WLC 5760; bloated output on client debug

Hi all,
recently I tried to debug a client on the 5760 WLC. When I entered the debug client mac <MAC_addr> command the WLC immediately started to throw WCM related debug outputs which did not have anything to do with the client debugging itself. It made it virtually impossible to do a real-time analysis when those messages obfuscate the truly necessary ones.
For reference those are the debug switches, which are enabled when doing client debug mac
Nova Platform:
        dot11/state debugging is on
        pem/events debugging is on
        ft/events debugging is on
        client/mac-addr debugging is on
        dot11/detail debugging is on
        mac/ filters[string 1234.5678.9ab] debugging is on
        dot11/error debugging is on
        dot11/mobile debugging is on
        pem/state debugging is on
I think it started, when we did the upgrade of all WLCs from 03.02 to 03.03, because those are the same switches, which were enabled before and where I did not see those messages.
Here is an example of the bloat:
Jan 21 08:53:37 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_1> AP: <RND_AP_MAC_1> -00 thread:-114267280
Jan 21 08:53:37 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_1> AP: <RND_AP_MAC_1> -00 thread:-114267280
Jan 21 08:53:37 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:37 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_2> AP: <RND_AP_MAC_2> -00 thread:-114267280
Jan 21 08:53:37 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:37 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_2> AP: <RND_AP_MAC_2> -00 thread:-114267280
Jan 21 08:53:37 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:37 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:37 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:37 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: LLM-SPI: local handle: d000016, remote handle:83000007, group handle: cc000006
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: LLM-SPI: Sent LLM client Add to FED.
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_3> AP: <RND_AP_MAC_3> -00 thread:-114268168
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_3> AP: <RND_AP_MAC_3> -00 thread:-114268168
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Epm spi response(12)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: EPM: Session create resp - client handle 49be00000930ac session 7d010ca7
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: EPM: Netflow session create resp - client handle 49be00000930ac sess 7d010ca7
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Epm spi response(12)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: EPM: Init feature, client handle 49be00000930ac session 7d010ca7 authz 9a06002f
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: EPM: Activate feature client handle 49be00000930ac sess 7d010ca7 authz 9a06002f
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Epm spi response(12)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_4> AP: <RND_AP_MAC_4> -00 thread:-114267280
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_4> AP: <RND_AP_MAC_4> -00 thread:-114267280
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: EPM: Policy enforcement - client handle 49be00000930ac session ba020080 authz 9a06002f
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: EPM: Netflow policy enforcement - client handle 49be00000930ac sess ba020080 authz 9a06002f msg_type 0 policy_status 0 attr len 0
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Epm spi response(12)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: WCDB_IIF: Ack Message ID: 0x7f5c0000092c50 code 1003
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_5> AP: <RND_AP_MAC_5> -00 thread:-114268168
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Load Balancer: Success, Resource allocated are: Active Switch number: 1, Active Asic number : 2, Reserve Switch number 2 Reserve Asic number 2. AP Asic num 1
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_5> AP: <RND_AP_MAC_5> -00 thread:-114268168
Jan 21 08:53:38 UTC: %IOSXE-7-PLATFORM: 1 process wcm: WCDB_IIF: Ack Message ID: 0x61cf40000930ae code 1001
Jan 21 08:53:39 UTC: %IOSXE-7-PLATFORM: 1 process wcm: LLM-SPI: local handle: d000016, remote handle:83000007, group handle: cc000006
Jan 21 08:53:39 UTC: %IOSXE-7-PLATFORM: 1 process wcm: LLM-SPI: Sent LLM client Add to FED.
Jan 21 08:53:39 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:39 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:39 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_6> AP: <RND_AP_MAC_6> -00 thread:-114267280
Jan 21 08:53:39 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_6> AP: <RND_AP_MAC_6> -00 thread:-114267280
Jan 21 08:53:40 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_3> AP: <RND_AP_MAC_7> -00 thread:-114267280
Jan 21 08:53:40 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_3> AP: <RND_AP_MAC_7> -00 thread:-114267280
Jan 21 08:53:40 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_7> AP: <RND_AP_MAC_8> -00 thread:-114268168
Jan 21 08:53:40 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Load Balancer: Success, Resource allocated are: Active Switch number: 1, Active Asic number : 1, Reserve Switch number 2 Reserve Asic number 1. AP Asic num 1
Jan 21 08:53:40 UTC: %IOSXE-7-PLATFORM: 1 process wcm: WCDB_IIF: Ack Message ID: 0x782ac0000930af code 1001
Jan 21 08:53:40 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_7> AP: <RND_AP_MAC_8> -00 thread:-114268168
Jan 21 08:53:40 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_8> AP: <RND_AP_MAC_9> -00 thread:-114268168
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_8> AP: <RND_AP_MAC_9> -00 thread:-114268168
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_8> AP: <RND_AP_MAC_9> -00 thread:-114268168
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: WCDB_IIF: Ack Message ID: 0x4c740000092b7a code 1003
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_9> AP: <RND_AP_MAC_10> -00 thread:-114268168
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_9> AP: <RND_AP_MAC_10> -00 thread:-114268168
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: WCDB_IIF: Ack Message ID: 0x65088000093055 code 1003
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:41 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_10> AP: <RND_AP_MAC_11> -01 thread:-114267280
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_10> AP: <RND_AP_MAC_11> -01 thread:-114267280
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_11> AP: <RND_AP_MAC_12> -00 thread:-114268168
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_11> AP: <RND_AP_MAC_12> -00 thread:-114268168
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_12> AP: <RND_AP_MAC_13> -00 thread:-114267280
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_12> AP: <RND_AP_MAC_13> -00 thread:-114267280
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_13> AP: <RND_AP_MAC_13> -00 thread:-114267280
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_13> AP: <RND_AP_MAC_13> -00 thread:-114267280
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_14> AP: <RND_AP_MAC_14> -01 thread:-114268168
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_14> AP: <RND_AP_MAC_14> -01 thread:-114268168
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: LLM-SPI: local handle: d000016, remote handle:83000007, group handle: cc000006
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: LLM-SPI: Sent LLM client Add to FED.
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: LLM-SPI: local handle: d000016, remote handle:83000007, group handle: cc000006
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: LLM-SPI: Sent LLM client Add to FED.
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_15> AP: <RND_AP_MAC_15> -00 thread:-114267280
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_15> AP: <RND_AP_MAC_15> -00 thread:-114267280
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_15> AP: <RND_AP_MAC_15> -00 thread:-114267280
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_16> AP: <RND_AP_MAC_16> -01 thread:-114268168
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_16> AP: <RND_AP_MAC_16> -01 thread:-114268168
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Add SCB(3)
Jan 21 08:53:42 UTC: %IOSXE-7-PLATFORM: 1 process wcm: WCDB_IIF: Ack Message ID: 0x56eac000092f60 code 1003
Jan 21 08:53:43 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Processing assoc-req station: <RND_Client_MAC_17> AP: <RND_AP_MAC_13> -00 thread:-114267280
Jan 21 08:53:43 UTC: %IOSXE-7-PLATFORM: 1 process wcm: PEM recv processing msg Del SCB(4)
Jan 21 08:53:43 UTC: %IOSXE-7-PLATFORM: 1 process wcm: Sending assoc-resp station: <RND_Client_MAC_17> AP: <RND_AP_MAC_13> -00 thread:-114267280
Does anyone know how to filter them out?
Best Regards,
Patrick

