Wlc loses user database after reload

The certificate on the Wireless Lan controller had expired.
I installed the certificate and restarted the controller.
The controller lost the entire user account database.
I imported the database from another system and after the reload the database was again lost.
Apart from this everything else works fine.
And there are also problems when restoring guest user accounts from Wireless Controll System, WCS the accounts are restored but not the passwords. Also we cannot set expiration date longer then 30 days, we have to set it unlimited first and then change it to limited.
Please let me know if anyone has come across this kind of an issue.

Hi,
I had a similar problem just a day ago:
A WLC4402-50 crashed and lost all of its database entries (Usernames, PSKs, MAC-Adresses,...). I don't know if it restarted and then crashed, or if it crashed and then restarted because of the crash.
The crash log contains this lines:
"Analysis of Failure:
Software was stopped for the following reason:
The system has encountered a fatal condition at mmc_system.c:2093"
Very strange behaviour. I would appreciate any comment, if i have to exchange the hardware or if i shouldn't take any action.
Regards,
Sebastian

Similar Messages

  • WLC loses user databse after reload

    The certificate on the Wireless Lan controller had expired.
    I installed the certificate and restarted the controller.
    The controller lost the entire user account database.
    I imported the database from another system and after the reload the database was again lost.
    Apart from this everything else works fine.
    And there are also problems when restoring guest user accounts from Wireless Controll System, WCS the accounts are restored but not the passwords. Also we cannot set expiration date longer then 30 days, we have to set it unlimited first and then change it to limited.
    Please let me know if anyone has come across this kind of an issue.

    Hi,
    I had a similar problem just a day ago:
    A WLC4402-50 crashed and lost all of its database entries (Usernames, PSKs, MAC-Adresses,...). I don't know if it restarted and then crashed, or if it crashed and then restarted because of the crash.
    The crash log contains this lines:
    "Analysis of Failure:
    Software was stopped for the following reason:
    The system has encountered a fatal condition at mmc_system.c:2093"
    Very strange behaviour. I would appreciate any comment, if i have to exchange the hardware or if i shouldn't take any action.
    Regards,
    Sebastian

  • WLC loses user account database after reload

    The certificate on the Wireless Lan controller had expired.
    I installed the certificate and restarted the controller.
    The controller lost the entire user account database.
    I imported the database from another system and after the reload the database was again lost.
    Apart from this everything else works fine.
    And there are also problems when restoring guest user accounts from Wireless Controll System, WCS the accounts are restored but not the passwords. Also we cannot set expiration date longer then 30 days, we have to set it unlimited first and then change it to limited.
    Please let me know if anyone has come across this kind of an issue.

    Hi,
    I had a similar problem just a day ago:
    A WLC4402-50 crashed and lost all of its database entries (Usernames, PSKs, MAC-Adresses,...). I don't know if it restarted and then crashed, or if it crashed and then restarted because of the crash.
    The crash log contains this lines:
    "Analysis of Failure:
    Software was stopped for the following reason:
    The system has encountered a fatal condition at mmc_system.c:2093"
    Very strange behaviour. I would appreciate any comment, if i have to exchange the hardware or if i shouldn't take any action.
    Regards,
    Sebastian

  • 820e error in user database after POA lock up on Friday..

    Have been able to use gwcheck and clean up other users who experienced this error, however one particular user is still not able to send or receive mail. I have her forwarding new mail to an alternate email address, her gw mail is being queued up. I have unloaded and restarted the POA a couple of times, and ran full gwcheck over the weekend. We are running GW 7.02, her account appears to be locked, and I am not sure how to unlock it. Would taking the email server down completely free it up? thanks! Mary

    Originally Posted by mspencer
    Have been able to use gwcheck and clean up other users who experienced this error, however one particular user is still not able to send or receive mail. I have her forwarding new mail to an alternate email address, her gw mail is being queued up. I have unloaded and restarted the POA a couple of times, and ran full gwcheck over the weekend. We are running GW 7.02, her account appears to be locked, and I am not sure how to unlock it. Would taking the email server down completely free it up? thanks! Mary
    Hi Mary,
    Which OS/patchlevel are you running GroupWise on? And how long have these issues been going on (as you mention other users).
    Mybe some other (non Groupwise process) is grabbing hold of the file, some more details on the server and what's running on it would be good.
    Cheers,
    Willem

