WLC 5508 - Error When Uploading Webauth Bundle

Currently have a WLC 5508 running 7.4.110.0. I'm trying to upload (download) a webauth bundle to the controller from the web interface and am getting an error. I've tried using FTP, SFTP and TFTP and get a different error with each. When I started out with this, I was using a modified login.tar. Thinking this was the problem, I switched to using the login.tar file included with the Web Authentication Bundle version 1.0.2 downloaded from the Cisco site. This file fails with the errors below. Does anyone have suggestions as to what I'm doing wrong? Is this is a known bug in this version of the software? Thanks!
For FTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 13:51:12.942: #UPDATE-3-FTP_TRANSFER_FAIL: updcode.c:5631
Error FTP file Transfer [ftp_get], <30>, Read-only file system.
For SFTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 14:52:58.779: #UPDATE-3-SFTP_TRANSFER_FAIL: updcode.c:5869
Error SFTP file Transfer [sftp_get], <11>, Resource temporarily unavailable.
For TFTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 15:02:39.232: #UPDATE-3-FILE_OPEN_FAIL: updcode.c:4593 Fai
led to open file webauth.tar.
*sshpmReceiveTask: May 28 15:02:39.153: #OSAPI-3-MUTEX_FREE_INFO: osapi_sem.c:10
87 Sema 0x2b32def8 time=11504 ulk=18587678 lk=18576174 Locker(sshpmReceiveTask s
shpmrecv.c:1662 pc=0x10b07938) unLocker(sshpmReceiveTask sshpmReceiveTaskEntry:1
647 pc=0x10b079

Hi,
1. Did you used PIcozip to compress your webauth bundle?
2. Did you try only with one laptop , if yes then try to use other one.
3. Just try to upload default webauth bundl from cisco to wlc and show the result to us.
7.4.121.0 is very stable version.
Regards

Similar Messages

Error when uploading "The bundle identifier cannot be changed from the previous version"

I have an app on the App Store created with DPS, Single Edition a long time ago, shortly after DPS SE became available. Now I've updated the app, built a new version with DPS App Builder, created a new version of the app in iTunes Connect, and tried to upload the Distribution zip file using application loader. I'm getting 2 error messages:
"This bundle is invalid. The bundle identifier cannot be changed from the previous version. If you want to change your bundle identifier, you will need to create a new application in iTunes Connect..."
and
"This app contains an embedded provisioning profile that is not associated with your account. Please use a provisioning profile associated with Team ID ..."
I've done this several times before with other apps, and never got these errors before. Any ideas of what is going on?
I'm able to view the developer ipa file just fine on my iPad.

Nevermind. I left for lunch, returned, took a fresh look at it, and discovered that it was a stupid human error on my part.

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

No suitable driver error when upload a pdf

We are going to develop our own packaging tool which can provide convenient service for Adobe Content Server.
Before we begin on this project, we use the java sample console program which is called UploadTest to find out
how to interact with Adobe Content Server.
However, when we use the UploadTest jar tool to package a PDF to Adobe Content Server and send our request
successfully, the server always response a error as below with “httpStatus:200 " and “contentType:application/vnd.adobe.adept+xml”:
<error xmlns="http://ns.adobe.com/adept" data="E_PACK_DATABASE http://192.168.34.56:8080/packaging/Package
No%20suitable%20driver"/>
Other details:
(1)I am in Guangzhou China now ,but the server is in the charge of our USA Team in American.
(2)The commandline we use:
java -Xmx1024M -jar UploadTest-1_2.jar http://our website/packaging/Package PdfFilePath -pass password.
Who can help me?Why do the error arise? Do I need some other steps to make? Waiting for help online .Thank you very much!

Thank you for helping us to catch the error.
2012/12/13 Jim_Lester <[email protected]>
Re: no suitable driver error when upload a pdf created by Jim_Lester<http://forums.adobe.com/people/Jim_Lester>in
Adobe Content Server - View the full discussion<http://forums.adobe.com/message/4918463#4918463

Experiencing "timed out" error when uploading podcast

I am experiencing a "timed out" error when uploading a podcast to iTunes. Using PC. I've updated iTunes...