After checking on each single debug together with the client mac filter it apparently seems the latter is not working and thus shows the debug for all connected clients.
Regards,
Patrick

Similar Messages

WLC 5760 - MAC Filtering wireless clients

Hi,
Does anyone ever deployed mac-filtering authentication to wireless clients in the WLC 5760?
I've configured a WLAN for Mac-filtering authentication only (named it as "macauth"):
wlan RNVDOS 4 RNVDOS
aaa-override
no broadcast-ssid
client vlan RNVDOS
mac-filtering macauth
no security wpa
no security wpa akm dot1x
no security wpa wpa2
no security wpa wpa2 ciphers aes
session-timeout 1800
no shutdown
Then, below Configuration->Security->MAC Filtering I've added several MAC addresses i.e. :
MAC Address: 88532e9ef70a Attribute List: macauth
Which turned out to be display in the CLI as:
username 88532e9ef70a mac aaa attribute list macauth
The problem is that whenever I try to associate the wireless client 88532e9ef70a, the client passes to the exclusion list.:
Sep 16 10:54:55.603: 8853.2E9E.F70A Adding mobile on LWAPP AP 0C68.03EA.4070 (1) 1 wcm: E9E.F70A (.t^GwtSessionID: 0afe01fbtQ^GwH^Cnz^Gw00dd) was added to ^G$h\225v^K
Sep 16 10:54:55.603: 8853.2E9E.F70A Creating WL station entry for client - rc 0 1 wcm:
Sep 16 10:54:55.603: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: (.t^GwtSessionID: 0afe01fbtQ^GwH^Cnz^Gw00dd) was added to ^G$h\225v^K
Sep 16 10:54:55.603: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: ssionID: 0afe01fbtQ^GwH^Cnz^Gw00dd) was added to ^G$h\225v^K
Sep 16 10:54:55.603: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw00dd) was added to ^G$h\225v^K
Sep 16 10:54:55.603: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.603: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.603: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.603: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: ^G$h\225v^K
Sep 16 10:54:55.603: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:55.603: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:55.603: 8853.2E9E.F70A STA - rates (8): 1 wcm: 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
Sep 16 10:54:55.603: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
Sep 16 10:54:55.603: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Idle to AAA Pending
Sep 16 10:54:55.603: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:55.604: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:55.604: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070 from Idle to AAA Pending
Sep 16 10:54:55.604: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:55.604: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 18) in 10 seconds
Sep 16 10:54:55.813: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: n.t^Gwseconds
Sep 16 10:54:55.813: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
Sep 16 10:54:55.813: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw 0C68.03EA.4070 f^G$h\225v^K
Sep 16 10:54:55.813: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.813: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.813: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.813: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
Sep 16 10:54:55.813: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:55.813: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:55.813: 8853.2E9E.F70A STA - rates (8): 1 wcm: 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
Sep 16 10:54:55.813: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
Sep 16 10:54:55.813: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:55.813: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:55.814: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:55.814: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:55.814: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:55.814: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 18) in 10 seconds
Sep 16 10:54:56.520: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: n.t^Gwseconds
Sep 16 10:54:56.520: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
Sep 16 10:54:56.520: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw 0C68.03EA.4070 f^G$h\225v^K
Sep 16 10:54:56.520: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.520: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.520: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.520: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
Sep 16 10:54:56.520: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:56.520: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:56.520: 8853.2E9E.F70A STA - rates (8): 1 wcm: 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
Sep 16 10:54:56.520: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
Sep 16 10:54:56.520: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.520: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:56.521: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:56.521: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.521: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:56.521: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 18) in 10 seconds
Sep 16 10:54:56.729: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: n 10 seconds
Sep 16 10:54:56.729: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
Sep 16 10:54:56.729: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:56.729: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.729: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.729: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.729: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: from AAA Pending to Authenticated
