WLC 5508 and 802.11n
We are currently deploying multiple 3502 AP's and a WLC5508. Is it recommended to put the access points that are one the same site as the controller on H-REAP or put them on local mode. The WLC5508 has a max uplink of 8 Gb can that be a limitation when using local mode? Or is this only a theoratical restrain?
Hey Sebastiaan,
I would say it depends on your traffic flows and enviroment, how u would like to design your Network. The 5508 is able to handle up 500 access points for business-critical wireless services at locations of all size. 16MB per AP (theoreticaly). When u think to HA, normaly not more than 250 AP's will join one Controller.
how much want u deploy? the 8 Gbit could be a limitations but I would say u can use the local mode if you want.
much more relaxed will be H-Reap if your desing allows that.
We use a mix mode, depends on the SSID.
regards,
Sebastian
Similar Messages
-
WLC 5508 And Third Party SSL for Web Authenticaiton
Hello,
We are using WLC 5508 and currently the authentication process is via Customized WebAuth. As you know that with the WebAuth the authentication process won't work unless you launch Web Browser and you will be redirected to the Authentication Page where you type your username and password. This is a bit fuzzy for most of the users and what I'm thinking is to use different authentication mechanism where the user will automatically be prompted upon connecting to any SSID. I have read that Public/Thrid Party certificate will do this and any client can accept the public certificate.
Anyone can elaborate on this approach?
Regards,With machines that are not part of the domain, typicall if you still want to secure them usin 802.1x, you would leverage a radius server and users would be told of the SSID to connect to and enter their AD credentials. Of course, if you use AD credentials, users will now join all their other devices to that SSID. This is where ISE comes in and you can profile devices. Even though the WLC with v7.6 can profile, it's not a full fledge profiler. Depending on how well you know radius, you can leverage a portal page also and depending on the AD group a user is a member of, you can out them is a specific Vlan or if you leverage interface groups. You can do many things, but you need to really know radius and client types to figure out what can and work well in your environment. Radius alone to someone who hasn't played with it, can take days to setup without help.
Every client I setup radius for is different and it comes down to how their users are setup in AD, what devices they have and the requirements.
Scott -
Integration between WLC 5508 and Microsoft NPS 2008
Hi guys,
Any of you, have working guidance for WLC 5508 and Microsoft NPS 2008 integration?
I managed to configure Wireless 802.1x feature (PEAP) but it failed. I'm running software ver. 7.0.116.0.
Is there any bug related 802.1x on this software version?
thanks in advance.
BR
shendyHi Shendy,
I am not aware about any bug related to this. I think you better check all configuration and make sure it is fine.
Logs from NPS and WLC (and possibly from the supplicant) may guide you where the problem resides.
What does the NPS logs tell about the reason of the authentication failure?
What does the WLC logs say about the failure (check show msglog and show traplog).
- Make sure the Radius server added correctly with correct IP and correct shared secret on WLC.
- Make sure that the radius is configured correctly to allow PEAP-MSCHAPv2.
- Make sure WLC is added successfully to WLC with correct IP address and correct shared secret.
- Make sure the clients are correctly configured and the server's (NPS) certificate is trusted on the clients.
HTH
Amjad -
Hi,
I have a problem with a poor signal. I have two WLC 5508 and 10 ap's 3502. So, that I have two wlc on the network I decided to divide this 10 ap's.
WLC 5508 has 7.0.98 software version.
The 5 first ap was associated to one wlc and the other 5 to second controller.
Two problems was observed, first that some clients which try connect to AP associated to second controller have problem to obtain IP address from DHCP pool on first wlc.
The second problem is that on this two WLC was configured two DHCP pool. One controller assigns address for a dedicated WLAN and the second wlc assigns address for a second WLAN.
This two WLAN's is broadcast on two wlc.
KamilHi Nicolas,
The APs are 3502I model and now are located on the lower ceiling.
From Thursday all APs are associated to only one WLC the second one is just only as a backup and from this time there are not any problems with a signal. This information is directly from clients.
The DHCP pool is located on the first WLC now.
Also, I considered to use switch or other machine as a DHCP pool but it's problematic to deploy now.
Kamil -
WLC 5508 and remote site (DMVPN) Access Points
Hi All,
We just purchased a WLC 5508 and would like to know if it will control remote VPN site Access Points. Here are the details:
The 5508 will live at our home office. We have multiple remote sites that are connected via Cisco's DMVPN. Each site has one Cisco 1131 Access Point hanging off of either a Cisco 1841 or a 2811 that is using DMVPN back to the home office 2811. Can the 5508 manage the remote Access Points?
