WLC ios version 7.0

Dears,
With the new ios version 7.0 on WLC 5500 , is there a requirment for any additional license to deploy MESH or office extend ? 
or let me put it this way If we just upgrade the IOS to 7.0 on the old WLC do we have to purchase any addional license to deploy MESH or office extend?
Regards
Saim Akram

If your current WLC version is 6.0.196.. Then there is note in the link which i provided..
Note All  features included in a Wireless LAN Controller Wplus license are now  included in the base license; this change is introduced in release  6.0.196.0. There are no changes to WCS BASE and PLUS licensing.
Regards
Surendra

Similar Messages

  • Cisco AIR-LAP1041N-E-K9 not working with WLC 4402 version 7.0.116.0

    Hi All,
    appreciate your support for a problem i started facing today. i have a Cisco WLC 4402 running version 7.0.116.0 and it is working great with 25 Cisco 1252 APs. we have recieved a new 20 Cisco 1041N APs today and i installed one in our site but it doesn't work. it worked fine and loaded the image from flash and got the WLC ip address through DHCP option and started showing the below error:
    *Mar  1 00:00:10.021: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
    *Mar  1 00:00:10.033: *** CRASH_LOG = YES
    *Mar  1 00:00:10.333: Port 1 is not presentSecurity Core found.
    Base Ethernet MAC address: C8:9C:1D:53:57:5E
    *Mar  1 00:00:11.373: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
    *Mar  1 00:00:11.465: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1088 messages)
    *Mar  1 00:00:11.494:  status of voice_diag_test from WLC is false
    *Mar  1 00:00:12.526: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:13.594: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:13.647: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 12.4(23c)JA2, RELEASE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Wed 13-Apr-11 12:50 by prod_rel_team
    *Mar  1 00:00:13.647: %SNMP-5-COLDSTART: SNMP agent on host APc89c.1d53.575e is undergoing a cold start
    *Mar  1 00:08:59.062: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Mar  1 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio
    *Mar  1 00:08:59.138: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:08:59.837: %SSH-5-ENABLED: SSH 2.0 has been enabled
    *Mar  1 00:09:00.145: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:09:09.136: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e
    *Mar  1 00:09:17.912: %PARSER-4-BADCFG: Unexpected end of configuration file.
    *Mar  1 00:09:17.912:  status of voice_diag_test from WLC is false
    *Mar  1 00:09:17.984: Logging LWAPP message to 255.255.255.255.
    *Mar  1 00:09:19.865: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
    *Mar  1 00:09:19.886: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:09:20.873: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar  1 00:09:20.874: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
    Translating "CISCO-CAPWAP-CONTROLLER.atheertele.com"...domain server (172.16.40.240)
    *Mar  1 00:09:29.029: %CAPWAP-5-DHCP_OPTION_43: Controller address 172.16.100.102 obtained through DHCP
    *May 25 08:27:02.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:02.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *May 25 08:27:03.175: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:03.177: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
    *May 25 08:27:03.177: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *May 25 08:27:03.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *May 25 08:27:03.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
    *May 25 08:27:03.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
    *May 25 08:27:03.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
    *May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio
    *May 25 08:27:03.448:  status of voice_diag_test from WLC is false
    *May 25 08:27:14.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:14.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *May 25 08:27:15.185: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:15.186: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
    *May 25 08:27:15.186: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *May 25 08:27:15.330: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *May 25 08:27:15.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
    *May 25 08:27:15.334: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
    *May 25 08:27:15.334: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
    *May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio
    *May 25 08:27:15.450:  status of voice_diag_test from WLC is false
    *May 25 08:27:26.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:26.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *May 25 08:27:27.182: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:27.183: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
    *May 25 08:27:27.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *May 25 08:27:27.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *May 25 08:27:27.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
    *May 25 08:27:27.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
    *May 25 08:27:27.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
    *May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio
    *May 25 08:27:27.433: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *May 25 08:27:27.446: %PARSER-4-BADCFG: Unexpected end of configuration file.
    *May 25 08:27:27.447:  status of voice_diag_test from WLC is false
    *May 25 08:27:27.448: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *May 25 08:27:27.456: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *May 25 08:27:38.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:38.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *May 25 08:27:39.183: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:39.184: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
    *May 25 08:27:39.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *May 25 08:27:39.326: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *May 25 08:27:39.329: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
    *May 25 08:27:39.329: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
    *May 25 08:27:39.330: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
    *May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio
    *May 25 08:27:39.446:  status of voice_diag_test from WLC is false
    *May 25 08:27:49.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:49.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *May 25 08:27:50.179: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:50.180: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
    *May 25 08:27:50.180: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *May 25 08:27:50.323: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *May 25 08:27:50.326: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
    *May 25 08:27:50.326: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
    *May 25 08:27:50.326: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
    *May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio
    *May 25 08:27:50.425: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *May 25 08:27:50.438: %PARSER-4-BADCFG: Unexpected end of configuration file.
    i searched for the regulatory domains difference between  AIR-LAP1041N-E-K9 and  AIR-LAP1041N-A-K9 and didn't find any difference that may affect the operation of this AP.
    just to mention that our configuration in WLC for regulatory domains is:
    Configured Country Code(s) AR 
    Regulatory Domain  802.11a:  -A
                                 802.11bg: -A
    My question is, should i only include my country in the WLC (IQ) to add the requlatry domain (-E) to solve this problem? or changing the country will affect the operation of all working APs??
    Appreciate your kind support,
    Wisam Q.

