WLC displays different IP for LAP in GUI

Hi,
I have the following issue with one controller AIR-WLC2112-K9 with 2 LAP .When I ask the info by GUI for the the LAPs in Wireless ----> AP name (click) ---->General the info displayed in "IP config" does not match, for the field static IP is shown the IP 172.18.98.2 but the line above "IP address" shows 156.70.30.5. Controller has IP 156.70.30.3
I verified by console with the command show lwapp ip config and the IP is correct. 172.18.98.2.
any idea?

hi leolaohoo ,
thanks a lot for your info.
version is 5.2.193.0 , is a new one controller....but ver is older than yours.
do you have the cisco's link for this issue??
regards

Similar Messages

How to display different icon, for different node of jtree

Hi All,
How to display different icon, for different node of jtree

you haven't responded to my last post here: [http://forums.sun.com/thread.jspa?threadID=5323190&messageID=10382676#10382676|http://forums.sun.com/thread.jspa?threadID=5323190&messageID=10382676#10382676]

How do i display different tooltip for different parts of an image

I have a .jpg image that i would like to display different tooltips for depending in where the mouse pointer is in the image.
Any help is appreciated.

I edited the button template in the app.xaml so all my buttons have transparent properties for all the trigger properties and the setter properties since in this instance i have no other use for the button.
<Application x:Class="Application"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
StartupUri="MainWindow.xaml">
<Application.Resources>
<Style TargetType="{x:Type Button}">
<Setter Property="FocusVisualStyle">
<Setter.Value>
<Style>
<Setter Property="Control.Template">
<Setter.Value>
<ControlTemplate>
<Rectangle Margin="2" SnapsToDevicePixels="True" Stroke="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}" StrokeThickness="1" StrokeDashArray="1 2"/>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Setter.Value>
</Setter>
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="Transparent"/>
<Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
<Setter Property="BorderThickness" Value="1"/>
<Setter Property="HorizontalContentAlignment" Value="Center"/>
<Setter Property="VerticalContentAlignment" Value="Center"/>
<Setter Property="Padding" Value="1"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type Button}">
<Border x:Name="border" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" SnapsToDevicePixels="True">
<ContentPresenter x:Name="contentPresenter" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" ContentStringFormat="{TemplateBinding ContentStringFormat}" Focusable="False" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" Margin="{TemplateBinding Padding}" RecognizesAccessKey="True" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" VerticalAlignment="{TemplateBinding VerticalContentAlignment}"/>
</Border>
<ControlTemplate.Triggers>
<Trigger Property="IsDefaulted" Value="True">
<Setter Property="BorderBrush" TargetName="border" Value="{DynamicResource {x:Static SystemColors.HighlightBrushKey}}"/>
</Trigger>
<Trigger Property="IsMouseOver" Value="True">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
</Trigger>
<Trigger Property="IsPressed" Value="True">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
</Trigger>
<Trigger Property="ToggleButton.IsChecked" Value="True">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
</Trigger>
<Trigger Property="IsEnabled" Value="False">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
<Setter Property="TextElement.Foreground" TargetName="contentPresenter" Value="#FF838383"/>
</Trigger>
</ControlTemplate.Triggers>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Application.Resources>
</Application>

Need to display different colors for Actuals and forecasting values in WAD

Hi Gurus,
My requirement in the report is, I need to display different colors for particular values like Actuals(say value type 10) and for forecasting values(say value type 20) , and data will uploaded from flat file.
Scenario : If I upload the data for March Month, I receive actual values upto March(Jan to March month) and from April to Dec(Forecast values with value type 20), Every month I will be getting file and similarly for subsequent months, i will get current month actual values and forwarding months forecasting values,
Now , my requirement is, When ever i execute the Report, Say if i execute for April Month, Upto April( Jan to April for actual values should be displayed in one color) and from May to Dec ( forecast values should be displayed in different color).
I had tried with following options like exceptions and could not display , as it runs based on key figure values where as my requiremnet is based on the CALMONTH , i need to show different colors for both actual and forecast values.
Kindly, help me out from this,
Thanks

Hi,
it is not necesseary that you need to do that in WAD , you can do the same in BEx platform, Since WAD is build above the bex reports. so automatially any changes done in Report will be replicated in WAD
Go for Exceptions in Bex. Give some range for Actuals and Forcasting at the creation of the exception.
if you do those changes in BEX automatically it will replicate in the WAD.
for more information please read this link
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
hope this will solve your problem.
Santosh

Display different level for same hierarchy value in BO 4.0

Hi Expert,
I have one question for Webi for BO 4.0
We have one hierarchy in BW side and we hope to display differet level in same report for different column
For example, column A is for level 6. column B is for level 7.
Do you know how to releaze this in Webi side?
In the 3.X version, we have different dimension for different level.
But now in BO 4, it has been combined into one\
Thanks and best regards
Alex yang

