WLC Warning Message: Our AP is under attack

Hi there,
I receive this Warning message in WLC version 5.0:
Warning: Our AP with Base Radio MAC 00:1f:6d:b9:48:d0 is under attack (contained) by another AP on radio type 802.11b/g
So, what does it means? Can someone explain..Great Thanks.

I am getting the same message, but I've not been able to diagnose the issue yet.
It seems that the AP is being contained by another wireless system. However, there is no information that I can find to indicate what is "attacking" or "containing" the AP.

Similar Messages

  • IDOC Failure due to warning message

    Dear Members,
    When we pass data from MDM to ECC through XI, most of the times the IDOC fails, the reason we found out is the warning message that we get when we create vendor manually from XK, FK transaction codes.
    Warning message that we get in XK & FX transaction codes are :
    EX: Are you sure you want to map the following customer to the vendor.
    Because of above warning message the IDOC's are failing.
    As we cannot disable those messages, can we do anything else; mostly at IDOC side to avoid those warnings and to successfully post the IDOC.
    Cheers,
    Cherry.

    Hi Chen,
    The message I get at IDOC
    Status 68 :  Error No further processing  &
    Status 51 : Application document not posted.
    WARNING message which I get under XK03 transaction --> change, when I try to modify the customer is:
    Customer xxxxxxx is currently not referenced and will be updated accordingly
    Other details
    Message no. F2293
    Application Area f2
    Message number 293
    Main program  SAPMF02K
    Include MF02KI00
    Cheers,
    Cherry.

  • WLC sending a message of AP under attack

    Hi to all,
    I've been getting this message from my WLC and I'm not able to find what doest it really mean and if there is something that could be done in order to solve it.
    "Warning : Our AP with Base Radio MAC 00:14:a8:53:0b:20 is under attack (contained) by another AP on radio type 802.11b/g"
    "Warning Cleared: Our AP with Base Radio MAC 00:14:a8:53:0b:20 is no longer under attack (contained) by another AP on radio type 802.11b/g"
    Can this cause me problems in the performance of my wireless network???
    Thanks in advance for your help.

    Hi,
    The firmware is 4.2.112.0
    Thanks in advance for your help.

  • Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

    Hi,
    I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
    Has any other user had such a problem, and if so, how did they rectify it.
    Any advice would be greatly appreciated.
    Thanks in advance.
    clarinet99

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • BADI/user exit for ME21N - Warning message for "our reference" field

    Dear all,
    I have a problem.
    In ME21N, I need to show a warning message (message w... ) when user enter an already-used-before input in "Our reference' field (EKKO-UNSEZ).
    I've tried in two methods.
    1. Using fm EXIT_SAPMM06E_004. But it can only works for Error message. My warning message never shows up.
    2. Tried to implement classic BADI ME_PROCESS_PO_CUST, using the PROCESS_HEADER method. Got the break-point spot on, but still didn't show the warning message.
    Why is my warning message always got override?
    Please advise.
    Thanks in advance
    Ahmad

    Hi Ahmad,
    Check the below links:
    Unable to put Warning messages in ME21N and ME22N in Exit / BAdI in ECC 6.0
    Warning message in me22n check user-exit can't process?
    Custome warning message in T. code me51n me52n & me21n , me22n
    Regards,
    Nisha Vengal.

  • I got no buttom for "warning message" under security tab. /Stefan

    Hallo!
    I got no button for -warning message- under Security in Firefox 35.0.1

    hi stefan, i think i don't fully understand the question yet. can you explain in a little bit more detail what you're trying to achieve in the first place?

  • WLC HA Warning Message

    Where exactly is the license warning message seen when a secondary controller is active for over 90 days?  I've seen a CLI example but is it seen elsewhere such as the web GUI or through SNMP traps?  Could the user (Wi-Fi station) experience this message too if using something like webauth?  I'm certifying this feature and want to provide proper expectations for operations but don't have the luxery of 91 days to trigger it. 