Thanks for your help guys!Are you are talking about OfficeExtend?
Cisco OfficeExtend
https://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns430/solution_overview_c22-523307_ns348_Networking_Solution_Solution_Overview.html
OfficeExtend supports 1130 & 1140 as long as you have the Wireless PLUS (WPLUS) Software.
OfficeExtend Access Point
http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0apcfg.html#wp1069890 -
Wlc 5508 and 40 access point 1141n disturbance in the temp response
Hello,
i have a wlc 5508 and 40 access point 1141n
there are 1500 users connected with this controller 5508.
but when i ping at my gateway ,there is a disturbance in the temp response .
Here below a snapshot:
Réponse de 172.16.1.1 : octets=32 temps=1 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=5 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=2 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=56 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=105 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=433 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=1 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=100 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=300 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=466 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=711 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=900 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=55 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=52 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=54 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=200 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=57 ms TTL=55
Réponse de 172.16.1.1: octets=32 temps=800 ms TTL=55
anyone help me?
thxLooks to be wither a duplicate address issue or a configuration issue. Try to test with only using the 2.4ghz and then again with only the 5ghz and see if you see a difference.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
WLC 5508 AND AP 1141N disturbance in the temp response
i have a wlc 5508 and 40 access point 1141n
there are 1500 users connected with this controller 5508.
but when i ping at my gateway ,there is a disturbance in the temp response .
Here below a snapshot:
Réponse de 172.16.1.1 : octets=32 temps=1 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=5 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=2 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=56 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=105 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=433 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=1 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=100 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=300 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=466 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=711 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=900 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=55 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=52 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=54 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=200 ms TTL=55
Réponse de 172.16.1.1 : octets=32 temps=57 ms TTL=55
Réponse de 172.16.1.1: octets=32 temps=800 ms TTL=55
anyone help me
THXLooks to be wither a duplicate address issue or a configuration issue. Try to test with only using the 2.4ghz and then again with only the 5ghz and see if you see a difference.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
WLC 5508 and LAP1310 - Not syncing up!
As the title states I have a WLC 5508 and a LAP1310 that will not sync up.
The error stated in the traps log is "AP with MAC (xxxx.xxxx.xxxx.xxxx) is unknown."
WLC software release is : 7.2.103.0
IOS on the AP is : 12.4(18a)JA2
Upon some investigation I found that the "AP with MAC is unknown" error usually points to one of two things:
A. WLC firmware needs to be updated
B. AP needs to be updated.
C. The AP is not compatible with the WLC.
I am leaning toward solution C and I am looking for a conformation or a correction, if anyone could help out that would be greatly appreciated!
I've tried reading the compatibility matrix released by Cisco, but I found it mildly confusing as to what is and isn't supported by each software release.
Sources - http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml#lap1250
Problem 11: 1250 LAP Not Able to Join WLC
The setup consists of a 2106 WLC that runs version 4.1.185.0. A Cisco 1250 AP is not able to join the controller.
The log on the WLC shows this:
Mon Jun 2 21:19:37 2008 AP with MAC f0:2x:cf:2x:1d:3x (APf02x.cf2x.1d3x) is unknown.
Mon Jun 2 21:19:37 2008 AP Associated. Base Radio MAC: f0:2x:cf:2x:1d:3x
Mon Jun 2 21:19:26 2008 AP Disassociated. Base Radio MAC:f0:2x:cf:2x:1d:3x
Mon Jun 2 21:19:20 2008 AP with MAC f0:2x:cf:2x:1d:3x (APf02x.cf2x.1d3x) is unknown.
Mon Jun 2 21:19:20 2008 AP Associated. Base Radio MAC: f0:2x:cf:2x:1d:3x
Mon Jun 2 21:19:09 2008 AP Disassociated. Base Radio MAC:f0:2x:cf:2x:1d:3x
Mon Jun 2 21:19:03 2008 AP with MAC f0:2x:cf:2x:1d:3x (APf02x.cf2x.1d3x) is unknown.
Solution: This is because the Cisco 1250 series LAP is not supported on version 4.1. The Cisco Aironet 1250 Series AP is supported from controller versions 4.2.61 and later. In order to fix this issue, upgrade the controller software to 4.2.61.0 or later.
