WLC ... WCS ... Location App Compatibility

Hi,
I am trying to setup a new unified wireless solution and I am stuck trying to figure out which software is the best to use with all the different appliances. I have heard that 5.x is real buggy in the WLC appliance so I have gone with 4.2.176MD (I believe) but I haven't heard of anything with the WCS and Location Appliance. After reading some of the release notes it appears that I would have to go with a WCS version of at least 5.1.64 to be compatible with the location version of 5.1.30.0 but I am not sure if they all merry together well.
Any help on this matter would be great.
Thanks in advance!!!

Here is what you can use w/ LBS code:
5.2.91
http://www.cisco.com/en/US/docs/wireless/location/2700/release/notes/larn5291.html#wp998993
5.1.30
http://www.cisco.com/en/US/docs/wireless/location/2700/release/notes/larn5130.html#wp998993
4.0.33
http://www.cisco.com/en/US/docs/wireless/location/2700/release/notes/larn4033.html#wp1036428
If you want to keep the WLC & the WCS on the same level, use this firmware:
3.1.420
http://www.cisco.com/en/US/docs/wireless/location/2700/release/notes/larn31420.html#wp39482

Similar Messages

  • WLC upgrade to 7.0.98.0, WCS & Location Appliance to upgrade - Building maps location

    Hi,
    We recently upgraded about 24 WLCs (4402s and 5508s) from 6.x to 7.0.98.0. In order to support these WLCs through WCS, we also need to upgrade the WCS to 7.0.164 which is currently running at 6.0.132.0 (Linux OS). Same is the case with Wireless Location Appliance 2700 to be upgraded as well. Wireless Management system has number of building maps with AP locations.
    Prior to upgrade the WCS / Location appliance we need to take the backup of these building maps, already stored to export after the upgrade. Kindly let us know the directory where all these maps are being stored, as during upgrade we will loose all the stored data / maps.
    Thanks for your kind assistance.
    Regards.
    Shuja

    Hi Shuja:
    Who says you're going to lose all your maps and stored data during a WCS upgrade?  The installer for WCS 7.0.164.0 will see the 6.0.132.0 installation and upgrade it in place, modifying the existing data to work in the new 7.0 format.  The installer for WCS 7.0.164.0 will even ask you if you want to make a backup of this data before the upgrade process even starts, although it would be a good idea to pull a backup of everything before you start.  (One can never have too many backups, right?)  The backup application in your existing install should be at /opt/WCS6.0.132.0/backup .  Run that application and it will prompt you for a location to put the .nmsbackup file.
    The .nmsbackup file that results from a WCS backup is what gives WCS its portability across platforms (physical/virtual) and operating systems (Windows/Linux).  It's essentially the lifeboat of WCS, containing the database, the maps, the licenses and other supporting files.
    Performing Maintenance Operations chapter of the WCS Configuration Guide:
    http://tools.cisco.com/squish/08725
    Sincerely,
    Rollin Kibbe
    Network Management Systems Team

  • App compatibility problems after installing Yosemite 10.10.3?

    I just installed the latest version of Yosemite (10.10.3) on my 27inch iMac (from 2012/13). 16GB RAM, 3 TB drive,NVIDIA GeForce GTX 675MX 1024MB.
    Since then, I get the spinning beach ball of death and apps just hang (iTunes, Safari) every few minutes and then restart a few seconds later (it happened when Iwas typing this note for example). Feels like app compatibility or permissions problems. I tried the disk utility app to verify and repair disk. Says everything's fine. Switched off wifi to see if it was anything from outside. Still happens.
    The only thing that has changed recently has been the MacOS update.
    Any hints?

