WLC CT2504: Interface IP can not be used as internal DHCP server IP

Hello all,
I've got a new CT2504 controller with software version 7.0.220.0
Regarding to
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080af5d13.shtml
I've tried to configure the internal DHCP on a dynamic-interface, but this is not possible:
(Cisco Controller) >config interface dhcp dynamic-interface vlan401 primary 172.16.x.3
vlan401 Interface IP can not be used as internal DHCP server IP
It works, if I use another IP (aka DHCP server) in the same subnet or in another subnet. It works also for the management interface.
(Cisco Controller) >show interface detailed management
Interface Name................................... management
MAC Address...................................... d0:c2:82:xx:xx:xx
IP Address....................................... 10.2.x.135
IP Netmask....................................... 255.255.255.240
IP Gateway....................................... 10.2.x.129
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. 400
Quarantine-vlan.................................. 0
Active Physical Port............................. 1
Primary Physical Port............................ 1
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 10.2.x.135
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. No
L2 Multicast..................................... Disabled
Scopes are defined and Proxy is enabled.
(Cisco Controller) >show dhcp summary
Scope Name                   Enabled          Address Range
ap                               Yes      10.2.x.137 -> 10.2.x.140
intern                            Yes      172.16.x.20 -> 172.16.x.30
(Cisco Controller) >show dhcp proxy
DHCP Proxy Behaviour: enabled
Has somebody an explanation for this issue?
Thanks in advance,
Regard,
Robert

You can use the internal dhcp, but you need to set the primary dhcp as the management ip. So in your dynamic interface, your primary dhcp is configure with the wlc management ip address. Dhcp proxy also needs to be enabled and is enabled by default.
Thanks,
Scott Fella
Sent from my iPhone

Similar Messages

Configuring the 3750G WLC to use the Internal DHCP Server

I want to use the Internal DHCP Server on a 3750G WLC to hand out IP's to gueat users. I'm having issues getting the DHCP server to hand out addresses for the guest network - any suggestions would be a great help.
Configuration Details are attached.

Configuring DHCP
http://www.cisco.com/en/US/docs/wireless/controller/5.2/configuration/guide/c52wlan.html#wp1293808

5500 Series WLC internal DHCP Server - Exclusion?

Hi there,
We're using the internal DHCP server on our 5500 Series WLC which works fine.
However on one WLAN we ran out of addresses so changed the subnet from a /25 to a /24.
The problem is that the router/gateway is still in the middle (124/125/126) and not easily changed.
I've moved the WLC interface to the top of the subnet (251) but the router is more difficult as its externally managed/controlled.
So is there a way we can create a DHCP pool of .1 through 250 on a /24 mask but exclude 124/125/126?
Thanks
Mike
PS - Router subnet masks were changed so can see whole subnet.

Mike,
The WLC isn't a fully functional DHCP server, it only allows you to define what is in scope, not what is out of scope. Now if you have a cisco router/switch, you could use that for the DHCP server and specifically exclude the necessary addresses.
HTH,
Steve

Cant open PDF files..It says the adobe acrobat reader that is running can not be used to view files in a browser..plz suggest the solution.thanks

Whenever i try to open a PDF file it says " The adobe/acrobar reader that is running can not be used to view files in a web browser. Plz exit adobe/acrobat readerand exit your web browser and try again." Wt do i need to do, plz suggest.
Regards
Aditya Bhargava

Hi adityabhargava01-
My first suggestion is to upgrade to the most recent version of Firefox by going to this link:
http://www.mozilla.org/en-US/firefox/new/
My second suggestion is to read this article on how to many your preferences on how Firefox deals with PDFs and all other file types:
[[Options window - Applications panel]]
I hope that helps!

AdobeAcrobat/Reader that is running can not be used to view PDF Files in Web Browser...what do I need to do to fix this..

I just got Windows 7 and have been having problems since loading it. Most of my drivers only go to Vista and don't recognize 7.
I have trying to download some manuals from their website
and keep getting this message; Adobe Acrobat/reader that is running can not be used to view PDF files in Web Browser.

Could I suggest a workaround for PDFs until a solution is posted? Open them directly in the Adobe application rather than in a browser tab.
In your Adobe application(s), go to:
Edit > Preferences > Internet
Then uncheck "Display PDF in browser"
(There are very few sites where having PDF integrated is really beneficial.)

Chrome - Adobe-Acrobat/Reader can not be used to view PDF files in a web browser.

