WLC - radius down, possible to have auth none as secondary?

Lets say i have a 5508 wlc and have configured a wlan with web-auth and radius authentication
The one and only configured radius server goes offline. In the event this should happen, is it possible to allow clients to connect anyway? auth none as secondary?
Appreciate any thoughts

Chris,
No, unfortunately not. Once you select 802.1X (Radius) you are bound to that security type. The controller will not allow NON EAP traffic on that WLAN unless it gets a EAP SUCCESS frame. The EAP success frame from the radius is sent to the WLC and it tell the WLC to open the controlled port to allow traffic to pass.
Top of my head alternatives:
You might consider another SSID with the same name with a OPEN security. Manually enable after failure of radius server
Create the user accounts on the WLC and allow the WLC to act as your radius server.If you have a large environment may not be realistic.

Similar Messages

Is it possible to have a non-Creative Cloud client review and comment on a shared album?

So far I have found that only those with an Adobe login can comment.

That's right. This area is pretty new and has changed quickly, so I wouldn't be surprised if it changes to allow other ways of authenticating comments.
For now, you can always set up a dummy account and tell people to log in using that user name and password. If you need more than one person to view a set of images, just duplicate the collection and sync it too (this doesn't mean extra uploading). So, for example, client John might log in using mydummyadobeID and select from the Shoot-John collection, and client David would use the same ID to view the Shoot-David collection.

Is it possible to have BW3.5 NON UC and ECC UC

We have to perform Unicode conversion as we have ECC5.0 NON UC and BW3.5 also NON UC(the final picture is of course ECC 6.0 and BI 7.0 or some latest).
Here I wander (as this are quite huge systems how to perform this.(I am afraid we will not be able to perform unicode conversion for productive ECC and BW at the same time).
With lack of experience I would kindly ask you is it possible to have BW3.5 NON UC and ECC UC(or oposite if necessary). I assume it is only metter of RFC connection (UC and NON UC but need approval)
Thank you a lot in advance

it is

Is it possible to have the new podcast down load to the bottom of the list so i can hear them in order. instead of flipping back and fort?

is it possible to have the new podcast down load to the bottom of the list so i can hear them in order. instead of flipping back and fort?

Yes. What I did was create a smart playlist for "Genre=Podcast" and "Plays=0" (don't use Media Type, then it won't syc). Order the playlist by the date of the podcast, and make sure your podcasts are set to skip when shuffle. Works like a charm.

HT4060 Is it possible to over charge an iPad/iPhone ie charge it regularly before battery runs down as I have heard that charging too frequently damages the battery life? Thanks

Is it possible to over-charge an iPad/iPhone ie charge it regularly before battery runs down as I have heard that charging too frequently damages the battery life? Thanks

No. That is not a problem for the battery.

Is it possible to have too many keyframes in one project in Premiere?

Hi all,
I'm using Premiere 6 on a Windows 7 ULT machine.
Is it possible to have too many keyframes in one project in Premiere?
I'm getting app crashes when I try to re-open a certain project in Premiere 6 and it seems that if that file has over 93 keyframes, then it will not re-open. But I can re-open that exact same project file with 93 keyframes in it, no problem.
But if I go any further and create any more keyframes than 93 in a new re-saved version of the exact same file, then that file will not re-open and I get an app crash... you can see screenshots of the two Windows app crash info panels below that I'm getting from three different bad Premiere project files that I've created so far.
I've tested and tested what is going on here and this seems to be what is causing the bad files. I've re-created the scenario and re-created files with over 93 keyframes from the same base project file that will still open... as soon as I get more than 93 keyframes in this file, then that newly saved file will not re-open after I close and try to re-open it.
This is 75 keyframes in one still image clip, 14 keyframes in another still image clip and 2 keyframes each in two other still image clips in a single project file... that is the limit... if I create any more keyframes in the clip that has 75 keyframes, the new file will save and render, but it won't re-open once it has been closed.
The two slightly different app crash info panels show, in the first one below,
"Fault Module Name: StackHash_e98d"
... and the second one shows,
"Fault Module Name: PREMINFO.dll"
... both messages with a little more different info in each one. I get either of the two error info panels when trying to re-open all three bad files that I've created with over 93 keyframes in them. That is, two of the files alternate between giveing "StackHash_e98d" and "PREMINFO.dll" when trying to open them and one of them always shows the "Fault Module Name: PREMINFO.dll" error.
So even the error messages are inconsistent with two of the bad files.
I've searched the internet for this error in association with Premiere and I've also searched on this forum and found nothing. Can anyone shed any light on this?
Thanks,
digi

