WLC integrating with Windows 2008 AD
Hi,
I want to integrate WLC with windows 2008 server. If anybody done this integration i would like to know what are the step i need to do in the Microsoft Side, If you have any document related to MS 2008 integration pls share the information with me.
Thanks in adavence.
Regards,
Sunish
Can you provide more detail around what you mean by integrate? I don't think a WLC can talk directly to AD (Kerberos, LDAP, or otherwise).
If what you mean by "integrate" is to be able to authenticate wireless users against AD, then you will need something to proxy that authentication. That is usually a RADIUS server. Cisco ACS and Microsoft IAS and two common RADIUS servers, both of which can talk to AD. Check out the Cisco ACS 4.2 configuration guide for a good example. Here's a link to an older Microsoft article, but it still applies to 2008 (Microsoft IAS is still included with Windows Server).
http://www.microsoft.com/downloads/details.aspx?familyid=0f7fa9a2-e113-415b-b2a9-b6a3d64c48f5&displaylang=en
Similar Messages
-
Upgrading R / 3 4.7 system to ECC6.0 with EHP4 along with windows 2008
Hi All,
I am looking for your feedback about the plan for upgrading our Landscape to ECC 6. with EHP4 from R/34.7E.
Current Environment: R/3 4.7X110 with SQL 2000 in 32 bit windows 2003
Planning to upgrade to the level of : ECC6.0 with EHP4 64 bit windows 2008, SQL 2005 Database
Based on the previous experience in upgrade I have planned in the following ways.
Since my basis component is in the level of 63, its possible for me to restore the SQL 2000 database in SQL 2005 (Using System copy tool )
Step 1: Migration of OS / DB using system copy tool (R/3 4.7 with SQL 2005 in 64 bit Windows 2003 ), Then will leave the system for testing for some period and after the confirmation, planned to start the upgrade
Step 2: By meeting all the prerequisites, Planned to upgrade to ECC6.0 with EHP4 on the OS / DB upgraded system.
Step 3: Once the upgrade completed / With the confirmation from the functional and technical consultants, I planned to upgrade the windows 2003 to windows 2008 using system copy tool.
Note: I am not using SQL 2008 - Project decision.
The above mentioned plan is the only way(proper way) for doing such activities or is there any other way to shorten the project.
I should not ask the below question (Even after reading PAM and SAP note 1054740), But kindly regret me for asking this one, out of own curiosity, i am asking the below one.
1. Is there any possible to install SAP R / 3 4.7 in windows 2008 with 2005 (This will help me to shorten the project). I am completely aware that SAP wont support R/3 4.7 with windows 2008, if its not at all possible is there any other work around for me to shorten? Let me know your suggestions and thoughts
Your valuable inputs will help me to proceed further with the plans (I surfed the SDN and read master guides already) . I really want to make sure , the way which i am going is the right one.
Thanks and Regards
Vijay KumarHi Jitendra,
Hope you should check the PAM again , Its supported for sure and also for upgrading to EHP4 - SQL 2005 is the Prerequiste.
Hi Abhi and Others,
Thanks for all your support.
I have successfully completed the project for my landscape and it was a great success too.
As you all said, since I had the hardware availability and time frame as well. Hence, I have tried both the possibilities.
Note :I would prefer and stick with the SAP proposed and supported way and even for my project I have followed the same. So I would recommend to stick with SAP supported one.
But for the own technical interest I have tried the other option as well which is not supported by SAP and also faced some typical issues as well / but solved on my own with some tricks and other activities. So, this option is also possible but highly risked one and of course(more importantly) which is not supported by SAP. So, i would recommend to go with the SAP recommended way.
Thanks for everyone and I am closing the thread
Regards
Vijay -
Performance problems on a Oracle 11G with Windows 2008 64bits.
Hi everyone,
I have noticed that our db is going low and low every week. My server has 16GB RAM and 10GB are dedicated to the Oracle database, this is a 11.2.0.1 with Windows 2008 R2 SP1 64bits. I like to know acording to the nexts values what you guys recommend to adjust in the init.ora:
orcl.__db_cache_size=5402263552
orcl.__java_pool_size=33554432
orcl.__large_pool_size=33554432
orcl.__pga_aggregate_target=3657433088
orcl.__sga_target=6878658560
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=1308622848
orcl.__streams_pool_size=33554432
*.memory_target=10511974400
*.open_cursors=5000
*.optimizer_mode='RULE'
*.processes=300
Acording to the memory target on how values can be increased the processes, pga_agregate_target, etc.
