WLC & WCS - who was logged in...

Hello,
I need to know which users used our wireless lan on sunday. To connect to the wlan they have to type in the wpa2 networkkey and then authenticate with username and password (web authentic.).
I could not find a logfile with this informations.
We are using WLC 4400 and WCS 5.0.56.2
Please help me,
greetings Lydia

Hi,
yes it helps, mainly for the future because the Authentication-option was disabled and so I can't get information about last sunday. But referring to this I found out something with the "busiest client"-report.
Thank you.

Similar Messages

Check who was logged in

Hello!
Is it possible to check who was logged in to my AirPort? Unfortunatley my guest network was active and without password when I checked today. I disabled the guest network in an instance. Can I check if someone was using my network?

It is not possible to check "WHO" was logged in. However something to consider.
If you leave the guest network active and monitor your DHCP Log's you can get their
MAC address, IP , and computer name. Usually a computer name may tell you what you want to know.
Since they have to be close enough to your wifi network to connect to your guest network. A good chance a computer name would be someone you know. If not you can look at the computers near you and see their name till you find it. Then you can figure out the "WHO" part.
Just a idea is all.
Good Luck

Updated WLC has strange error log and AP's not joining

Hi we recently updated all of our WLC's to 7.098 and it all went smoothly, controllers rebooted and AP's updated their firmware and rebooted OK.
One WLC (4402) which was working fine since the update now has no AP's associated. The AP's were all configured to run in HREAP mode and are on remote sites within our WAN. I have checked that all policies and ports are still open (none have changed anyway) but the AP's can not join with the contoller.
The log from an AP trying to join with the WLC.
*Mar 1 00:15:24.966: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar 1 00:15:34.991: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jan 12 02:17:56.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.96.4.17 peer_port: 5246
*Jan 12 02:17:56.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Jan 12 02:18:17.447: %CDP_PD-2-POWER_LOW: All radios disabled - NON_CISCO-NO_CDP_RECEIVED (0000.0000.0000)
*Jan 12 02:18:25.999: DTLS_CLIENT_ERROR: ../dtls/dtls_connection_db.c:2013 Max retransmission count reached!
*Jan 12 02:18:25.999: %DTLS-3-HANDSHAKE_RETRANSMIT: Max retransmit count for 10.96.4.17 is reached.
*Jan 12 02:18:56.000: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 10.96.4.17:5246
*Jan 12 02:18:56.000: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jan 12 02:18:56.001: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jan 12 02:19:06.006: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Jan 12 02:19:06.006: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
*Jan 12 02:19:06.014: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Jan 12 02:19:11.013: %LWAPP-3-CLIENTERRORLOG: Join Timer: did not recieve join response (controller - ceo-wlc-01)
The logs on WLC show as below.
*emWeb: Jan 12 13:14:13.629: %AAA-5-AAA_AUTH_ADMIN_USER: aaa.c:1289 Authentication succeeded for admin user 'adann'
*spamReceiveTask: Jan 12 13:14:12.919: %LWAPP-6-CAPWAP_SUPP_VER: spam_lrad.c:1440 Discarding discovery request in LWAPP from AP 00:21:a0:81:a4:10 supporting CAPWAP
*spamReceiveTask: Jan 12 13:14:11.543: %LWAPP-6-CAPWAP_SUPP_VER: spam_lrad.c:1440 Discarding discovery request in LWAPP from AP 00:21:a0:81:8f:a0 supporting CAPWAP
*spamReceiveTask: Jan 12 13:14:11.395: %LWAPP-6-CAPWAP_SUPP_VER: spam_lrad.c:1440 Discarding discovery request in LWAPP from AP 00:24:14:ff:f1:70 supporting CAPWAP
*emWeb: Jan 12 13:14:10.731: %AAA-5-AAA_AUTH_ADMIN_USER: aaa.c:1289 Authentication succeeded for admin user 'adann'[...It occurred 2 times/sec!.]
*emWeb: Jan 12 13:14:09.459: %AAA-5-AAA_AUTH_ADMIN_USER: aaa.c:1289 Authentication succeeded for admin user 'adann'
*spamReceiveTask: Jan 12 13:14:09.457: %LWAPP-6-CAPWAP_SUPP_VER: spam_lrad.c:1440 Discarding discovery request in LWAPP from AP 00:24:14:ff:ec:00 supporting CAPWAP
Any suggestions would be appreciated!
Tony

Strange. Something must have happened that you didn't notice.
From the logs, it looks like only lwapp requests are arriving at the WLC. And WLC discards them cause it knows the AP can also do capwap so it's waiting for the capwap join packet.
As next step, I'd take a look at network traffic. Mostly close to the WLC where we want to know if we are receiving capwap discovery/join from the AP or not.
Nicolas

