WLC Release OS and AP-SSO

Hello to all,
Which Release OS you suggest migrating from 7.0???
I've seen that 7.4 is quite an unpredictable Release with major problem so I'm evaluating 7.3 or 7.5...
Regarding AP SSO If I wanto to keep the Redundancy model of 7.0 without AP-SSO I'm still able to doi also if I upgrade to 7.5?
Or I have to migrate from the Actual Redundancy 1:1 using Mobility Groups to AP-SSO reconfiguring both Primary, as Master, and Secondary as Standby
Thnx for the suggestion
BR
O.G.

I didn't have the guts to test HA SSO on 7.4.100.X and 7.4.110.X, however, I am currently using 7.5.X.X in production. We would regularly (as in once a month) do failover in the middle of the day and no one would see any impact.
Why do we initiate a failover? Because we can. No joke, because we can. Really!

Similar Messages

Does WLC release 7.6 support internal DHCP when AP and client SSO is configured?

Hi,
I currently have 5508 WLCs running on release 7.6 and they are to be configured in 1:1 HA mode. Would like to know if internal DHCP is supported if AP and client SSO is to be configured.
Thanks in advance.

Unfortunately, till date no AirOS release supports Internal DHCP when AP SSO is configured.
For details, check HA Deployment Guide. It says following :
"Internal DHCP is not supported when SSO is enabled."
-Thanks
Vinod

WLPS/WLCS 3.5 and Campaign Mananger 1.1 Ships!

All,
We recently put WLPS and WLCS 3.5 on the web. These new releases add new
features and run on WLS 6.0 allowing you to use new WLS features, such as
two-phase commit across different databases.
http://www.bea.com/products/weblogic/commerce/whatsnew.shtml
In addition we have completed a new product offering - the Campaign Manager.
Campaign Manager is a Swing application that allows business users to create
targeted, personalized campaigns for sites running WLPS or WLCS. You can
define discounts, send emails, select personalized content, track
advertisements, perform dynamic user segmentation etc. etc.
http://www.bea.com/products/weblogic/campaign/index.shtml
All without a single line of Java or JSP code. Just start up the WLPS or
WLCS templates, boot-up the Campaign Manager and start clicking!
There cool! Check 'em out - you can download all three here:
http://commerce.beasys.com/downloads/commerce_servers.jsp#wlcs
Sincerely,
Daniel Selman

We were using WLCS 3.2 and WLS 5.1 SP8 so far, we got a patch
(patch_CR043462) from BEA in response to some bugs we reported ( BEA Support
Case: 222714). This patch had some new classes (e.g.
CommerceInputProcessorExtended, PipelineSessionExtended) and to use them we
changed the code. The site is live now. I'm now trying to find the
effort/feasibility of migrating to WLS 6 and WLCS3.5. But during the
migration I found that the above patch is not shipped with WLCS 3.5. So my
question is, can we use the old patch given to us with WLCS 3.5 or shouldn't
it be part of the new WLCS 3.5 release ? What BEA suggests about this.
Regards,
Ajay Upadhyaya
"Daniel Selman" <[email protected]> wrote in message
news:3adf2542$[email protected]..
All,
We recently put WLPS and WLCS 3.5 on the web. These new releases add new
features and run on WLS 6.0 allowing you to use new WLS features, such as
two-phase commit across different databases.
http://www.bea.com/products/weblogic/commerce/whatsnew.shtml
In addition we have completed a new product offering - the CampaignManager.
Campaign Manager is a Swing application that allows business users tocreate
targeted, personalized campaigns for sites running WLPS or WLCS. You can
define discounts, send emails, select personalized content, track
advertisements, perform dynamic user segmentation etc. etc.
http://www.bea.com/products/weblogic/campaign/index.shtml
All without a single line of Java or JSP code. Just start up the WLPS or
WLCS templates, boot-up the Campaign Manager and start clicking!
There cool! Check 'em out - you can download all three here:
http://commerce.beasys.com/downloads/commerce_servers.jsp#wlcs
Sincerely,
Daniel Selman