    Hi Ramon,
    thank you for the reply but as shown in the below link:
    http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7.0.html#wp233793
    the WLC in version 7.0.116.0 supports Cisco 1040 seiries APs.
    Thanks,
    Wisam Q.

  • 7925 Phones voice quality issues with wlc 5508 version 7.6

    Hi all,
    I have a mix environment with 1 WLC 5508  and more or less 6 sites with several Access Points ( all AIR-LAP1242AG and all in FlexConnect mode  Hreap ) and several wireless phones (all  CP7925G) . My Ap's have antennas 2.4GHz in all sites except 1 site ( the one i'm talking for now) with 2.4GHz and 5GHz , because of the problems we suggest to have all phone in A BAND (5Ghz) . In this site we force the phones just to A (802.11a only) , power safe NONE , Continuous scan mode , i fallow all in http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/7_0/english/deployment/guide/7925dply.pdf , one thing i didn’t do it was apply QoS because I can’t apply several ios commands in that 2960 with lan lite ios.
    So I have 3 SSID for data and 2 for VOICE  ( one is common to all environment and supports 2.4 and 5Ghz , and other just to test one site , with only 5Ghz  with “[WPA2][Auth(802.1X + CCKM)][Auth(FT 802.1X)]”, because I read that problem can be phone rooming , and in FlexConnect only have fast-roaming in a CCKM or a PKM  key-management solution , but even like this the problem still exist) .
    I have another sites with phones in 2.4GHz running well and others with problems.
    i read here in forums lots and lots of people with similar problems , i tried several solutions ( WLC  upgrades versions  and phones firmware's , ….  ) tried all my best of solving the problems mas now I’m running without any ideas , i did also some site surveys and detect some interferers that why I change phones to 5Ghz , and I run also WLC Config analyser to help me , but all without good success. Some changes solve temporarily problems , but after some time , people reclaim about problems.
    I can open a TAC case but first I want be sure if did all already.
    Can someone try to help me?
    ip phone 7925G firmware : CP7925G-1.4.5SR1.3      
    CUCM 8.6.2
    WLC    5508 : 7.6.120.0
    AP : AIR-LAP1242AG-E-K9    7.6.120.0       (flexconnect)
    Best Regards