Bill,
Even though I figured out a work around, I was still interested to know if these file opening crashes are related to Virtual Memory.
So on the topic of Virtual Memory... a few months ago I was troubleshooting a different problem in Premeire and I found this information...
"To improve performance in Premiere Pro, adjust the size of the paging file to a maximum of twice the amount of installed RAM."
Previous to that time three months ago or so, I had my Virtual Memory settings at the default automatic setting, but I tried setting my VM to twice the amount of installed RAM, and I've had it set that way ever since, just to make sure I'm optimizing the VM performance for Premiere and other apps.
But that isn't making any difference in this case. Today I also found information in a search that says to troubleshoot StackHash crashes, one should turn off "DEP" in the system settings for the application with the crash problem... according to the paragraph below, from the second post down by Chris on this tdistler.com page... http://tdistler.com/2009/04/10/stackhash-and-application-crashes-on-windows
Even though this was written in 2009 with Windows Vista in mind, many things for Vista work in Windows 7... it says,
"Here’s how 99 percent of Vista users can fix a StackHash failure. I’ll walk you through it step by step:
Method A:
1. Open your Start menu and click Control Panel
2. Browse to “System Maintenance” then “System”
3. In the left panel, select “Advanced System Settings” from the available links
4. You should now see the System Properties Window, which will have three sections. The top section is labeled “Performance” and has a “Settings” button. Click this button.
5. Select the “Data Execution Prevention” tab.
6. Select the option which reads “Turn on DEP for all programs and services except those I select”
7. Use the “Browse” button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
8. Click Apply or OK to commit your changes."
But I tried this and none of the three problem files that I encountered would open... I still got the StackHash_e98d or PREMINFO.dll crash errors.
So anyway, I'm a ways past that in my project now, just continuing with more keyframes over the number of 78 in separate but identical still image clips... that allows me to successfully work with this project with as many keyframes as I need.
Thanks again,
digi

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

Is it possible to have your whole family on one apple id or is it better to have each person have there own?
Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
If each has their own does each id have to buy their own music and apps?
Yes, all purchases are non-transferable.
How does find my iphone work with one apple id or two?
Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

In RoboHelp 11 Responsive HTML5, is it possible to have 2 different language outputs in one generated output file?

In RoboHelp 11 Responsive HTML5, is it possible to have 2 different language outputs in one generated output file, similar to WebHelp where the use can select the language from a drop-down list? In Webhelp output you could create multiple Content categories. Is there something similar with the responsive output, or am I forced to have a completely separate set of output files for each language (for example, English, Japanese, Chinese, Korean, and Arabic)?

As Rick, mentions, there's no default way.
Having said that, there's nothing stopping you from doing it yourself. You can add a kind of language selector to the layout and set that for every html5 output. With some JavaScript, you can have the user switch between your outputs. It would look like content categories, but you'll have build it yourself.

RE: DropLists in ArrayFields - is it possible to have adifferent sele

Richard;
Here you go....
newList : Array of ListElement = new;
{ add elements }
row : Integer = { get your row };
column : Integer = { get by name or just know the number }
// poof! Watch that down cast!
(DropList)(<arrayField>.BodyGrid.GetChildInCell(row,column)).SetElementList(
newList);
You can also change FieldWidget settings....
<arrayField>.BodyGrid.GetChildInCell(row,column).FillColor =
C_BLUE;
My array field doesn't scroll (lucky me!). See if the AfterFieldScrolled
event fires at the right time to recalculate the widget state. I haven't
played with it and I'm far from a Forte GUI guru, but I suspect that you are
altering the column template and the visible widget is separate from the
data. So as you scroll, the data would scroll but the new settings stay
put. That's not what I would want/need. The widget reflects something
about the data. When the data scrolls, so should the presentation
properties!
What may be needed is to somehow derive the presentation state settings
dynamically from the mapped data. So when the data scrolled, the dynamic
settings change on the new presentation row.
Let me know.....
Scott Irwin
-----Original Message-----
From: Richard Finegan [SMTP:[email protected]]
Sent: Monday, August 24, 1998 1:38 PM
To: 'Forte Users Mailing List'
Subject: DropLists in ArrayFields - is it possible to have a
different selection list per row?
I have a DropList in an ArrayField column. Is it possible to have a
different list of selections for each DropList in a different row?
(ex.
DropList #1 in row #1 can choose from a/b/c, whereas a DropList #2
in row
#2 can choose only from d/e/f, etc.) Technote 4996 seems to imply
that it
isn't possible, and everything I've tried so far has failed as well.
Any insight appreciated.
Richard Finegan
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