Also we have problems related to the bug Bug 9593134 that “Connections to Oracle 11g are slow and can take anywhere from 10 seconds to 2 minutes.” there is a fix on linux by removing the dns names on it but anyone have experience on windows platforms?
Thanks for all and sorry for my english.
Regards.
Arturo.Regarding the long connection times, have you tried using network packet capture software (such as Wireshark) to determine what the client computer is doing when a connection attempt is initiated?
The Oracle Database time model statistics, along with the system wide wait events may help you diagnose the non-connection related performance issues (you should not just look at the statistics, but instead capture the current values, wait a period of time, capture the statistics again, and compare the changes in the statistic values). A statspack report might also help you - but a 10046 trace at level 8 or 12 is more appropriate if you are able to identify a couple of sessions that experience performance problems.
I do not suggest just blindly modifying parameters, although I am curious to know:
* Why the session level parameter OPEN_CURSORS is set to 5000 - do you expect a single session to hold open 5,000 cursors?
* Why are you using the deprecated RULE based optimizer?
* Why is the MEMORY_TARGET parameter used when the SGA_TARGET and PGA_AGGREGATE target are specified?
Charles Hooper
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. -
LMS 2.6 and ACS 4.2 compatible with Windows 2008 R2 Active Directory?
Hi,
We are planning to upgrade CORP Domain from Windows 2003 Active Directory Schema to Windows 2008 R2 Active Directory Schema.
I wanted to know if the following applications which are installed on windows (domain member servers) are compatible with windows 2008 server R2 schema?
CiscoWorks LAN Management Solution 2.6
Cisco Secure Access Control System 4.2
Cisco Fabric Manager 1.5
Any help is much appreciated!- CiscoWorks LAN Management Solution 2.6 - Not supported and this software is EOS-EOL.
www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_end-of-life_notice0900aecd80532c07.html
- Cisco Secure Access Control System 4.2 - Not supported either:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/windows/install.html#wp1041324
- Cisco Fabric Manager 1.5 - Was not able to find anything for version 1.5 and not really familiar with this product. However, according to the below not even version 4.2(7d) supports 2008:
www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/fm/release/notes/20325_10.html#wp657668 -
Weblogic 10.3 with Windows 2008 R2
Hello,
Is Weblogic 10.3.0 certified with Windows 2008 EE R2 (64bit)?
Thanks in advance,
Radu DobrinescuYou can check the list of supported OS from the following link:
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
Within this link search for: System Requirements and Supported Platforms for Oracle WebLogic Server 10.3
It will provide you a excel sheet giving list of all the supported configuration for WLS 10.3.
The excel sheet says that :
Oracle WebLogic Server : 10Rg3(10.3) is supported for
Intel EM64T, AMD64
Windows 2008 (includes SP1+)
Thanks,
Sandeep -
Which files are require for sap IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1 BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1 BS2011 Java Components - NW 7.03 1 of 4
51041992 SAP ERP 6.0 EHP6 Components
51041988_6 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra SaktiHi Bhipra,
You need below DVDs for ERP 6.0 EHP6 IDES
51041985_11
DB2 USER ENV
70SWPM10SP06_4-20009707.sar
70SWPM10SP06
51044815_1
BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51044815_10
BD IDES SAP ERP 6.0 EHP6 Inst. Export 10 of 40
51044815_11
BD IDES SAP ERP 6.0 EHP6 Inst. Export 11 of 40
51044815_12
BD IDES SAP ERP 6.0 EHP6 Inst. Export 12 of 40
51044815_13
BD IDES SAP ERP 6.0 EHP6 Inst. Export 13 of 40
51044815_14
BD IDES SAP ERP 6.0 EHP6 Inst. Export 14 of 40
51044815_15
BD IDES SAP ERP 6.0 EHP6 Inst. Export 15 of 40
51044815_16
BD IDES SAP ERP 6.0 EHP6 Inst. Export 16 of 40
51044815_17
BD IDES SAP ERP 6.0 EHP6 Inst. Export 17 of 40
51044815_18
BD IDES SAP ERP 6.0 EHP6 Inst. Export 18 of 40
51044815_19
BD IDES SAP ERP 6.0 EHP6 Inst. Export 19 of 40
51044815_2
BD IDES SAP ERP 6.0 EHP6 Inst. Export 2 of 40
51044815_20
BD IDES SAP ERP 6.0 EHP6 Inst. Export 20 of 40
51044815_21
BD IDES SAP ERP 6.0 EHP6 Inst. Export 21 of 40
51044815_22
BD IDES SAP ERP 6.0 EHP6 Inst. Export 22 of 40
51044815_23
BD IDES SAP ERP 6.0 EHP6 Inst. Export 23 of 40
51044815_24
BD IDES SAP ERP 6.0 EHP6 Inst. Export 24 of 40
51044815_25
BD IDES SAP ERP 6.0 EHP6 Inst. Export 25 of 40
51044815_26
BD IDES SAP ERP 6.0 EHP6 Inst. Export 26 of 40
51044815_27
BD IDES SAP ERP 6.0 EHP6 Inst. Export 27 of 40
51044815_28
BD IDES SAP ERP 6.0 EHP6 Inst. Export 28 of 40
51044815_29
BD IDES SAP ERP 6.0 EHP6 Inst. Export 29 of 40
51044815_3
BD IDES SAP ERP 6.0 EHP6 Inst. Export 3 of 40
51044815_30
BD IDES SAP ERP 6.0 EHP6 Inst. Export 30 of 40
51044815_31
BD IDES SAP ERP 6.0 EHP6 Inst. Export 31 of 40
51044815_32
BD IDES SAP ERP 6.0 EHP6 Inst. Export 32 of 40
51044815_33
BD IDES SAP ERP 6.0 EHP6 Inst. Export 33 of 40
51044815_34
BD IDES SAP ERP 6.0 EHP6 Inst. Export 34 of 40
51044815_35
BD IDES SAP ERP 6.0 EHP6 Inst. Export 35 of 40
51044815_36
BD IDES SAP ERP 6.0 EHP6 Inst. Export 36 of 40
51044815_37
BD IDES SAP ERP 6.0 EHP6 Inst. Export 37 of 40
51044815_38
BD IDES SAP ERP 6.0 EHP6 Inst. Export 38 of 40
51044815_39
BD IDES SAP ERP 6.0 EHP6 Inst. Export 39 of 40
51044815_4
BD IDES SAP ERP 6.0 EHP6 Inst. Export 4 of 40
51044815_40
BD IDES SAP ERP 6.0 EHP6 Inst. Export 40 of 40
51044815_5
BD IDES SAP ERP 6.0 EHP6 Inst. Export 5 of 40
51044815_6
BD IDES SAP ERP 6.0 EHP6 Inst. Export 6 of 40
51044815_7
BD IDES SAP ERP 6.0 EHP6 Inst. Export 7 of 40
51044815_8
BD IDES SAP ERP 6.0 EHP6 Inst. Export 8 of 40
51044815_9
BD IDES SAP ERP 6.0 EHP6 Inst. Export 9 of 40
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
Hope this helps.
Regards,
Deepak Kori -
Cisco aironet 2600 series AP configuration with windows 2008 R2 Radius server.
I want to know the configuration of Cisco aironet 2600 series AP with windows 2008 R2 Radius server.
I have
1. AD & DHCP Server
2. Cisco Aironet 2600 Access Point.
I want to connect wifi devices through this AP. Authentication should be through Radius server and AD.Hi ,
Below link should support your requirement
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116584-configure-wirelesslan-00.html
Minimal command : -
AP(config)# aaa new-model
AP(config)# radius-server host 172.20.0.1 auth-port 1645 acct-port 1645 key XXXXXX
AP(config)# radius-server deadtime 10
HTH
Sandy -
Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
I have a Windows 2008 R2 server which is experiencing random BSOD during the night. This is occurring maybe once or twice a week. I have gathered two Memory crash files. This server is running Citrix XenApp 6.5 but nothing else is reporting an issue except
for the memory dump. I’m looking for assistance in reading crash file and finding the cause.
I’ve spent over a week going through articles trying to learn and trouble shoot the BSOD but no closer to understanding the WinDbg 6.3.9600 report.