    Hi Serge,
    Thanks for the suggestions. I have taken care of all the settings. Problem is , the user is seated in his office cabin and using the 7925 and there is around 50db signal strength in his room from an AP which is just outside the cabin. And this doesnt occur often, when we go to check and make calls, everything is fine whereas the user says it happens sometimes in the morning, evening etc... randomly... where the fone goes blank while in a call.... since the problem never happens when we go to troubleshoot the issue, we really dont know what is going on. This is happening when calling PSTN.
    AP's are not restarting and there is no logs indicating that. Wireless infrastructure looks very much OK cos there are other users who are not experiencing this problem and there is ample coverage all over the floor. I am baffled why only one user has this problem even when he is seated in his office cabin.
    Tried changing phones also, but still remains.
    Question  : i tried to do a linktest from WLC to his phone, but it failed, while linktest to laptops are working fine. Does wlc linktest not working for wireless phones ?
    regards
    Joe

  • WLC IOS upgarde from 4.2.99.0 to 7.0.220.0

    Hi
    I have an WLC with below details:
    Model No:- AIR-WLC4402-50-K9
    Current IOS:- 4.2.99.0
    Upgrade to :- 7.0.220.0
    I wants to upgade WLC with7.0.220.0 IOS. My question is that should i go for direct upgarde from 4.2.99.0 to 7.0.220.0 or is there any IOS version i have to upgarde.

    You need to upgrade to
    4.2.209.0 before upgrading to 7.0.220.0
    Check the following link for more details:
    http://www.cisco.com/en/US/partner/docs/wireless/controller/release/notes/crn7_0_220_0.html#wp796579
    Please Don't Forget to rate correct answers

  • I have synced my ipad with my computer then downloaded latest ios version.  How do I resync my data back to my ipad?

    I have synced my ipad with my computer then downloaded latest ios version.  How do I resync my data back to my ipad?

    You Restore from iTune Backup.The syncing is towards the end of the Restore.
    1. Settings>General>Reset>Erase all content and settings
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Select Network and input Password>Join
    9. Enable Location Service>Next
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Select Restore from iTune Backup
    12. You will see picture of USB cable pointing towards iPad
    13. Connect iPad to iTune (make sure iTune is on standby)
    14. Tap Continue (computer)
    15. Restore iPad from Backup (computer)
    16. See progress bar with estimated time (computer)
    17. See Restore in Progress on iPad
    18. See Apple logo
    19. See Apple and Progress Bar
    20. Slide to Unlock
    21. Copying Apps back to iPad (computer)
    22. You'll see Loading/Installing/Waiting below the Apps (iPad)
    23. Sync Music/Podcast/Movies to iPad (computer)
    24. Sync completed (computer)

  • I have an iphone 5. I have no idea of the ios version in it. Recently i broke my iphone screen and its showing up nothing. it was never synced to itunes or to any pc. When i tried to connect iphone to itunes in my pc it was asking was passcode which

    I have an iphone 5. I have no idea of the ios version in it. Recently i broke my iphone screen and its showing up nothing. it was never synced to itunes or to any pc. When i tried to connect iphone to itunes in my pc it was asking for passcode which i had forgotten ages ago. Suggest me the possible ways to recover my iphone.

    Since the screen doesn't work, it will be challenging to get it working, even thru iTunes. You will need to ask yourself if you want to invest more money in it or get a new one, especially since the contents will be lost since you don't know the passcode. Apple will gladly replace the screen for a cost that represents a significant portion of the price of a new. Once the screen is done, you may or may not be eligible for the free iPhone 5 Battery Replacement Program.
    Or, if you decide to salvage it and are strong of heart and firm of hand, you can replace the screen yourself for less. See here and note they carry kits with all needed tools and parts.

  • How come I can't update my iPad 1 to the new iOS 6 it says my iOS version 5.1.1 is the latest version?

    How come I can't update my iPad 1 to the new iOS 6 it says my iOS version 5.1.1 is the latest version?

    The iPad 1, coming up on three years since it was introduced, has been given two major and a number of minor upgrades to iOS, more than many tablet manufactures provide. The iPad 1's hardware just can't effectively support many of the features in iOS 6. So I don't think that it's particularly unfair for Apple to no longer provide updates. And yes, I do own and manage a number of iPad 1s.
    Regards.

