WLC Channel Auto setting vs. Channel Manual

Hi,
Regarding the subject, anyone can enlighten me which one is better for setting the channel assignment of Lightweight on WLC?
Does it better to use "Auto" or manually setting the channel/power on each individual AP.
Thanks,

Thanks Scott.
Wondering about the accuracy of WLC's auto settings.
I observe two adjacent APs got a same channel and power assignment from the Controller. I am worry about interference caused by channel overlapping.
Sent from Cisco Technical Support iPhone App

Similar Messages

Dolby Digital Auto Setting Doesn't Work w/4.4.2?

I have a bunch of old movies that were recorded in stereo, pre-Dolby, and of course, a bunch of newer in Dolby Digital. After upgrading to Apple TV iOS 4.4.2 yesterday, I now find that the Settings/Audio & Video/Dolby Digital/Auto setting no longer works.
I just started a new iTunes downloaded movie with Dolby Digital 5.1 sound and noticed that it was playing in PCM stereo-only mode for some reason. I then tried a couple of other older iTunes downloaded movies with 5.1 sound, and they all were playing in the same old PCM stereo mode, as well. To get the new movie to play in 5.1 sound, I had to manually change the above Dolby Digital setting to ON.
A similar issue applies to older movies in pre-Dolby stereo. If the above setting is set to Dolby Digital ON, those older movies switch from normal stereo to Dolby Digital 1.0/Center channel only sound, so I have to either switch the Dolby Digital setting to OFF or back to Auto, which defaults to PCM stereo for everything now.
Is anyone else experiencing this change? The Auto function worked perfectly for me before this upgrade.
I'm using an Apple TV 2 with an optical connection to my audio amplifier. The movie is streaming over my wired gigabit Ethernet home network from my iMac.

Seems to be an issue for some of us since 4.4; see other thread.
https://discussions.apple.com/message/16447970#16447970

How do I auto set stroke weight, stroke colors & fill color?

Hi,
I'd like to make it easier for our 100,000 designers to use AI to make custom products using a laser cutter.
Current Practice
Designers open our AI laser cutting design templates, add their designs using the AI settings our online pricing system can read, then upload their designs to our website for instant pricing, making and shipping.
The Problem
Designers have to manually setup AI with settings that can be read by our online pricing system. If they get these settings wrong, our system can not read their designs. So they are rejected and can not be priced or made. This happens more often that you'd imagine.
The Solution
Designers do not like design rejections. So I'd like to eradicate them by providing our designers with a version of AI that provides the following settings only:
* Set document to RGB
* Stroke weight = 0.01mm
* Stroke colors = RGB 0, 0, 255 and 255, 0, 0
* Fill color = RGB 0, 0, 0
This will mean designers have a very limited number of AI choices, with nothing to distract them or to get wrong. Which will result in less (or zero?) design rejections. And products made faster than before. Rejoice!
Question
How do we program our AI laser cutting design templates so that when they are opened in AI, they auto set AI settings as defined above?
Thanks so much.
Derek