One way to do this is to get at the specific dropList widget in the
arrayField by calling the getChildInCell(Row,Column) method on
<..theArrayField..>.BodyGrid. This widget can then be assigned any
dropList you want. Depending on the uniqueness of the individual
dropLists, each data row specific dropList can be coded as an attribute
(array of ListElement) on the mapped class, which can then be assigned
to the dropList widget.
A code snippet to do this would be -
method refreshArray
begin
for displayRow in 1 to <myArrayField>.VisibleRows do
dataRow : integer = displayRow + <myArrayField>.TopRow - 1;
myDropListWidget : dropList =
dropList(<myArrayField>.BodyGrid.getChildInCell(displayRow,
<..columnNumOfDropList..>));
myDropListWidget.setElementList(myArrayField[dataRow].myElementList);
end for;
end method;
This method has be called only when the user scrolls the arrayField, as
in -
when <myArrayField>.AfterFieldScrolled do
refreshArray();
Hope this helps.
Prashant.
From: Richard Finegan[SMTP:[email protected]]
Reply To: Richard Finegan
Sent: Monday, August 24, 1998 11:38 AM
To: 'Forte Users Mailing List'
Subject: DropLists in ArrayFields - is it possible to have a
different selection list per row?
I have a DropList in an ArrayField column. Is it possible to have a
different list of selections for each DropList in a different row?
(ex.
DropList #1 in row #1 can choose from a/b/c, whereas a DropList #2 in
row
#2 can choose only from d/e/f, etc.) Technote 4996 seems to imply
that it
isn't possible, and everything I've tried so far has failed as well.
Any insight appreciated.
Richard Finegan
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

My I Mac has a pink cloud in part of the grey top bar and also if I leave it with safari or mail open when I come back to it it has closed these down and I have to re open

My I Mac has developed a pink cloud in part of the grey top bar and also if I leave for awhile with Safari or anything else left on when I return it has closed these down and I have to re open them, has anybody got any ideas how to cure these problems if possible.

For FaceTime try the troubleshooting advice given here:
http://support.apple.com/kb/ts3367
Also try resetting your iPad:
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

I have a MacBook Air w/ 64 GB. I have hours and hours of music/vids/etc. Is it possible to have an external drive specifically set-up for my iTunes? If so, what do I need to do? Thanks!

I have a MacBook Air w/ 64 GB. I have hours and hours of music/vids/etc. Is it possible to have an external drive specifically set-up for my iTunes? If so, what do I need to do? Thanks!

Yes, many people do just that. Copy your iTunes folder to the external drive. Once done, open iTunes with Option held down and select the new location of the library file.

WHY does the finder insist on rearranging the files in a folder in alphabetical order even when I have selected "none" in the preferences for file organization?

WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred order, it will still displace them occasionally. This is becoming increasingly frustrating!
Is this a "Pages" issue or "FInder"? The vast majority of documents I use are in Pages, but there are also Numbers, PDFs, jpegs and a few other applications involved. This never happened before I upgraded to Mountain Lion; in Tiger, the documents (mostly Appleworks) and files stayed where I wanted them to be.
I am visually oriented, and prefer to arrange items in a folder in an order that makes them easier for me to access, which is often NOT alphabetical.
Can anyone suggest a solution? Please??
Thank you.
Sara