  • I have an iPad 1 that is currently showing software updated at version 5.1.1.  Is it possible to update to iOS version 7 on this device?  My goal is to get Garage Band on this device and the app store is telling me I need iOS version 7.

    I have an iPad 1 that is currently showing software updated at version 5.1.1.  Is it possible to update to iOS version 7 on this device?  My goal is to get Garage Band on this device and the app store is telling me I need iOS version 7.

    Hi,
    If you really need to upgrade you can save a bit of money and get an older version than the ipad Air.
    First, you can sell your ipad 1 to places like gazelle.com, cashforyourmac.com, sellyour mac.com, or many others out there. The sites I listed give you cash. At this point gazelle.com is giving $70.00 for any ipad 1 in 'good' condition. And cashforyourmac will give you $25.00 over what gazelle.com or sellyourmac.com offers you. Shipping is free.
    Then, with that money, go the the Apple online certified refurbished store. As an example, a new 64gb Air costs $699.00. A refurbed 4th gen 64gb costs $529.00 and a 3rd gen 64gb costs $499.00. Personally, I'd skip the 3rd gen. So if you buy a 4th gen 64gb at $529.00 minus what you can get from a sale to above, you can get an ipad 4 64gb for just over $430.00, a savings of savings of about $270.00. (A new 32gb Air is $599.00, a 4th gen 32gb is $449.00, and a 3rd gen 32gb is not on the site right now.) Google it and check if you can get better offers anywhere else. But getting one from the Apple refurb store gives you an essentially new ipad and using the above sites, you're not locked in with a particular site which will give you a gift card and restrict you to their store/site.
    Each Apple refurbished ipad (any version) comes with a new front and back cover, a brand new battery, same return policy, and a full one year warranty with 90 days of phone support. Each comes in a white box like a new ipad with the wall charger and usb cable. The only difference is that it says in small print on the bottom of the box that it is Apple certified refurbished. Also, if you buy refurbs, be sure to check the store many times a day. They can come and go quickly, so when you see what you want, buy it right away. Shipping is free and pretty fast. (We bought two a year and a half ago and they have been great!)
    Hope this helps.

  • My Ipod 5 broke a while ago and I just managed to get a new one. However, when I tried to do a backup to configure it, a window popped up saying it wasn't possible because this devide's iOS version is too old for this backup... what do I do??

    How can I do a backup now if I can't even access this new device to update its iOS version? And if I just select the option of configuring it as a new Ipod so I can update it, will it still be possible for me to download the previous device's backup on it later? I'd hate to lose everything.

    That error message means that your new iPod is not fully updated. Update the new iPod and then restore from the backup of your old iPod.

  • When i tried updating my iphone 4 to the latest IOS version 7.1.1 and at the end of the update it has the icon connect to itunes. When i try connecting to itunes it still doesnt program. Why is this? How can i fix it?

    When i tried updating my iphone 4 to the latest IOS version 7.1.1 it was updating until the end of the update where it had an icon which said connect to itunes. When i try connecting to itunes on my laptop it still doesnt program, by the way my itunes has the latest updae. Why is this? How can i fix it?

    Hey there Raymondd2014,
    It sounds like you had been updating the phone and now it is in recovery mode. Take a look at this info first:
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
    If you are unable to get out of Recovery Mode, use the following article to restore your device with iTunes:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    If you don't see your device in iTunes follow these steps for Windows.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I use an Iphone 4 which had to be replaced recently. However when i did a backup it was on the new IOS version 7, but now that my phone was replaced and i am back on the old IOS version 6 i how do i restore my backup??

