WLC country code list

Guys,
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a.html#wp9005314
Cisco's Wireless LAN Compliance Status displays my country Mongolia as -E and says its compliant. So I'm assuming we need to purchase LAPs with -E as the regulatory domain, eg: AIR-CAP3502I-E-K9.
But on WLC, I'm not able to choose Mongolia as the country because it is not listed there. Does anyone know the full list of country codes that we can use on WLC? Is that list more than what WLC shows us or just same as the list on WLC?
If I'm not able to choose Mongolia as the country, selecting another country with -E domain will make my LAPs work?
Any comment is appreciated.
Thanks,Delgee

With the -E there are many profiles that can be selected, as most tend to be very close to the same restrictions.
However I would contact your local regulatory domain group and ask them which country is the same as Mongolia. Explain what you are doing and have them tell you, and get it in writing. that way you are covered on your choice.
Steve
Sent from Cisco Technical Support iPad App

Similar Messages

How can I use iCloud-keychain if i can not find my country in the country code list?

How can I use iCloud-keychain if i can not find my country in the country code list?

Welcome to the Apple Community.
If your country code does not appear in the list…
Go to System Preferences > iCloud > Keychain and enter your Apple ID password (Settings > iCloud > Keychain, from a mobile device)
Select the ‘Create Different Code’ option. (Mobile devices only)
Select the advanced option and choose whether to create a random code or no code, selecting the later allows syncing across devices but not with Apple’s servers.

Listing of Blocked Vendor by Country Code

Hi
I would like to know if there is any way for me to list all the vendors who are blocked ( purch block,central block & deletion flag) by country code.
Thank you
Regards
Pubalan

Hi
There is always a opiton to get the SAP result into a spreadsheet, just try to right click the page where you have got the result and enter dowload it will ask you the option of saving in differnet format.
regards
Yogesh

WLC 5508 multiple country codes, limitations

Hi CSC,
Currently we are running 2x 5508 (7.2.111.3) in our Regional DC and all AP's from APAC are connected in H-REAP mode.
On each WLC the following country codes are configured:
Configured Country Code(s):
CN, ID, IN, J2, J3, J4, JP, KE, KR, PH, PH2, TH, TW
Regulatory Domain:
802.11a: -ACEJKNPTU
802.11bg: -ACEJP
We have some sites (mainly China), which facing issues on WLAN recently (slow performance, weak signal..etc.
RF & power level are 'managed' by WLC.
After reviewieing some sites with our vendor, the feedback to improve stability/perfromace, was to either run just 1 country code/WLC..or set RF/power level manually for each AP. (which of course would be an admin nightmare!!)
I havent found the same information on cisco.com & thought connecting AP's from different country's to the same WLC works well (incl. having the WLC manage power/rf)?
Are there any limitations, when having multiple country codes on same WLC?
Appreciate your feedback.
Thanks,
Stefan

As far as I remember, every AP with a different country code have different permissible level of power and a regulatory authority board monitors these. So in case you wanna mix the AP with different codes, it will choose the ones with lower power level and operate which might not be to your advantage since the users might want to operate at higher power level. So, you can find out the permissible level of Transmission power and group AP with same level together and get another WLC. Also, run a site survey to check for interference. Might help
Posted by WebUser Shalini Menon from Cisco Support Community App

Wlc 5508 multiple country codes + mesh ap

Hello,
Currently my solution consist of two 5508 controllers and several non-mesh and few mesh AP (2600) running in flexconnect mode in one single site in europe.
Everything is going fine.
However there is going to be a new site in Canada.
I found some documentation saying that multiple country code is not available for mesh ap. Mesh ap are not going to join controller if multiple country code configured . but all this documentation is regarding version 7.2 and older.
Im running version 7.4.100.0 and on configuration guide I don't find anything related to that.
Am I going to have problems with this as well?
If yes, what is the recommendation solution for this situation?
Thanks in advance,
Chris

They do support multiple country code, but with regulations, the WLC will use the common channels and power for each of the countries you have defined. Now this will never change so its still best to have separate WLC per country if possible. Especially with mesh since the backhaul is on the 5ghz, this is really your limitation is you have AP's in a country where there is no allowed 5ghz or a minimum number of allowed channels.
Sent from Cisco Technical Support iPhone App

Change the default country code for new contacts in Outlook 2013 for countries not listed in Control Panel Region Format