Oracle Designer6i Release 4 and Oracle9i Unable to add user to Repository

Dear all,
I am currently using Oracle9i with Oracle Designer6i Release 4. Before I am able to use both Release 4 and Release 2 with Oracle9i. However, this time when I install it after a cleanup in my server. I have received the following error message when allowing a user to use repository using RAU:
Message
RME-00020: Internal API error - ORA-00600: internal error code, arguments: [25012], [2147483647], [0], [], [], [], [], []
RME-00011: Operation 'close' on ACTIVITY has failed
RME-00222: Failed to dispatch operation to Repository
RME-00224: Failed to close activity
Please help. Thank you.
Philip

Hi
I had exactly the same error and managed to get rid of it by deinstalling and reinstalling the client and the server with the patch (2083057) from metalink (I had previously used this patch for upgrade). There was no problem with user creation.
However, I get the same error when I try to do anything with the repository, such as, create an object. So, this is really of no help. Sorry.
Have you managed to get the installation going????
Is there anyone who has Designer 6i functioning (even partially) with Oracle 9i on a windows platform, or for that matter any platform??
Anita Srivastava

Release date and release no of Scheduling Agreement

Hi All,
I have a problem with Scheduling agreement.
I have created a scheduling agreement with long validity period.
I maintained delivery schedules within that validity period.
I have generated forecast schedules. then using ME84, creating a releases.
the problem is occurs here.
it was not updating the release no and release date for the schedule line.
still it is showing a *yellow light* .
where is the problem and why it was not updating.
and can u please explain the process and significance of those lights.
Thanks in Advance.
Regards
Kishore

Verify the table T161M has the values
kvewe = 'B'
kappl = 'EL'
druvo = 1
kschl = LHPA
as mentioned in the code.
The solution is add in SPAD the

Purchase Order Release Strategy and SAP user RelationShip

Hi,
We are currently developing a work flow to streamline PO release in our company . What we want to achieve is that
E.g
A purchase order 100001 is creates and a release strategy s1 is applied to it which is a 3 level relase statrgy having release code c1,c2,c3 which are uniquely assigned to user/employee of the company and no 2 users'employee can have the same release code.
Now when c1 release the purchase order a work item should be created to for the user/employee who is assigned the c2 code.
Currently this workflow is not implemented in our company adn the relase stategy is handeled by authorization oobjects and when ever a po user relase the po he calls up the other persona next in relase strategy to notify him about the work he has to do .
I am need to know can we develop a relationship b/w the release code and sap user or employee
Regards
Kamran ellahi

Hi,
We are currently developing a work flow to streamline PO release in our company . What we want to achieve is that
E.g
A purchase order 100001 is creates and a release strategy s1 is applied to it which is a 3 level relase statrgy having release code c1,c2,c3 which are uniquely assigned to user/employee of the company and no 2 users'employee can have the same release code.
Now when c1 release the purchase order a work item should be created to for the user/employee who is assigned the c2 code.
Currently this workflow is not implemented in our company adn the relase stategy is handeled by authorization oobjects and when ever a po user relase the po he calls up the other persona next in relase strategy to notify him about the work he has to do .
I am need to know can we develop a relationship b/w the release code and sap user or employee
Regards
Kamran ellahi

Class and release group and code in release strategy??

hi experts ,
Can some body explain me..
I have created Characteristics and Class for for release strategy.
But while creating release group , i should assign my class with release group , after doing this when i save , its giving error as check the release classes????
I m using the same class what i have created for my company..
So how to over come this issue
Thanks