Problem 16: 1000 series LAPs not able to join the Wireless LAN controller, WLC runs version 5.0
This is because WLC software release 5.0.148.0 or later is not compatible with Cisco Aironet 1000 series APs. If you have a Cisco 1000 series LAP in a network, which runs WLC versions 5.0.48.0, the 1000 series LAP does not join the controller and you see this trap message on the WLC.
"AP with MAC xx:xx:xx:xx:xx:xx is unkown"videoaudiojack
What version of Premiere Elements are you using and on what computer operating system is it running?
What are the properties of this .mp4 video import (video and audio compressions, frame size, frame rate, interlaced or progressive, pixel aspect ratio)?
If you have any information about the video bitrate and audio bitrate of the file, that would be good to know.
What is the audio - stereo 2 channel or 5.1 channel?
What are you (manually) or the project automatically setting as the project preset to match the properties of your source video?
Let us start here and then decide what next.
Thank you.
ATR -
An issue with WLC 5508 and 7921 phone
Hello all!
I have a system with WLC 5508 and some 1242 APs. And I use a lot of 7921 phones.
One of 7921 phones was in trouble. It loses registration, disconnect conversations...
I installed the trial WLC and run voice diagnostics.
I saw some of "Potentially degraded QoS in downlink direction because of incorrect packet classification" messages and one "Fair upstream packet loss ratio: 1,2%, which is less than threshold 2.5%"
As I understand all of 7921 phones in these area are affected.
what does it mean? I set up Platinum QoS for voice WLAN. I don't have any qos configuration string for AP and WLC ports on switches...
any ideas?
thanx in advanceSergey:
There is one application called "WLC Config analyzer". You save your "show run-config" from your WLC in a text file and import it by this application. it will analyze the file for you and tell you what recommendations for voice are missing so you improve them.
When importing a config file you choose what voice clinets you are using, so you need to choose cisco 7921 to it tells you what config improvemetns is needed based on 7921 needs.
Here is the link to download the application:
https://supportforums.cisco.com/docs/DOC-1373
download the latest versoin.
BTW, how many voice/data clients are connected to one AP in that area? if I remember correctly if you are utilizing voice then the max number of clients connected to one AP should not exceed 17. If you have more than this number per AP try to minimize the number of users concurrently connected to the AP then try again.
Hope you'll find the config analyzer useful.
If useful please don't forget to rate.
Amjad -
Port channel WLC 5508 and 3750
Hi All,
I want to configure Port channel for WLC 5508 and cisco 3750 Stack Switch. What changes I need to make on WLC and where?
Thanks
JagdevThanks Chris,
LAG is enable on WLC, and Port channel is configured on 3750, Please see the configration and Port channel status below:-
(Cisco Controller) >show lag summary
LAG Enabled
interface Port-channel14
description Port Channel to WLC001
switchport trunk encapsulation dot1q
switchport mode trunk
end
sh etherchannel 14 summary
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
M - not in use, minimum links not met
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 14
Number of aggregators: 14
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
14 Po14(SD) LACP Gi1/0/22(I) Gi2/0/22(I)
sh run int g1/0/22
Building configuration...
Current configuration : 209 bytes
interface GigabitEthernet1/0/22
description Trunk to WLC001 DistPort1
switchport trunk encapsulation dot1q
switchport trunk native vlan 254
switchport mode trunk
channel-group 14 mode active
end
sh run int g2/0/22
Building configuration...
Current configuration : 209 bytes
interface GigabitEthernet2/0/22
description Trunk to WLC001 DistPort2
switchport trunk encapsulation dot1q
switchport trunk native vlan 254
switchport mode trunk
channel-group 14 mode active
end -
Is it possible to get an IPv6 and 802.11n capable router?
I would like to upgrade my current wireless router to an one that supports IPv6 and 802.11n. I want to do 6in4 tunnels for IPv6 to Hurricane Electric for my tunnel service and I have computers that have 802.11n. Currently I have the Actiontec (Verizon) MI424-WR wireless router with 10/100 ports. Can I get this through Verizon? I know I can go buy a Wireless router that can provide this on the outside, but want to ensure that this doesn't mess up my tv services. I have the three services currently on FIOS. TV, Internet and phone. So the router controls the TV settop boxes also.
Well Verzion them selve has no plans to switch customers over to ipv6 capable routers right away as its hard to get on Wireless N router from them as well unless you are on a buisness plan.Now If you Turn off your wireless from the Verizon side and hook up a router switch to a open port on the verizon router\modem there should be no problem as thats how i do mine.Also there are only certain routers and that support Wireless N and IPv6 access and I will post some info here as well about that.
http://www.dlink.com/products/?pid=767 <<< Heres The Dlink one im using as Dlink and Cisco (linksys) are the only companys that support Ipv6 fully on certain models.
