WLC log needs to show AP name instead of MAC

I am looking for a way to show the AP name in my WLC logs (5508). I am now seeing MAC addresses in the logs and it would be easier to immediately see the AP names. I found a command in the AP that should be able to fix this: "logging origin-id hostname". However, since the APs are CAPWAP and connecting to the controller, once the APs are reloaded they lose this config. So I am looking at a solution for configuring this in the WLC...

I do not think you can configure this through WLC as it is not IOS based product. Here are the settings related to AP syslog, that you can change via WLC (syslog host, facility & level)
(WLC) >config ap logging ?
syslog         Set Ap logging syslog level.
(WLC) >config ap logging syslog ?
level          Syslog level.
facility       Facility level.
(WLC) >config ap syslog ?
host           Configures the system logging host for Cisco AP
(WLC) >config ap syslog host ?
global         Configures the global system logging host for all Cisco AP
specific       Configures the system logging host for a specific Cisco AP.
HTH
Rasika
****Pls rate all useful responses ****

Similar Messages

Keynote data labels, can I show category names instead of data values?

I'd like to recreate the chart below in Keynote. The chart below is an excel line chart with the lines removed. In excel I can opt to show category names instead of values for the data labels. Can I do this in Keynote?

You can select member name or alias or both in the Dimension property while creating the form.
It is in the same window as explained earlier, you need to just select both the Member and its Aliase to be displayed on the form.
Thanks,
Ravi

I'm giving my iphone 4 to my sister. How do I get it to show her name instead of mine?

I'm giving my iphone 4s to my sister. How do I get it to show her name instead of mine?

What to do before selling or giving away your iPhone, iPad, or iPod touch

I get email from a friend and it shows my name instead of hers as the sender. how can i fix?

I get emails from a friend of mine and when i receive them they show my name instead of hers as the sender. I will often miss them because I often copy myself on important emails. In my address book, her email is correct.
How can I fix this?

Does your mail account allow you to view the same message in a browser (webmail interface) to see whether this is a problem local to Thunderbird or actually exists in the message on the server?

SAPGUI: Show appserver name instead of host name?

Hi guys,
We have recently migrated our SAP system so that we have 3 application servers on the 1 host. In SAP GUI, when a user is loggod on to one of these application servers, the <i>host</i> name is shown in the bottom-right of the window. Is there any way to change this so that it shows the <i>application server</i> name instead?
Thanks,
Michael.

Hey Watson,
Let me clarify you one thing.
Application server is a physical host. In that you installed three INSTANCES.
Please note that there is a difference between Application server and Instance.
The bottom right hand corner in SAPGui will show the application server in which you logged in, if you want to know the instance in which you are in , then go to System -> Status
Thanks,
Giri

SAML-based claims authentication in SharePoint: how to show Display Name instead of email address?

Hello,
I followed the following step by step guide for SAML-based claims authentication with ADFS:
http://technet.microsoft.com/en-us/library/hh305235.aspx
The authentication works well; however, Sharepoint shows the users’ email everywhere including at the top right suite-bar. I rather to see users’ display name instead of email. Is there any way to have SharePoint shows user’s display name instead of email
address when the primary SAML claim is email address?
Thank you,

You need to be able to import the identity store into the UPA. See http://sharepointobservations.wordpress.com/2013/08/06/sharepoint-2013-configure-user-profile-service-for-adfs-provider/ for
a good step-by-step on how this is configured.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

List of avaliable MDX properties / Always show member name instead of alias

Hi all,
does anyone know if there is a list of ALL available MDX properties which can be used in an MDX query with Essbase?
There is a very small list in the technical documentation (http://docs.oracle.com/cd/E12825_01/epm.111/esb_techref/mdx_properties.htm), however I know there are a lot more properties.
E.g. one property which is not documented is ANCESTOR_NAMES:
WITH MEMBER [Year].[dummy] AS '0', SOLVE_ORDER = 0
SELECT {[Year].[dummy]} on columns,
[Account].Members properties ANCESTOR_NAMES on rows
FROM [App.Db];
Anyone knows if there is such a list?
And another question:
The Query always brings up the alias of the members (e.g. [Account].Members). Is there a way that per default the member name instead of the alias is used? Without using the MEMBER_NAME property?
Essbase version: 11.1.1.3
Thanks
Th

amaerki wrote:
For the second question regarding the member name try the following statement in a MaxL session:
alter session set dml_output alias off;works like a charm, many thanks.
Anyone an idea on the list of properties?
Edit: found something related to XMLA: http://docs.oracle.com/cd/E12825_01/epm.111/aps_admin/ch03s03s07.html
However, e.g. the porperty PARENT_UNIQUE_NAME does not work. Also the Book MDX solutions has a list with it with e.g. PARENT_UNIQUE_NAME specified which does not work...
Anyone an idea how to get a list of all properties valid with MDX using Essbase?