This is a production server and I have verified that Windows Updates has updated the server with latest releases. I’m hoping that the crash file will show something before I have to run the Driver Verifier.
The crash zip file is located -
https://onedrive.live.com/redir?resid=9644A4E0A26873B1!2359&authkey=!AMS4Svuk-SS3-JA&ithint=file%2czip
* Bugcheck Analysis
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: fffff880009eff38, Virtual address for the attempted execute.
Arg2: 8000000002cfe963, PTE contents.
Arg3: fffff8800da2eea0, (reserved)
Arg4: 0000000000000002, (reserved)
Debugging Details:
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xFC
PROCESS_NAME: powershell.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff8800da2eea0 -- (.trap 0xfffff8800da2eea0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80070f3648 rbx=0000000000000000 rcx=fffffa80070f3648
rdx=fffff8800da2fbf8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001680b80 rsp=fffff8800da2f030 rbp=fffff8800da2fbd0
r8=fffff8a01804c680 r9=fffff8800da2fc68 r10=fffffffffffffffd
r11=fffff8800da2fa90 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up di pl nz na pe nc
nt!KiPageFault:
fffff800`01680b80 55 push rbp
Resetting default scope
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+44dfc
fffff800`017008b8 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+44dfc
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb
IMAGE_VERSION: 6.1.7601.18409
FAILURE_BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xfc_nt!_??_::fnodobfm::_string_+44dfc
FAILURE_ID_HASH: {aa632d36-b0f7-67cf-89e2-1cec389c0a11}
Followup: MachineOwnerHi Kaysel_GTG,
Just addition. Regarding to Bug Check 0xFC, please refer to following article and check if can help you.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
By the way, since it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
if any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu -
Which file are require for sap IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1 BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1 BS2011 Java Components - NW 7.03 1 of 4
51041992 SAP ERP 6.0 EHP6 Components
51041988_6 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra SaktiHi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1 BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1 BS2011 Java Components - NW 7.03 1 of 4
51041992 SAP ERP 6.0 EHP6 Components
51041988_6 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra Sakti -
One day watched videos with no problem. Next day, can't watch videos! Site says I need Flash 10.0 or higher. When I try to check what version I have, it says that Flash player is integrated with Windows 8, no need to install Flash Player. I am thinking that there are newer versions of Flash Player than what is integrated with Windows 8, but it's like I'm going around in circles, can't seem to upgrade to a newer version.
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
Is Oracle 10g compatible with windows 2008?
Hi All,
Is Oracle 10g compatible with windows 2008?
What are the OS's oracle 10g compatible with? Is it compatible with VMware environment too?
Regards
Arunuser12273523 wrote:
Hi All,
Is Oracle 10g compatible with windows 2008? Yes
What are the OS's oracle 10g compatible with? Is it compatible with VMware environment too?please check
http://www.oracle.com/technology/software/products/database/index.html
Regards
Rajesh -
Can someone give me some hint on how to resolve this issue?
I bought the X200 and installed Windows Vista 64 bit without a problem. I am now creating a VM with Windows 2008 64bit but received this message after installation and reboot: "Attempting to load a 64-bit application, however this CPU is not compatible with 64-bit mode."
The CPU is Intel P8600 which is 64-bit compatible. Why did Vista 64-bit install and run properly and not Windows 2008?
Thanks !I found the answer to my question on this blog...
http://www.aspdeveloper.net/Virtual_PC/rn-739-53140_Does_VPC_support_64_bit_OS.aspx
Basically, yes with VMWARE only, not MS VPC... -
How to Upgrade Service Manager 2012 SP1 with Windows 2008 R2 to SCSM 2012 R2 with Windows 2012 R2
Hi,
We are using Service Manager 2012 SP1 UR2 with Windows 2008 R2.
I am planning to upgrade Service Manager to R2 with Windows 2012 R2. I found the steps to upgrade SCSM 2012 Sp1 to R2 but need assistance to upgrade with 2012 R2 OS.
Please suggest how to achieve the above mentioned objective.
Regards, Syed Fahad AliVirtualization solves this problem handily, by allowing you to create a new server to run the new program on the same hardware. it also solves the related problem of moving off unsupported hardware without changing OS or application. VMware is my personal
favorite, but Hyper-V, Xen, and VirtualBox all have similar capabilities.