    I don't believe it is from the GUI... only the CLI.  You might see it on the logs.  On an HA N+1, when you log into the HA secondary, it will have a popup telling you about the license, but not in AP SSO I don't think.
    Thanks,
    Scott
    *****Help out other by using the rating system and marking answered questions as "Answered"*****

  • Windows 7 computers show a Valid Trust Anchor warning message when connecting to corporate wireless

    We are currently using EAP-TLS  Microsoft:Smart Card or certificates" as the Authentication Method on our Radius/NPS server for authenticating domain laptops to be enable to connect to corporate wireless network. 
    We have a Windows 2003 Root& Issuing CA which has published computer certificates to all the domain laptops/workstations. We have also setup a parallel PKI ( Root and Issuing CA) setup on Windows 2012 OS in the same domain. 
    This Windows 2012 ISsuing CA has also deployed computer certificates to a cpl of testing domain workstations.  So the end result, each of these testing workstations has  2 computer certificates in its PERSONAL Store for client/server auth  (1)
    One issued by the Windows 2003 CA (2) Other cert issued by the Windows 2012 CA.
    We are noticing that windows 7 laptops are throwing a warning message similar to as shown below . I have verified that the ROOT certificate coming from both the CA's described above,  is present in the ROOT TRUSTED CERTIFICATION AUTH Store on each of these
    Windows 7 laptops.   Surprisingly, we don't get this same warning on Windows 8 or 8.1 laptops. 
    Also, if i hit the CONNECT button, i am able to connect to the wireless,
    but then i don't see the "Security " Tab anymore under properties of the wireless profile (SSID).   I found on some forums to click on the Security Tab and further click on "SETTINGS" and check if the ROOT CA cert is present
    in the Trusted Root Certification Authorities” list, .  I dont get  these options anymore after connecting.
      These options do show up on Windows 8 machines after connecting.

    in the wireless connection properties, in the dialog authentication properties you need to select root CAs which are eligible to issue RADIUS server certificates:
    Vadims Podāns, aka PowerShell CryptoGuy
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell File Checksum Integrity Verifier tool.

  • How do I enable the low ink warning message on the HP 7520 e all in one printer

    How do I enable the low ink warning message on the HP 7520 e all in one printer? Or is it even available on this model?
    This question was solved.
    View Solution.

    ccardwell,
    Welcome to the HP Forum.
    The following Assumes a Recent Windows Operating System is installed on your computer...
    The Photosmart 7520 allows you select when you would like to receive Ink Alerts:
    Right Away -- as soon as there is a need for attention
    Only when you initiate a print job
    The Full Feature Software installation procedure places the Printer Assistant shortcut on the Desktop.
    Install Full Feature Software – Photosmart 7520
    Open the Printer Assistant  shortcut > tap on the Estimated Ink Levels icon (along the top ribbon) >
    Toolbox opens > Select tab Advanced Settings >
    Under Show Alerts > CHECK desired setting
    Click Close
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • Removing std warning message in SRM 7.1

    HI,
    We are on SRM 7.1 ECS.
    Whenever account assignment category is changed before ordering a cart,a std warning message is displayed "Enter a value in the mandatory field in account assignment" which is very annoying.Is there any way this message can be stopped to be displayed in the SC screen?
    Pls advise.
    Thanks in advance.

    Thanks Ricardo.
    We are on SP SAPK-70105 for SRM SERVER 701 .I dont undsratnd how this correction came in to our system.
    I'm assuming the corrections of note 1607395 are in the system and hence this message.How do I avoid this message?I tried adding it to table BBPV_PDMSG but that didnt help.
    Pls help.

  • Warning message in mir4 while posting

    hi friends ,
    In miro while we post the parked document then it display the warning message as "RG23 Part II posting not yet done"  , when we click on enter , the document is posting . But the user wants that as an error message not the warning message. So please tell me in what way i can get the solution.
    with regards,
    prasad.