- You really need to ask the Basis team to extend the maximum run time for background processes (30 mins is too short).
- You can also try to reduce the run time by setting up BOM Buffering in configuration so if the same BOM is used again and again (in your case of delete and recreate planned order, yes), it will read from memory.
- You should set the planning horizon and use NETPL (net change in planning horizon) in daily run. So that the run will only find the relevant changes in order proposal up to certain days, thus reduce run time.
- You should discuss with your BASIS team about the list of background job in the batch windows. Specify time in such a way that the performance-critical job (i.e., MRP, reschedule sales order, certain customized report, etc.) doesn't run at the same time.
- You can increase the number of parallel processes to issue several jobs to run MRP at the same time.
Rgrds,

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Error when uploading file : Return code = 6 in LSMW

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

did you define the file in step 7 without any error and allocate in step 8 without any error before?
I mean in the same system where you execute the read step.
Make sure you have the file not open when you execute the read step.

I keep getting an error when uploading documents

I keep getting an error when uploading pages, keynote, or word documents into icloud.com. It won't tell me what type or error and it acts like it loads and gets all the way to the end of the bar and then says "error please try again." Please help!

Have you tried a different web browser when submitting your proof of eligibility?

Error when uploading master data

Hello everybody...
I m finding an error when uploading the master data (BW 3.5)from a flat file. error is...
Error 8 when compiling the upload program: row
227, message: The data type
/BIC/CCABZRAK_COUN_ATTR was modified
plz suggest me.....
Thanks & Regards
Rakesh Jangir

Hi,
There might be two reasons..
1. In your flat file you have data in lower case .. if you want upper case data also just make change in IO to allow lower case data also..
2. Close the flat file while loading data...
Regards,
viren..

Error when uploading file :( Return code = 6 )

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

Hi,
If the Sy-Subrc is 0 then Success,
Sy-SUBRC is 4 then failure,
Sy-SUBRC = 6 then the user might be not access to read the file.
This is due to authorization issue.

Error when uploading file

Hi all,
we just have upgraded our EREC system to Enhancement Package 4, and we have now lot's of issues when the candidates try to upload documents in their cockpit. Even if the type of document is ok or the file size is fine also, there is the following error message : Error when uploading; the file name is invalid, or the file is too big
We have this error with lot's of web browser : IE6-IE7-IE8-Firefox 2.xx-Firefox 3.6-Safari 3 and 4-Chrome
It is impossible to debug this error, there is no stop at the breakpoints.
Did anyone have any suggestion ?
Our system information :
EREC 604 SP 5
NW 701 SP 5
Thanks in advance
Dominique

Hello Sai,
we already put an external breakpoint on the first step of the method called by the button, but it does not stop on this breakpoint.
It looks like the error message is generated by javascript or is in the cache, but it is not possible to find where.
WD component : HRRCF_C_ATTACHMENTS_UI
View : VW_ATTACHMENT_DETAIL
Method : ONACTIONAPPLY
Thanks for your help
Dominique

WLC 5508 - Error extracting webauth files.

Hi all,
i am getting an error during the Upload of Login page for WLC 5508 customized.
After the upload is completed i receveid the error "Error extracting webauth files."
I tried to create the file *.tar with different program (winrar, 7zip, gnu tar, etc)
anyone know the solution for this problem?
Thanks
Marco

TQVVM Marco, it helps and issue resolved. I was downloading a folder consists of (login.html+folder CSS) compressed .TAR but failed. Instead of putting in a folder and directly downloaded the compressed .TAR and it was extracted successfully.
Thanks.