Hi,
You can still do this in BI 4.0, if you use the old 'legacy' MDX OLAP.unv from Universe Designer tool .
Yes, with the BICS connection, you are getting a native hierarchy, as it would be displayed in an OLAP environment.
Cheers,
H

ICals on OS X & iOS display different time for same event

I am in UTC+8 time zone. My boss is in UTC-5 time zone. I have set up sync service on my MBA and iPhone iCals with my company's MS Exchange Server.
I have a weekly meeting invitation from my boss, my MBA iCal displays this meeting on 10:30pm which is wrong, while my iPhone and MS Server displays 9:30pm which is corret - the meeting takes places on 9:30pm my time.
All my other iCal events are fine on both devices, only this weekly event displays different time. I have taken with MBA and iPhone to travel around the world over the past half year and switched time zones on them, but they are all set to adjust time zones automatically, and they are with most up-to-date system. Why does MBA iCal displays wrong time? Can I adjust it? This problem exisits on Lion and now also on M Lion.
Thanks for everyone's attention and help in advance!

Try using floating time zones. It helped for me.

OpenType Frutiger fonts in Photoshop displaying different weights for the same instance.

So,
Really weird bug I've noticed. Our client has provided us with Frutiger LT Std. type family and Photoshop. We are using the fonts for their designs, but instances of the same font look different. Let me explain...
If I apply Frutiger LT Std. 65 Bold to a headline at 20px, it looks fine. If I make a new layer and apply the same font treatment, it renders like a semi-bold (note: there is no semi-bold in our Frutiger font family); the difference is clearly visible. If I create a character style from the correctly displaying headline instance, and apply it to a new line of type (or an existing line of type), it displays incorrectly as a semi-bold font. If I duplicate a correctly displaying headline instance, the duplicate will do the same thing. However, if I drag/copy the correctly displaying headline instance, it displays correctly and looks fine. It's a small bug, but it's causing big inconsistencies in our design and taking a lot of time to fix.
I've tried deleting the fonts and re-installing them in Font Book. No luck.
I've tried deleting the fonts and re-installing them in Font Explorer. No luck.
I've tried deleting the fonts and re-installing them in Font Case. No luck.
In everyone of those instances, I've shut down Photoshop and restarted my computer.
If anyone has any feedback on why this is happening, or ideas for a solution it would be greatly appreciated.
Best,
Yeti

Hi Thanks for the reply..So are you saying like add the same "FullName" attribute twice with different Alias Names(Owner,Assignee) ?But here we are having the FullName as common and depends upon role we are displaying "Owner" or "Assignee".If i create two instances for same attribute will it not be like redundancy ?

How to display different text for labels in Group Above Report Oracle Repor

Hello,
Is there a way to change the text that is displayed in Labels in a Group Above Report? For example, I have a Group Above report with my columns of data and above the columns I have my column labels, but I would like to be able to display various text, i.e. different labels based on condition. In other words, Column1 label could say Column 1 or This is Column1, based on a condition. This is Oracle Report Builder 10.1.2.0.2.
Thank you.

968277 wrote:
I'm thinking it is possible with a Format Trigger, but I've only ever returned (TRUE) or (FALSE). I am very new to Oracle Reports Builder. Thanks.Hi,
Yes it's possible. and your are in the right place. use this true and false. For example
/*true means display, false means don't display */
if your_criteria_or_condition is ok then
return (TRUE);
else
return (FALSE);
end if;create as many label as your need and control with the code..
Hope this works..
Hamid
Mark correct/helpful to help others to get right answer(s).*

Displaying different colors for cells/columns in Interactive Report

Hi,
I have a requirement to display just the 'cells' in the Interactive Report columns with different colors.
There are 3 columns in the Interactive report.
The color coding for all the 3 different columns should be such that:
<40% - red color
40-70-orange
greater than 70%-green
I tried the highlight option in the report and saved the report as default, but still the color condition ended up getting displayed to the end user. I dont want this.
Can someone suggest a better way to handle this requirement?

Perhaps explore similar solutions described here
Background Colour of Report Cell Issues.
Scott

Can you use a single webhelp file to display different help for two apps?

I have updated a WebHelp project for a Windows app (let’s call it App1). Now the Dev team is creating a separately installed app (lets call it App2) that shares some of the same Help information as the original app. Both apps can be installed on the same system. The Help for App1 is accessed from an About menu in the app UI. Some of the topics are dialog boxes accessed from a question mark icon (?) at the bottom of the UI (I assume map IDs are involved in hooking up the dialog box Help - I need to verify this with Dev). The Help for App2 will be accessed from the App2 UI, which looks very similar to the App1 UI, except that certain features in App1 are missing from App2.
Here are the parameters:
In some cases, entire Help topics will apply to both apps.
In some cases, a portion of a topic for App1 will also apply to App2.
In some cases, a topic or topic portion for App 1 does not apply to App2 and vice versa
I’m using Robohelp 9 (RH9). Is there a way to allow App1 to display only the WebHelp that is relevant to that app and for App2 to display only the WebHelp that is relevant to that app? Is there a solution that would allow me to use one Help project and build only one Help file, with the result that App 1 displays only the Help it needs and App 2 displays only the Help it needs? Would conditionalizing the Help and providing two sets of WebHelp be the solution? Or is there some other alternative?

