WLC Guest access Daily user/password

Hi,
  I have a WLC 2100 and 1131 LAP's does anyone know whether it is possible to create a local net guest user that either has a changing daily password or whether it is possible to create multiple users that are only valid for a specific time period. Basically all i want to do is, once a month create new users or passwords for each day of the month and the credentials are only valid for that day.  I can see that i can time limit users but this would mean creating the user at midnight every day.
Many Thanks

Hi,
Q1: it is possible to create a local net  guest user that either has a changing daily password?
A1: No that is not possibe on WLC local guest users
Q2: it is  possible to create multiple users that are only valid for a specific  time period?
A2: Yes, you have lifetime per guest user that can be configured.
For your requireent, You need to maybe have a look to other Guest appliance like the NAC Guest Server, or create the user DB on ACS Radius Server for time restrictions.
Thx
Serge

Similar Messages

  • WLC - guest account multiple users

    Hi,
    I have been looking at guest access features of the WLC and I can see the ability to specificy an account duration as a Lobby Ambassador but does the WLC support multiple logins per guest account?
    I.e. I want to create a single guest account for use by 100 users. Is there any way to achieve this or would I need to create 100 individual guest user accounts?
    Many thanks,
    Paul.

    Paul,
    If you have WCS available, you can import a .csv file that contains the proper information for usernames/passwords:
    http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0temp.html#wp1102820
    Example file would look like:
    Username   Password   Profile     Description
      User1      Cisco      Any Profile Net User 1
      User2      Cisco                  Net User 2
      User3      Cisco      Internal    Net User 3
    The other option I can think of would be to build a list of command line configurations for the WLC, and manipulate the list with your already created usernames/passwords in a text editor. The command to configure a guest user on the WLC CLI is:
    config netuser add wlan userType [lifetime ] [description ]
    Thanks,
    -Patrick

  • WLC Guest Access Randomly and Print

    Hi all, in my company have asked me a solution where automatically creates the guest account with username and password randomly. Is this solution possible to implement? With only the WLC?    p.s. you also know which models \ brands of printers allow you to press a button and print a receipt(with user\password) that can be integrated with the WLC??  Thank you.

    Hi Marco,
    WCS is software of license. right. But it is now being replaced by NCS; its elder brother, which is an appliance. I think WCS now is out of sale and NCS is what is available (not sure).
    No modifications need to be done on WLC. you only add the WLC to the WCS (or NCS). This needs correct SNMP information to be configured on both sides.
    If you have some programming experience you may implement the random username/password implementation yourself. Just capture the traffic when WCS send an SNMP packet to the WLCs to create the guest account. Whenever you want to create a user you specify same packet but change the usrename and the password and send the same packet to the WLC. Of course you need the sender IP address to the SNMP community list in the WLC.
    For the printer part it is a bit harder. your program should be integrated with the printer and prapare the layout that will be printed.
    HTH
    Amjad

  • WLC Guest Access Internet Routing

    Not sure if this the right forum, but i'm wondering if anyone can explain this.
    I have a trunk from the wlc to my router with one switch in between. 
    wlc---trunk----3560---trunk---2821
    The interface on the wlc and the 2821 both have an ip address and can ping each other.  When a wireless client connects to the guest network they cannot access the internet unless the 3560 switch has an ip address set on the vlan that is trunked from the wlc to the router
    wlc(vlan 825 - 10.7.200.2)----trunk-----3560(vlan 825 - 10.7.200.3)-----trunk-----2821(vlan825 - 10.7.200.1)
    The gateway for the clients is 10.7.200.1 which is the router.  If i take the ip address off of the vlan interface on the 3560 the trunk is still there, but the clients on the guest network cannot get through.  The gateway on the interface on the wlc is also set to 10.7.200.1
    Any ideas why I need that ip address on the 3560?
    Dan.

    Hi Dan,
    you may send the switch "show tech" and the WLC "show run-config" taken with the problematic config for a quick look.
    Regards,
    Federico

  • WLC Guest access to managment IP

    Hy! I've setup a Guest Wireless Acess using web auth. I've created a new dynamic interface with an IP range different from the one used in the production SSID.
    I've created a new VLAN in core switches (L2) and connected a Internet acess only router in the VLAN.
    The DHCP is handled by the WLC and is working fine. The network has the Internet Router as the Gateway.
    The issue is that from the wireless guest client I can ping the WLCs Management Interface (complete different network). I've accessed the Internet router and from there I can't reach the Management Interface. The good news is that even beeing able to reach the Management IP wireless guest can't access the controller, but still this is odd and raises all kind of questions about security.
    Has anyone experienced this same thing? Can anyone explain what is happening?
    Thanks,
    Tiago Molinos

    Well if you can ping the management interface of the wlc, then make sure you have management via wireless disabled. On you L3 interface, create some ACL's to deny guest network to your internal network.