Ponoko wrote:
Your first point - yes, that's what our system does currently. As a result designers get lots of 'how to fix' messages as a result of design rejections. We wish to reduce these rejections and resulting 'how to fix' messages by limiting their choices in AI - because this is where the problems are created.
Ok, yeah gotcha, so customers/designers think they do it right (cough/laugh) upload, then get surprised to find out they didn't by your upload system. That's kind of what I thought. I feel your pain. ;-) I sense you want to reduce this aspect to keep the customers/designers happy and thinking they do nothing but work magic all day right? ;-) So you don't want to lose customers in the midst of frustration of file rejection thinking there files are right and your system is certainly wrong, when in fact it's the opposite. Good luck explaining that to a designer however, right? ;-)
Ponoko wrote:
Your second point - You go on to talk about using a complex "action" we could distribute within the design templates. Although I suspect this is different, the path we're thinking is to include something in the templates that, when imported into AI, sets AI with the color palette we need, line weight we need. Possible?
As Monika hinted at you can't rigidly restrict or control what a user is allowed to do and use in Illustrator. You can try to reduce the parameters by saving the file as a Template.ait file, but even then they can muck about all day until they mess things up again, plus you have no control whatsoever even then as to whether they use fills, the stroke weights, etc. That is why I mentioned various things to manipulate the file once they deem it completed and ready to submit/upload. Basically a method to fix what they messed up or did incorrectly and instead set things as they should be for submission as I previously mentioned. I mentioned you may be able to create a complex Illustrator "action" action.aia that they run to process these requirements. I am not sure if such an action could be accomplished as all inclusive (perhaps though) otherwise you could as stated do it through scripting and a script they run: script.jsx to prepare the requirements, or an actual standalone helper app you create and provide like I mentioned above as well.
I see for CorelDRAW & Inkscape you require SVG, why not change that for Illustrator also so all your 2D app submissions are SVG based? Then manipulate the SVG server side, point out the changes and why and have the customer approve the new modified SVG Preview of the needed changes and move along with the process from there? Make all the requirement changes on the server by manipulating the SVG. You should have access to all of the requirements: RGB color model, stroke weight, stroke colors, fill colors, create font outlines, image tracing? I am just tossing out ideas here, get your programmers busy, tell them to stop playing video games and "make it so". ;-)
But even so, this then begs the question: What are you doing to circumvent the same issues for inept CorelDraw and Inkscape users?
Since, they have the same freedom to do things incorrectly and misaligned with the requirements, just as Illustrator users do.
Regardless though of the approach customers/designers may not like seeing certain things changed even minutely in trivial amounts and thusly be just as upset or up in arms with the changes to their pretty design files that they think were not needed in the first place, how dare you undermine them ;-). Same as seeing the file rejection from your system upon upload. Again I feel your pain. You have your Application/File requirements requirements stated nicely and plainly, it should be pretty easy for most, but sadly I guess not.

ICal auto-setting random & ridiculously timed reminders in OSX

I purchased a new iMac a couple of months ago with the new OSX installed. My macbook has Snow Leopard still and works fine..
For some reason my iCal is auto-setting reminders at the most random and ridiculous reminder times. Sometimes its 1390 minutes, other times it may be 1600 minutes or 975 minutes. Its the most insane thing ever and I can't figure out A. Why its happening or B. What's causing the random numbers, as of right now they seem to be just that- random.
I'm so incredibly annoyed b/c I have to set a time and then manually go in and change each and every one. And as far as I can see via my multiple searches, I can't find anyone that has the same problem.
I've tried:
- deleting my calendar and re-adding (I sync with Google Apps).
- Setting a default alert for 15 mins prior in settings
To no avail none of these work. Its such a pain in my *** that I'm contemplating downgrading to Snow Leopard. Any suggestions before I take that extreme measure?

Hello ~
I know this is an old post, but I'm hoping you are still out there John Maisey...? I followed the instructions on your link several times, however my reminders still come up as a message at 4:50pm the day before, plus an email at 4:50pm the day before.
I would like to set it up so that when I create a new event in my calendar, the default reminder time is at 8am that day. Message only, no email.
And the time it is set for is an hour ahead of the time I am creating the new event (i.e., if it is 12 noon when I open a new calendar appt, the default time for this appt sets at 1pm).
Is there a way to do these two things?
I am using iCal Version 5.0.3 / Mac OS X Version 10.7.5 (MacBook Air purchased in December of 2012).
Thank you!
Annette

How Do You Set Mail To 'Manual' ?

Never had problem with iPhone until yesterday. I am not receiving 'push' e-mail anymore. I did not do any changes to the iPhone at all. Any e-mail now I have to go to inbox and click on the curved arrow symbol at bottom left of page in order to load the waiting e-mails. In a different posting someone mentioned to test 'push' function by setting e-mail to 'manual' and then sending your Yahoo account an e-mail from your computer (I assume using a different e-mail service). In the 'settings' menu for 'mail' I do not see where you set for 'manual'. How do you set mail to 'manual' setting? And do you think I should just RESET the iPhone (using the iPhone or hooking it up to iTunes on the computer to RESET) ?

I have no other e-mail accounts set up. Anyway I did RESET my iPhone (using the RESET button on the iPhone) and all is well again (how long I do not know). My e-mails are being 'pushed' again so that I can see from the main menu the little red dots (with the numerals inside) showing how many e-mails are waiting for me. I love this feature. I had 'push' e-mail on my ex-Blackberry. BUT, I do not see the AUTO-CHECK anywhere. I am heading over to the Apple Techies at my local Apple store to ask them about this missing AUTO-CHECK. I have a feeling you need two account set up on your iPhone for this feature to appear. I could be wrong. Thanks, everybody........

Auto Set the Volume for Music and Podcast?