  • MIGO BAdI or User-Exit - After Database Commit

    Hello,
    I'm looking for a BAdI or user-exit after database commit for MIGO posting. I want to create a FI document after MIGO posting.
    I already tried MB_MIGO_BADI BAdI but system gives a short dump. So I have to find a exit or BAdI after database commit.
    Thanks for helping in advance.
    Regards,
    Burak

    Hello,
    This issue solved.
    I used MB_DOCUMENT_BADI / MB_DOCUMENT_UPDATE and it solved my problem.
    FYI.
    Regards,
    Burak

  • How to recover my database after lose some archivelogs?

    How to recover my database after lose some archivelogs?
    What should I do next?
    When I make a point-in-time recovery, I get the following message:
    Oracle Error:
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01152: file 1 was not restored from a sufficiently old backup
    ORA-01110: data file 1: '/u01/app/oracle/oradata/rcatalog/system01.dbf'
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 09/25/2008 16:41:19
    RMAN-06053: unable to perform media recovery because of missing log
    RMAN-06025: no backup of log thread 1 seq 17 lowscn 798237 found to restore
    RMAN-06025: no backup of log thread 1 seq 16 lowscn 796977 found to restore
    RMAN-06025: no backup of log thread 1 seq 15 lowscn 781378 found to restore
    RMAN-06025: no backup of log thread 1 seq 14 lowscn 759019 found to restore
    RMAN-06025: no backup of log thread 1 seq 13 lowscn 709039 found to restore
    RMAN-06025: no backup of log thread 1 seq 12 lowscn 708479 found to restore
    RMAN-06025: no backup of log thread 1 seq 11 lowscn 676234 found to restore
    RMAN-06025: no backup of log thread 1 seq 10 lowscn 646686 found to restore
    RMAN-06025: no backup of log thread 1 seq 9 lowscn 645207 found to restore
    RMAN-06025: no backup of log thread 1 seq 8 lowscn 645199 found to restore
    RMAN-06025: no backup of log thread 1 seq 7 lowscn 595363 found to restore
    RMAN-06025: no backup of log thread 1 seq 6 lowscn 557197 found to restore
    RMAN-06025: no backup of log thread 1 seq 5 lowscn 519102 found to restore
    RMAN-06025: no backup of log thread 1 seq 4 lowscn 519053 found to restore
    RMAN-06025: no backup of log thread 1 seq 3 lowscn 492824 found to restore
    RMAN-06025: no backup of log thread 1 seq 2 lowscn 476888 found to restore

    Mixing thread
    yours recovery asking a lot of archivelog ,you are in the situation now like you are in no archive mode recovery..which requires last cold backup.
    What you can do is restore yours old backup with its old controlfile and then recover till before that miissing log by using recover database using backup controlfile.
    Khurram

  • Memory error after C042 errors on users database

    Hi,
    We recently have memory error messages on the POA and on the Client.
    The error seemed to follow several C042 errors:
    The database function 53 reported error [C042] on user4mn.db
    Error: Memory error. Memory function failure [8101] User:
    I cannot find any process that is accessing the user database at that time (GWcheck, Backup)
    The user also gets a memory error and has to restart the client.
    any ideas?

    On 9/7/2011 2:16 AM, pdjongh wrote:
    >
    > Hi,
    >
    > We recently have memory error messages on the POA and on the Client.
    > The error seemed to follow several C042 errors:
    > -The database function 53 reported error [C042] on user4mn.db
    > Error: Memory error. Memory function failure [8101] User:-
    >
    > I cannot find any process that is accessing the user database at that
    > time (GWcheck, Backup)
    > The user also gets a memory error and has to restart the client.
    >
    > any ideas?
    >
    >
    Have you run a full contents and structure check on the user?