nbar,
Thank you for your reply.
However, I do not understand what you mean by "user account." I am the only user, and can find no options for "user" or "guest." The parental controls have always been off, as there are no other people who have access to my computer.
Frank,
Thank you for your reply.
All my documents, files and folders are in icon view, Arranged By: none in both view and view options. This arbitrary rearranging does not happen all the time, only when I make a substantial change to one of the documents in the file or folder. I'm not sure what you mean by "column heading."
MichaelLAX,
Thank you for your reply.
I know, to my sorrow, that Appleworks does not work with Mountain Lion. I spent at least three months converting approximately 2,000 Appleworks documents to Pages, Numbers, Bento (for databases) and Touchdraw (for drawings). So this is not the problem; but as I said, I did not have this rearranging problem with Appleworks - the icons stayed where I wanted them to be. I still miss the ease and reliability of Appleworks, darn it!
Frank,
Thank you for your second reply.
I do have the Sort By: in view options as well as in view set to "none." The finder still insists on rearranging, but only when I have made a substantial change to a document in that file or folder.
Any futher thoughts?
xdab,
Thank you for your reply.
"Are you are using icon view, but for some reason the finder moves files around? is that the problem?"
YES!! This is exactly the problem.
"If this operation is successful then erase the original and rename the new one to the name originally chosen by the user."
This seems like a lot of trouble, especially as I often work on several documents at the same time.
"By the way, the finder has a "clean up by" menu that rearranges icons in one of the standard orders, there are shortcuts that produce the same effect, for example <option><cmd>1 sorts them by name. Is it possible that this shortcut was typed by mistake without you noticing?"
I do know about this "clean up by" option, and avoid it like the plague! So I doubt this is the issue, and I infrequently use keyboard shortcuts like this anyway.
Thanks all who replied. None of the suggestions seem to work, however. Any others out there?
Regards,
Sara

I have a non contract iphone4 bought from Apple U.S. store and need to travel to India - how can I use this in India? Can apple unlock it for me so I can put in my own SIM there?

I have a non contract iphone4 that I bought from an Apple Store in the U.S. and now am travelling to India - can apple factory unlock it so I can use it in India with a local SIM card?
Please advise.

WE are not all computer geeks, And the phone companies are trying to run a monopoly.
I think forums like this are great places to inform people who need it.
I have heard horror stories from my family of $85/month iPhone contracts and locked phone.
Let help all of us and discuss how to get unlocked phones and cheaper contracts.
Ok so you say factory unlocked phones are possible in Us. Is that through Apple only?
At&T and verizon dont unlock? Is they any consumer advocacy legislation that would force them? In Uk when they opened to 4 companies (now 6 here) they forced companies to unlock.

I could previously open my itunes program on my computer. Not now as when it asks, Do you want to allow this program to make changes to your computer and I select, Yes, it shuts down. I have removed and re-installed itunes, checked firewall. Pls help

I could previously open my itunes program on my computer and sync with ipad, ipod and iphone but no longer. When I select itunes a dialogue box opens with question - "Do you want to allow this program to make changes to your computer" When I select YES, it just shuts down. I have removed and reinstalled itunes. have checked firewall and spent hours trying to fix. Please help.

A possible cause of this error is that Firefox is set to run as Administrator.
Check that Firefox isn't set to run as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
* Privilege Level: "Run this program as Administrator" should not be selected
* "Run this program in compatibility mode for:" should not be selected
Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\).

Is it possible to have dual boot Tiger & Snow Leopard?

I currently use Tiger. I have one important (and expensive) piece of unsupported software that I don't need too frequently. Does anyone know if it's possible to have a 'Boot Camp' type setup with the option to boot in either OS? I don't want to be 2 versions out of date but I can't do without the unsupported software altogether.

My macbook only had an 80gb hd so after 2 years, I installed a 500 specifically for the coming of SL. With that in mind, I partitioned it in 2 beforehand.
Although I've never done it ( theres a lot about OSX I don't know about being that I jumped from 12 year old macs to OSX recently) but as the other person said, you can go ahead and make a partition.
Its just that when you put in the SL install disk, you'll need to go to utilities first and open disk utilities to create another partition. I don't know the exact instructions on that since I've just made partitions on a fresh drive.
Although I'm not sure if its necessary or not since you already have a system, what I did anyway was to boot from the SL install disk. You do that by inserting it and restarting while holding down the 'C' key. It'll take a while to boot from the disk.
As far as what do do with the install, it couldn't be simpler. Obviously you've already gone ahead and cloned your current system.
Once you have your second partition set up simply click install on the SL splash screen. After it does its thing it'll ask whether you want to migrate anything over from another volume or computer, etc.
It'll have some checkboxes for your 'old' home folder, applications and settings/network.
They all have a drop down menus for further refinement of what you want to migrate...except applications, I think...its all or nothing.
After you're all done, restart and it should boot from SL first. *Verify and repair permissions*
One thing I noticed was that my mac hd's didn't appear on the desktop. So I went and looked in the finder prefs and it has a checkbox to make them appear...which I did, and they showed up.
Thats about it.

WLC - radius down, possible to have auth none as secondary?

Similar Messages

Maybe you are looking for