Dear all,
I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
I am using Windows 8.1
I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
Format List.
Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
Kind regards,
Osvaldo

Hi,
Windows uses the information set under
'Phone and Modem' in the Control Panel to determine the default area code.
You can change the country/region to
Mozambique
and set your area code here:
Regards,
Steve Fan
TechNet Community Support

WLC 2125 - Country code selection

WLC Mode: AIR-WLC2125-K9
Version: 7.0.116.0
Here is the scenario, we have two WLC, one is located at SG and the other is located at MY (In test stage).
Both WLC has configured with three Country Codes CN,MY and SG , as well as the Regulatory Domain 802.11a -CS and 802.11bg -ACE).
Yesterday we did perform WLC failover test and it was successful but we noticed some of the APs country code are incorrect set as before, we are tried into the AP config, and pull up the Advanced Tab and select the Country where the AP is physically located but the weird issue happened whereby there are only one country code available and the other two country code are missing.
Here is the AP model we used.
AIR-LAP1142N-N-K9 (CN)
AIR-LAP1242AG-S-K9 (SG and MY)
Could someone help to advise what would be the cause how to resolve this issue.
Thanks in advanced.

With the -E there are many profiles that can be selected, as most tend to be very close to the same restrictions.
However I would contact your local regulatory domain group and ask them which country is the same as Mongolia. Explain what you are doing and have them tell you, and get it in writing. that way you are covered on your choice.
Steve
Sent from Cisco Technical Support iPad App

Country Codes - WLC

Hello,
When selecting country codes on a WLC - what exactly is this doing in the background? Does it prevent certain APs from being able to connect to the WLC. Are certain standards disabled etc..? I know it's just a tick box, but really want to understand what happens in the background.
Thanks

Hi GRANT,
Normally country code specify a particular country of operation (such as DE for Germany or US for America). Each country code ensures that each radio’s broadcast frequency bands, interfaces, channels, and transmit power levels are compliant with country-specific regulations.
Regards
Dont forget to rate helpful posts

Can Local Mode Cisco Mesh APs (1522/1552) be supported in a Multiple country code 5508 WLC?

I've read previous discussions (i.e., "wlc 5508 multiple country codes + mesh ap") on this forum that stated Mesh APs can't be supported on a WLC set-up with more than one country code configured. If you have Outdoor APs which are set-up for local mode only, and not used in a Mesh wireless architecture (using Mesh Beacons), will this apply as well? I don't know if there are any caveats to this. Or if Cisco 1522/1552 APs can't be supported on a WLC using more than one country code period, regardless for how they are used, since they are considered Mesh APs. Another question, can a WLC support two regions (Region E and Region A), in a two country code assignment? I've read on the forum the downfalls for using more than one country code on a WLC, so understand that it will use the lowest common denominator settings (i.e., power, channels) for operation, so this isn't ideal.
I want to stick to one controller using one country code only. This isn't something I want to do, but we had an issue with an order being processed for APs, which resulted in the wrong region APs being delivered by a vendor, and leadership is exploring alternative options. So, the above is worst case scenario planning if we can't swap the APs back for some legal reason, or if it takes too long to accomplish. We could always purchase a smaller WLC with a license size to support only the different region APs purchased if it comes to it.

Hi,
As per my experience, Normal APs(Local Mode) can work with multiple Country Code .
WLC can support multiple country code but it's a bad idea to have it. Only common channel, power will allowed.
Best is to buy a 2504WLC and use it.
Regards
Dont forget to rate helpful posts

How can I call contacts from my list without the country code that is registered with that contact?

I have all my contacts registered with a country code. When I want to make calls from my iphone, I do not want the phone to dial the country code, but only the area code. How can I make that happen?

Your 3G backup contains your contacts already, you don't need to sync them to Outlook or anything just restore the backup file from the 3G onto the 4S and you should be good to go.
This kb article should help:
http://support.apple.com/kb/ht1414

How can I make local calls without using a country code when it's in my Contacts?