  • 10000: PPPoE session recovery after reload

    Hi.
    We have seen that there are a feature that recover the PPPoE sessions closed in one side and up in the other. This feature is called 'PPPoE Session Recovery After Reload '.
    In the feature navigator, we can see that this feature is available for 7200 series. It seems not available for 10000.
    But in the release notes of Cisco IOS 12.3(7)XI3,
    http://www.cisco.com/en/US/partner/products/hw/routers/ps133/prod_release_note09186a008040929e.html
    appears this bug as resolved:
    CSCsa46626
    PPP PADT messages are not sent by a PPPoX PTA router to a client when the PPPoX user is no longer connected to the PPPoX PTA router.
    This feature is enabled only within the BBA Group configuration using:
    bba-group pppoe pppoe1
    sessions auto cleanup
    This issue can occur when a Cisco 10000 Series router is used as a PPPoX PTA router, and there has been a network flap causing the PPPoX users to lose their connections. PPPoE will experience this issue when BBA Groups are in use. VPDN Group configuration does not support this feature.
    There are no known workarounds.
    We have tested the IOS 12.3(7)XI6, but the router (10000) doesn't send the PADT (auto cleanup). In 7200, it works correctly.
    Anyone have has this problem?
    Anyone can confirm if this feature is supported?
    Regards.
    Jose

    Hi Jose ,
    I checked it using feature navigator and noticed that cisco 10000 doesn't support ""PPPoE Session Recovery After Reload"" feature.
    The following platforms support the feature.
    1700
    1800
    2600
    2800
    3200
    3600
    3700
    3800
    7200
    7301
    7400
    Thanks,
    satish

  • After reloading adobe creative suite cs3 on my mac 10.4.11 acrobat will not open any pdfs it previously opened. help!

    after reloading adobe creative suite cs3 on my mac 10.4.11 acrobat will not open any pdfs it previously opened. help!

    hello.   hey, thanks very much for writing back.  i got some good info with a search or two.  (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs,  OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
    what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
    from User /Preferences/Adobe:
    com.adobe.AdobePremierePro.plist
    com.Adobe.Premiere Pro.5.0.plist
    and from System Preferences:
    the file:  Adobe Premiere Pro Prefs
    and..
    /.../Premiere Pro/5.0/...
    AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
    Debug Database.txt
    Placeholder Preset.epr
    PostEncodeCmds.pref
    PresetCache.xml
    Trace Database.txt
    NOTE:
    of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but...  it seems to have worked.
    I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering,  so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
    hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
    happy editing,
    peace

  • When WLC authenticate users with secondary RADIUS server?

    Hi Sir,
    I'm configuring a WLC4404-100. One of the WLANs points to two RADIUS Servers for Authentication and Accounting (please see attached).
    I'd like to know, under what circumstances will the WLC authenticate users against the secondary RADIUS Server (in my case, the ACS with IP address 10.200.67.84)?
    Please advise.
    Thank you.
    B.Rgds,
    Lim TS

    Hi,
    I navigated to the following on the WLC:
    MANAGEMENT -> SNMP -> Trap Logs
    I noticed the following SNMP trap:
    Fri Dec 8 11:23:21 2006 No Radius Servers Are Responding
    I checked the 2nd ACS server, and true, at around the same time 11:23, the 2nd ACS server was authenticating users.
    I checked the 1st ACS server; at around the same time 11:23, there wasn't any service suspension or database replication going on. What's the cause of this WLC authenticating with the 2nd ACS server? The network is robust and I don't expect any latency issue. The two RADIUS servers are serving only wireless users, the number is about 120.
    On the WLC, I used the default of 2 seconds Retransmit Timeout for both the RADIUS Authentication Servers. Should I fine-tune it to higher value?
    Retransmit Timeout - Specify the time in seconds after which the RADIUS authentication request will timeout and a retransmission will be taken up by the controller. You can specify a value between 2 to 30 seconds.
    There are Passed Authentications logged on the 1st ACS server after during & after 11:23. So, I suspect the WLC is doing a kind of load-balancing across the two RADIUS servers.
    Please advise.
    Thank you.
    B.Rgds,
    Lim TS

  • How can I share a Tiger server's User database to a Panther server?