Who was the user that modified an Analysis

Hi All
I´m using obiee 11g v 11.1.1.5.0 on Oracle Linux 5
I have 2 users for my example, user1 and user2 (both BIAdministrator Role)
user1 creates an Analysis with 2 colums: 1 from dim_table, 1 from fact_table (user1 saves as Analysis_name_X in SharedFolder_X).
user2 opens and modify the same Analysis_name_X from SharedFolder_X (adding a new dim_column and just save the Analysis_name_X).
so... in catalog says:
SharedFolder_X
Analysis_name_X | Last Modified Time DD/MM/YYYY HH24::MIN:SS | Created by user1
My question is: "How to know, who was the user who modified the Analysis_name_X" (in this case user2)
I search in Catalog Manager
columns availables:
Created Time, Last Accessed Time, Last Modified Time, Owner
but no something like: Last Modified User
Also with user weblogic searching in all folders (activating Administrator view) without success.
I appreciate any help!
Greetings

Hi Srini
I appreciate your help.
It's a little hard to find someone who modified the Analysis, because I guided only by the name of the Analysis into NQQuery.log file.
You know another easier way to know who modify this Analysis?
Thank you.

I have a macbook pro and a ipod and yesterday while I was on my laptop on Facebook playing words with friends with my daughter who was on the iPod playing under her user name it seems that they combined into one profile. what happened

I have a macbook pro and a ipod and yesterday while I was on my laptop on Facebook playing words with friends with my daughter who was on the iPod playing under her user name it seems that they combined into one profile. what happened? they used to be separate and we could play against each other but now it says its the same user for both even though I signed in on facebook with my log on and she was on her ipod with her profile. can I fix this?

You might need to be asking the folks at Facebook.

How to find out list of users who has logged into webtools

Hi All,
From a database administration and monitoring traffic point of view we want to know who has logged into our web tools web site for a given period. Is there a easy way to have this information. basically user ID , date and time are info we need. (need all users - with or without orders)
any ideas welcome.
Regards
David

Hello,
The easiest way to accomplish this is by creating a report.
Use the SQL query
SELECT     UserID, LastVisitDate
FROM         Users
ORDER BY LastVisitDate DESC
And a template that looks something like this:
<html>
<head>
<title>%%ReportName%% - %%Today, {0:d}%%</title>
%%StyleSheet%%
</head>
<body>
<center>
<h1>%%ReportName%%</h1>
<table width=800 cellpadding=1 cellspacing=0 border=1>
<tr>
<td><b>User ID</b></td>
<td><b>Last Visit</b></td>
</tr>
<section name="uservisit">
<tr>
<td>%%UserID%%</td>
<td>%%LastVisitDate%%</td>
</tr>
</section>
</table>
</center>
</body>
</html>

Tried to sync my 5c on itunes but my daughter was logged in and now all her contacts, apps, and messages etc are on my phone. I was in the process of trying to run a backup because there was not enough memory for my phone to perform it. Help!!

I was in the process of syncing my iphone 5c and then wanting to do a backup through iTunes because my phone did not have enough memory to backup. When I connected the phone to my computer and pulled up Itunes I thought I was logged into Itunes (my name was showing) but apparently my daughter had used and logged into itunes. Needless to say it started to sync and now my phone has all of her contacts, messages, apps etc. I followed what had been previously posted :
This solved my question by Malignance on Feb 23, 2013 11:27 AM
You should use separate Apple ID's for iCloud, iMessage and FaceTime. These services are separate from iTunes.
Create a new Apple ID > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ -- Note: You need a verified email address
On one of the devices go:
Settings > iCloud > (Scroll Down) Delete Account > Sign in with the new Apple ID -- Note: This only affects the device
Settings > Messages > Send and Received > Apple ID > Sign Out > Sign in with the new Apple ID
Settings > FaceTime > Apple ID > Sign Out > Sign in with the new Apple ID
This will separate your iCloud content (i.e. Contacts, Notes, Reminders etc.), Messages and FaceTime.
You both can continue to use the same Apple ID for iTunes and share purchased Apps, Music and Movies
See the answer in context
But I still have all her info on my phone. Is there any other way I can fix this or do I need to physically delete each contact, app, and message from my phone (and I still have not run a backup). Thanks for any help you can give me.

If her data was not backed up or synced to something, it's gone. Sorry.

My daughter's mac synced her music to my wife's ipad even though she was logged into itunes on my wife's account. How do I remove my daughter's music and get my wife's music?

while setting up my wife's new ipad, my daughter connected it to her mac. She was logged into my wife's itunes account, but it synced my daughter's music to the ipad,none of my wife's music is on the ipad. How do we remove all my daughter's music?

The iPad does not sync to an iTunes account, it syncs to an iTunes library. Sync the iPad again to your daughter's computer and uncheck all of the music that is currently on the iPad to remove it.
Connect the iPad to your daughter's computer, launch iTunes, click on the iPad name on the left sidebar under Devices, then click on the Music Tab at the top of the iTunes window, uncheck the box next to Sync Music, a dialog box will pop up asking if you are sure ... the music will be removed ... click Don't Sync Music, then click apply in the lower right corner of iTunes and it should remove all of the music.