  • How can i access my user password

    I can't download things to my macbook because i don't know my password to the user1 the store where i bought it at set it up and i don't know it is there anyway i can change it without having to go back to the store?

    Boot from your install disc and reset it in there. Use 'Reset Password' from the Utilities drop down window. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • WLC Wireless Guest Access

    Hi
    When a user attempts to connect to a WLC
    guest access SSID, does the web login page open up automatically?
    Also is the web login page "https" secure rather than "http" clear text
    Mark

    As long as the WLC can resolve the users home page, which is not an intranet site or https, then the user will get a certificate error page first in which he or she will have to accept. Then he or she will get the webauth page. To eliminate the certificate error page, you need to install a 3rd party certificate, one that is standard on the device trusted certificate store.

  • Guest and all users have invalid password

    Dear all,
    os oul5x64
    ebs 12.1.3
    when login from login page no one can connect because somehow guest user password was invalid.
    using note How To Successfully Change The Guest Password In E-Business Suite 11.5.10 and R12 (Doc ID 443353.1)
    and was able to change guest password and now had to change password for every users.
    This is a test ENV so not many users on it.
    Question: How can i find down what happened to GUEST and all users password.
    and where to check.
    Thanks in advance.
    Regards,

    Thanks Hussein,
    there is some error in the application.log file.
    Would you please advise.
    Regards,
    13/09/18 15:27:53.717 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:72)
            at sun.nio.ch.IOUtil.write(IOUtil.java:43)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.writeFullyImpl(Channels.java:59)
            at java.nio.channels.Channels.writeFully(Channels.java:81)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:155)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:662)
    13/09/18 15:32:25.704 html: OABodyBean, localName='body': Could not find partial target: PayablesReviewSettings
    13/09/18 15:33:50.414 html: OABodyBean, localName='body': Could not find partial target: PaymentMethodCode2
    13/09/18 15:33:50.414 html: OABodyBean, localName='body': Could not find partial target: PaymentDocumentName
    13/09/18 15:33:50.415 html: OABodyBean, localName='body': Could not find partial target: BankAccountName
    13/09/18 15:43:05.385 html: OABodyBean, localName='body': Could not find partial target: SendPaymentARFlag
    13/09/18 15:43:05.385 html: OABodyBean, localName='body': Could not find partial target: SSNId
    13/09/18 15:46:30.744 html: OABodyBean, localName='body': Could not find partial target: SendPaymentARFlag
    13/09/18 15:46:30.744 html: OABodyBean, localName='body': Could not find partial target: SSNId
    13/09/18 15:47:34.80 html: OABodyBean, localName='body': Could not find partial target: SendPaymentARFlag
    13/09/18 15:47:34.80 html: OABodyBean, localName='body': Could not find partial target: SSNId

  • Guest Access for Windows Services

    Hi,
    I need to access my shared files through a "Guest" access, without a password. I understand it is not a safe way to work, but I do not have a choice : I am using a device named mediagate, which is supposed to be able to read the shared files on my computer, and this device can only connect to my computer using a "Guest" access.
    I understand OS X server could do that (refering to http://docs.info.apple.com/article.html?path=ServerAdmin/10.4/en/c4wn14.html), but I am using OS X tiger 10.4.4 workstation. Is there anyway for me to do that ? Otherwise, the mediagate I bough is totally useless...
    Thanks for your help !
    iMac G5   Mac OS X (10.4.4)  

    Hi Marco,
    This behavior is a limitation that we are looking into providing a solution in a future update.
    Thanks,
    Robert
    Robert Bruckner   http://blogs.msdn.com/robertbruckner
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • E4200 - Configure guest access

    In my neighborhood, people generally allow open WiFi access to each other. The "guest access" feature of this router sounded good - you can allow guests to access the internet, without allowing them access to your own computer's transmissions. However, annoyingly, there is no way to configure guest access without a password. You can change the password, but guests have to come see you and ask you what the password is. No freedom to configure the router the way I want. Sending it back for a refund.

    Well, if you have configured the router manually or even with the Cisco Connect you cannot disable the open security mode for the guest network. A password will have to be entered after launching a web browser.
    The secured mode of the Guest Network cannot be disabled and will always require your guests to enter a password through a web browser. The prompt will appear everytime guests connect. This is to prevent unauthorized Internet access.

