WLC 5508 reboots itself after upgrading to 7.5.102.0

Hello all.
We have two WLC 5508 and we upgraded both to software release 7.5.102.0 two weeks ago. We also upgrade the FUS to version 1.7.
Since then both WLC reboot randomly once or twice a day with no obvious reason.
Is anyone else facing the same issue?
Many thanks.

Ok, in that case it is very difficult to pin-point the cause for these sorts reboots. It may be due to a unknown bug. Go through below 7.5.102.0 release notes and see any unresolved caveats related to your issue
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn75.html#wp1030058
Have you configure syslog on your WLC ? If so see what is the last syslog message sent by WLC before reloading, it may indicate something.
Do more observation & see whetehr controller reboot every time it hit 1k client limit. Try to narrow down the criteria to identify under what conditions this will trigger.
In my controller I do not have that many clients & cannot comment if it is related.
HTH
Rasika

Similar Messages

HELP! my ipad 2 keeps rebooting itself after 2 minutes and battery is stuck at 1%. what should I do?

HELP! my ipad 2 keeps rebooting itself after 2 minutes and battery is stuck at 1%. what should I do?

Step by step troubleshooting:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808

My Iphone 3G reboot itself after few minutes when i done auto lock.

My Iphone 3G reboot itself after few minutes when i done auto lock. otherwise its working good and i m not facing other problems but when i do auto lock then after few minutes i press home button then my iphone start from the starting. Please help me is it firmware problem or its hardware problem ? i m using firmware 4.1 (8B117).
Waiting for your earlier response.
Thanks & very best regards,
Irfan.

?

IPod reboots itself after one particular track.

Hi,
I've tried finding the answer through Google, but had no luck.
My iPod touch reboots itself after I choose to play a particular track. It happens as soon as the track has finished playing. It's strange because it only happens if I manually select this track to be played- it doesn't happen when the iPod selects it (like when it's on shuffle). I bought the song from iTunes so I'm sure it's not corrupt and this didn't happen with my iPod nano...

"it forgets what album and track you were playing before the recharge."
If you are charging it via a computer, that's normal. You are making a connection to the computer and it will show the "do not disconnect" screen. After disconnection, it reverts to the main menu.
If you charge via the wall charger, it will 'remember' where you left off.

My iPhone 5 keep rebooting itself after update to iOS 8? My friends iphone 5 is doing it too...already reset the phone and the problem till happen.

My iPhone 5 keep rebooting itself after update to iOS 8? My friends iphone 5 is doing it too...already reset the phone and the problem till happen.
What at can I do to fix the problem???

Hello there, Fernandox26.
The following Knowledge Base article offers up some great steps for troubleshooting isues with unexpected power issues with your iOS device:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

WLC 5508 - WLANs disabled after reboot

Hi,
I'm running 3 WLC 5508, 2 of them running image AIR-CT5500-K9-7-0-116-0.aes, one AIR-CT5500-LDPE-K9-7-0-116-0.aes.
On the 5508 running the LDPE-image, I have 9 WLANs (170,171,180,181,190,191,281,282,283), all defined with admin status "ENABLED".
WLANs 180,181,281 belong to a defined AP-group, WLAN 190,191,282 belong to a different AP-group.
WLANs 180,181,190,191 are defined as H-REAP. The H-REAP APs registers without any problems at the backup WLC and switches back successfully to the primary controller after recovering from reboot.
Unfortunately the WLANs 180,181,190,191 show status "DISABLED" every time the primary controller comes back and I have to enable them manually.
Doing exactly the same procedure with one of the other WLC, running AIR-CT5500-K9-7-0-116-0, I never face this problem.
Has anyone faced something similar ? Any hints or tipps are very much appreciated

I would like to pick up the discussion again. I had to upgrade the 2 WLC's involved in the scenarion and the WLANs are staying enabled. The APs are registering in a perfect time at the secondary 5508 and so do the clients.
After the primary 5508 comes back the LWAPPs are registering back to that WLC seemless and so do the clients but sometimes (not always) not without loosing the connections for about 15 secs, which is unacceptable since the applications will drop.
We also get the following error-msg:
*Sep 12 13:39:05.598: %AAA-3-BADSERVERTYPEERROR: Cannot process authentication server type radius (UNKNOWN)
*Sep 12 13:39:05.598: %DOT11-7-AUTH_FAILED: Station 0026.c730.88ae Authentication failed
Hass anyone faced something similar ?