You could do it in a couple of ways – one way is to have 1 project & use conditions to generate 2 flavours of WebHelp output, one for each App; the other way would be to use one project and create DUCC flavoured WebHelp – that way the use would choose to read the appropriate flavour of help for their App.

How to display different message for More.. in jsp ?

Hi,
We have requirement where we have to display See All after say after 10 dimVals . I have enable dynamic refinement ranking and put value as 10 also I have checked the box for More..
I want to display See All instead of More.. in my application. Please let me know how can I achieve this.
Anup

I don't think you can - I usually just use some simple web application logic to check for "More..." and replace it with whatever should be displayed instead.
Michael

How to display different form_letters for 2 conditions?

Hi everyone.
I have a new question. I absolutely have no idea on how to do it.
I have prepared a report using form_letter & tabular style.
In the form_letter style report, there is a subject line to the letter.
This subject line should change for a condition.
In the tabular style report, there is a column named as 'TYPE' - [ Cumulative & Non-cumulative ]
There are two subject lines. [ (Subject-1) & (Subject-2) ]
I want to display "Subject -1" when TYPE - Cumulative .
I want to display "Subject -2" when TYPE - Non-Cumulative .
How do i do this?
I want to paste the image regarding this, but i am unable to paste because the 'Insert image' is disabled. How do i insert image?
Thank You.

Hi Vijetha,
Create a formula column named subject , data type is character and widh is 100(based on your subject length you can give).
pl/sql formula is:
function subjectformula return char is
begin
if :type='cumulative' then
return (:subject-1);
else
return (:subject-2);
end if;
end;
In the layout model create a field and call the formula column subject as source.
I think it is helpful to you.

Re: Displaying different symbols for numeric data

I'd think it would have something to do with your System.out stream using a different character set than the string you are trying to display. Should you perhaps set its charset before you try to output that string?

I found out how to do it in O'Reilly's Java Internationalization book (page 127).
You have to call DecimalFormatSymbols.setZeroDigit

ITunes to Display different language for foreign albums

My iTunes Changes display Thai song to unknow language
What should I do??

It's not another language, just the wrong encoding. You probably have to convert the id3 tags to unicode

How to display different icon within WDA alv table base on row data ?

Hi,
is that possible to display different icon for every row within ALV table depending on the row data ?
for instance if the status 'S' display ~Icon/SuccessMessage and 'E' display ~Icon/ErrorMessage ?
because base on this code below i only can set 1 icon for the whole row data.
LOOP AT lt_columns ASSIGNING <fs_column>.
    CASE <fs_column>-id.
      WHEN 'ICO'.
        CREATE OBJECT lr_caption.
           lr_caption->set_image_source( value = '~Icon/SuccessMessage').
           <fs_column>-r_column->set_cell_editor( lr_caption ).
    ENDCASE.
ENDLOOP.
Thank you in advance.
Fernand

Hello,
Yes it is possible to display different images based on data.
For that what you can do is create one attribute 'STATUS' of type string in context node which you are mapping to ALV.
And fill that attribute with the path to image based on your requirement like for status 'S' set the attribute to ~Icon/SuccessMessage and if status is 'E', set it to ~Icon/ErrorMessage at runtime.
Now in the settings for ALV use the following code:
* Display icon in column seatsocc
DATA: lr_column TYPE REF TO cl_salv_wd_column,
        lr_image TYPE REF TO cl_salv_wd_uie_image,
        lv_icon TYPE string.
lr_column = lv_model->if_salv_wd_column_settings~get_column( 'SEATSOCC' ).
CREATE OBJECT lr_image.
lr_image->SET_SOURCE_FIELDNAME( 'STATUS' ).
lr_column->set_cell_editor( lr_image ).
in the above code, column 'SEATSOCC' will be displayed as an icon.
Sample code to fill the attribute 'STATUS'
LOOP AT lt_flights INTO ls_flight.
    lv_seatsfree = ls_flight-seatsmax - ls_flight-seatsocc.
    IF lv_seatsfree = 0.
      ls_flight-status = 'ICON_RED_LIGHT'.
    ELSEIF lv_seatsfree <= 50.
      ls_flight-status = 'ICON_YELLOW_LIGHT'.
    ELSE.
      ls_flight-status = 'ICON_GREEN_LIGHT'.
    ENDIF.
    MODIFY lt_flights FROM ls_flight.
ENDLOOP.
Hope this helps!
Regards,
Srilatha
Edited by: Srilatha M on Jun 25, 2010 12:02 PM

WLC displays different IP for LAP in GUI

Similar Messages

Maybe you are looking for