  • LWA Guest Access with ISE and WLC

    Hi guys,
    Our Company try to implement Guest Access with ISE dan WLC with Local Web Auth Method. But there is problem that comes up with the certificate. This is the scenario :
    1. Guests try to connect wifi with SSID Guest
    2. Once it connect, guests open the browser and try to open a webpage (example: cisco.com)
    3. Because, guests didn't login, so it redirect to "ISE Guest Login Page" (url became :
    https://ise-hostname:8443/guestportal/Login.action?switch_url=https://1.1.1.1/login.html&wlan=Guest&redirect=www.cisco.com/
    4. If there is no ISE Guest Login Page installed, message Untrusted Connection message will appear, but it will be fine if they "Add Exception and install the certificate"
    5. After that the Guest Login Page will appear, and guests input their username and password.
    6. Login success and they will be redirected to www.cisco.com and there is pop up from 1.1.1.1 (WLC Virtual Interface IP) with logout button.
    The problem happen in scenario 6, after login success, the webpage with ISE IP address and message certificate error for 1.1.1.1 is appear.
    I know it happened when guests didn't have the WLC Login Page Certificate...
    My Question is, is there a way to tunneling WLC Certificate on ISE ? Or what can we do to make ISE validate WLC Certificate, so guests doesn't need to install WLC Certificate/ Root Certificate before connect to Wifi ?
    Thx 4 your answer and sorry for my bad English....

    Thx for your reply Peter, your solution is right,
    i don't choose CWA, because their DNS is not stable...
    i've found the problem...
    the third-party CA is revoked, so there is no way it will success until it fixed...
    and there is no guarantee, they will fix it soon..
    so solution that we choose is by disable "HTTPS" on WLC...
    "config network web-auth secureweb disable".
    "config network web-auth secureweb disable".
    "config network web-auth secureweb disable".
    "config network web-auth secureweb disable".
    "config network web-auth secureweb disable"
    thank you all...

  • Wired guest access on WLC 4400 with SW 7.0.240.0

    Hello,
    after we upgrade our Wlan-controller 4400 from software 7.0.116.0 to 7.0.240.0
    wired guest access don't work anymore.
    All other things works fine, incl. WLAN guest access!
    When we try wired guest access, we get the web-authentication page and can log in.
    On the controller we can see that the Policy Manager State changes from WEBAUTH_REQD
    to RUN.
    But then there is no access to the internet.
    We tried also SW 7.0.250.0, same problem!
    Log Analysis on the WCS:
    Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :The WLAN to which client is connecting does not require 802 1x authentication.
    Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client does not have an IP address yet.
    Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client L3 authentication is required
    Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client Moved to DHCP Required State.
    Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Mobility role update request. from Unassociated to Local Peer = 0.0.0.0, Old Anchor = 0.0.0.0, New Anchor = 10.101.200.11
    Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Mobility role changed. State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
    Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :DHCP successful.
    Time :03/12/2014 14:21:26 MEZ Severity :ERROR Controller IP :10.101.200.11 Message :Client got an IP address successfully and the WLAN requires Web Auth or Web Auth pass through.
    Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client IP address is assigned.
    Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Webauth user logged in to the network. manni
    Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :AAA response message sent.
    Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client has completed Web Auth successfully.
    Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client has completed Web Auth successfully.
    Trying http://www.google.de .... doesnt work. No Log Entries. Next entries while logging out.
    Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Web auth is being triggered again.
    Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client L2 authentication has been completed successfully.
    Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client Moved to DHCP Required State.
    Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :WebAuth user Logged out from network.
    Has someone a idea how to solve this problem?
    Regards
    Manfred

    Hi
    Yes got it resolved. It turns out that the connection from the wired guest access port to the WLC must be L2. That is the switch that the wired guest acces sport is connected and WLC are connected to must be L2 only. We were using a single switch to do the testing and it was also doing the routing for the test LAN. Even though there was no L3 VLAN interface configured for the VLAN that the guest access port was on for some reason this breaks it. Absolu Didnt have chance to work out the exact limitations of this as we simply made the switch L2 only and configured an 802.1Q trunk to the Internet router and made subinterfaces on the router for the wired and wireless egress ports and it worked then. No config change was needed on the WLC at all.
    The only thing I can think of is that it's something about the way the WLC joins the wired guest access ingress VLAn and egress VLAN. The WLC isn't a reall router it says so in the documentation. I think the packet coming from the wired access port is being bridged to the egress VLAn not routed and this is what screws it up (remeber with a router the source and destination MAC addresses would be changed with a bridge they aren't). Got to be something along those lines. If you have a bigger newtork with a guest anchor WLC handling this function you dont run into this as the traffic is coming over an EOIP tunnle from the remote WLC so the switch with the guest anchor WLC doesnt see the MAC address of the wired guest PC.