WLC 5508 rebooted but still showing high uptime

Hi all,
I had to reboot our production WLC 5508 last night to apply a new adder license, which increased our AP count by 25.
We run a DMZ mobility controller alongside the primary controller, which handles our mobile/guest WLANs using a Mobility Anchor. Normally we would reboot both of these due to issues with the anchor after the primary is rebooted.
So last night I rebooted the primary after installing the new adder license. Once it came back up, I checked the license count and it had increased as per the new license. After that I rebooted the mobility controller, and waited to ensure that this came back up.
Almost straight away, all the AP's had re-associated with the primary (all 96 of them), and clients were starting to show up. I checked the same on the mobility controller (although this does not manage any AP's) and I could see mobility clients associating with this also.
The problem came this morning, when none of the mobility clients that were connected to the mobiltiy WLANs were able to get to the Internet, or any kind of outside connection. This is the typical issue we see when our core switch gets rebooted, or the primary on its own, without rebooting the secondary.
So to troubleshoot this morning the first thing I suddenly noticed was the uptime on the primary controller. It showed 298 days!!
Anyone seen this behaviour before? The WLC DID reboot - I watched it go down and POST again. Why would the uptime counter not reset?
We're on firmware 7.2.111.3 - which I realise is pretty old, but due to CIsco screwing us over with a limited upgrade path, we are not able to upgrade it yet (AP hardware not supported on any of the newer code above this version).
Any help appreciated!

In response to Sandeep, here's the sh sysinfo output:
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.2.111.3
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
Build Type....................................... DATA + WPS
System Name...................................... UK***********
System Location.................................. Slough CoLo
System Contact................................... Greg Dent
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 172.17.1.40
Last Reset....................................... Software reset
System Up Time................................... 0 days 3 hrs 42 mins 23 secs
System Timezone Location.........................
Configured Country............................... Multiple Countries:GB,RU,US
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +44 C
External Temperature............................. +26 C
--More-- or (q)uit
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 7
Number of Active Clients......................... 794
Burned-in MAC Address............................ **************
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 125
As you may notice, the uptime has now reset, but thats because I had to reboot it again this morning. I didnt grab the output before the second reboot. It seems whatever issue caused the uptime counter not to reset didnt occur this time.
Very odd.

2 Cisco WLC 5508 controllers and software upgrade 7.6.130 + FUS 1.9

Hi
I have two WLC 5508 controllers that need 7.6.130 and FUS 1.9 installed. (Current version 7.3 and FUS 1.7)
Configuration: One controller is at Site A and the other controller is at Site B (two different states..)
They're configured so that if Site A goes down, Site A AP's will failover to Site B and vice versa ..
- What would be the recommended approach for upgrading the software to 7.6.130.0 (from 7.3) and also upgrading FUS 1.9 (from 1.7)?
My plan was to download 7.6.130.0 to both controllers and pre-download the software to all AP's (about 100 total between both sites) and then reboot the controllers at night at the same time? Or one before the other?
Step 2. Install FUS 1.9 to each controller.
I'm concerned over what might happen during the upgrade and AP failover etc..
Thanks

This is what I would do:
Upload v7.6.130.0 to all WLCs and then use the pre image download to push the image to all access points.
Dont reboot the wlc
Image swap in the access points so that v7.6.130.0 is primary
Move all access point to one of the WLCs (A)
Enable ap AAA authentication on the WLC that has no access points and the one you will work on first. This prevents access points from joining
Reboot the WLC (A)
Upload the FUS 1.9.0.0
Reboot WLC (A) this takes up to 45 minutes
When the WLC (A) comes back online, uncheck ap AAA authentication
Move access points from WLC (B) to WLC (A)
Enable ap AAA authentication on WLC (B)
Perform all the other task you did earlier on WLC (A)
That's it.
-Scott