Heres another IPV6 Router >> http://www.dlink.com/products/?pid=737
only two i know of but was told there are two more dlink models that support it but i contacted dlink and they told that the two links i have posted here are the only fully compatible IPV6 routers availible.
Heres one of ciscos routers >> http://homestore.cisco.com/en-us/Routers/Linksys-E4200-MaximumPerformance-Wirelessn-router_stcVVprod... -
What is the spec of WLC 5508 and 4402, CPU and MEM? Thanks.
I cant found any information about WLC 5508 and 4402s' spec of what type of CPU and size of MEM. Thanks.
4402 is having 512MB memory where as 5508 is having 1GB (based on "show memory statistics" output)
Also during bootup it will show (here is 4402 as example)
System will now restart!
Bootloader 7.0.116.0 (Apr 13 2011 - 14:30:45)
Motorola PowerPC ProcessorID=00000000 Rev. PVR=80200020
CPU: 833 MHz
CCB: 333 MHz
DDR: 166 MHz
LBC: 41 MHz
L1 D-cache 32KB, L1 I-cache 32KB enabled.
I2C: ready
DTT: 1 is 33 C
DRAM: DDR module detected, total size:512MB.
512 MB
8540 in PCI Host Mode.
8540 is the PCI Arbiter.
Memory Test PASS
FLASH:
Flash Bank 0: portsize = 2, size = 8 MB in 142 Sectors
8 MB
L2 cache enabled: 256KB
Card Id: 1540
Card Revision Id: 1
Card CPU Id: 1287
Number of MAC Addresses: 32
Number of Slots Supported: 4
Serial Number: FOC1229F08U
Unknown command Id: 0xa5
Unknown command Id: 0xa4
Unknown command Id: 0xa3
Manufacturers ID: 30464
Board Maintenance Level: 00
Number of supported APs: 12
In: serial
Out: serial
Err: serial
HTH
Rasika
**** Pls rate all useful responses **** -
I have a 2006 WLC with 6 1242 APs and was wondering what should I expect when I replace 1242 with an 802.11n AP.
i know that the new AP will not run at full speed but other than that, I don't know.
Any thoughts on this?
Thanks, GarySo I can add an 802.11N AP to the controller
The only 802.11n AP you can use is the 1250.
BUT it will not run at the N speed, etc. Right?
You can enable 802.11n but because the controller has 10/100BaseTx speed then you have a bottleneck.
So what we're thinking is purchasing 1 or 2 of the APs and let them run on our 2006 WLC, knowing that i WILL not see the speed difference, etc until next year, when i get the new WLC.
You're not making things easy for me are you?
Ok. So you know when is your next financial bucket will come in. How about saving your money. 1250 in an office environment .... Hmmm ... I won't recommend it. Plus the 1250 requires 20.0 watts of power (because you are running 4.X firmware). SO you either use a switch that can pour 20.0 PoE power, a power injector or remove one of the radio modules.
If you get, for instance, the 1040 (aka baby "N") or the 1140 plus the 5508 then you can really run 802.11n. -
IPhones not taking ipv4 addresses on Unified Wireless (WLC 5508 and AP 3602)
This is a really odd one...
Earlier this week we started having issues with our BYOD wireless network (802.1x, WPA2+AES) but only with Apple devices (iphone and ipad). Employees with Android or Windows phones are not having any problems at all.
A brief summary of what's observable for the issue:
Radius authentication succeeds (PASS observable in ACS logs)
IPhone status viewed on both controllers (foreign anchor in DMZ as well as corporate WLC) shows phone associated.
Debug client output shows an IPv4 address is actually being assigned to the phone however it appears to ignore it and restart the DHCP request process so debug output shows what looks to be a loop of DHCP request and offer stages.
Infrastructure notes
Cisco WLC 5508s are all running 7.4.121.0 (tried rolling back to 7.2.110.0 .....didn't help)
APs are all 3602I-N-K9
DHCP for the BYOD network is running on the anchor in the DMZ however this was temporarily moved to a switch (had no effect).
Any ideas?