The phone numbers in my Contacts all contain country codes because I do a lot of travelling.
An example of this might be:
+1 (229) 123-4567
+44 (0)12 345 6789
+31 (0)10 2345 6789
I have an unlocked phone so when I travel, I usually pick up a local SIM and use that to make calls.
The problem I have is that when I am abroad and select a phone number from my contact list it doesn' work. For example, if I select a contact with the number:
+31 (0)10 2345 6789
A voice-recording comes on saying that the number I had dialed was incorrect.
But when I dial the number manually:
010 2345 6789
It works.
In the US I do not have this problem because for some reason, the phone knows whether the +1 is needed or not. I'm sure if it uses it at all when you're in the US. When I dial internationally from within the US, the number dialing works fine.
So this problem only occurs when I'm dialing locally in the country I'm in while travelling outside the US.
Anyone have any idea of why this is happening and more importantly, what I need to do to fix this? I would hate to have go and change all my contact numbers and get rid of the country codes. If I ever have to call those numbers internationally, I'll need to manually add the country code back in.
Very annoying!
Advice anyone?

If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789

How do I add the country code to all contacts when it did not previously appear?

I just moved from the US to the UK and purchased a new iPhone 4S. When my contacts migrated from Outlook to the iPhone they did not include the country code in the US and therefore all contacts numbers are now listed incorrectly. How can I add the country code to hundreds of contacts painlessly?
Thanks in advance.

International Assist is activated. Upon further review this appears to be a case of the original country codes not being added when the contact list was constructed. iOS has not figured this out and thus when changing countries I've been forced to add the country codes to every contact record manually. Disappointing and very labour intensive. If only Apple allowed for a macro that simplified the mass change.

Supplier Conversion - Sites data - Country code

Hi,
While doing Supplier conversion from release 11.5.10 to R12.1.3, we see the below value in REJECT_LOOKUP_CODE column of the AP.AP_SUPPLIER_INT_REJECTIONS table:
'AP_NULL_COUNTRY_NAME'
As I understand this looks like the program is looking for a Country code. The country code column is a Nullable column in the AP_SUPPLIER_SITES_INT table, so not sure where validation happening. In 11i data, there are records that do not have the Country code set up and we are tying to bring those in to R12. Any one faced this issue, any ideas / work-around?
Is the program validating the data against any seeded lookups in oracle apps?
Thanks,
gg.

Hi Vidhu,
Every supplier will have a site meant for different purposes ... at the backend they are stored in AP_SUPPLIER_SITES_ALL table ...
If you query this table, you can find the list of supplier sites that are enabled for Purchase Site assignment and Payment Sites assignment ....
i.e.
Select VENDOR_ID, VENDOR_SITE_ID, ORG_ID, PURCHASING_SITE_FLAG, PAY_SITE_FLAG from AP_SUPPLIER_SITES_ALL
From Vendor ID you can find the supplier name and number from AP_SUPPLIERS table
From Vendor Site ID you can find the supplier site name from AP_SUPPLIER_SITES_ALL table
From ORG_ID you can find the operating unit name from HR_OPERATING_UNITS
I would recommend enabling the Pay_site_flag for the supplier sites that are enabled for Purchase site flag and assigned to operating unit already .....
Since you cannot create Invoice for a supplier site, if the site is not enabled for Pay_Site_flag, and you cannot create purchase order for a supplier site, if the site is not enabled for Purchasing_site_flag... hence from business perspective they need a site in every operating unit which is enabled for Pay_site_flag and Purchasing_site_flag ...
Regards,
Ivruksha

Numbers with US country code (+1) are not recognized

Hi Everyone,
some of my contacts have +1 (US country code) stored in front
of their number, as that is the only way to ensure texts reach
them, while one is abroad.
In the US, though, when they call their numbers are not always
mapped to the contact by the iPhone. The incoming number is without
the +1 prefix which I guess confuses the phone.
I was wondering if other people were experiencing this and if there
is a fix for it?
Hopefully this will also reach Apple, so they can take a look at it.
Thanks for looking,
jazzy79

jazzy79 wrote:
I was wondering if other people were experiencing this and if there
is a fix for it?
Store BOTH numbers in your contact list...one with the +1, and one without. If you hit the edit button for a contact, a new field will pop up for phone numbers, add new number. You can add a custom label as well by clicking on the chevron in the "new" number field.

Re: Skype To Go - Bonaire country code now no long...

I have a similar problem for the island of Bonaire, skype to go now says this country is not rcognized. Country code 599 and bonaire does not show up anymore on the country lists.
Post transferred to create its own new thread; subject/title edited accordingly.

Hello and thanks for reporting this issue. A report has been sent to the relevant Skype unit
Note to me: ESTG-4
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

WLC country code list

Similar Messages

Maybe you are looking for