    And the next few seconds if you need it.
    23/04/2015 10:13:12.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x9000
    23/04/2015 10:13:12.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
    23/04/2015 10:13:12.075 configd[48]: preference: no sharing preferences
    23/04/2015 10:13:12.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    23/04/2015 10:13:12.000 kernel[0]: **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x9780 -- 0x9800 -- 0x9000 ****
    23/04/2015 10:13:12.000 kernel[0]: Previous shutdown cause: 5
    23/04/2015 10:13:12.000 kernel[0]: DSMOS has arrived
    23/04/2015 10:13:12.185 hidd[94]: IOHIDService compatibility thread running at priority 63 and schedule 2.
    23/04/2015 10:13:12.197 com.apple.SecurityServer[76]: Entering service
    23/04/2015 10:13:12.255 kdc[138]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    23/04/2015 10:13:12.000 kernel[0]: PPGTT is enabled
    23/04/2015 10:13:12.267 com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.system) Service "com.apple.ManagedClient.startup" tried to hijack endpoint "com.apple.ManagedClient.agent" from owner: com.apple.ManagedClient
    23/04/2015 10:13:12.278 systemkeychain[157]: done file: /var/run/systemkeychaincheck.done
    23/04/2015 10:13:12.355 UserEventAgent[40]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    23/04/2015 10:13:12.361 loginwindow[90]: Login Window Application Started
    23/04/2015 10:13:12.363 digest-service[125]: label: default
    23/04/2015 10:13:12.363 digest-service[125]: dbname: od:/Local/Default
    23/04/2015 10:13:12.363 digest-service[125]: mkey_file: /var/db/krb5kdc/m-key
    23/04/2015 10:13:12.363 digest-service[125]: acl_file: /var/db/krb5kdc/kadmind.acl
    23/04/2015 10:13:12.365 digest-service[125]: digest-request: uid=0
    23/04/2015 10:13:12.394 digest-service[125]: digest-request: netr probe 0
    23/04/2015 10:13:12.395 UserEventAgent[40]: Captive: CNPluginHandler en1: Inactive
    23/04/2015 10:13:12.395 digest-service[125]: digest-request: init request
    23/04/2015 10:13:12.401 digest-service[125]: digest-request: init return domain: BUILTIN server: LOCALHOST indomain was: <NULL>
    23/04/2015 10:13:12.510 com.apple.xpc.launchd[1]: (com.apple.appkit.xpc.sandboxedServiceRunner) The JoinExistingSession key is only available to Application services.
    23/04/2015 10:13:12.000 kernel[0]: pci pause: SDXC
    23/04/2015 10:13:13.604 mdmclient[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    23/04/2015 10:13:13.826 configd[48]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en0) failed: Network is down (50)
    23/04/2015 10:13:13.826 configd[48]: DHCP en0: INIT transmit failed
    23/04/2015 10:13:13.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    23/04/2015 10:13:13.000 kernel[0]: en1: channel changed to 1
    23/04/2015 10:13:13.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    23/04/2015 10:13:13.000 kernel[0]: bpfAttach len 94 dlt 163
    23/04/2015 10:13:13.000 kernel[0]: bpfAttach len 30 dlt 105
    23/04/2015 10:13:13.000 kernel[0]: bpfAttach len 52 dlt 127
    23/04/2015 10:13:13.000 kernel[0]: bpfAttach len 38 dlt 192
    23/04/2015 10:13:14.485 locationd[78]: Logging binary sensor data to /var/folders/zz/zyxvpxvq6csfxvn_n00000sm00006d/C/locationdSensors.bin
    23/04/2015 10:13:14.487 locationd[78]: NBB-Could not get UDID for stable refill timing, falling back on random
    23/04/2015 10:13:14.537 thermald[45]: Waiting for OSTT support notification
    23/04/2015 10:13:14.683 locationd[78]: Location icon should now be in state 'Inactive'
    23/04/2015 10:13:14.693 mdmclient[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    23/04/2015 10:13:15.534 secinitd[173]: UID[0]: cache loaded: /System/Library/Caches/com.apple.app-sandbox-cache.plist
    23/04/2015 10:13:15.534 secinitd[173]: ctkd[171]: unable to get root path for bundle of main executable: /System/Library/Frameworks/CryptoTokenKit.framework/ctkd
    23/04/2015 10:13:15.737 com.apple.xpc.launchd[1]: (com.apple.lakitu) The JoinExistingSession key is only available to Application services.
    23/04/2015 10:13:15.737 com.apple.xpc.launchd[1]: (com.apple.accounts.dom) The _DirtyJetsamMemoryLimit key is not available on this platform.