    I need some help to set this up. Keep in mind I do not have a DNS server.
    I have a Tiger server with Xserve and an older Panther server, both on the same local network. I have a whole bunch of users setup on the Tiger server. The Panther server does not have any users setup on it. I do not want to have to type in all the users all over again in the Panther server. What I'd like to be able to do is somehow share and syncronize the user database on the Tiger server with the Panther server.
    I looked into the Open Directory settings but I do not understand what to do. How do I configure the Tiger and Panther servers respectively so the Panther server can sync with the Tiger server's users database. Is this possible? It seems like it with Open Directory, one being the Open Directory Master and the other being the Open Directory Replica? But I just don't understand how to set this up. Also the Panther OD settings seem quite different than Tiger's in Open Directory.
    Any help would be appreciated.
    Message was edited by: robocub1

    Hi
    It may be best to set up your 10.4 Server as an Open Directory Master first and then use Directory Access on your 10.3 Server to connect to the Tiger Server so as it can use the same User Database. This should be possible. OD Master/Replica relationships are not possible if the OS versions are different, even if the Master was 10.4.11 and the Replica was 10.4.10. You have no chance when its 10.4 and 10.3.
    http://images.apple.com/server/macosx/docs/OpenDirectory_Adminv10.5.pdf
    The link is for 10.5 but the basics are the same. This is a recent post that describes how to set up an OD Master:
    http://discussions.apple.com/thread.jspa?threadID=1377046&tstart=0
    I'm guessing that your 10.4 Server is Standalone and is serving simple file services only (AFP and possibly SMB/Windows). If this is the case (and I can't see how it can't be) then your users will be in the local NetInfo node. This will be the default node that is presented to you in WorkGroup Manager. You always get a warning that your are working in an invisible node (if you have not disabled this) when working in the Server's local node. Don't worry there is nothing wrong with the warning. WorkGroup Manager on Panther (10.3) Server works the same way.
    You could if you wanted to simply export the Users and Groups from WGM in 10.4 and import them into WGM on 10.3. This should save you having to key them all in again. If the prospect of configuring internal DNS Services and all that goes with it seems to much for you then this is probably the simplest option. How do you do this? Launch WGM (its the same for both versions), select the Server Menu and select Export after first selecting desired users. Do the same for Groups. Use the same procedure in reverse. The Users and Groups files are not very big and can easily be transferred using a memory stick etc.
    There are differences between the two versions which are mostly to do with Server Admin. In 10.4 Server there are more services. One of the Services will be Open Directory. In 10.4 Open Directory will only show a green light by the side of the service if it is in any role other than Standalone. Server Admin on 10.3 Server will always show the green light by the side of the Open Directory Service. This does not mean that it is an OD Master, you have to click on Settings and inspect the Role to see what it actually is.
    You should be able to connect to a 10.3 Server with 10.4's Admin tools but don't be tempted to use Server Admin to configure/change anything on the 10.3 Server. You should not be able to go the other way 10.3 > 10.4 using the same tools.
    Internal DNS Services are a requirement for LDAP Services (and pretty much everything else) on Servers generally, although for simple file services not absolutely necessary. Internal DNS Services do not have to be configured on the Server itself just as long as they are configured on another server, for example, on the same network. If these are the only two servers on the network then you will have to configure DNS Services on either one or both of them depending on what you want.
    Not available on your 10.3 Server but is on your 10.4 Server are Access Control Lists (ACLs). This is a permissions model that is in addition to the standard POSIX permissions. Think carefully about how you provide permissions to your network clients if there is a mix of client OS, 10.3, 10.4 etc.
    Hope this helps, Tony

  • How do the application servers connect the new database after failing over from primary DB to standby DB

    How do the application servers connect the new database after failing over from primary DB to standby DB?
    We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
    When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround. 
    Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
    Oracle support provides us the answer as following:
    ==================================================================
    Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
    After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
    Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
    JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
    FAN server-side callouts can be configured on the database tier.
    FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
    =======================================================================================
    Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
    Thank very much in advance.