I can't view PDF files via Chrome (it works on Internet Explorer but I prefer Chrome) - the error below has arisen recently on Chrome, though I can't see what has changed.
"Acrobat plug-in
The Adobe-Acrobat/Reader that is running can not be used to view PDF files in a web browser. Please exit Adobe Acrobat/Reader and exit your Web Browser and try again."
I have looked through Forum articles on similar errors and have tried the following(text copied from other Forum entries)
Repair Adobe Acrobat (from Acrobat)
Repair Adobe Acrobat (from Control Panel
Configure Acrobat as a helper application: Choose Edit > Preferences., Select Internet on the left., Deselect Display PDF In Browser Using [Acrobat application], and then click OK.Quit Acrobat or Reader
Create a registry item for Acrobat: with Regedit: If the registry item doesn't exist on the system, do the following: Go to Edit > New > Key and create the missing HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe.Go to Edit > New > String Value and name this key (Default).Select (Default), and then go to Edit > Modify. Type the Adobe Acrobat path in the "Value data" for your product.,restart your computer
Repair the HKCR\AcroExch.Document registry key: Navigate to HKEY_CLASSES_ROOT\AcroExch.Document., Right-click AcroExch.Document and select Delete; make sure that you have the correct key, and click Yes on any prompts, Right-click AcroExch.Document.7 and select Delete; make sure that you have the correct key, and click Yes on any prompts. Repair your Acrobat installation
None has solved the problem. However it still works ok with IE. But I want to stick with Chrome because I find IE is so slow!
I am using Vista, with Adobe Acrobat standard 9.5.2 and Google Chrome version 23.0.1271.64 m which is marked on Chrome as 'up to date'
Does anyone know why I might be getting this error on Chrome but not IE?

I think I have discovered the answer to my own question!
I have disabled Adobe Reader plug-in, and can now see PDFs in Chrome.
(Steps: Chrome Menu, Settings option, Click Advanced Settings link, then Content Settings button, then select Disable Individual Plug-Ins, and a list of plug-ins is offered to enable or disable).
I then get a different result depending on whether or not Chrome PDF viewer is enabled - with it enabled I see the PDF document in Chrome, or with it disabled then the option is offered to download it, but either way I can get it it via Chrome without having to run Internet explorer in another browser window.

Reader 9.2 - "can not be used to view PDF files in a web browser"

Hello,
I recently deployed Adobe 9.2 within our organization. I used the Adobe Customization Wizard 9 to transform the install set, and selected the "Display PDF in Browser" option as default.
When opening a PDF linked from a web URL, we get the message: "The Adobe Acrobat/Reader that is running can not be used to view PDF files in a Web Browser. Adobe Acrobat/Reader version 8 or 9 is required. Please exit and try again." This occurs under IE8 and IE6, in both Windows XP SP2 and Windows 7.
If I launch Adobe Reader and unselect "Display PDF in Browser" in preferences, PDFs open normally.

I think I have discovered the answer to my own question!
I have disabled Adobe Reader plug-in, and can now see PDFs in Chrome.
(Steps: Chrome Menu, Settings option, Click Advanced Settings link, then Content Settings button, then select Disable Individual Plug-Ins, and a list of plug-ins is offered to enable or disable).
I then get a different result depending on whether or not Chrome PDF viewer is enabled - with it enabled I see the PDF document in Chrome, or with it disabled then the option is offered to download it, but either way I can get it it via Chrome without having to run Internet explorer in another browser window.

Adobe Acrobat/Reader can not be used to view PDF's in Web browser.

Does any one came accross the following message trying to view PDF's in web browser? "Adobe Acrobat/Reader that is running can not be used to view PDF documents in Web browser. Please exit the Acrobat?Reader application and try again". Thanks for your help! Barbara

http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

A function can not be used in Applet.what's wrong?

Here is a function.
private String LoadFile() {
String input;
String output="sssssdsdsddf";
try{
FileReader f=new FileReader("shu.txt");
BufferedReader in = new BufferedReader(f);
while ((input = in.readLine())!= null){output=output+input;}
in.close();
}catch(IOException e) {
System.err.println("Exception caught: " + e.getMessage());
return output;
It can be used in Java Application,and work well.but can not be used in Applet,it does not work.what's wrong?

http://www.javaworld.com/javaworld/jw-12-2000/jw-1215-security.html#sidebar1

A function can not be used in Applet.what' wrong?

Here is a function.
          private String LoadFile() {
String input;
          String output="sssssdsdsddf";
          try{
          FileReader f=new FileReader("shu.txt");
BufferedReader in = new BufferedReader(f);
while ((input = in.readLine())!= null){output=output+input;}
          in.close();
          }catch(IOException e) {
               System.err.println("Exception caught: " + e.getMessage());
return output;
It can be used in Java Application,and work well.but can not be used in Applet,it does not work.what's wrong?

Don't you think it would be a bit of a security risk if any applet you downloaded from the web (unknowingly) could read/write to your file system....
Applets have strict security applied to them, and file i/o is one of the restrictions. There are ways around it, but for the moment I'd suggest you build a bridge and get over it.
Cheers,
Radish21

Adobe 9.1.3 and FireFox 3.5.1+ "...can not be used to view PDF files in a Web Browser"