    23/04/2015 10:13:15.737 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    23/04/2015 10:13:15.748 mdmclient[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    23/04/2015 10:13:16.817 mdmclient[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    23/04/2015 10:13:17.138 configd[48]: dhcp_arp_router: en1 SSID unavailable
    23/04/2015 10:13:17.840 mdmclient[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    23/04/2015 10:13:18.098 apsd[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    23/04/2015 10:13:18.126 apsd[73]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
    23/04/2015 10:13:18.127 apsd[73]: Attempt to set push wake topics without dark wake enabled: ()
    23/04/2015 10:13:18.127 apsd[73]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
    23/04/2015 10:13:18.128 apsd[73]: <APSConnectionServer: 0x7fc019f2bfa0> Invalid mach port - Cleaning up this named port's topics. com.apple.askpermission.aps
    23/04/2015 10:13:19.227 discoveryd[72]: Basic Sockets GetProcessNameFromSocket() failed errno[57] err[-1]
    23/04/2015 10:13:19.227 discoveryd[72]: Basic Sockets Unknown(-1), errno 0 UDS FD=3
    23/04/2015 10:13:19.227 discoveryd[72]: Basic Sockets UDS FD=3 ERROR: failed to get effective user ID, errno 0
    23/04/2015 10:13:19.228 discoveryd[72]: Basic SleepProxy BSP Server Disabled. Metric = 3373
    23/04/2015 10:13:19.231 discoveryd[72]: AwdlD2d AwdlD2dInitialize: Initialized
    23/04/2015 10:13:19.232 discoveryd[72]: D2D_IPC: Loaded
    23/04/2015 10:13:19.237 discoveryd[72]: Basic WABServer NetResolverEvent no resolvers, resetting domains
    23/04/2015 10:13:19.237 discoveryd[72]: Basic DNSResolver etc/hosts file changed: Event 0x7fa4a1d01560 Flushed /etc/hosts cache
    23/04/2015 10:13:19.237 discoveryd[72]: Basic RemoteControl com.apple.discoveryd Starting XPC Server
    23/04/2015 10:13:19.238 discoveryd[72]: Basic SleepProxy Could not get the primary interface
    23/04/2015 10:13:19.238 discoveryd[72]: Basic RemoteControl com.apple.discoveryd.dnsproxy Starting XPC Server
    23/04/2015 10:13:19.238 discoveryd[72]: Basic SleepProxy Sleep Proxy Server is not enabled
    23/04/2015 10:13:19.239 discoveryd_helper[191]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server
    23/04/2015 10:13:19.239 discoveryd_helper[191]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7faa82f005d0: start (pid=72, <unknown> not root)
    23/04/2015 10:13:19.256 networkd[192]: networkd-412.20.3 pid 192
    23/04/2015 10:13:19.288 kdc[138]: KDC started
    23/04/2015 10:13:19.788 WindowServer[172]: Server is starting up
    23/04/2015 10:13:19.789 mds[55]: (FMW.Normal:1428) FMW 0 0
    23/04/2015 10:13:19.000 kernel[0]: ARPT: 38.084989: createVirtIf(): ifRole = 1
    23/04/2015 10:13:19.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init name <p2p0> role 1
    23/04/2015 10:13:19.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init <p2p> role 1
    23/04/2015 10:13:19.000 kernel[0]: setVIRTUAL_IF_CREATE: AWDL interface role (4)
    23/04/2015 10:13:19.000 kernel[0]: ARPT: 38.099462: createVirtIf(): ifRole = 1
    23/04/2015 10:13:19.000 kernel[0]: ARPT: 38.099472: Create AWDL virtif(AWDL): unit = 2, ifRole = 4
    23/04/2015 10:13:19.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init name <awdl0> role 4
    23/04/2015 10:13:19.000 kernel[0]: AirPort_Brcm4360_P2PInterface::attachToBpf name <awdl0> role 4 successful attach to bpf type 147
    23/04/2015 10:13:19.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init <awdl> role 4
    23/04/2015 10:13:19.895 airportd[52]: airportdProcessDLILEvent: en1 attached (up)
    23/04/2015 10:13:19.000 kernel[0]: awdl0: promiscuous mode enable succeeded
    23/04/2015 10:13:19.000 kernel[0]: AirPort: Link Up on awdl0
    23/04/2015 10:13:19.000 kernel[0]: IO80211AWDLPeerManager::configure Dynamic country code not supported on this device
    23/04/2015 10:13:19.000 kernel[0]: IO80211AWDLPeerManager::getVHtCapabilityIE  Unable to get vht capabilities ret 2d
    23/04/2015 10:13:19.000 kernel[0]: awdl0: promiscuous mode disable succeeded
    23/04/2015 10:13:19.000 kernel[0]: awdl0: promiscuous mode enable succeeded
    23/04/2015 10:13:19.000 kernel[0]: en1: channel changed to 1