    I use an Iphone 4 which had to be replaced recently. However when i did a backup it was on the new IOS version 7, but now that my phone was replaced and i am back on the old IOS version 6 i how do i restore my backup??
    When i try to restore my Back up using Itunes this is the message i get - "Unable to restore backup as the software is old - Please setup as a new device and then try to restore your backup" - Please advise. If i do so are there any chances of loosing my data. At this point in time i would be happy if i could just retreive my contacts list. Any suggestions would be greatly appreciated.

    Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version.  The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

  • Ipod touch 2nd gen and have ios 4.2.1. apps that will not download, higher ios version needed

    I have an ipod touch 2nd gen and have ios 4.2.1. I recently tried to download some apps and received a message that said I need a higher ios version (like 4.3 or higher). I know there used to be apps that worked before but I deleted them. When I tried to re-download them again they say they won't work. Options?
    Thanks
    Westy

    Import the older versions to the iTunes library from your computer or a backup of it, or buy a newer device, or give up.
    (72621)

  • I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?

    I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?

    You would only be able to restore to a backup to iCloud or iTunes:
    Restore from Backup
    Cheers,
    GB

  • My iPhone 5 is not allowing updating to the newest iOS version 6.1.3.

    My iPhone 5 is not allowing updating to the newest iOS version 6.1.3.  I missed doing the 6.1.2 update before 6.1.3 was available.  It wants to install the 6.1.2 update, but, once I agree to the terms it tells me I can't because I am not connected to the Internet.  It is connected to the net, as proved by surfing and iTunes, both by LTE and wireless.  I have tried both a full shutdown as well as the most of the easy tricks to, like with apps updates, to get it to refresh.  Has anyone had this issue since the 6.1.3 release, and is there an easy way to resolve the conflict.

    The next iOS update won't change this.
    Are you able to transfer anything else from your iTunes library and computer via the iTunes sync process such as a movie, TV show, podcast, audio or print book, apps, and photos from your computer?
    What is selected under the Music tab for your iPhone sync preferences with iTunes.

  • Macbook Air (Mid-2013) and iPhone 5s IOS version 8.1 won't connect via bluetooth, anyone know how to fix this problem?

    I have a Macbook Air running OS-X Yosemite and an iPhone 5s running IOS version 8.1. Every time I try to connect the devices via bluetooth is won't connect saying my Macbook Air isn't supported when in actuality it is. Anyone know how to fix this issue? I have restarted both my Mac/Iphone and have turned bluetooth on/off and nothing seems to help. Bluetooth pairing didn't work before I updated to IOS 8.1 so I doubt that is the issue here.

    Pairing an iPhone to a computer (Mac or Windows) is only supported for personal hotspot (sharing the iPhone's cellular internet connection) and then only if your cellular plan supports it. More information: Bluetooth: Why can't I pair my iPhone or iPad with my computer?

Maybe you are looking for

  • How do I get FB3 to not floor my expression numbers?

    I am using Flex Builder 3 and doing custom expressions in the debug view : (serverTime - offsetTime) / (1000 * 60*60*24) = 4 WHen I work this out in the calculator it it 4.99999167 How do I get FB3 to not floor my numbers?

  • WM -Production Supply

    Hi    i configured the WM -PP Configuration After material staging and clicked the Proceed option in the production order . i found the TR thru lx09 (t code) and i did TO...after this i have same  stock is appearing in (production supply) -storage ty

  • LSMW- Recording : Multiple Line Items

    I am trying to create an LSMW recording that simulates transaction O3I7. The thing is that we have different line items. This is similar to a sales order where we have header details and items details. I created a recording. Then I created two struct

  • System Center Operations Manager 2012 SDK: Is there a ways to get MonitoringAlerts by ManagementPack?

    I have a couple of question on SCOM 2012 SDK usage: 1. In SCOM 2012 SDK, GetMonitoringAlerts API has various overloads that allow user (client) to filter alerts by properties, management class etc. but I do not find a way to filter the alerts by mana

  • Discoverer 11g New Features

    Hello All, Can anybody point me to any link or doc on discoverer 11g new features.I want to know whats the new functionality and other enchancements apart from the major change of WebLogic. Thanks in advance Sulakshana