Sep 16 10:54:56.729: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:56.729: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:56.729: 8853.2E9E.F70A STA - rates (8): 1 wcm: 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
Sep 16 10:54:56.729: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
Sep 16 10:54:56.729: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.729: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:56.730: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:56.730: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.730: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:56.730: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 18) in 10 seconds
Sep 16 10:54:56.937: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: n.t^Gwseconds
Sep 16 10:54:56.937: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
Sep 16 10:54:56.937: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw 0C68.03EA.4070 f^G$h\225v^K
Sep 16 10:54:56.937: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.937: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.937: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.937: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
Sep 16 10:54:56.937: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:56.937: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:56.937: 8853.2E9E.F70A STA - rates (8): 1 wcm: 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
Sep 16 10:54:56.937: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
Sep 16 10:54:56.937: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.937: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:56.937: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:56.937: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.937: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:56.937: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 18) in 10 seconds
Sep 16 10:54:57.143: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: n.t^Gwseconds
Sep 16 10:54:57.143: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
Sep 16 10:54:57.143: 8853.2E9E.F70A apChanged 1 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw 0C68.03EA.4070 f^G$h\225v^K
Sep 16 10:54:57.143: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:57.143: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:57.143: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:57.143: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
Sep 16 10:54:57.143: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:57.143: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:57.143: 8853.2E9E.F70A STA - rates (8): 1 wcm: 130 132 139 150 12 18 24 36 0 0 0 0 0 0 0 0
Sep 16 10:54:57.143: 8853.2E9E.F70A STA - rates (12): 1 wcm: 130 132 139 150 12 18 24 36 48 72 96 108 0 0 0 0
Sep 16 10:54:57.144: 8853.2E9E.F70A 0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [ 0C68.03EA.4070 ] 1 wcm: site 'renova', interface 'RNVDOS'
Sep 16 10:54:57.144: 8853.2E9E.F70A Updated location for station old AP 0C68.03EA.4070 -1, new AP 0C68.03EA.4070 -0 1 wcm: va', interface 'RNVDOS'
Sep 16 10:54:57.144: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: P 0C68.03EA.4070 -0
Sep 16 10:54:57.144: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:57.144: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:57.144: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
Sep 16 10:54:57.145: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 0 1 wcm: 68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:57.145: 8853.2E9E.F70A apfBlacklistMobileStationEntry2 (apf_ms.c: 1 wcm: 6129) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Exclusion-list (1)
Sep 16 10:54:57.145: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 44) in 10 seconds
Sep 16 10:54:57.145: 8853.2E9E.F70A client is added to the exclusion list, reason 1 1 wcm: d: 44) in 10 seconds
Sep 16 10:54:57.145: *apfReceiveTask: 1 wcm: %APF-4-ADD_TO_BLACKLIST_REASON: Client 8853.2E9E.F70A (AuditSessionID: 0afe01fb5236e37f000000de) was added to exclusion list. Reason: 802.11 association failure
Sep 16 10:54:57.836: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion 1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
Sep 16 10:54:58.533: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion 1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
Sep 16 10:54:59.231: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion 1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
Sep 16 10:54:59.922: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion 1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
Sep 16 10:55:06.972: 8853.2E9E.F70A apfMsExpireCallback (apf_ms.c: 1 wcm: 664) Expiring Mobile!
Sep 16 10:55:06.972: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 46) in 60 seconds
Sep 16 10:55:06.972: 8853.2E9E.F70A apfMsExpireMobileStation (apf_ms.c: 1 wcm: 7067) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Exclusion-list (1) to Exclusion-list (2)
Sep 16 10:55:06.972: 8853.2E9E.F70A 0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [ 0C68.03EA.4070 ] 1 wcm: 3.2E9E.F70A on AP 0C68.03EA.4070 from Exclusion-list (1) to Exclusion-list (2)
Sep 16 10:55:06.972: 8853.2E9E.F70A 0.0.0.0 START (0) FastSSID for the client [ 0C68.03EA.4070 ] NOTENABLED 1 wcm: E9E.F70A on AP 0C68.03EA.4070 from Exclusion-list (1) to Exclusion-list (2)
Sep 16 10:55:06.972: 8853.2E9E.F70A Incrementing the Reassociation Count 1 for client (of interface RNVDOS) 1 wcm: D
Sep 16 10:55:06.972: 8853.2E9E.F70A Clearing Dhcp state for station --- 1 wcm: for client (of interface RNVDOS)
WLC1#
WLC1#
Kind Regards,
Vasco