This is the issue but I'm not sure there is a resolution:
Firefox: Version 3.5.1
Adobe: Version 9.1.3
When navigating the web, click a URL that opens a PDF inside the browser and you get an error * "The Adobe Acrobat/Reader that is
running can not be used to view PDF files in a Web Browser". Please exit Adobe Acrobat/Reader and exit your Web Browser and try again". I did read a post that doing a "repair" from the Adobe Reader application should fix this, they also reference a few registry keys to check becuase the post states it's lost the application path to Adobe version X. I don't necessarily buy that "fix" and here are my details below.
In FireFox if you navigate to Tools > Options > Applications > Adobe Acrobat Document
You're given choices:
Always ask: DOES NOT WORK, produces afore mentioned error *
Save File: Works, saves the file to a directory on your PC
Use Adobe Reader 9.1 (defau...: Works, opens your PDF's outside of your web browser
Use Adobe Acrobat (in Firefox): DOES NOT WORK, produces afore mentioned error *
Use other...:
IE seems to just work as expected.
If you open Adobe Reader > Edit > Preferences > Internet > Check "Display PDF in browser" - DOES NOT WORK, produces afore mentioned error *
This would seem to be an Adobe error rather than a FireFox web browser problems since FireFox does seem to know the correct path although I suppose you can't rule out that this is a FireFox problem since 2 out of the 4 PDF open options DON'T WORK.
Any thoughts on this issue would be greatly appreciated.
Other information:
Adobe 8.1.5 works perfectly with FF 3.5.1+ when opening PDF's in the web browser, we also had no problems with previous versions either.
MSI push via Active Directory from Adobe 8.1.5 upgrade to Licensed Distribution I signed up for, Adobe 9.1.3 which was upgraded from 9.1.0, to 9.1.2, to 9.1.3 via an MSP patch.
Operating system: Windows XP SP 2, plenty of RAM, plenty of Drive
IE version this works with the new version of Adobe 9.1.3 is version 7 (7.0.5730.13)
Our FireFox MSI's come from Front Motions website and as far as I know we've never had problems with their MSI's, also tried the new release of FF 3.5.2 from their website.
I think that about covers it. Anyone else experiencing the same problems or have a patch?

After troublshooting this for the entire day today the issue seems to be a MIME problem.
If everything is woking perfectly, in Tools > Options > Applications...
You should see 4 or more things related to Adobe like "Adobe Acrobat Forms Document", etc. If you don't see at least 4 MIME entries either your Adobe installation is hosed or your FF installation is hosed. I haven't figured out which is causing the issue.
What I did was remaster my patches from my original Adobe 9.1.0 MSI with the two updates via the command line in the directories with the source files. On the 9.1.0 original file I first remastered my MST transform with the Adobe MST utility. I then applied my patches.
msiexec /a AcroRead.msi /p AdbeRdrUpd912_all_incr.msp
msiexec /a AcroRead.msi /p AdbeRdrUpd913_all_incr.msp
I then uploaded that to my network share, unlinked my group policy, made a new group policy, added a batch file to delete adobe.com from program file and the desktop on system startup even though my MST was supposed to take care of that - it's not a perfect world is it? :-)
I then reapplied my GPO's for both FireFox 3.5.2 and Adobe 9.1.3, I checked to make sure the MIME extensions were there and they were. You might have to go into your Adobe Preferences and select that open in browser setting depending on what happens or adjust your MIME settings in FireFox's options but it should work.
That's what worked for me. It's possible a few other things I did along the way tweaked it out, in my group policy on the first run I did select to upgrade previous group policies, for the remaster and repush I didn't select any previous GPO's to upgrade.
It's hard to tell what one thing tweaked it out or what combination of things tweaked out the install. I did also reinstall Adobe 8.1.5 and FF 3.0.10 before doing all this since our machines currently have that setup, I'm not sure if that affected it either, it's just hard to tell but I don't think it did simply because I had done that several times in troubleshooting this issue.
If anyone else has more specifics that would be great!

This phone can not be used because the apple mobile device service is not started

i plug my iphone into my computer and the message this phone can not be used because the apple mobile device service is not started pops up and wont let me download any music onto my phone. what can i do to make that stop happening?

See Here
http://support.apple.com/kb/TS1567

This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes

This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!

Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Please help i am going off my mind when i connect my iphone 4 to my mac it tells me it can not be used because it requires 10.6.3 or later my mac is operating on 10.6.8 and my itunes is 10 .5 yet the iphone does not even show up in devices please help

please help i am going off my mind since i updated my iphone 4 when i go to sync it tells me it can not be used as it requires 10.6.3 or higher
my mac is running on 10.6.8 and i upgraded my itunes to 10.5 everything seems to be in place but the phone is not even being recognised in
devices although it does come up in iphoto if anybody can help i would be very grateful.

You have answered your own question:
"requires 10.6.3 or higher"
" i upgraded my itunes to 10.5 "
You need itunes 10.6.3 or later.

Hello i can not i use my account on the applewill store , i hope that yu help me with a lot of thanks and wait reply to this massege

hello i can not i use my account on the apple store , i hope that yu will help me with a lot of thanks and wait reply to this message

Go through the below link.
http://support.apple.com/kb/ts2446
If the above link doesn't helps then contact APple support and they will help you Enable your Apple Id from their End : http://support.apple.com/kb/he57

WLC CT2504: Interface IP can not be used as internal DHCP server IP

Similar Messages

Maybe you are looking for