently customized. The following information is default information available from a Client Summary report depending on the customizable report selected:
•Number of Sessions
•Number of Total Users
•Number of Unique Users
•Number of New Users
•Number of Unique APs
•Number of Users per AP
•Total Traffic (MB)
•Average Traffic per Session (KB) and per user (in KB)
•Total Throughput (Mbps)
•Average Throughput per Session and per user (Mbps)
•Protocol—802.11a/n or 802.11b/g/n.
•SSID—The user-defined Service Set Identifier name
•VLAN
•Vendor
•User Count
•Time Used (Minutes)
•Traffic (MB)
•Session Count
•% of Users
•% of Time
•% of Traffic
•% of Session
•Total Time of a session -
Problem with WCS Audit status missmatch after upgrade
We had problem with wcs Audit status missmatch after upgrade to 7.0.164.3 WLC : 6.0.188.0.
how I can fix the problem?Hi,
Try pinging the WCS from the WLC and vice versa and then try again to refresh config from controllers.. then follow the below if its still not happening..
Please forwrd the trace level logs from the WCS (Specifically WCS0.0.TXT logs) while recreating the issue!!
Regards
Surendra -
Problem with WCS, with an error message (Error: Object not found in device)
I have a problem with WCS, I can not open the window monitor / controllers with an error message (Error: Object not found in device) -> https: / / 10.19x.xxx.xx/webacs/switchDetailAction. do? ControllerID = 23735
by cons I can open the window configures / controllers -> https: / / 10.19x.xxx.xx/webacs/switchGeneralAction.do? command = detail & ControllerID = 23735
Is there a way to recreate the database or the object? thank you in advancethank you for your help
Unfortunately, the command "refresh config from controller" does not solve the problem because we have a negative result
(in mode retain or in mode delete) with the following logs :
Log file wcs-0-0.log
10/19/10 12:07:16.333 ERROR[snmpmed] [23] Response VarBind missing for class InterfaceConfig attribute isInterfaceWired
Log file tomcat_localhost_access_log
10.197.xxx.xx - - [19/Oct/2010:12:07:16 +0000] "POST /webacs/switchListCommandAction.do HTTP/1.1" 200 47399
10.197.xxx.xx- - [19/Oct/2010:12:07:16 +0000] "GET /webacs/alarmSummaryAction.do?command=summary&dojo.preventCache=1287490037130 HTTP/1.1" 200 421 -
[WLC - CWA] [ISE] Wlan Portal with Local Switiching
Description: Guest Portal ISE (WLAN) in a Flexconnect local switching enviorment.
Problem: The communication stops everytime we turn on the feature Radius NAC on the WLC.
We are trying to use Central WebAuth in a Flexconnect environment and with so the procedure that we are using it´s the one that´s available in the cisco DOCS ( http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116087-configure-cwa-wlc-ise-00.html ) but there´s something occuring in my setup. I´ve configured step by step the WLC and ISE in accordance with previous DOC but I can´t establish communication everytime I turn on the feature RADIUS NAC in the WLC.
All the ACL´s were configured, I can see the ISE policy beeing sent to the client but when the PC tries to establish the connection to him nothing leaves the PC ( a simple ping was done ). I´ve tried a bunch of setups to see if it was a misconfiguration or something else but at the end , everytime I trun on the NAC feature the final client looses all the comms to anywere.
You can see in the following attachment the setup of WLC, and AP with flexconnect groups (I´ve also tried without a group but the final result was the same)
We are using a WLC 5500 with 7.6.120.0 ( http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76.html ) and the only thing I can foun is a simple note stating,
"Flex local switching with Radius NAC support is added in Release 7.2.110.0. It is not supported in 7.0 Releases and 7.2 Releases. Downgrading 7.2.110.0 and later releases to either 7.2 or 7.0 releases will require you to reconfigure the WLAN for Radius NAC feature to work."
In the Flexconnect Feature Matrix the RADIUS NAC is supported in a local switching enviorment ( http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112042-technote-product-00.html?referring_site=RE&pos=3&page=http://www.cisco.com/c/en/us/support/docs/wireless/flex-7500-series-wireless-controllers/113605-ewa-flex-guide-00.html) but what we´ve found out so far it´s the other way around.
Another thing that we´ve found is that in the version 7.4 configuration guide ( http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_0110100.html#ID2372 ) cisco says that the "FlexConnect local switching is not supported."
So, after seeing several docs my question is: Does Cisco support Radius NAC in a local switching environment ?Viten,
tnx for the quick reply but,
a) what do you mean by webauth ( http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116087-configure-cwa-wlc-ise-00.html) ?
b) When I say comms stop is that I´m simple using ping as a test to see what happens in the client.Whenever I activate the radius feature the final client (laptop) ceases all comms in a local switching environment.
BR,
DS -
Update SNMP to v3 on WLCs. Update also required on WCS?
Hi all,
I need to update the SNMP version on our WLCs to v3, using MD5 and aes128. This looks easy enough to do:
Management > SNMP > SNMP v3 users > new
From here i can add a new user (ie SNMPV3) and set MD5 and aes128 passwords. I will update our monitoring software to match the SNMP version and credentils, and our monitoring of the WLCs will then run under SNMP v3.
However, we also use a WCS to manage the WLCs (we use templates for wireless key changes etc)
I suspect i will need to update the SNMP details on here too, PER WLC ?