I would like to automatically set the volume adjustment (+100%) for all my music and podcasts.
I get 1-2 podcasts everyday and have to manually set the volume after they have downloaded (Get Info->Options)
I can make mass changes by selecting multiple items - but what I hope to do is make a setting so that all new music/podcast etc are auto set to this volume.
I use open headphones outside a lot and some of the podcasts cannot be heard even on max volume slider. Adjusting the volume works fine but as I mentioned I do it manually
Hope you can help
P.

thanks for the link but unfortunately it doesn't help. I think my IMovie 08 might be corrupted or something. Because nothing can reduce the imported audio track's volume. I might need to take it to back to my store and ask them to have a look at it.

Auto-set Conditional Build Tags Based On Style?

Is there a way to auto-set conditional build tags based on style?
I want to be able to import a Word document into RoboHelp and have it recognize certain styles as requiring certain conditional tags. For example, an imported Word document might have a style called WD_Internal and any text with that style would automatically have a conditional build tag assigned to it. The idea is to allow my SMEs to indicate which text is intended for internal audiences and which text is OK for customer consumption in a single central Word document using styles. When the content is correct, I'd import it into RoboHelp, have RoboHelp assign conditional build tags, then generate multiple printed versions of the document (an internal version and a public consumption version).
Setting conditional build tags is pretty easy, but it will still be a lot of work to manually set them. Is there a way to do this automatically?
I am using RoboHelp HTML RH9.

Hi,
There's no way to do this through the interface. You can however create a script to do this for you. Cycle through the content of the topics and insert the code for the CBT.
Greet,
Willam

P6N SLI Platinum- Cannot set Memory Speed -Manual/Linked

It doesn't seem to matter whether I have the memory set to Linked or Manual- I get the Linked setting in any OC setup. ??? At stock AUTO, it puts it at the rated 800mhz (pc6400), though.
So for a 1520FSB setting (=380), it sets the memory to 760 in both the Linked setting and the Manual setting. Sounds like something in the bios, but I have tried the 1.0, 1.1, and 1.22b bioses with the same result!
Unfortunately, I recorded my OC settings but not the output on my first numerous attempts. But I want to say that originally, when I started the OC's, when I set the memory to Manual it ended up being Linked. And vice versa. So that at 1400FSB (350) --Linked, it gave me the 800 Memory setting and at 1400 (350) --Manual, it gave me 700 on the memory. But I'm not positive now (about a hundred OC settings later --and yes now I've been writing it down) that it ever worked right.
Any help or thoughts? Anyone else with this problem? Any fixes?

Quote from: Maesus on 02-May-07, 22:57:14
MSI BIOS is not flexible in overclocking or changing DDR RAM Timing settings. Please live with it and trial and error with the RAM timing setting that yields the best result.
I'm just supposed to accept the fact that you cannot set the ram to a manual timing, that it will always run as linked..... then why have the option to select it in the bios if it's not going to be functional. That's just unacceptable! live with it......right ! That's shoddy at best.!
Didn't have this problem with any Asus board (which has been several) or Abit board that I've owned!
And why is noone reporting this same behavior from their board and bios in this forum or over in hardforum or in the anandtech threads????

[AA7+] [Windows] Set default text size for "auto" setting...

Good morning:
I was wondering if it is possible to set the default font size or specify a maximum font size
for the auto setting of the font size on a text field when using the auto setting?
Currently, if the font size is set to "auto" it defaults to 12 pt. text if multiline is checked on the Options tab.
If multiline is not checked on the Options tab, the font size will adjust to the height of the box.
I would like to have the multiline checked, specify "auto" for the font size, but have the auto font size be no larger than 8 pts.
It can go smaller than 8 pts. if there is too much text in the field, but should not be larger than 8 pts. because the other form fields are in 8 pt.
If someone has any suggestions on how to achieve this, I would be most appreciative.
Thanks!
Theresa

Thanks Jongware!
I'm aware of the many different forums and I thought I was posting it in the Acrobat Scripting forum.
That'll teach me to look where I post. I guess I'm the one that needs the glasses.
Take care!
Theresa

How do you add a video on i-pod after you set it to manual

How do you add a video on i-pod after you set it to manual and not erase a ton of stuff in the process?
Thanks

after choosing the manually manage your songs you will not be able to add videos by clicking "update". all you going to do.. after converting videos compatible to ipod video, click your ipod on the left portion of the i tunes it will immediately show your songs from your ipod then drag the selected video from its folder to your i tunes just like adding songs to your ipod

Can I set the Fan manually..?