Error when installing webauth certificate virtual wireless LAN controller

Hi there
I am having issues installing web auth certificate for our virtual wirelesss LAN controller.
I am issuing a certificate from our own PKI in following format
device cert for WLC > Intermediate > our root cert.
I have followed the discussion here
https://supportforums.cisco.com/discussion/10890871/generating-csr-wlc-5508
and the document here
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html#support
However I am still getting the following errors
*sshpmLscTask: Jun 30 17:18:26.443: sshpmLscTask: LSC Task received a message 4
*TransferTask: Jun 30 17:18:28.785: Memory overcommit policy changed from 0 to 1
*TransferTask: Jun 30 17:18:28.785: RESULT_STRING: FTP Webauth cert transfer starting.
*TransferTask: Jun 30 17:18:28.785: RESULT_CODE:1
FTP Webauth cert transfer starting.
*TransferTask: Jun 30 17:18:33.154: ftp operation returns 0
*TransferTask: Jun 30 17:18:33.154: RESULT_STRING: FTP receive complete... Installing Certificate.
FTP receive complete... Installing Certificate.
*TransferTask: Jun 30 17:18:33.154: RESULT_CODE:13
*TransferTask: Jun 30 17:18:37.159: Adding cert (8217 bytes) with certificate key password.
*TransferTask: Jun 30 17:18:37.169: sshpmCheckWebauthCert: Verification return code: 1
*TransferTask: Jun 30 17:18:37.169: Verification result text: ok
*TransferTask: Jun 30 17:18:37.171: sshpmAddWebauthCert: Extracting private key from webauth cert and using bundled pkcs12 password.
*TransferTask: Jun 30 17:18:37.361: sshpmDecodePrivateKey: calling ssh_skb_decode()...
*TransferTask: Jun 30 17:18:37.493: sshpmDecodePrivateKey: SshPrivateKeyPtr after skb_decode: 0x2aaaacb51628
*TransferTask: Jun 30 17:18:37.493: sshpmAddWebauthCert: got private key; extracting certificate...
*TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: extracted binary cert; doing x509 decode
*TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: doing x509 decode for 1594 byte certificate...
*TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: failed to validate certificate...
*TransferTask: Jun 30 17:18:37.494: RESULT_STRING: Error installing certificate.
*TransferTask: Jun 30 17:18:37.495: RESULT_CODE:12
*TransferTask: Jun 30 17:18:37.495: Memory overcommit policy restored from 1 to 0
Error installing certificate.
Any help is much appreciated

Similar issue:
https://supportforums.cisco.com/discussion/11043836/wism-42112-and-web-auth-certificate

Error when uploading a tif file

Hi All,
I want to upload a file in tif format.i am having the file with tiff format.
when i upload through se78 /import and given the file name as c:\CCNA- Puerto Rico Region Logo.
But it is showing the following error.
Uploading TIFF Files to SAPscript Texts                                        1
Load File
c:\CCNA- Puerto Rico Region Logo
The file contains 8,678,690 bytes
This is a TIFF file with INTEL byte order
First IFD offset:                                8,672,788
Reading IFD from offset 8,672,788 Number of Tags         22
ImageWidth:                                          2,226
ImageLength:                                           910
Error: BitsPerSample tag has length <> 1 or 3
Compression:                                             1
Photometric Interpretation:                              5
Number of StripOffsets:                                  1
SamplesPerPixel:                                         4
RowsPerStrip:                                          910
Number of StripByteCounts:                               1
XResolution:                                     5,000,000 /     10,000
YResolution:                                     5,000,000 /     10,000
ResolutionUnit:                                          2
TIFF format error: No baseline TIFF 6.0 file
Appreciated ur valuable suggestions.
Thanks,
Aravinda

Hi,
Up loading tiff fife first activate rstxldmc program .
excute the program give ur logo name.
In se71 u can include that object , id, macrc or something (these are comes after excute the program give ur logo name)

Error when uploading a document to SharePoint

When uploading a file into a document library using the copy service CopyIntoItems method, I get a "There is an error in XML document (6, 3763)" (numbers variable) when the file has illegal characters in the comments of the file properties.
e.g., "ø;". Removing the comments from the file properties fixes the problem.
I don't need the comments to get uploaded, so how do I copy the file and ignore the comments?

Hello,
I think you can't ignore file properties but you can clean them. Use FileInfo class to extract file properties then remove special char. You also need to make sure that there is no special char in file name as well.
Refer this link:
http://charlesemes.blogspot.sg/2011/08/moving-crm-attachments-to-sharepoint.html
http://sharepoint.stackexchange.com/questions/34953/uploading-files-to-sharepoint-containing-the-ampersand-character
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

WLC 5508 - Error When Uploading Webauth Bundle

Similar Messages

Maybe you are looking for