DHCP Loop:
*mmListen: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f 0.0.0.0 RUN (20) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206 Local Bridging Vlan = 93, Local Bridging intf id = 12
*mmListen: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f 0.0.0.0 RUN (20) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255)
*pemReceiveTask: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f Set bi-dir guest tunnel for a4:c3:61:7a:1a:4f as in Export Anchor role
*pemReceiveTask: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f 0.0.0.0 Added NPU entry of type 1, dtlFlags 0x4
*pemReceiveTask: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f Pushing IPv6: fe80:0000:0000:0000: 0c00:0c94:459e:a9db , and MAC: A4:C3:61:7A:1A:4F , Binding to Data Plane. SUCCESS !!
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 172.24.16.251
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
*DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
*DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
*DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
*DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
*DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 172.24.16.102
*DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP server id: 0.0.0.0 rcvd server id: 172.24.13.251
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 1, flags: 0
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 172.24.16.251
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
*DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
*DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
*DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
*DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
*DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 172.24.16.102
*DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP server id: 0.0.0.0 rcvd server id: 172.24.13.251
*DHCP Socket Task: Apr 30 11:44:53.754: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 3, flags: 0
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 172.24.16.251
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 172.24.16.102
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP server id: 0.0.0.0 rcvd server id: 172.24.13.251
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 8, flags: 0
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 172.24.16.251
*DHCP Socket Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 172.24.16.102
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP server id: 0.0.0.0 rcvd server id: 172.24.13.251
*DHCP Socket Task: Apr 30 11:45:07.059: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
*DHCP Socket Task: Apr 30 11:45:07.059: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,Thanks Scott, here you go...
On Foreign:
WLAN Identifier.................................. 2
Profile Name..................................... BAI-Beta
Network Name (SSID).............................. BAI-Beta
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Disabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 42
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 86400 seconds
User Idle Timeout................................ 300 seconds
--More-- or (q)uit
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... CHTWLC
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Enabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
Quality of Service............................... Bronze
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
--More-- or (q)uit
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Disabled
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ 172.24.13.20 1812
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
--More-- or (q)uit
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Enabled
PSK..................................... Disabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
--More-- or (q)uit
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
--More-- or (q)uit
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
2 172.24.13.251 Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled
On Anchor:
WLAN Identifier.................................. 1
Profile Name..................................... BAI-Beta
Network Name (SSID).............................. BAI-Beta
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Disabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 48
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 86400 seconds
User Idle Timeout................................ 300 seconds
--More-- or (q)uit
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... CHADWLC01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ bai-beta
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Enabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
Quality of Service............................... Bronze
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
--More-- or (q)uit
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Disabled
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ 172.24.13.20 1812
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
--More-- or (q)uit
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Enabled
PSK..................................... Disabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
--More-- or (q)uit
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
--More-- or (q)uit
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
1 172.24.13.251 Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled -
Hi Fellows,
I wanna know if 5508 Cisco WLC support LACP or not. Actually i work in a project where i must
connect WLC 5508 in Enterasys Switches with Link Aggregation.
Enterasys Switches support LACP 802.3ad but when i learn Cisco Books i see that WLC 5508
doesn't support LACP.
Can you help please ?
Sincerely
JosephHi,
Please take a look into the config guide:
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mint.html#wp1277652.
You can read there:
Once the EtherChannel is configured as on at both ends of the link, it does not matter if the Catalyst switch is configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation Protocol (PAgP) because no channel negotiation is done between the controller and the switch. Additionally, LACP and PAgP are not supported on the controller.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
Maybe you are looking for
-
Doubt about a null value assigned to a String variable
Hi, I have a doubt about a behavior when assigning a null value to a string variable and then seeing the output, the code is the next one: public static void main(String[] args) { String total = null; System.out.println(total);
-
hello, i have a question. i think i know the answer already just want to make sure with you gurus. someone told me that structures don ot contain data. but i have seen code where people enhance structures that are on LBWE screen. so if they append st
-
Issue with clearing the Differences in 999 storage type in HU managed S.Loc
Hi Experts, We are trying to writeoff the differences stocks which are there in 999 storage type, but getting an error message 'Quantity difference document line item for HU's' with Message class L6 & Message number 606. Any idea how this can be reso
-
Firmware for N73 & new ver. real player
I need new Firmware for N73 because in n73 real player can not create video playlist. Anyone help me. How can i install new firmware for n73. Please give full details for installation process.
-
Folder view sorting created by import
I recently imported my iPhoto library, year-by-year, into LR. I decided to simply go with a date format, keeping the filenames the same. So, now I have a bunch of Folders like .../2004/December/12/... and so on. Seemed reasonably. One thing I've noti