    23/04/2015 10:13:19.000 kernel[0]: IO80211AWDLPeerManager::setAwdlOperatingMode Setting the AWDL operation mode from AUTO to SUSPENDED
    23/04/2015 10:13:19.000 kernel[0]: IO80211AWDLPeerManager::setAwdlSuspendedMode() Suspending AWDL, enterQuietMode(true)
    23/04/2015 10:13:20.023 UserEventAgent[40]: nsurlsessiond_events plugin: adding token 1 for client softwareupdate_download_service
    23/04/2015 10:13:20.000 kernel[0]: en1: 802.11d country code set to 'GB'.
    23/04/2015 10:13:20.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    23/04/2015 10:13:20.069 lsregister[195]: LaunchServices: Begin database seeding
    23/04/2015 10:13:20.069 lsregister[195]: LaunchServices: Completed database seeding
    23/04/2015 10:13:20.000 kernel[0]: en1: 802.11d country code set to 'X3'.
    23/04/2015 10:13:20.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    23/04/2015 10:13:20.000 kernel[0]: ARPT: 38.349180: MacAuthEvent en1   Auth result for: 74:44:01:f3:8b:c4  MAC AUTH succeeded
    23/04/2015 10:13:20.000 kernel[0]: AirPort: Link Up on en1
    23/04/2015 10:13:20.000 kernel[0]: en1: BSSID changed to 74:44:01:f3:8b:c4
    23/04/2015 10:13:20.000 kernel[0]: en1: channel changed to 6
    23/04/2015 10:13:20.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    23/04/2015 10:13:20.000 kernel[0]: ARPT: 38.364370: AWDL Sync Enabled 0
    23/04/2015 10:13:20.165 configd[48]: setting hostname to "stan-woodss-imac.local"
    23/04/2015 10:13:20.169 configd[48]: network changed.
    23/04/2015 10:13:20.000 kernel[0]: AirPort: RSN handshake complete on en1
    23/04/2015 10:13:20.185 com.avast.daemon[149]: Starting daemon.
    23/04/2015 10:13:20.000 kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
    23/04/2015 10:13:20.000 kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice11a2
    23/04/2015 10:13:20.000 kernel[0]: X86PlatformShim::sendPStates - Success!
    23/04/2015 10:13:20.000 kernel[0]: X86PlatformShim::sendPStates - Success!
    23/04/2015 10:13:20.000 kernel[0]: X86PlatformShim::sendPStates - Success!
    23/04/2015 10:13:20.000 kernel[0]: X86PlatformShim::sendPStates - Success!
    23/04/2015 10:13:20.364 locationd[213]: Logging binary sensor data to /var/folders/zz/zyxvpxvq6csfxvn_n00000sm00006d/C/locationdSensors.bin
    23/04/2015 10:13:20.429 locationd[213]: NBB-Could not get UDID for stable refill timing, falling back on random
    23/04/2015 10:13:20.000 kernel[0]: X86PlatformShim::sendStepper - Done!
    23/04/2015 10:13:20.555 WindowServer[172]: Session 257 retained (2 references)
    23/04/2015 10:13:20.556 WindowServer[172]: Session 257 released (1 references)
    23/04/2015 10:13:20.000 kernel[0]: en2: promiscuous mode enable succeeded
    23/04/2015 10:13:20.000 kernel[0]: en3: promiscuous mode enable succeeded
    23/04/2015 10:13:20.567 WindowServer[172]: Session 257 retained (2 references)
    23/04/2015 10:13:20.569 WindowServer[172]: init_page_flip: page flip mode is on
    23/04/2015 10:13:21.092 WindowServer[172]: Found 34 modes for display 0x00000000 [34, 0]
    23/04/2015 10:13:21.096 WindowServer[172]: Found 1 modes for display 0x00000000 [1, 0]
    23/04/2015 10:13:21.098 WindowServer[172]: Found 1 modes for display 0x00000000 [1, 0]
    23/04/2015 10:13:21.099 WindowServer[172]: mux_initialize: Couldn't find any matches
    23/04/2015 10:13:21.103 WindowServer[172]: Found 34 modes for display 0x00000000 [34, 0]
    23/04/2015 10:13:21.106 WindowServer[172]: Found 1 modes for display 0x00000000 [1, 0]
    23/04/2015 10:13:21.106 WindowServer[172]: Found 1 modes for display 0x00000000 [1, 0]
    23/04/2015 10:13:21.206 WindowServer[172]: WSMachineUsesNewStyleMirroring: true
    23/04/2015 10:13:21.207 WindowServer[172]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 34 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0
    UUID 0x1cbf8fef38ae9dfec93508341d780c47
    23/04/2015 10:13:21.207 WindowServer[172]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[4096 x 2160], 2 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    23/04/2015 10:13:21.207 WindowServer[172]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    23/04/2015 10:13:21.207 WindowServer[172]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, e