About WLC 5508 version 6.0 upgrade to 7.0 issue

hi guys,
I have tow WLC , version is 6.0
One of the WLC successful upgrade and after rebooting the normal
the another WLC successful too , but after rebooting the system version or 6.0
Thanks in advance

Hi,
it seems the one that shows 6.0 was not successfully upgraded. give it another round.
Rating useful replies is more useful than saying "Thank you"

My iphone 4S 64gb factory unlocked keep freezing when running especially the music and photo app; and it keep rebooting itself after every total battery drain; i'm on ios 5.1

i upgraded to the ios 5.1; and i realized that each time i have a comple battery drain and the phone goes off; when i connect the iphone to charge; it keeps rebooting itself. And the phone freezes when in the middle of applications; i have to stop the app and start it several times before it works; i have an iphone 4S 64gb factory unlocked

At first drain the battery till the iPhone gets off for many times isnt really a good thing read this:
http://www.apple.com/batteries/
after that I think the only way that will help you is restore the iPhone and the bad news are that you should do it without restore a backup after cause you're problem could be saved in the backup of the phone too so you must manually reinstall apps, preferences etc etc

My ipod classic 160 GB continually reboots itself after crashing about a half hour ago. How can I fix this?

Please help me figure out how to fix this situation, whether I can reset it or whether I need it serviced. I tried the center and menu buttons, and again, it just kept rebooting itself.
I stopped upgrading iTunes at 10.3.1, so please don't suggest that I upgrade because I need my Front Row. Plus, my iPod has been working for at least 6 months with 10.3.1.
Thank you,
Erik Jurado

i to am having the same problem on my week old ipod classic did you manage to sort it out?? if so HELP please

WLC 5508, DHCP Problem after Update Cisco ASA(DHCP-Server)

Hello,
our Problem is, our Apple Devices get no ip adress from our Cisco ASA Cluster(ASA 9.1.2) over Wireless(Cisco WLC 5508). All other devices(Windows, Android,...) work correct, without problems. Our WLC is in HA-Mode.
Does anybody have an Idea?
Thank you very much and Best regards,
Stefan

Hello again,
I hope this case is the solution.
https://supportforums.cisco.com/message/3942112#3942112
I will let you know after downgrade.
Best regards,
Stefan

IPad keeps rebooting itself after updating to iOS 8.3

Just updated an iPad 3 to iOS 8.3 from iOS 8.2 . Update took a while to install (over 20 minutes) and then the Apple logo appeared for a bit then the screen went black for about 10 minutes. The device was fine for a while and then started rebooting itself, hung on the Apple logo for about 10 minutes and now suddenly it came back. All apps were up to date. The device had not had any issues prior to the update. Has anyone else had this issue?
Thanks!

No, this is definitely an iOS 8.3 bug, Allen. I have an iPad mini (original, 24/12 old) and an iPhone 5 (not S, 18/12 old). Updated both from 8.2 to 8.3. I keep them and the apps up to date and run a tight ship.
Since the update, the iPhone has been behaving normally.
However, starting immediately after the update, the iPad has been rebooting: when you plug it into the power and it goes to sleep, it reboots itself. This NEVER ONCE happened before the 8.3 update -- and I think I started with this iPad on iOS5 or at least 6, with all the updates inbetween. If you want to use it again shortly after plugging it in, you have to wait about five-ten minutes (as other have reported). So far, it has always rebooted successfully. But you do have to put in your passcode in response to "you have to enter your passcode upon rebooting" message; and tell it to trust your current computer connect once again.
It just now rebooted itself once again when plugged into the computer USB port, while in the middle of a sync (the screen went to sleep). Not happy about that; potential to damage data.
I confirm: this NEVER happened before 8.3, and it now reliably happens EVERY TIME I plug the iPad into power and it goes to sleep. I have three power sources (computer USB, individual Apple charger, aftermarket reserve battery charter) and it happens with all of them.
As far as I can tell, it only reboots itself once per charger-plugin, and doesn't do so again until you unplug it and plug it back in again (somewhat confident, but not 100% sure, of that).
Hope that helps. The bug needs squashing, and soon.