Configure > Controllers > (IP of specific WLC) > Properties > SNMP Properties
Within here i believe i need to add the MATCHING SNMPv3 credentials that i added to the WLC in queston, presumably so the WCS can still talk to the WLC..? Is this correct, or is there more than this that is required?
I also assume that any SNMP update on the WLCs and WCS will NOT impact the APs, because they chat to the WLCs via LWAPP and *not* SNMP...?
Thoughts appreciated,
Thanks in advance!You are quite correct. You will need to update the v3 user on the WCS per WLC. And yes, it will not affect the AP.
Cheers,
Steve
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
WCS 4.2: Will Fluke spectrum Analyzer work with WCS?
Does anyone know if WCS can use (as a Spectrum Expert) Fluke's Spectrum Analyzer software (The same OEM as Cognio)?
thanks. Please clarify: is that Contact Center Express or Cisco Compatible Extensions, And how do either one of those show me if a spectrum analyzer with interface with WCS (added into the WCS interface as a SA)?
I can find no 'page' that has that info. -
Blocking a MAC address with WCS
I recently deployed a 4404 with WCS and want to block a MAC address from connecting to our wireless because of Deauth floods. We have around 40 APs. I am thinking it should be done through a template, but not sure. Can anyone lead me to right document that explains the process of blocking specific MAC addresses?
thanks,
JonathanHi Jonathan,
Have you see this doc;
Configuring a MAC Filter Template
Cisco Wireless Control System Configuration Guide, Release 4.0
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7273.html#wp1068145
Hope this helps!
Rob
Please remember to rate helpful posts..... -
Can't add Controller over VPN in WCS v6.0.132.0
Hi
I use WCS v6.0.132.0 to manage my 4402 and 2106 controller both running version 6.0.182.0
When I try to add another 2106 over DM-VPN it fails with the following errors:
”No response from device, check SNMP communities, version or network for issues”
If I move the new 2106 controller to LAN with same config there is no problem.
I found this note in the in “Cisco Wireless Control System Configuration Guide, Release 6.0”
“Note If you are adding a controller into WCS across a GRE link using IPsec or a lower MTU link with multiple fragments, you may need to adjust the MaxVar Binds PerPDU. If it is set too high, the controller may fail to be added into WCS. To adjust the MaxVarBindsPerPDU setting, do the following:
1) Stop WCS.
2) Go to the location of the Open SnmpParameters.properties file on the server that is running WCS.
3) Edit MaxVarBindsPerPDU to 50 or lower.
4) Restart WCS.”
On my system I have the “SnmpParameters.properties” file is located //WCS6.0.132.0\webnms\classes\com\cisco\server\resources
But I don’t have “MaxVarBindsPerPDU” settings in the file.
Beside some # explanations text, the only settings I have in the “SnmpParameters.properties” file is:
DebugEnabled false
SerializeRequests true
MaxRepetitions 10
MaxRetryTimeout 60
WlanTimeoutMsecsPerAP 50
I have tried to add “MaxVarBindsPerPDU” settings, but it have no effect.
Anyone have an idea what to do?
TIAThank you so much!
Step 1 solved the issue.
I changed “Maximum VarBinds per Get PDU” from 30 to 20 and “Maximum VarBinds per Set PDU” from 50 to 20.
Thanks -
I keep getting this screen and before I have to call and pay and wanted to see if there was something that I could do.
Pavilion dv4-1123us get blue screen with "hardware malfunction call hardware vendor for support"
This question was solved.
View Solution.I would say its just a conicidence and recommend you to do a system restore. As its an intermittent problem, you never know if you face same issue once again.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
I have problem with login in sql Server give me support .pre login handshake
I have problem with login in sql Server give me support .pre login handshake
The following threads are on the same topic:
http://www.sql-server-performance.com/forum/threads/pre-login-handshake-error-when-connecting-to-db.687/
http://stackoverflow.com/questions/12308340/sql-server-2000-connection-error-pre-login-handshake
http://dbaspot.com/sqlserver-server/458011-error-occurred-during-pre-login-handshake-microsoft-sql-server-error-10054-a.html
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But won't work anywhere now. I tried re-setting but has not worked. Any ideas would be appreciated.
I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!! -
I just got a new ipod 5 and when I plugged in the charging cord that came with it, it says it is not supported, and may not charge. It worked the first few times, but now it won't charge at all.
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. The cable as well as the iPod, is covered by the warranty.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Hi,all. I just got a 865PE Neo2-PS board last week,but found some problems with the sound.When i was running some games(e.g ut2004,nfs) for some while,the sound would just stop.And i got back to desktop,all the media files could not be played either.
-
HT201269 how do i get my music and purchased apps onto a new iphone?
I restored the iCloud backup onto my new iPhone 6 and none of my music, certain apps and my audiobooks did not appear. Can anyone help?
-
Why can i not reinstall itunes?
why can i not reinstall itunes? my computer says that windows installer may not be installed correctly or that my computer is on safe mode which it is not.
-
I am trying to hook a JVC GR-HD1 camera to Final cut express HD. I can get the software to control the camera, but I can not see the video. Any ideas. I have tried with HD and SD video. help.
-
How can i disable the registration pop up when a new user logs in each time?
i work at a University and i install FCE 4, it launches and it comes to a registration screen. how can i get that registration screen to go away so that when new users log into the Mac they wont get that registration screen pop up? any help would be