  • I used the location app to find my daughters ipod with my ipad mini.  App worked great, but now I can't use my ipad, can't get rid of the alerte "ipod located".  Now what do I do

    I used the location app to find my daughters ipod with my ipad mini.  App worked great, but now I can't use my ipad, can't get rid of the alerte "ipod located".  Now what do I do

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • WLC/WCS vs WLSE

    ok..
    I'm looking at these solutions and I'm very puzzled why I would purchase a WLC/WCS/AP vs a WLSE/AP solution.
    First with WLC, i have to deploy multiple WLC's to get global redundancy. Don't need that with AP/WLSE combo. WLSE isn't a global failure point that takes down all my AP's.
    Second, While deploying a WLC is easier as WLSE takes an ACS server and ability to read and deploy WDS services, I can buy a WLSE and ACS server/hardware for less than the cost of one 4400 controller.
    Third - WLSE handles 2500 access points, does heat maps, something I would have to spend extra money and buy WCS for with the WLC. WLSE does the auto-reconfiguration and site survey.
    Seems to me WLC is similar to cars where they took the gauges out and just give you warning lights way of deploying wireless. Don't worry about what it does, just put it in and only pay attention if a red light appears while WLSE takes more knowledge of ACS and WDS, shows you more details, gives you greater control, autonomy and failure redundancy.
    Did I miss something??? It seems like WLC is 3 times as expensive yet doesn't provide anything other than easier deployment.

    Hi,
    Thank you Rpaquin, I also need answer which is better and which one is more sutabile for small wlan ?
    Regards
    Saher

  • I have  purchased house locator apps for my ipad but Icahn not find any house in India  example  my own house ,I can not see.

    I have  purchased house locator apps for my ipad but Icahn not find any house in India  example  my own house ,I can not see. again I want to buy cinema apps  but it shows transecting problem but other apps are purchased easily by my same card.

    I actually have already activated it the passport on AT&T and you are correct as long as Verizon continues with this whole must have CDMA than eventually Verizon will be in Sprints spot. Have to keep up with the changing landscape. As we all know blackberry did not do. However this new passport is so amazing and has that wow factor I think they could be onto something. Let's hope they stay on this path because they are the only phone I use. While there are a lot of great phones out there I am a blackberry user.
    I most likely will not go with the classic because I can't see me going to a smaller screen when I have this one. I have been wanting a large screen keyboard for so long. The keyboard does take some getting used to, and with the passport 2 I'm sure they will correct those things.

  • WLC, WCS

    Sorry I am new with WLC. Can we access WLC from WCS? Are they the same functions? how is the differents WCS vs WLC?
    Thanks

    WLC controls LWAP-imaged WAP.
    WCS "controls" the WLC.
    WCS can do more than just controlling WLC.  They can do this fancy "reporting".
    If you are new to WLC/WCS then I'd recommend you look at Cisco Prime Network Control System.  It comes in two "flavours":  appliance or VMware.

  • Apple is there a way to locate my ipod without a locator app bc mine got stolen and i want it back so it there a way to use the location services to locate my ipod

    apple is there a way to locate my ipod without a locator app bc mine got stolen and i want it back so it there a way to use the location services to locate my ipod

    No, there is not.
    Sorry.
    BTW, you are not addressing Apple here.  We are ipod users like you.

  • How do you locate lost/stolen i pod without an i pod locating app?

    How do you locate lost/stolen i pod without an i pod locating app?

    im asking if someone stole the ipod can apple see if its been any recent activity (has anyone been using it?) by Apple looking throughmy Ipod's serial number?

  • How can I check to see if there is an older version of an app compatable with 4.2.1 before purchase?

    how can I check to see if there is an older version of an app compatable with 4.2.1 before purchase? I don't want to buy an app later to realize there isn't a version supporting my Ipod...

    Apple does not track iPhones reported as stolen, nor
    has AT&T claimed that it currently does so but has
    announced that it is considering doing so in the future.

  • I lost my phone.  Can I use a location app to find my company's iphone?