Hi Patrick,
Thank you for sharing your solution. It didn't solved entirely the problem but you pointed to the right direction!
They are caused, because the system searches for an aaa authorization list, which is not configured.
To resolve this configure the following
aaa authorization network mac-filter local
where mac-filter is the name you defined in the SSID.
I've used your sugestion to create an aaa local authorization list but instead of naming it with the SSID, I've used the name of the attribute list ( macauth ) and it solved the problem:
aaa authorization network macauth local
username 88532e9ef70a mac aaa attribute list macauth
wlan RNVDOS 4 RNVDOS
client vlan RNVDOS
mac-filtering macauth
WLC1#sh wireless client summ
Number of Local Clients : 1
MAC Address    AP Name                          WLAN State              Protocol
8853.2e9e.f70a APf872.ead7.31da                 4    UP                 11n(5)
Cheers,
Vasco

WLC 5760 - show client ccx roam-history

Hi,
We're running an WLC 5760 with the latests version (3.3.1). We have several wlans, with diferent authentication methods, and they are all working fine.
However we noticed that the roaming is working correctly but no information is displayed if the "show ccx roam-history".
WLC1#sh wireless client mac-address 8853.2e9e.f70a det | i CCX
Client CCX version : 4
WLC1#debug dot11 ccx-roam all
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Mobile 8853.2e9e.f70a associated
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending Neighbor List packet to Mobile 8853.2e9e.f70a
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending L2Roam Packet to mobile 8853.2e9e.f70a
Dec 12 17:11:40.963: 00000000: 1 wcm: 01 1a 33 81 88 53 2e 9e f7 0a c0 25 5c 68 50 50 ..3..S.....%\hPP
Dec 12 17:11:40.963: 00000010: 1 wcm: 28 11 c0 25 5c 68 50 50 01 00 02 01 06 ab 0d 0d (..%\hPP........
Dec 12 17:11:40.963: 00000020: 1 wcm: 03 b8 05 28 11 c0 25 5c ec 05 a0 0b 00 07 01 06 ...(..%\........
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000030: ab 0d 0d 03 b8 05 28 11 0c 68 03 ea 52 10 06 00 ......(..h..R...
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000040: 07 01 06 ab 0d 0d 03 b8 05 28 11 0c 68 03 d6 e4 .........(..h...
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000050: 00 0b 00 07 01 06 ab 0d 0d 03 b8 05 28 11 0c 68 ............(..h
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000060: 03 4d d0 60 01 00 07 01 06 ab 0d 0d 03 b8 05 28 .M.`...........(
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000070: 11 0c 68 03 ea 40 70 01 00 07 01 06 ab 0d 0d 03 ..h..@p.........
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000080: b8 05 28 11 0c 68 03 ea 4b 10 01 00 07 01 06 ab ..(..h..K.......
Dec 12 17:11:40.963: 00000090: 1 wcm: 0d 0d 03 b8 05 28 11 c0 25 5c 68 50 5f 3c 01 04 .....(..%\hP_<..
Dec 12 17:11:40.964: 000000a0: 1 wcm: 01 06 ab 12 12 03 b8 05 28 11 c0 25 5c ec 05 af ........(..%\...
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 000000b0: 24 01 07 01 06 ab 12 12 03 b8 05 28 11 0c 68 03 $..........(..h.
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 000000c0: ea 52 1f 24 01 07 01 06 ab 12 12 03 b8 05 28 11 .R.$..........(.
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 000000d0: 0c 68 03 ea 4b 1f 38 01 07 01 06 ab 12 12 03 b8 .h..K.8.........
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 000000e0: 05 28 11 0c 68 03 d6 e4 0f 38 01 07 01 06 ab 12 .(..h....8......
Dec 12 17:11:40.964: 000000f0: 1 wcm: 12 03 b8 05 28 11 c0 25 5c a3 f4 8f 30 01 07 01 ....(..%\...0...
WLC1#
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 00000100: 06 ab 12 12 03 b8 05 28 11 0c 68 03 ea 40 7f 30 .......([email protected]
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 00000110: 01 07 01 06 ab 12 12 03 b8 05                    ..........
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Received Neighbor List Request from Mobile 8853.2e9e.f70a
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending Neighbor List packet to Mobile 8853.2e9e.f70a
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending L2Roam Packet to mobile 8853.2e9e.f70a
Dec 12 17:12:51.006: 00000000: 1 wcm: 01 1a 33 81 88 53 2e 9e f7 0a c0 25 5c 68 50 50 ..3..S.....%\hPP
Dec 12 17:12:51.006: 00000010: 1 wcm: 28 11 c0 25 5c 68 50 50 01 00 02 01 06 ab 0d 0d (..%\hPP........
Dec 12 17:12:51.006: 00000020: 1 wcm: 03 b8 05 28 11 c0 25 5c ec 05 a0 0b 00 07 01 06 ...(..%\........