Need help to decipher "name" variations on Mac

When I first set up my iMac recently, I used only Herschel Hochman to establish the account. By the time Mac was finished with it, I ended up with the following variations depending on what I was looking at:
1) Herschel Hochman
2) Herschel Hochman's iMac G5
3) herschelhochman
4) Herschel-Hochman.local
on .Mac 5) hhochman
And, whenever I see the Mac name on the PC as in My Network Neighborhood, it shows up as:
Herschel Hochma_s iMac G5.
Here are the specifics:
When I look in System Preferences under,
"Account", in the left pane it truncates my name as
"Hersch...chman" so I don't know what it is.
In the right section is "Name: Herschel Hochman"
and "Short Name: herschelhochman" (grayed out)
Clicking on "Systems Preferences/Sharing", it shows:
Computer Name: Herschel Hochman's iMac G5
Logging in from the PC, for "User Name", I can get connected using 1) 2) 3) of the variations above. I can even login if I leave the apostrophe off of the name???
==============================
As a side note,
On My PC, my username is "Herschel Hochman", Administrator.
If, from the above informtion, the Username on the Mac is "Herschel Hochman", the same as on the PC, it is strange that I have to log in from the PC.
==============================
I tried looking in the Help section, but I could not find a logical reason why Apple has to assign a "shortname"?
AND
Why does Apple give the Mac my name with the extension "iMac G5"? and then leave off the last letter, substituting "_s?
I don't know what all of these names are about. I understand that one cannot easily change these names without having to start all over again (whatever that means). Is there a way to simplfy all of this without affecting my ability to network the computers?
Thanks
Herschel

Actually most - but not all - of the names are easy to change.
Let's start with the one which isn't: your "short name." Without some complex UNIX voodoo in Terminal, that's your User account name and you're not able to change it. If you haven't spent much time setting up your account and importing data into it you could set up a new account, enter the short name you prefer, switch to it, and then delete your current account.
The name appended with "iMac G5" is your network ID name, and easily changed, as are the rest. Apple is simply trying to be helpful by putting a hardware ID tag in there for you - if you don't like it it's history. As for leaving off the "s" I believe that is simply truncation to maintain the best interoperability with older Macs and Windows systems - once again you can change it, but probably not make it any longer.
A true networking guru - which I am certainly NOT - may have more & better info for you. But as far as I know the short name is the only one you're stuck with. Hope this helps.

Ciscoworks Expert needed--RME show IP address instead of hostnames

Please take a look at the pics,
In RME and many other modules, it display the IP addresses , instead of the Hostnames as the ID for the devices(we want to use the hostnames for the devices). I saw the settings at Common Service/Global Setting was at IP(see the attach pictures). I then changed it into SysName and rediscover the devices. It didn’t work. It shows the same thing.
Anyone can advise me how to correct it?
thanks,
Han

it seems you are seeing the following 2 bugs:
CSCsq54877 for the resolver.pl and
CSCsv65933 for the problem that the device name does not get updated in DCR;
you have two options, contact TAC to get the patch or update to LMS 3.2
=======
CSCsq54877 Bug Details
resolver.pl may not properly resolve IP to hostname.
Symptom:
The resolver.pl tool may not properly resolve IP Address to hostname. This problem occur although the proper resolution path exists.
However, the resolver.pl tool properly resolves IP Address to hostname.
Conditions:
This occurs anytime when an IP address argument is passed to resolver.pl.
Workaround:
Use the nslookup or host command from the Operating System to get proper lookup results, if If the IP address has a PTR DNS record.
However, if the IP address is listed in the local hosts file, there is no workaround
CSCsv65933 Bug Details
Discovery does not update display name in DCR
Symptom:
The Device Credential Repository display name attribute is not updated after running Discovery despite the "Update DCR Display Name" box being checked.
Conditions:
This occurs for Common Services 3.2 Discovery.
Workaround:
To have the DCR display name reflect the correct value, the device must be manually edited under Common Services > Device and Credentials > Device Management

How can I get a default value to show the name instead of the ID.