Compare the cost of work and confidence in success of a upgrade, where any of thousands or millions of uncontrolled settings could cause an issue, to the cost of work and confidence in success of installing a new OS instance and configuring a known state
for the new environment.
In short, upgrades should no longer be a thing. there are just too many ways they can go wrong, and it's far too easy to create a new OS with minimal expense and effort. -
Is anyone know whether Oracle EBS 11.5.x/12.0/12.1 are certificated with windows 2008?
Hi;
Is anyone know whether Oracle EBS 11.5.x/12.0/12.1 are certificated with windows 2008?If you mean IE8 answer yes for r12,but for ebs11 answe is no
please follow:
Recommended Browsers for Oracle E-Business Suite Release 12 (Note 389422.1)
Regard
Helios -
WLC 5508 LDAP Windows 2008 Server - auth based on AD groups
hi NG,
i'm trying to web-authenticate my Wifi user of an WLC 5508 against LDAP.
Thereby i'm trying to autenticate all users within a GROUP, not an OU within the MS Active Directory based upon an Windows 2008 Server.
I can authenticate against a user, witch is beeing put into an OU, according to examples based here: https://www.cisco.com/en/US/products/ps6366/prod_configuration_examples_list.html
Checking based upon Users within OUs works fine.
But i have not got all of those users wihin one single OU!
Need help for following: LDAP-Auth based on AD Groups:
Using:
MS-Domain: MY-DOMAIN.CH
AD-GROUP: VPN-USERS
AD-Structure:
MY-DOMAIN.CH
|
GROUPS
|
Administrative Groups
|
VPN-USERS
(-> Member of this Groups (Wireless1, Wirless2, ...)
Server Adress: IP.IP.IP.IP
Port: 389
Enable Server Stats YES
Simple Bind Authenticated
Bind Username LDAP-USER
Bind Password supersecret
Bind Passw. confirm supersecret
User Base DN: ?-1-?
User Attribute: ?-2-?
User Object Type: Person
Server Timeout 2
What happens for instance, if i put a GROUP within a GROUP regarding the LDAP Authentication.
I guess i have to authenticate against the "upper" GROUP, or do i have to create an entry on the WLC for every GROUP i'm questoning?
Could some one provide my with an example, since i have not found documentation regarding this topic.
Thank you.Hi,
User Base DN : this is in case you want to restrict the search area. If you put "dc=mydomain,dc=CH", you will search your whole AD. Depending on the size, it can be slow ...
Remember that the User Base DN is also used for the admin user.
In conclusion, User Base DN should be the most restrictive path that leads to both the admins and the users you want to authenticate.
Example :
OU=Employees,OU=Humans,DC=Mydomain,DC=CH
This would prevent to search in machines or any assets. This implies that the admin you bind with is an employee and you are only authenticating employees. You can have any number of OUs under employees, it doesn't matter
Attribute : This is the object attribute that the WLC uses to compare with the user name. In general, you would go with sAMAccountName in AD. CN would be another common example for LDAP databases.
If what you are looking for is to restrict access and only authenticate people who belong to a certain group. Then you need a radius server like ACS.
That server will be able to make selections and check the "memberOf" attribute to make sure it is in a certain group.
Nicolas
===
Don't forget to rate answers that you find useful
Maybe you are looking for
-
How i got my all contacts back to my iphone
plz help me out how i got back to all my contacts back to my iphone 4s
-
Security with Windows on an iMac OS X10.4
If I load Windows XP on my iMac, am I going to run into the same horrific security issues I had with Windows? The reason I went to a Mac was to get rid of all the viruses, etc. Also, do I need a special version of XP for the Mac or just load the soft
-
In about a month, I'm going on holiday. hr flight.. Lovely. So obviosly, I want to bring my player along to listen to my music while on the flight. I may just be paranoid, but I'm wondering if I can use the player, as it has a FM radio on it's I don'
-
I am new to flash and I need some advice and/or some examples on how to design a banner . The banner I am trying to create is going to be basic, photos that changes with words in them... Are there any templates I can use to get started? Thank you.
-
I hit some kind of command on my Final Cut Pro, and my canvas, timeline and tool bench all disappeared. I tried going to "window" to view them, but they are all greyed out, and I can't click on them or use the keyboard commands. I tried closing and o