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000030: ab 0d 0d 03 b8 05 28 11 0c 68 03 ea 52 10 06 00 ......(..h..R...
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000040: 07 01 06 ab 0d 0d 03 b8 05 28 11 0c 68 03 d6 e4 .........(..h...
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000050: 00 0b 00 07 01 06 ab 0d 0d 03 b8 05 28 11 0c 68 ............(..h
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000060: 03 4d d0 60 01 00 07 01 06 ab 0d 0d 03 b8 05 28 .M.`...........(
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000070: 11 0c 68 03 ea 40 70 01 00 07 01 06 ab 0d 0d 03 ..h..@p.........
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000080: b8 05 28 11 0c 68 03 ea 4b 10 01 00 07 01 06 ab ..(..h..K.......
Dec 12 17:12:51.006: 00000090: 1 wcm: 0d 0d 03 b8 05 28 11 c0 25 5c 68 50 5f 3c 01 04 .....(..%\hP_<..
Dec 12 17:12:51.006: 000000a0: 1 wcm: 01 06 ab 12 12 03 b8 05 28 11 c0 25 5c ec 05 af ........(..%\...
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 000000b0: 24 01 07 01 06 ab 12 12 03 b8 05 28 11 0c 68 03 $..........(..h.
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 000000c0: ea 52 1f 24 01 07 01 06 ab 12 12 03 b8 05 28 11 .R.$..........(.
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 000000d0: 0c 68 03 ea 4b 1f 38 01 07 01 06 ab 12 12 03 b8 .h..K.8.........
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 000000e0: 05 28 11 0c 68 03 d6 e4 0f 38 01 07 01 06 ab 12 .(..h....8......
Dec 12 17:12:51.006: 000000f0: 1 wcm: 12 03 b8 05 28 11 c0 25 5c a3 f4 8f 30 01 07 01 ....(..%\...0...
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000100: 06 ab 12 12 03 b8 05 28 11 0c 68 03 ea 40 7f 30 .......([email protected]
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000110: 01 07 01 06 ab 12 12 03 b8 05                    ..........
Dec 12 17:15:48.712: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Received Neighbor List Request from Mobile 8853.2e9e.f70a
Dec 12 17:15:48.712: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending Neighbor List packet to Mobile 8853.2e9e.f70a
Dec 12 17:15:48.712: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending L2Roam Packet to mobile 8853.2e9e.f70a
Dec 12 17:15:48.712: 00000000: 1 wcm: 01 07 33 81 88 53 2e 9e f7 0a c0 25 5c 68 81 20 ..3..S.....%\h..
Dec 12 17:15:48.712: 00000010: 1 wcm: 28 11 c0 25 5c 68 81 20 01 00 02 01 06 ab 0d 0d (..%\h..........
Dec 12 17:15:48.712: %IOSXE-7-PLATFORM: 1 process wcm: 00000020: 03 b8 05 28 11 0c 68 03 ea 52 10 06 00 07 01 06 ...(..h..R......
Dec 12 17:15:48.712: %IOSXE-7-PLATFORM: 1 process wcm: 00000030: ab 0d 0d 03 b8 05 28 11 0c 68 03 ea 4a f0 0b 00 ......(..h..J...
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 00000040: 07 01 06 ab 0d 0d 03 b8 05 28 11 0c 68 03 d6 eb .........(..h...
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 00000050: 20 01 00 07 01 06 ab 0d 0d 03 b8 05 28 11 c0 25 ............(..
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 00000060: 5c ec 05 a0 0b 00 07 01 06 ab 0d 0d 03 b8 05 28 \..............(
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 00000070: 11 0c 68 03 d6 e4 00 0b 00 07 01 06 ab 0d 0d 03 ..h.............
Dec 12 17:15:48.713: 00000080: 1 wcm: b8 05 28 11 c0 25 5c 68 50 50 01 00 07 01 06 ab ..(..%\hPP......
Dec 12 17:15:48.713: 00000090: 1 wcm: 0d 0d 03 b8 05 28 11 c0 25 5c 68 81 2f 38 01 04 .....(..%\h./8..
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 000000a0: 01 06 ab 12 12 03 b8 05 28 11 0c 68 03 ea 4a ff ........(..h..J.
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 000000b0: 2c 01 07 01 06 ab 12 12 03 b8 05 28 11 0c 68 03 ,..........(..h.
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 000000c0: ea 52 1f 24 01 07 01 06 ab 12 12 03 b8 05 28 11 .R.$..........(.
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 000000d0: 0c 68 03 d6 e4 0f 38 01 07 01 06 ab 12 12 03 b8 .h....8.........
Dec 12 17:15:48.713: 000000e0: 1 wcm: 05 28 11 c0 25 5c ec 05 af 24 01 07 01 06 ab 12 .(..%\...$......
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 000000f0: 12 03 b8 05 28 11 0c 68 03 d6 eb 2f 3c 01 07 01 ....(..h.../<...
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 00000100: 06 ab 12 12 03 b8 05                              .......
WLC1#show wireless client mac-address 8853.2e9e.f70a ccx roam-history
Shouldn't the output be the same as the AireOS command "show client roam-history client-mac"?
Kind regards,
Vasco Costa