Release Prerequisites
Definition
The release prerequisites indicate the sequence in which a purchase requisition or an external purchasing document must be approved via the release codes. The release prerequisites are defined in the Purchasing Customizing facility (in the release strategy).
The approval procedure for purchase requisitions in an enterprise may be set up in such a way that a department manager must approve a requisition item before the next level of authority (e.g. the cost center manager). In this case, approval by the department manager is a prerequisite for approval by the cost center manager.
Release Indicator
Definition
When a requisition or an external purchasing document has been processed via a release code, a release indicator is assigned to it.
When the system sets which release indicator is defined in the Customizing facility for Purchasing (in the release strategy via the release statuses).
What does the release indicator determine?
Requisitions...
External purchasing documents....
Whether the item may be changed by Purchasing or Materials Planning and Control after the start of the release procedure
Whether a new strategy is determined and whether existing releases must be cancelled in the event of changes
Whether an RFQ or a PO may be created with reference to the item
Whether the document may be changed by Purchasing after the start of the release procedure
Whether a new strategy is determined and whether existing releases must be cancelled in the event of changes
Whether the purchasing document is released for transmission
Alternative Release
Definition
Within the release sequence, you can define alternatives. This means that several employees can effect release (signify approval) at a certain point in the sequence. If just one of these employees has effected release, the next release status is reached. The other employees thus need take no action.
Five release codes are defined for purchase requisitions in an ascending hierarchy. The requisition item can be converted into either an RFQ or a PO if release has been effected either with the release codes 01, 02, 03 and 04 or - alternatively - with release code 05.
The box with the information on the release strategy also offers you the possible alternatives for selection (see Displaying Release Information).
An alternative release cannot be a prerequisite for the next release code. In the above example, the releases with codes 01, 02, 03 and 04 could not be prerequisites for release with 05.
Release w. Classification (PReqs./Ext. Pur. Docs.)
Use
The aim of this procedure is to replace manual written authorization procedures using signatures by an electronic one, while maintaining the dual control principle.
The person responsible processes the requisition or other purchasing document in the system, thereby marking it with an "electronic signature" which can give the document legal force.
This release procedure can be used to approve requisitions and the external purchasing documents RFQ, PO, contract, scheduling agreement, and service entry sheet.
Purchase requisitions are released either at item level or in total. There is no provision for item-wise release (i.e. partial approval) in the case of the external purchasing documents. The latter can only be released in their entirety.
If you set up the release procedure with classification for purchase requisitions, the procedure without classification is deactivated.
Prerequisites
The release procedure with classification must have been set up in Customizing for Purchasing. In addition, a class with characteristics must have been created for each document (requisition, purchase order, etc.).
If you wish to set up both the overall release procedure and the item-wise procedure for requisitions, you must create one class for each procedure.
How to do this is outlined in the Implementation Guide (IMG) for Purchasing in Define Release Procedure for the relevant documents and in Set Up Release Procedure with Classification for purchase requisitions. You will find detailed information on classification in the R/3 Library in the documentation CA Characteristics and CA The Classification System.
This procedure offers a wide range of possible combinations of release criteria. Should you nevertheless have other requirements, use the enhancement provided by SAP.
Operation of Release Procedure w. Classification
The characteristic values from a requisition or external purchasing document are passed on to the classification system.
The system checks whether the values correspond with release conditions. If so, it assigns a release strategy.
The persons responsible for the release codes process the document in the sequence defined in the release strategy.

Deletion of Release Group and Code in PO

Dear Consultant,
In Purchase order, we have created some release group and code, Unfortunately we deleted some groups Without deleting in Order wise.
In table level the Release Group is there but in SPRO Release Strategy settings its not there..My consultant advised again you have to create same release group in Release strategy...
If I create same Release Group which are lying in my T16FC Table..But system throwing this err "An entry already exists with the same key"
Could you suggest me.
Regards,
PRIYA.

Hi,
Please go with below mention path: -
SPRO >> Materials Management >> Purchase Order >> Release Procedure for Purchase Orders >> Define Release Procedure for Purchase Orders >> Release Groups.
Here check release group is existing, if yes then remove them and click on save button.
Then try to create new service group.
Some times we delete release group and create new release group with same description without saving changes.Due to this this type of error is occur.
Regards,

Please help me to configure 2504 WLC as secondary in N+1 HA mode. My primary WLC is 5508 and both have 50 AP license.