I have a field with with a LOV that works great! It displays first & last name and returns the ID to the field.
The problem is the users want the first & last name to automatically default in the field without selecting from the LOV. However, I still need to store(return) the ID.
Also are application users username and passwords case sensitive?

Angie, Can you provide some more details.
This is a popup LOV correct? So the field in question is the source database column or is it static or what is it currently?
I am not sure if I understand your business rule of "automatically default in the field without selecting from the LOV" if that is the case why select from the LOV.
None the less try this.. Here is what I am assuming you would like: a value is set on a previous page or throughout yoru application when you arrive on page X a LOV is there that could have it's value derived from an item on a previous page.
So your LOV query should be like this
select a,b from your_table where foo = 'abc' OR :ITEM_VALUE_OF_LOV
make sure you add the "or clause" on your query otherwise the LOV will display the numerical value in the LOV and not the display value
If your LOV source column is a database value and you want to override it in essenece with your default value you can do something like this:
set a pl/sql process on load to:
select value into :P_ITEM_VALUE_OF_LOV from table;
or you could set your source used as "only when null" and set a default value within the element as well..

How do I get Messages to show contact names instead of phone numbers in notifications?

Originally, notifications from Messages.app would show the contact name sending the message. I'm not sure what caused it to stop, but now all notifications show up as the phone number of the contact. In the actual app, the names look fine. Is there some way to get contact names to show up again?

Hi,
Depending if you are using Buddy Lists or not then this setting is supposed to be fro the Budfdy lists but will effect the Main Window display
This item lower in the same View Menu is supposed to be the one fro the main Messages window (it has to be the "Front" window)
As you can see it also controls what Messages style is used.
7:54 pm Tuesday; June 24, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

#fix# - show your name instead of id in posts

FYI,
If you want your name to appear instead of some strange number next to your posts click the "forum settings" button on this page and make the change.

I want to add my name, but it is not possible after I clicked FORMM SETTING button. It assumes that you have your names available, then you may select the radio button. But the name field is empty, then no chance to do that.

Need to show vendor name on vendor contact workbench

Hello experts ,
We have a requirement where I need -
On the vendor workbench page, clearly show which company they are listed under.
Is there any way to do this ?
I guess this can be done with the help of token embedding into localized resource .
Any Suggestion is appreciable
Regards
Sudipta

Hi,
Check EKPA table for the Partner Roles in Purchasing DOC

Mail flag icons are missing, shows color name instead

I'm running Mail 8.0 on Yosemite. In "classic" mode the flag column shows the textual names of the flag color rather than flag icons in the appropriate color. In non-classic mode (or whatever you'd call it) the flag icons appear as expected. Is this a bug? Is there any way to get the flags to be displayed?
Example:
Thanks!

I was afraid this problem was some Apple UI person's absurd idea of making the interface better, like the horrible new Tags, and complaining, etc... but before posting I restarted Mail and the flags came back.
I love my Mac stuff but I must confess a month ago I set up Outlook (but I'm still resisting using it : ), because of so many Mail bugs in the past couple of OS updates. Problems with IMAP, with conversations bunching up unrelated messages, now flags disappearing... Tell me that someone is working on the bugs!

How to show full name of user in crystal report

Hi. I am using Crystal Report 2008. I need to show full name (first name and last name) of the user logged in. Currently I am using "currentceusername" but it shows the user id that a user uses to login.
Is there any way to show the full name of the user in crystal report?
Thanks in advance.

Hello,
Not you H4... Can I suggest if someone replies to actually add something of value!!!!
Cr does not have the ability to query your AD Server. What you would have to do is use a AD query tool or Export Option and export the user info from the log on ID into a Excel or an Access table or something CR could report off of. Then you can add a subreport to get the name from the ID and insert it into the main report.
Check with your IT department, they should have tools to get the info. I'm not sure if there is a DB connector that would allow you to query the AD server directly but if there is one and it supports ODBC then you can use that as your subreport Data connection.
Typically names do not change that often so rather than running the Query every time the report is generated it would be better to export the info to a text type file and simply use it for your report. IT can put a rule on to export if the Names change.
Thank you
Don

WLC log needs to show AP name instead of MAC

Similar Messages

Maybe you are looking for