My iPad suddenly started displaying "Searching" up in the top left corner and now the ipad reboots itself after about 2-5 minutes.

My iPad suddenly started displaying "searching" up in the top left corner of the screen and the wifi symbol is next to it and I am connected to the wifi. Prior to last weekend it used to display Verizon and everything was fine. After about 2-5 minutes the iPad suddenly reboots itself. Can anyone assist with this. Thank you

Have you tried rebooting the iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Why does my 2010 MBP keep restarting itself after upgrading to Yosemite?

This problem actually started once I upgraded to Mavericks - my MacBook Pro will randomly restart itself every 30 seconds - 15 minutes or so. I don't really have a good estimate of the occurrence though since it is so random and there seems to be no rhyme or reason. The only thing I can say is that it pretty much always restarts if I am resizing windows. When I upgraded to Yosemite from Mavericks, it kept restarting itself but now it restarts twice every time! It's added an additional restart in the middle of the boot up screen. I reformatted the drive, reinstalled the original software and then reinstalled all the software upgrades and the problem persists. I know I should probably take it in to see a Genius as my best guess is that there seems to be an error with the graphics card, but I'm a college student on a very tight budget, so if there's anything I can do myself to fix this that would be great! Any help is appreciated! Here is the text from the last kernel panic:
Anonymous UUID:       E6B16FAF-1824-023A-B5CE-668D925F5314
Wed Mar 18 10:08:39 2015
*** Panic Report ***
panic(cpu 3 caller 0xffffff7f86df8f63): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80abe80000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.8.6/src/AppleM uxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 3), Frame : Return Address
0xffffff8099fd30f0 : 0xffffff800412fe41
0xffffff8099fd3170 : 0xffffff7f86df8f63
0xffffff8099fd3250 : 0xffffff7f84dc3b9f
0xffffff8099fd3310 : 0xffffff7f84e8d18e
0xffffff8099fd3350 : 0xffffff7f84e8d1fe
0xffffff8099fd33c0 : 0xffffff7f8510c056
0xffffff8099fd34f0 : 0xffffff7f84eb082d
0xffffff8099fd3510 : 0xffffff7f84dca5f1
0xffffff8099fd35c0 : 0xffffff7f84dc80fc
0xffffff8099fd37c0 : 0xffffff7f84dc907a
0xffffff8099fd38a0 : 0xffffff7f863b3446
0xffffff8099fd38e0 : 0xffffff7f863c2dff
0xffffff8099fd3900 : 0xffffff7f863f1493
0xffffff8099fd3930 : 0xffffff7f863f14ed
0xffffff8099fd3970 : 0xffffff7f863c8a1f
0xffffff8099fd39c0 : 0xffffff7f86393027
0xffffff8099fd3a60 : 0xffffff7f8638eda1
0xffffff8099fd3a90 : 0xffffff7f8638c873
0xffffff8099fd3ad0 : 0xffffff80046ff00c
0xffffff8099fd3b60 : 0xffffff8004701163
0xffffff8099fd3bc0 : 0xffffff80046fe9c3
0xffffff8099fd3d00 : 0xffffff80041e4a87
0xffffff8099fd3e10 : 0xffffff8004133f8c
0xffffff8099fd3e40 : 0xffffff8004118a93
0xffffff8099fd3e90 : 0xffffff80041293bd
0xffffff8099fd3f10 : 0xffffff80042059fa
0xffffff8099fd3fb0 : 0xffffff8004236ea6
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.8.6)[BE610379-FAEA-3E8F-B6AF-F92B70B3C5CD]@0 xffffff7f86dea000->0xffffff7f86dfdfff
            dependency: com.apple.driver.AppleGraphicsControl(3.8.6)[76B001B1-30F1-3D72-B264-85D77B254C 2F]@0xffffff7f86de2000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f84ba9000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[56AD16B5-4F29-3F74-93E7-D492B3966DE2]@0xffffff 7f84924000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[619F6C9F-0461-3BA1-A75F-53BB0F87ACD3]@0 xffffff7f84d1c000
            dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[42706EB3-1447-3931-A668-FBAC58AAAA 7A]@0xffffff7f86de5000