Obtaining CCX Client Roaming Information (CLI)
Step 1
View the current RF parameters configured for client roaming for the 802.11a or 802.11b/g network by entering this command:show {802.11a | 802.11b} l2roam rf-param
Step 2
View the CCX Layer 2 client roaming statistics for a particular access point by entering this command:show {802.11a | 802.11b} l2roam statistics ap_mac
This command provides the following information:
The number of roam reason reports received
The number of neighbor list requests received
The number of neighbor list reports sent
The number of broadcast neighbor updates sent
Step 3
View the roaming history for a particular client by entering this command:show client roam-history client_mac
This command provides the following information:
The time when the report was received
The MAC address of the access point to which the client is currently associated
The MAC address of the access point to which the client was previously associated
The channel of the access point to which the client was previously associated
The SSID of the access point to which the client was previously associated
The time when the client disassociated from the previous access point
The reason for the client roam
Debugging CCX Client Roaming Issues (CLI)
If you experience any problems with CCX Layer 2 client roaming, enter this command:
debug l2roam [detail | error | packet | all] {enable | disable}

WLC 4400 : some of the clients are stuck in 802.1x REQD ( Auth - no but status is Associated ) in PEM process

Hi ,
I have wlc 4400 with 1010 AP's wireless set-up.
Everything is working fine but unfortunately , I am coming across with one issue that, clients are not getting authenticated.
If I see the status of respective client in WLC :
status : Associated
Auth : No
Policy manager : 802.1X REQD
I read about PEM ( Policy enforcement Module ) , as it is going through same procedure but policy manager should in " RUN " condition , Unfortunately it is not.
how do i resolve this issue ?

Hi Vinod,
The 802.1X_REQD state would suggest that the client cannot complete L2 authentication.
If possible, it would be helpful to collect the following debugs from the WLC while trying to connect the client:
debug client
debug aaa event enable
Also, please attach the full text output of the command "show run-config" and let us know the WLAN through which the client should be connecting.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

WLC 5760

Since i mentioned new to this tech,i deployed 2 WLC 5760 in network i connected one of Stack wise 480 cable in ring type.but my port is down state
when i give show switch stack-port summary both controllers are down state.
What could be the issue can any one suggest me.
Apart from the above issue i configured few of configuration please vlaidate it
wlan Guest-WbAuth 3 Guest-WbAuth
client vlan 100
mobility anchor 192.168.5.1
no security wpa
no security wpa akm dot1x
no security wpa wpa2
no security wpa wpa2 ciphers aes
security web-auth
security web-auth authentication-list EXT_AUTH ---- need more information ?
security web-auth parameter-map webparalocal -need more information ?
no shutdown
2. Redudancy configuration
conf t
service internal
redundancy
main-cpu
standby console enable
end
session standby ios
please validate this

Please follow the startup procedure:
http://www.cisco.com/c/en/us/td/docs/wireless/technology/5760_deploy/CT5760_Controller_Deployment_Guide/CT5760_Centralized_Configuration_eg.html#pgfId-1071864

External AAA for WLC 5760

Hi, I have WLC 5760 on mode Centralized because I don't have Switch 3850. I need to implement dot1x authentication using external AAA Server which is in my case is Active Directory on Windows 2012 Server. You can see my configuration in pictures i attached bellow. My problem is authentication is always failed.
Can you give me a hint ?
AAA Server
Authentication
LDAP
WLAN Security L2
WLAN Security L3
ERROR Log
Thanks

Complete these steps in order to add the WLC as an AAA client in the ACS.
From the ACS GUI, choose the Network Configuration tab.
Under AAA Clients, click Add Entry.
In the Add AAA Client window, enter the WLC host name, the IP address of the WLC, and a shared secret key. See the example diagram under step 5.
From the Authenticate Using drop-down menu, choose RADIUS .
Click Submit + Restart in order to save the configuration.

Wlc 5760 - wlan configuration

I have a WLC 5760 and i did below configuration for WLAN:
wlan 3 85 GUESTS
client vlan 85
no security wpa
no security wpa akm dot1x
no security wpa wpa2
no security wpa wpa2 ciphers aes
session-timeout 1800
no shutdown
the ap is joined with WLC:
EFFAT-WLC#show ap summary
Number of APs: 4
Global AP User Name: Not configured
Global AP Dot1x User Name: Not configured
AP Name AP Model Ethernet MAC Radio MAC State
APAP16.0009.abdc 3702I 1616.9999.8888 3c12.f123.0000 Registered
* have changed the mac address
but still i am not able to get the WLAN on the wireless clients. SSID is been broadcasted but when scanned on the client i am not getting it.