    I lost my phone.  Can I use a location app to find my company's iphone?

    If the iPhone had your iCloud account set up on it, and in the settings for that account you had enabled "find my iPhone" then you can log in to your iCloud account in a computer's web browser (www.iCloud.com) and try to track it from your account.
    If you did not enable find my iphone, then no, you cannot remotely track it.

  • Current app compatibility issues on iPod Touch!

    I have a 2nd Generation iPod Touch which I've had for a couple of years and I've never experienced any problems with it until the most recent update on the version of software it's running. Since the 4.2.1 update I am no longer able to run some apps on my device and I can't understand why. The two apps in question that won't run are...
    djay for iPhone & iPod touch (Version 1.2)
    The 7th Guest (Version 7.2)
    Everytime I attempt to sync either of these two apps it comes up with an error message stating "The app was not installed on the iPod because it is not compatible with this iPod". Now I've looked around at other problems with app compatibility issues and most people say that you should simply update the iPod. My device is currently up to date so I can't understand why these apps aren't working. Is it because the hardware itself on the 2nd Gen iPod is simply out of date? Any help or insight into this matter would be greatly appreciated.
    Cheers.

    Your iPod's hardware is insufficient. djay for iPhone & iPod touch requires an iPod touch 3rd generation or later (per the developer's web site), and The 7th Guest requires iOS 4.3 or later which will only run on a 3rd-gen iPod touch. If you want to run these two apps, you'll need to get a new, or at least newer, iPod.
    Regards.

  • Is there a tracking/locator app that tracks your stolen or lost macbook?

    Is there a tracking/locator app that tracks your stolen or lost macbook?
    Obviously you would DL this before it's missing.

    If you never activated the Find My Mac option, the answer is no. 
    Reporting a lost or stolen Mac Product 

  • Locator app

    My dgt lost her itouch how do I use locator app?

    IF you set up find my ipod on the ipod BEFORE it was lost AND it is on AND it is connected to wi-fi, then you may be able to get an approximate street address using icloud/find my ipod.
    Otherwsie you cannot track it.

  • If I downgrade from 4.01 to 3.* will I face app compatibility problems?

    Can someone who has already downgraded please tell me if they've run into any 3rd party app compatibility issues.
    I'm totally over this ******** iOSlow 4.01 on my 3G. Missed another REALLY important call yesterday due to unlock/answer bar freeze.
    But I've got a number of 3rd party apps (which I've updated since 4.0 release)that I find really handy and want to know, will they still work if I downgrade?

    iTunes will always update an app to the latest version, and if that version happens to be one that will only run on iOS4 then you're out of luck.
    However, there is (apparently) a way around this - a way to downgrade your apps back to OS 3 compatible ones.
    According to the chap behind the Tube Status app*, all you need to do is go to your Time Machine backup for an app, and restore the older version of the app to your iTunes library. Can't try it myself as my 3G had no problems with iOS 4, and anyway I'm on an iPhone 4 now, but it certainly sounds like it should work.
    * http://mbarclay.net/?p=640 - right at the bottom.

Maybe you are looking for

  • Help Needed Configuring Post Set Up For Big Indie Feature:

    We’ve got incredible performances from an amazing cast of well-known character actors from film, TV and stage, a unique and inspiring script, and some truly beautiful, cinematic footage. And now — it’s all about putting it together… But I’m having tr

  • Photoshop CS4 crashes when I drag layers

    I received my brand new Macbook pro just the other day. I installed all of my old applications, including Photoshop, gearing up for a new web project. After working fine for a few days, Photoshop started crashing frequently. I found that the main cul

  • Using URL Parameters with HTTP Comms Channel

    Hi, I need to build a new interface (HTTP - RFC) which will use several URL parameters. I've created a HTTP communications channel and Sender Service and this works. I'm able to define several URL Parameters by checking 'Adapter-Sepcific Message Attr

  • IMAC als externer Monitor

    Hi, i will use my iMAC 27'' (Model: Middle 2011) as an external monitor. The signal should come from an Laptop Dell Latitude E6230 over an "HDMI to thunderbold"  cable. The cable is from my apple shop and named "Mini displayPort HDMI Cable". After re

  • Am i the only one with the problem that a lot of my itunes music sounds overdriven

    basically, some of the music i downloaded sounds overdriven, but when i listen to the music with VLC player for example it sounds absolutely fine, also the problem with the music sounding overdriven is easily solved by enabling bitperfect