  • TIMEOUT error from adstrtal.sh -- even after made Guest user password same

    I have migrated E-bus Database from HPTru64 to SunSolaris (Still Object differences are there).
    when I try to start application I got TimeOUT error.
    1)I made GUEST password same in <Context>.xml & $FND_TOP/11.5.0/secure/*.dbc file to ORACLE
    2)ran adautocfg.sh on all apps nodes
    still I get same error...
    SQL> SELECT fnd_web_sec.validate_login('GUEST','ORACLE') FROM dual;
    FND_WEB_SEC.VALIDATE_LOGIN('GUEST','ORACLE')
    N
    SQL>

    Sawwan,
    I got below error...
    I am in the process of migration, I may not be able to use OAM unless I start the application..
    ====================
    SQL> @afgstusr.sql
    PL/SQL procedure successfully completed.
    ERROR: The Profile "Guest User Password" is not set correctly, the current
    value is "GUEST/ORACLE" and failed FND user validation.
    Oracle Applications requires a "GUEST" user account for special restricted
    access functions. The "<GUEST User Name>/<Password>" is stored in the
    profile option "Guest User Password" for Applications program use. In this
    instance the profile option is not set, or does not represent a valid
    User_name/Password combination.
    CORRECTIVE ACTION: The profile needs to be set to a valid User_name/Password
    combination, preferably the combination for the seeded user account "GUEST".
    The profile can be set using the Oracle Forms Interface and the System
    Administrator Responsibility.
    Navigate -> Profile -> System -> Query Site level profile:
    "Guest User Password"
    Alternatively, if the profile value shown above is defined and set to what
    you think should be the correct value, you may need to reset the GUEST user
    account password from the Oracle Forms Interface. Again using the System
    Administrator Responsibility.
    Navigate -> Security -> User -> Define -> Query "User Name":
    Type a temporary password in the "Password" field -> hit the Tab Key
    and confirm the password ... Then log in to Oracle Applications Forms
    Interface as this user and change the password, when prompted to do so,
    to match the value set in the "Guest User Password" profile.
    Finally if the Oracle Forms Interface is not available for some reason you
    can use SQL*Plus and the Applications API - FND_PROFILE.SAVE(). You can use
    the file that generated this message (FND_TOP/patch/115/sql/afgstusr.sql) as
    an example of how to code this function. Set the value to a known good
    User_name/Password combination. Remember to go back and properly set up
    a default GUEST account and to synchronize the profile after your upgrade is
    complete using the appropriate steps shown above.
    DECLARE
    ERROR at line 1:
    ORA-06510: PL/SQL: unhandled user-defined exception
    ORA-06512: at line 15
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    $

  • WIRED GUEST ACCESS WLC 5508

    Hi Guys, 
    I've just set up a wired guest access for my HQ but I'm wondering if it is possible to do the same in a branch office because We do not have another controller in this site, could this be accomplished using the wlc of the hq?
    Any ideas please.
    Regards
    Oscar

    If you have L2 communication between HQ &  BR, this is possible (then you can extend your wired user vlan to your WLC).
    Otherwise you have to have a WLC at your branch as well.
    http://mrncciew.com/2013/03/26/wired-guest-access/
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Snmp error for guest access ticket on two WLC

    Hi,
    I have one wcs (5.0.56.2) and two wlc 4400 ( 5.0.148.2). When i try to create a ticket for guest access on the two wlc without time restriction, it works well. But when I defined time restriction for the ticket, i have a snmp error on the passive wlc (snmp operation to device failed, attempt to set conflicting attribute value) and not on the active xlc.
    Thks.

    The lobby ambassador can specify the amount of time that the guest user accounts remain active. After the specified time elapses, the guest user accounts expire automatically.
    The local user database is limited to a maximum of 2048 entries and is set to a default value of 512 entries (on the Security > General page). This database is shared by local management users (including lobby ambassadors), net users (including guest users), MAC filter entries, and disabled clients. Together these cannot exceed the configured database size.
    For the configuration following URL may help you
    http://www.cisco.com/en/US/docs/wireless/controller/5.0/configuration/guide/c5users.html

Maybe you are looking for