Are you using any radius server ???
if yes then use this commands: aaa-override
Check this config :
http://www.cisco.com/c/en/us/td/docs/wireless/technology/5760_deploy/CT5760_Controller_Deployment_Guide/Secure_WLAN_Configuration_on_Catalyst_3850WLC5508.html
Hope it ehlps.
Regards
Dont forget to arte helpful posts

WLC 5760 AUTHMGR-5-FAIL log

I am using the WLC 5760
My SSID use WPA2 PSK and i don't use ISE or Radius or AAA to authentication
Some client can connect to the AP,but can not ping the gateway
When i show logging from WLC,it will see the log like
%AUTHMGR-5-FAIL: Authorization failed or unapplied for client
How do i resolve this problem
Thank's

Hi,
Have you made sure that the appropriate vlans are permitted on the trunk between the WLC and the switch?
Normally the gateway is an SVI on a core switch, so if the vlan is not permitted, you wouldn't be able to ping the gateway.
HTH
Mike

%AUTHMGR-4-UNAUTH_MOVE messages in WLC 5760

Hi,
We're getting this messages on a WLC 5760:
Mar 7 14:24:32.136: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (0011.21c2.1f2f) from Ca7 to Ca44
Mar 7 14:24:53.148: %AUTHMGR-4-UNAUTH_MOVE: (slow) MAC address (0011.21c2.115f) from Ca15 to Ca22
Mar 7 14:47:40.142: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (0011.21c2.1fd9) from Ca9 to Ca44
Mar 7 14:50:40.290: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (0011.21c2.1f6e) from Ca43 to Ca31
Mar 7 14:50:46.398: %AUTHMGR-4-UNAUTH_MOVE: (slow) MAC address (0011.21c2.1f6e) from Ca31 to Ca43
Mar 7 14:51:02.109: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (0011.21c2.1f2f) from Ca44 to Ca43
Mar 7 14:54:34.961: %AUTHMGR-4-UNAUTH_MOVE: (slow) MAC address (0011.21c2.1f6e) from Ca22 to Ca41
We didn't found any information regarding the message in the 3800/5700 WLC documentation but in other products we've found this:.
#     Error Message    AUTHMGR-4-UNAUTH_MOVE, MSGDEF_LIMIT_MEDIUM: [chars] MAC address
     ([enet]) from [chars] to [chars]
          Explanation    There was an authenticated move on the old IDB. The first [chars] is slow or fast, the second [chars] is the source interface name, the third [chars] is the destination interface name, and [enet] is the MAC address.
          Recommended Action    No action is required.
Does anyone knows the meaning of these messages on the 5760 WLC? These clients are mounted in warehouse stackers, moving in the wharehouse with speeds between 10 and 40 Km/hour and sometimes we have complains of roaming issues. Are this messages related with roaming issues?
Kind regards,
Vasco

Hi Vasco,
These messages are related to roaming and it's an expected behaviour.
%AUTHMGR-4-UNAUTH_MOVE is expected to occur when a mac address is moved to another interface by reconnecting network devices.
Thanks,
Ashish

WLC 5760 - AP2600i failed to join ap-group after reboot

Hi,
We're deploying a couple of 2600i with an WLC 5760.
We've configured an AP group, named it "factory", and then issued the command ap name AP<ip mac address> ap-groupname factory for both APs. After the restart, both AP were on the AP-Group factory.
The problem is that is we reboot or power off the APs, one will join automatically the AP-Group factory and the other goes to default-group and requires the ap name APAPf872.ead7.31da ap-groupname factory to join the AP group factory again.
Any suggestion? Is it possible to forced the ap-group configuration directly on the cli of the AP?
WLC1#sh ap groups
Site Name: default-group
Site Description:
WLAN ID   WLAN Name                        Interface
AP Name                          Slots AP Model             Ethernet MAC      Location      Port                   Country Priority GroupName
Site Name: factory
Site Description:
WLAN ID   WLAN Name                        Interface               Radio
AP Name                          Slots AP Model             Ethernet MAC      Location      Port                   Country Priority
APf872.eaa6.fc69                 2     2602I                f872.eaa6.fc69 default location Te1/0/1                PT      1
APf872.ead7.31da                 2     2602I                f872.ead7.31da default location Te1/0/1                PT      1
debug ap group
(AP joining the apgoup factory)
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 1 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 2 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 3 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 4 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 5 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 6 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 7 for ap APf872.eaa6.fc69 apgroup factory
(AP joining the default-group)
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 1 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 2 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 3 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 4 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 5 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 6 for ap APf872.ead7.31da apgroup default-group
Kind regards,
Vasco Costa

We've used a another group of 2600i APs and it seems that this problem only occous with AP "APf872.ead7.31da" so this is not a WLC problem.
closing case