I use BOINC and because of that my Thinkpad T410 crashes quite often!
(Although I let BOINC only use one core!) Can I somehow set the fan manually to the maximum and set it back to normal when I stop BOINC?

@mBurch,
Just a suggestion ... since you leave the BOINC on when the laptop is idle, do elevate the laptop since the software is constantly running the proc up. By elevating the laptop you enable more air to get "pulled" into the base of the laptop thus better ventilation = cooler and happier laptop when you volunteer.
Juz my 2 cents =)
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

How to auto set one numeric test step's limits?

i want to auto set a numeric test step's limits ,the limit's value is got from one number control and one offset control in LV front panel of my programm.when i change the number control in my fronet panel of LV, and it will auto set the limits to my step in teststand.How to realize it? Using local variable or...?? pls help me and give me a example source code.thanks

Hi,
You should use the SetValNumber VI off of the TestStand Palette on your Controls Palette. The property you are trying to set is for the step and is identifed by the lookup string(s):
"Step.Limits.High", and "Step.Limits.Low"
Have a look at the examples inside of \Examples\AccessingPropertiesAndVariables\UsingLabVIEW\AccessingPropertiesAndVariables.seq.
Bob

WRE54G v3 - I manage to set it up manually but it crashes when I add security

I have attempted to set up the WRE54G via the cd but kept getting the "can not associate AP in repeater mode". I googled it and tried all the solutions suggested with no joy. It doesn't want to use the cd, I did it time after time changing things and nothing worked.
So I decided to set it up manually. I used this link http://www.tomsguide.com/us/how-to,review-308.html to help me. It worked up to stage 9, when I attempted to set up WPA security like my router has. Once I set up the WPA security, I pressed ok on the window that popped up, and everything crashed. The window went to "can not find this page" - I had no confirmation that it had worked. I checked the wireless networks and no security came up on the network for the expander. Also the link LED stayed red on the actual wre54g.
I am a bit of a novice at this kind of thing, but I managed it before with my linksys router, but now I've had to change it nothing works! It is causing me a lot of stress.
My router is 192.168.0.1, its a sky sagem wireless router f@st 2420.
I changed my WAN to 192.168.1.239 in order to see my expander. I then changed my expander to 192.168.0.40 so that my router and computers and expander can talk to each other!!
Please help.
Thanks for looking.

You could have followed that too closely. If your router is 192.168.0.1, you should make the RE 192.168.0.240 (not 192.168.1.240 like in the instructions). You don't need to change the WAN to XXX.XXX.1.XXX.
Edit: OK, I read a little closer and RE IP addy should be OK. Doesn't have to be 240 but make sure it is unique. Also, since you have been changing your router settings, please try a power cycle of the whole network. Bring the router up first, wait for lights to stabilize, RE next, wait for steady blue link and flashing activity, then clients.
Message Edited by Luckydog on 07-05-2008 08:48 AM
Message Edited by Luckydog on 07-05-2008 09:08 AM
Message Edited by Luckydog on 07-05-2008 09:11 AM

IPhone auto-set time is 1 min slow to time-server time.

I have the problem that my iPhone is 1 min slow... always (when auto-set by network). I live in the Portland Oregon area, and I do not believe the issue is with AT&Ts towers putting out the wrong time. As my co-workers with the 3G iPhone display the correct time. Why is this?

chrisrcarlson wrote:
I do not believe the issue is with AT&Ts towers putting out the wrong time. As my co-workers with the 3G iPhone display the correct time.
Still quite likely on AT&T's end. The time data is transmitted separately on the EDGE vs. the 3G networks. An iPhone 3G user in a recent thread described seeing different time/date on EDGE vs. 3G (toggling the 3G access on and off).
http://discussions.apple.com/thread.jspa?threadID=1984418

IMac auto-sets to medium brightness

I'm having this problem where every time I turn on the Mac, the screen is set at medium (7 I think) brightness. I don't know what could have caused this.
I remember before upgrading to 10.6.3 there was a problem where it would auto-set at maximum brightness unless setting it level 1 (2?) brightness. This seems like a similar situation but I haven't tested the "fix" this time 'round.
Any ideas?

iMac hardware forums:
http://discussions.apple.com/category.jspa?categoryID=189

WLC Channel Auto setting vs. Channel Manual

Similar Messages

Maybe you are looking for