WLC 5508- how to setting up with Web auth with 2 profile

Hi Guys,
I wanted to control the 2 different profile to access internet with Cisco default landing page is that possible??
Example:
When connnected the SSID will redirect to Cisco landing pages
Cisco landing pages will differentiate there is member or guess with the password key in.
Member can access internet for 30 minute
guess only can access internet for 15 minute

Just some notes on WebAuth in the WLC. The timeout is specified per SSID so there would be no way to set a timeout unless you use a radius server and send a radius attribute to the WLC to set the session timeout.
So we really need to know if you have a radius server, is the radius server tied to Active Directory or is the plan just using the WLC for everything.
Sent from Cisco Technical Support iPhone App

Similar Messages

  • I started setting up a web page with iWeb. Auto play box is checked, but music will not play when page is opened.

    I started setting up a web page with IWeb.
    Several proplems so far:
    1) Auto Play box checked for music, but music does not start when page is opened.
    2) Can't get Quicktime "start/stop" slide to start and finish a section within a long piece of music (classical for example).  How does one work the slide bar to do this?

    Yes the audio file plays on the iWeb page when I click the play button.  I even made sure it played both without the “little boxes” that surround the icon (don’t know the technical name for those), and when I click the music icon without the little boxes.
    I did note that the iTunes window that appears when I open the Inspector is not highlighted until I click the music icon and those little boxes appear.  Then the Start/Stop, Auto Play,  Loop, and Show Movie Controller are highlighted —  and work properly.
    One other thing.  I see that the iWeb icon I am working from says “Domain copy.sites2.”  Does that have a bearing on anything?

  • How do I use Edge Web Fonts with Muse?

    How do I use Edge Web Fonts with Muse - is it an update to load, a stand alone, how does it interface with Muse? I've updated to CC but have no info on this.

    Hello,
    Is there a reason why you want to use Edge Web Fonts with Adobe Muse?
    Assuming you wish to improve typography of your web pages, you should know that Muse is fully integrated with Typekit. This allows you to access and apply over 500 web fonts from within Muse. Here's how you do it:
    Select a text component within Muse, and click the Text drop-down.
    Select Add Web Fonts option, to pop-open the Add Web Fonts dialog.
    Browse and apply fonts per your design needs.
    Muse also allows you to create paragraph styles that you can save and apply to chunks of text, a la InDesign. Watch this video for more information: http://tv.adobe.com/watch/muse-feature-tour/using-typekit-with-adobe-muse/
    Also take a look at these help files to see if they help you:
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-1.html
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-2.html
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-3.html
    Hope this helps!
    Regards,
    Suhas Yogin

  • How do I add URI web link with custom tooltip like "CLICK HERE TO UPDATE" instead of URI web link in tooltip.

    How do I add URI web link with custom tooltip like "CLICK HERE TO UPDATE" instead of URI web link in tooltip.

    You've probably found an answer to this by now, but I think this has been addressed in another forum -- The link below suggested using a button and adding the tooltip to the button. 
    https://forums.adobe.com/thread/304974?start=0&tstart=0
    Sounds like it would work but I haven't actually tried it. 
    Good luck~!

  • How do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA certfificate i can't open web pages with this, how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC CA certfificate i can't open web pages with this

    how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA ?

    Hi
    I am not suprised no one answered your questions, there are simply to many of them. Can I suggest you read the faq on 'how to get help quickly at - http://forums.adobe.com/thread/470404.
    Especially the section Don't which says -
    DON'T
    Don't post a series of questions in  a single post. Splitting them into separate threads increases your  chances of a quick answer.
    PZ
    www.pziecina.com

  • Muse: How to set up a bilingual site with 2 different navigation bars?

    Hi,
    I would like to create a website in 2 languages, desktop and mobile version. The structure of the page remains the same for each language. How should I create the site so that I get one navigation bar for the first language and a second one for the other language? Is it feasible in Muse?
    Thanks for any hint in advance.
    Regards,
    christine

    Hi Christine,
    Some related threads,
    Muse: Multilingual site?
    How can i create a multilingual website?
    how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
    Do let me know if you have any question.

  • WLC 4402 - only present guest with web auth page once every (x) days

    Hi all,
    I am looking to migrate our guest wireless from a third-party system to the WLC.  Currently, we change our guest password (WPA2 PSK) every (x) days.  Each time the guest password is changed and connections are made with the new PSK, guests are redirected to a terms and conditions page which they must accept.  The MAC address is then cached and the page is not displayed again until we clear the MAC cache and change the PSK.
    I can almost replicate this with web auth in passthrough mode on the WLC, but it presents the guest with the terms and conditions page each time they reconnect to the WLAN, whether it be from roaming offsite or turning the wireless radio off then on.
    Is there any way to have the WLC replicate our current system, where a MAC is cached and the page is not displayed until some other event takes place (changing the PSK or clearing the cache?)
    Thanks!
    -P

    Wait ... Shaoqin, will the 7.5 code be released for the 4400 series controllers?  The current release is 7.0.240.0 - I see releases up to 7.4 on the 5500 series controllers
    Thanks
    -P

  • How to Set JFilechooser to show file with the same extension in the filetyp

    How to Set JFilechooser to show file with the same extension in the filetypes??
    help

    I also don't understand, but if you mean how to display only files with a certain extension in your JFileChooser then you should have a look at the JFileChooser API:
    http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JFileChooser.html
    The introduction shows an example of how to do that.