I cant not control wlc 5760 (every thing CLI & GUI)

After wlc 5760 reload (because of some problems.)
I don't know this message. and I can not control wlc 5760 in CLI console.
Please help me.
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-wlc01-confg (Timed out)
.... again & again
I try to booting. but I can't.
I want to know : method 5760 Factory default or normal booting mode.
+ log
FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found,FIPS Mode Not Enabled
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CT5760 (i686) processor with 10485760K bytes of physical memory.
Processor board ID FOC1746V2AK
2048K bytes of non-volatile configuration memory.
10485760K bytes of physical memory.
255000K bytes of Crash Files at crashinfo:.
3612840K bytes of Flash at flash:.
0K bytes of Dummy USB Flash at usbflash0:.
0K bytes of at webui:.
Base Ethernet MAC Address : 1c:1d:86:24:10:80
Motherboard Assembly Number : 73-14448-04
Motherboard Serial Number : FOC174577NZ
Model Revision Number : A0
Model Number : AIR-CT5760
System Serial Number : FOC1746V2AK
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-wlc01-confg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-.cfg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-wlc01-confg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-.cfg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-wlc01-confg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-.cfg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-wlc01-confg (Timed out)

I have same problem when i upgraded Cisco 3850 Switch to latest IOS. I have lost access to the console.
can someone please help.
Thanks

Open & executin a c prg in server & tranfer output to client

Please tell me how to execute a C program inside a Java program. That is, inside a server program in Java, and transfer the output of that program to the client and display it there...
if you can with sample program Tel me...

hi..
i want still more help..i tried it out not geting..
for examle i hav a c program lik
#include<stdio.h>
main()
       printf("hiii to first client");
then i store this program as file1.c
so if i execute this in c i get output hiii to first client..
Now how do i open file.c in server.java program and execute it ant transfer the output to client.
but in this server.java just transfers message to client but i want it o transfer file1.c output to client n when i open client.jav hiii to first client must be displayed..please tel me with code or modify in my code and tel me
Server.java program is as given below:
import java.io.*;
import java.net.*;
import java.util.*;
class MyRunnable implements Runnable
   public void run() {
   go();
public void go(){
try {
    String serversen;
   ServerSocket welcomeSocket=new ServerSocket(6789);
   while(true)
Socket connectionSocket=welcomeSocket.accept();
System.out.println("enter the mess to be sent to client");
BufferedReader inFromuser=new BufferedReader(new InputStreamReader(System.in));
DataOutputStream outToClient=new DataOutputStream(connectionSocket.getOutputStream());
serversen=inFromuser.readLine();
outToClient.writeBytes(serversen+'\n');
} catch(IOException ex) {
        ex.printStackTrace();
public class Server1{
public static void main(String argv[])
     Runnable threadJob=new MyRunnable();
Thread myThread=new Thread(threadJob);
myThread.start();
     Client.java is as shown below:
import java.io.*;
import java.net.*;
class Client
public static void main(String argv[]) throws Exception
          String modsen;
               Socket clientSocket=new Socket("192.168.1.2",6789);
             BufferedReader inFromServer=new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));
          modsen=inFromServer.readLine();
          System.out.println("FROM SERVER: " +modsen);
          clientSocket.close();
Now please help me..tel how to open the file1.c and execute it in server.java n send the output of file1.c only to client

Prime Infrastructure to manage WLC 5760 with IOS XE 03.03.03

Hi there Is IOS XE 03.03.03 on WLC 5760 to be managed via Prime infrastructure 2.1 or what version do I need? It seems to be not fully supported with 2.1... Thanks and best regards Dominic

Hi Dominic,
The release notes http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/release/notes/cpi_rn.html#pgfId-43893 show support of up to 03.03.02
I have got a 3850 WLC running on IOS XE 03.03.03 managed by Prime 2.1
The release might not be up to date. When the release notes for Prime 2.1 came out, the highest supported is 03.02.03 and a few days later got changed to 03.03.02.
Regards,
Jeen Chew

ISE Compatibility with WLC 5760

The ISE compatibility Matrix (June 5, 2013), does have a row for WLC 5760 in its tables.
The WLC 5760 Release Notes says it is compatible with with ISE without specfying which features.
Why is the WLC 5760 missing from the ISE Compat Matrix and how can I get specific ISE feature support (ie CoA, DACL).
Thanks.

Hello Marvin,
ISE 1.2 is in road map and it will be available till July 17, 2013 and that will support WLC 5760 and all the features which you are looking.

Custom WebAuth WLC 5760

I want to setup a custom webauth for my WLC 5760. I already downloaded the webauth bundle and put it in WLC via Command Download in WLC GUI. According to Guide, after the download completed, the custom page will appear in custom page dropdown for web parameter map.
But in my case it shows nothing. So where did I miss ?
Thank You

Hi
Pls refer this document
http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan-controllers/117728-configure-wlc-00.html
HTH
Rasika
**** Pls rate all useful responses ****

WLC 5760; bloated output on client debug

Similar Messages

Maybe you are looking for