My iPad was logging me out so I have reset it - I cannot log into iCloud now and also my login for app updates defaults to an incorrect email address can anyone suggest how to re configure

My iPad was logging me out so I have reset it - it retained all apps but I cannot now log into iCloud and when downloading apps it defaults to the wrong email details so the iPad doesn't recognise it to update - can anyone suggest how to resolve this

Have you attempted to access your Apple ID through iforgot.apple.com ?
If you have access to the internet, you should be able to go through the process of resetting your Apple ID password via security questions or email.
Assuming that you use the same Apple ID for iCloud and the iTunes/App Stores, resetting your password may help you log back into iCloud and the iTunes/App Stores.

I have a friend who was going to sync her phone with my computer to get the new update.. how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..

i have a friend who was going to sync her phone with my computer to get the new update.. how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..

First, create a separate login on your computer for your friend. Do this BEFORE you do anything else. Next, make sure iTunes is up to date. Then:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in iTunes.
2. Make sure you have one contact & one event in the supported applications(Address Book, iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect her phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on her phone will be in her itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore her itunes content, which you select from the various tabs, You'll get a popup regarding her contacts & calendars asking to merge or replace, select merge.
You should be good to go.

Tried to update an app and it asked for the password to my sister's Apple ID. I then checked to see whose Apple ID was logged in, in settings and it said that I was logged in. How do I get the app store to ask for MY Apple ID, not my sister's?

Tried to update an app on my phone but when it asked me to give the password for my AppleID, it was asking for the password to my sister's AppleID. I went to setting and down to itunes&app store settings and checked which AppleID was logged in, but i found that it was my AppleID that was logged in, not my my sisters. I then tried logging out and logging back in again but the app store, regardless of this, still asks me for my sister's AppleID and I don't know her password...How do I get the app store to ask me for MY AppleID password, not my sister's?

If this app was bought by your sister with her Apple ID, only her ID can update the app.

I was logged in with a temporary profile on my pc, after restarting everything seemed to be fine. But my iTunes music is all in the cloud now, and my playlists are gone. What do I do?

I was logged in with a temporary profile on my pc, after restarting everything seemed to be fine. But my iTunes music is all in the cloud now, and my playlists are gone. What do I do?
My iTunes media folder shows ALL of my music still there (including all from imported CD's), but on my iTunes, it says most of it is in the cloud? As well as my playlists that I have had for YEARS, are all gone. I just recently got a new laptop and had my iTunes transferred over, when I re-downloaded iTunes onto it, everything popped up perfectly from this same file. Now after this "Temporary Profile" mishap, nothing is working properly with iTunes.
Help! Please.

Do this. If all the synced media like apps and music are alread in the the iTnunes library just backup the iPod and restore from that backup
iOS: How to back up and restore your content
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

How do you assign the user who has logged in current session ?

Hello,
in oracle forms , you could assigned user who has logged in to any field , e.g field_name := USER_ID;
I need to assign the user who has logged to a field in jdeveloper 12 . How do you do that please ?
Thanks.

Try this: https://www.google.com/search?q=adf+get+current+user
CM.

How to capture the user who has logged into the portal.

Hi,
How do I capture the user who has logged into the portal.
HOw do I retrieve the first name and last name of the logged in username.
Could someone provide me a related link or PDF to work on this.
Thanks,
Suvarna

Hi suvarna,
Check the following code
ISearchResult rst = UMFactory.getUserFactory().getUniqueIDs();
                  IUserFactory usf = UMFactory.getUserFactory();
                  IUser iuser = null;
                  IUserListElement userElement = null;
                  int i = 0;
                  while (rst.hasNext()) {
                        iuser =
                              UMFactory.getUserFactory().getUser(rst.next().toString());
                        String email = iuser.getEmail();
                        String fname = iuser.getFirstName();
                        String lname = iuser.getLastName();
regards
Anil Dichpally

When I create a photo stream in ios6, everyone who is logged in to my iCloud account can see and edit my stream (on their iPhones only). Not just the email addressees that I sent the photo stream link to. Is that how photo stream security is meant to work

When I create a photo stream in ios6, everyone who is logged in to my iCloud account can see and edit my stream (on their iPhones only). Not just the email addressees that I sent the photo stream link to. Is that how photo stream security is meant to work? Is so it means my whole family can see any photo stream I set up. Hence no security? Can't share the pics with the wife then :(

The whole idea to an icloud account is that one user uses it and has all their devices synced together. Different users need different Apple IDs to create their own icloud accounts. Note that everyone can still use the same ID for an iTunes account (to share purchases).
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

WLC & WCS - who was logged in...

Similar Messages

Maybe you are looking for