Please help me to configure 2504 WLC as secondary in N+1 HA mode. My primary WLC is 5508 and both have 50 AP license. I want to deploy the AP in the same location.

Go HERE: https://supportforums.cisco.com/discussion/12219106/high-availibility-2500

I would like a Question About Flexconnect HA N+1 After WLC 1 Down and AP go to Joint WLC 2

Hi everyone
I would like a Question About Flexconnect HA N+1 After WLC 1 Down and AP go to Joint WLC 2
-Cisco WLC 8500 = 2 unit version 7.6.130.10
-Mode Flexconnect HA N+1
-AP Joint WLC 1 and 2 mode HA N+1
I would like After WLC 1 Down is AP Go to joint WLC 2 Client associate in AP can use DATA Traffic between AP Failover ??
I think Mode Flexconnect client can use data traffic if WLC 1 , 2 Down becasuse Mode flex data traffic not go to WLC ??
I think true ??
thank you

Hello
You should try a flexconnect deployment
combined with locally switched SSIDs, which
should comply with your requirements.
fp

Release Management and Dsc - How to queue a build when a release is in progress?

I have VSO and Release Management 2013.4 working and deploying to Azure vm's via DSC
The build profile is set to trigger on commit to the Git repo and the release template is set to be triggered on successful build from TFS
However if a developer commits in quick succession the resultant builds cause releases to overlap in RM? - this causes some of the releases to fail with a DSC error ("the consistency check or pull cmdlet is in progress....")
Is there a way to force RM to prevent concurrent releases? (based on the same release template and build profile)

Thats correct - in this instance its VSO as source control and using the hosted release management to attempt to deploy to azure vms
And yes build takes about 5 minutes but the release template can take up to 15 minutes to run - this means that a second build can cause the same release template to run again (its set to trigger on build)
Error log from RM
xception Message: New deployment is not allowed as an another deployment is in progress. Retry the deployment after sometime. (type OperationFailedException)
Exception Stack Trace: at Microsoft.TeamFoundation.Release.EnvironmentProvider.Azure.Implementation.AzureDeploymentProvider.ReadDeploymentResponse(DeploymentResponse response)
at Microsoft.TeamFoundation.Release.EnvironmentProvider.Azure.Implementation.AzureDeploymentProvider.DownloadBuilds(DeploymentMachineSpecification deploymentMachineSpecification, AzureStorageSpecification azureStorageSpecification)
at Microsoft.TeamFoundation.Release.EnvironmentProvider.Azure.Implementation.AzureDeploymentProvider.RunScript(String scriptPath, String configurationPath, MachineSpecification machine, StorageSpecification storage, Dictionary`2 configurationVariables)
at Microsoft.TeamFoundation.Release.Tasks.DeployDsc.Execute(DscComponentParametersV2 dscComponentParameters, AzureStorage azureStorage, String[] dnsNameAndUpdatedWinRmPort, String userName, String password, String dscScriptPath, String dscConfigurationPath, Boolean skipCACheck)
at Microsoft.TeamFoundation.Release.Automation.Tasks.DeployDscTask.DscExecute(DscComponentParametersV2 dscComponentParameters, AzureStorage azureStorage, String[] dnsNameAndUpdatedWinRmPort, String userName, String password, String dscScriptPath, String dscConfigurationPath, Boolean skipCACheck)
at Microsoft.TeamFoundation.Release.Automation.Tasks.DeployDscTask.DscDeploy(AzureStorage azureStorage, DscComponentParametersV2 dscComponentParameters, String userName, String password, String dscScriptPath, String dscConfigurationPath, String skipCACheck)
at Microsoft.TeamFoundation.Release.Automation.Tasks.DeployDscTask.Execute(IAutomationContext context)
at Microsoft.TeamFoundation.Release.DistributedTask.TaskProcessor.TaskExecutor.Execute(TaskExecutionContext context)