         com.apple.nvidia.classic.NVDAResmanTesla(10.0)[796AE430-39FB-3255-8161-D52AFA28 EE2B]@0xffffff7f84d73000->0xffffff7f84fdcfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[56AD16B5-4F29-3F74-93E7-D492B3966DE2]@0xffffff 7f84924000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[E5A48E71-70F5-3B01-81D3-C2B037BBE80A]@0xff ffff7f84d63000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[619F6C9F-0461-3BA1-A75F-53BB0F87ACD3]@0 xffffff7f84d1c000
         com.apple.GeForceTesla(10.0)[3EA67900-B4A9-30BB-964D-0904DA5421CC]@0xffffff7f86 370000->0xffffff7f8643dfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[56AD16B5-4F29-3F74-93E7-D492B3966DE2]@0xffffff 7f84924000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[E5A48E71-70F5-3B01-81D3-C2B037BBE80A]@0xff ffff7f84d63000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[619F6C9F-0461-3BA1-A75F-53BB0F87ACD3]@0 xffffff7f84d1c000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f84d73000
         com.apple.nvidia.classic.NVDANV50HalTesla(10.0)[7FE40648-F15F-3E18-91E2-FDDDF4C DA355]@0xffffff7f84fe7000->0xffffff7f85290fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f84d73000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[56AD16B5-4F29-3F74-93E7-D492B3966DE2]@0xffffff 7f84924000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14C1510
Kernel version:
Darwin Kernel Version 14.1.0: Thu Feb 26 19:26:47 PST 2015; root:xnu-2782.10.73~1/RELEASE_X86_64
Kernel UUID: 270413F7-3B44-3602-894F-AC0D392FCF8E
Kernel slide:     0x0000000003e00000
Kernel text base: 0xffffff8004000000
__HIB text base: 0xffffff8003f00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 532984910286
last loaded kext at 408489077718: com.apple.filesystems.smbfs 3.0.0 (addr 0xffffff7f86edc000, size 389120)
last unloaded kext at 173431935264: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f8554a000, size 65536)
loaded kexts:
com.apple.filesystems.smbfs 3.0.0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.15.5
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 269.25
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.GeForceTesla 10.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleIntelHDGraphics 10.0.0
com.apple.driver.AppleMikeyDriver 269.25
com.apple.driver.AppleSMCLMU 2.0.7d0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHDGraphicsFB 10.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleMuxControl 3.8.6
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.driver.AppleUSBCardReader 3.5.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.3
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.driver.AppleUSBHub 705.4.2
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.AppleGraphicsDeviceControl 3.8.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 269.25
com.apple.kext.OSvKernDSPLib 1.15
com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
com.apple.iokit.IOSurface 97
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleHDAController 269.25
com.apple.iokit.IOHDAFamily 269.25
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.iokit.IOBluetoothFamily 4.3.2f6
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginFamily 5.8.1d38
com.apple.driver.AppleGraphicsControl 3.8.6
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.3
com.apple.iokit.IOUSBMassStorageClass 3.7.1
com.apple.driver.CoreStorage 471.10.6
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.3
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IO80211Family 710.55
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0

Just thought I would reply here in case anyone finds this post and has the same problem.
I downloaded this app: https://gfx.io/ and set my graphics card to "integrated only" and it has solved the problem. Just remember to always set it to "integrated only" if it's not already set to that after anytime you restart your computer.

WLC 5508 reboots itself after upgrading to 7.5.102.0

Similar Messages

Maybe you are looking for