    Hi
    1. Setting up Vendor/Customer is OK to get net balance as you said
    2. Spl GL account to track share capital also seems OK
    3. For grants, there is a specific functionality under PSM (Public Sector Management) component of FSCM... I guess, this is added in EhP4.. I am not sure if it was there earlier as well
    Fund Mngt can also be tried for funds mngt, but am not too sure... Its better to use the specific functionality
    4. Regarding budgeting in CO, it can not be on individual GL accounts.. To have budget on GL accounts, you need to activate Funds MNgt.... Std budgetary control in CO is @ Internal Order Level
    Regards
    Ajay M

  • How to Suppress a warning message in Reports

    Hi All,
    I am getting REP-32751: Warning: Some text segments are missing warning message when ever i open a report and also while run the report in the browser. I am not able to find the missing text segments. Is there any way to suppress this warning message in oracle reports 10g?. Please let me know.
    Regards,
    Prasad.

    Just was curious and was in Metalink anyways and looked up your Error:
    >
    Another workaround: open the report under the desired NLS_LANG, and OK all the warning messages. Once the report is opened, save it (under a different name). This will fill out missing text segments with blanks,which is OK because these strings never appear in the report anyway (theyshould have been deleted...)

  • BI Publisher report ends with Warning Message for Pivot  type reports..

    Hi,
    I had used BI reporting(xml publisher) to develop our all reports and registered in R12 and works fine for all the tabular/forms type reports but it fails with the warning message(colored in yellow) for Pivot type reports. The output comes in xml..
    When I changed the pivot table type report to tabular it comes with pdf. No issues.I do not know how to solve this issue...
    Please help me on this..
    Thanks
    Imran

    Welcome to the forums !
    Pl post details of OS, database and EBS versions, along with the complete error message.
    HTH
    Srini

  • Is there a way to expand the text area of the login/lock screen for the warning message?

    I put our company's standard warning message in the Security & Privacy system preference ("Show a message when the screen is locked.") and it overflowed the allotted text area for the warning message text on the login screen and lock screens.  It seems that the area allows about 250 character messages and I need to provide about 500 characters.  Is there any way to expand the text area allotted for this purpose?
    Bob Reed

    To be a little more specific about the challenge I'm facing, I want to increase the allotted text space for the field I've outlined in the attached image.  Seems like there ought to be a NIB file that could be edited to accomplish this task:
    I would appreciate any advice on which file should be edited to expand the text field.
    Bob Reed

  • How to load a warning message in the sub_VI in a true 'case' statement.

    I wrote a sub virtual instrument (sub_VI) containg a case structure in which a warning message is supposed to be shown only when a case is true, and this works fine by itself alone. However, when I put this sub_VI in the main VI program, the warning message doesn't come up even when the case under sub_VI is true. Is there any way to show this warning message even with the sub_VI under the main VI ?

    By default, sub VI's do not open their front panel when run. If you are putting your warning message on the front panel, then the message will appear when the VI is run on its own (as the main VI) but not when it is run as a sub VI.
    If you use one of the dialog functions such as the "One Button Dialog" fromt the "Time and Dialog" menu, then the message will appear even if used in a sub VI.
    The other option is to right click on your sub VI and set it's properties to open when run and close again afterwards.
    Rob

Maybe you are looking for

  • Is there a way to print an e-mail without also printing a long list of addresses?

    I am a recipient of some newsletters whose authors include recipient e-mail addresses in the To and CC fields. Occasionally I want to forward the newsletter to friends who are not on-line. (Yes, there are still some around.) I do this by printing the

  • Uploading in LR3

    I recently returned from a vacation where I shot with two Canons, plus my iPhone. When I uploaded to LR3 my goal was to move photos from all three devices into a folder called 'March' within my master 2012 folder. The two Canon uploads landed in the

  • Question about returning Apple products

    I'm looking to buy a Macbook Pro from Amazon.com. Can I exchange it at an Apple retail store if there's something wrong with it? Thanks

  • Colours differ between image in PS CS4 and final saved image

    Hi Having an issue that is probably colour prifile ralated, but its got me stumped - i've tweeked everything to no avail! (See system specs at bottom of post) Ok, so IN photoshop itself, I open an image taken on my Nikon D300, which is set to Adobe R

  • Cannot Save as Template in Pages '09

    I would like to create a template in Pages '09. However, whenever I go to File -> Save as template and try to save it, Pages gives me an error message telling me that I don't have permission to do so. I have selected Get Info on the file and made sur