I preordered the One Direction FOUR album deluxe and they have been releasing songs and itunes says i need to purchase them

i preordered the One Direction FOUR album deluxe and they have been releasing songs and itunes says i need to purchase them

The standard process for pre-orders is that you're not charged at the time, but as and when individual tracks are released these are charged at the standard single rate and when the full album is released you pay the balance between what you've paid so far and the full album price.
Has your previous payment method expired or been removed since you registered the pre-order?
tt2

Oracle 9i Release 2 and XML

Can you help me about Oracle 9i Release 2 and XML? I cannot register my schema file.
Moreover, I don't know how do I create a table of XMLTYPE??
Thanks for Helps.

The documents listed in the following page could be a good start point:
http://otn.oracle.com/tech/xml/doc.html

Differences beetwen Oracle AS 10g Release 2 and Release 3

Hi
Could you give me links or just write about differences between Oracle AS 10g Release 2 and Release 3. I have books to Oracle 10g AS Release 2, and I don't know, what information are incorrect with reference to Release 3. I've found this link http://download.oracle.com/docs/cd/B32110_01/core.1013/b32196/whatsnew.htm#sthref7 , but Oracle 10g AS Release 3 for example does not require a metadata repository. So where can I find all diferences?
Thanks awfully for help.
Regards

Application Server 10R2 (10.1.2.0.2) includes products such as OID, Forms & Reports, Discoverer, Oracle Portal etc. These are not included in Application Server 10R3, which was a JEE only install geared towards JEE solutions.
Both versions will be desupported in December 2011 so I would spend to much time on these versions. Go with Fusion Middleware 11g : http://download.oracle.com/docs/cd/E21764_01/index.htm
Thanks,
EJ

Crystal Reports XI Release 2 and Service Pack 2 upgradation

Hi,
I need your support to upgrade and migrate to Crystal Reports XI Release 2 and Service Pack 2 in my development server.
I am currently upgrading my Crystal enterprise version 9 with the Crystal Reports XI Release 2 and Service Pack 2. I have the below questions to be clarified. Appreciate if you can reply me ASAP. Thanks.
My Environment:
O/S - Windows Server 2003 Standard Edition; Version 5.2 (Build 3790); Service Pack - 1
RAM size - 1 GB
Installed software - Crystal enterprise 9
1) After successfully upgraded with the XI version, all my current user accounts and existing reports are not available in the upgraded version. Pl. suggest me, how to migrate my existing connections and all the existing reports?
2) In my server, SQL Server is not installed. But SQL Server instance (SQL Server 7.00.623) is running in my taskbar (desktop). If I stopped the SQL Server instance, the "Crystal APS" in the Crystal Configuration Manager is stopped. What information is stored in the SQL Server?
3) What is the default SQL server version bundled with Crystal Reports XI Release 2 Service Pack 2? What is the SQL server version you recommand?
4) Will the Crystal Reports XI Release 2 SP2 supports the SQL Server 7.00.623?
Regards
Sanrajesh

Hello, Sanrajesh,
You have been using Crystal Enterprise 9.0 and now you are installing Crystal Reports XI R2. Is that correct?
Crystal Reports XI R2 is just the Crystal Reports designer and runtime for development.
Crystal Reports XI R2 does not have the functionality of Crystal Enterprise. The upgrade would be Crystal Enterprise 9.0 to Business Objects Enterprise XI R2. (11.5)
A full BusinessObjects Enterprise installation will install the appropriate MS SQL Server for it's own use.
Will this be the Enterprise server or just the Development system to create an application connecting to your BusinessObjects Enterprise server?
What development language will you be programming in?
If you have BusinessObjects Enterprise installed elsewhere you only need the appropriate development components on your system and connect to the server in code.
Our BusinessEnterprise Support team would assist you in the upgrade from Crystal Enterprise 9 to Business Objects Enterprise XI R2 if that was your plan.
Then we could discuss the development requirements.
Elaine

WLC Release OS and AP-SSO

Similar Messages

Maybe you are looking for