  • How to generate CSR on switches for web auth with NGS

    Hello
    I am doing a dot1x solution with web auth on cisco 3750 switches.
    Once the wired client get put into web auth state (after dot1x and mab) and goes to a website, he gets a certificate warning. This is because the certificate of the cisco switch is selfsigned.
    I want to use a verisign certificate to solve this error, but I cannot find a way to generate a CSR on a switch. I only found a guide how to request a certificate from a CA on the local network, but this is also not a solution, because the clients using the web auth, will not know the internal CA.
    Is there any way to solve this?
    Greetings
    Steven

    Hi Steven,
    The below document is actually for IOS SSLVPN, but the certificate portion should be the same:
    http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6657/white_paper_c07-372106_ps6657_Products_White_Paper.html
    Search for "Appendix B" and it goes into creating a trustpoint and then one section is for self-signed and another is for generating a certificate request to send to an external CA.
    Once a trustpoint is created the command to actually generate the CSR is "crypto pki enroll ".
    This document goes into a little more detail on all the indivual commands and what they do:
    http://www.cisco.com/en/US/docs/ios/sec_secure_connectivity/configuration/guide/sec_cert_enroll_pki.html
    Also you could use something external to the switch like OpenSSL to generate the CSR/private key and then use that to request a cert from your Verisign CA and then import the cert/keypair into the IOS device.
    Thanks,
    Nate

  • How to set mask in web dynpro input fields

    i am looking for how to set mask in web dynpro input fields.
    Please suggest

    Argha,
    As Maksim suggested, read my weblog -- it is an exact answer for such "masking" (/people/valery.silaev/blog/2005/11/29/800format-your-way)
    Next, you may not add custom js files to WebDynpro and change the way WD processes client input, so there is no way to force user to type only digits and to insert hyphens automatically.
    Valery Silaev
    EPAM Systems
    http://www.NetWeaverTeam.com

  • How to conect an IP web cam with FME

    Hi
    I have an Axis 233D IP web cam conected via ethernet with a
    PC.
    I would like to stream the web cam with Flash media encoder.
    Is this possible?
    How do I attach the Web cam with the FME?
    If someone can help please do.
    Thanks

    Using the axis video capture I mannage to have the camera in
    the input but not in the output.
    I have seen axis webcams been streamed in flash. There must
    be a way.
    Thanks

  • How to set up iOS calendar app with shared Google Calendar data

    At work (in our small office) I've been given access to the shared Google Calendar that has our work schedule. It was set up using this page (click on Share an existing calendar):
    https://support.google.com/calendar/answer/37082
    The question I have is how to set it up to work with iOS calendar app on my iPhone?

    "currently there is no shared group calendar support."
    Well, not really. You hinted at it with: "set up a group wiki."
    Go into Workgroup Manager and set up an Open Directory group. Add people to it.
    Each client must then go into iCal --> Preferences --> Accounts and add an account. The name and password entered must be the same as that added to the group, Kerberos must be unchecked, and the account URL will be like (fill in the blanks properly):
    http://<your domain name here>:8008/principals/groups/<your group name here>/
    Now each properly logged in user of that group can make changes to the shared group calendar, without any "hacks" like making dummy users and delegation.
    However, I am getting a notifier: "Request Error: Accesss to <event name> in <your group name here> in account <your group name here> is not permitted." But that seems to be a lie, since multiple members of the group can make changes and others can see the changes.
    Oh yea, make sure you have a functioning DNS with valid reverse lookup.
    Message was edited by: Bytesmiths

  • How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart

    How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by  Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?

    For the detailed list of differences across editions refer this link
    http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html

  • Web auth with , intenal web page of WLC and ISE as radius server

    Hi All ,
    We have created a SSID as web auth with internal web page for login . In advanced tab we configured AAA server.  AD is integrated with ISE .
    When the user tries to get connect , he is getting redirect URL . But during the authentication , we are getting error in ISE as
    "ise has problems communicating with active directory  using its machine credentials "  and authentication getting failed .
    When we have L2 security mechanism enabled with PEAP , ISE is able to read the AD and providing authentication .
    Only for L3 web auth it is not happening..
    Any clue on this ..???
    Thanks,
    Regards,
    Vijay.

    Machine credentials requires a lookup on the computer OU and that has to be defined on the client side.
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • How to set the fonts in the user profile(very urgent)

    Hi All,
    Can anyone please tell how to set the fonts in the user profile.
    We have a requirement where currently all the data is being displayed in a font and the user want to change that font permanently.
    I hope you have got the requirement.
    Points will be surely awarded.
    Thank you.

    Hi,
    U can do this in SU02.
    Kishi.

Maybe you are looking for