    Hi mesbeg,
    Thanks alot.
    For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
            <subsystem xmlns="urn:jboss:domain:datasources:1.0">
            <datasources>
                    <datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
                        <connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
                        <connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
                        <driver>oracle</driver>
                        <pool>
                            <min-pool-size>2</min-pool-size>
                            <max-pool-size>10</max-pool-size>
                            <prefill>true</prefill>
                        </pool>
                        <security>
                            <user-name>TEST_USER</user-name>
                            <password>Password1</password>
                        </security>
                        <validation>
                            <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
                            <validate-on-match>false</validate-on-match>
                            <background-validation>false</background-validation>
                            <use-fast-fail>false</use-fast-fail>
                            <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
                            <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
                        </validation>
                    </datasource>
                    <drivers>
                        <driver name="oracle" module="com.oracle.jdbc">
                            <xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
                        </driver>
                    </drivers>
                </datasources>
            </subsystem>
    If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed.

  • REP-0309: Unable to connect to the specified database after three attempts.

    Hi,
    I am getting the following error in cloned instance when I developed one custom report (rdf) and copied that report into custom top reports folder. and ran that report using custom responsbility.
    that report query is like this
    select user_name,user_id,start_date,end_date from fnd_user.
    simple report...
    ==========================
    Current system time is 30-JUL-2008 11:36:16
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    USERID='0'
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    /u01/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to: /u01/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    Enter Password:
    Enter Password:
    Enter Password:
    REP-0501: Unable to connect to the specified database.
    ORA-01017: invalid username/password; logon denied
    REP-0501: Unable to connect to the specified database.
    ORA-12154: TNS:could not resolve service name
    REP-0501: Unable to connect to the specified database.
    ORA-12154: TNS:could not resolve service name
    REP-0309: Unable to connect to the specified database after three attempts. Access denied.
    Report Builder: Release 6.0.8.25.0 - Production on Wed Jul 30 11:36:16 2008
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter Username: Enter Username:
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 779500.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 30-JUL-2008 11:36:17
    =========================================
    what might be the problem...
    I developed the report in 10g Report Builder. and moved to 1.5.10.2 instance... ran that report in my report builder using apps user and..it is running fine in my report builder.

    hi bsubbu
    your password of custom application user schema at database level should be similar with the password at application level
    for instance your custom application schema name and password is xxgis/xxgis , we register this schema at application site by this navigation
    security> oracle > register >database username (xxgis) > password (xxgis)
    here you might have change your custom application user's password at database level using
    alter user xxgis identified by newpassword;
    change this user password at application site also :
    security> oracle > register> database username (xxgis) > password (newpassword)
    i understand this from the document
    Regards
    Message was edited by:
    user608721

  • After reloading a website its page is not active.

    After reloading a website the page is not active. I have to click on a different program, minimize and restore, or click on the windows task bar and then things are able to be clicked on and pointer is recognized. All sites are affected
    == URL of affected sites ==
    http://ALL SITES
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

    Hi ,
    According to your description, my understanding is that you got an error when you clicked the link to a library.
    Whether you customize the library page.
    Please check Recycle Bin on your site, see whether there is the library in it. If yes, restore the library, then compare the result.
    If this issue still exists, please find more information about this issue in the logging file, the path is C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Why did some applications have to rebuild their database after a Time Machine rollback?

    Recently my system (10.8) got totally borked, so I booted into recovery mode and rewrote the entire disk from a two day old Time Machine backup. When I started back up, I found that:
    Spotlight needed to reindex the entire disk.
    Dropbox didn't recognize my computer, and after I logged back in it re-downloaded everything in my dropbox folder (even files that hadn't changed in the last two days).
    Microsoft Office needed to rebuild the user database before I could use Outlook.
    If my system was restored to the exact state it was in two days ago, why did all this happen? What made these applications behave differently from how they would have if I'd just left the computer off for two days?
    I'd also be interested if anyone could point me to a list of things that are lost, reset, or rebuilt after restoring from Time Machine. Many thanks.

    Recently my system (10.8) got totally borked, so I booted into recovery mode and rewrote the entire disk from a two day old Time Machine backup.
    If this is on your Apple Mac, you might like to ask in an Apple forum ??
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Maybe you are looking for