WLC2006 - How to clear client statistics

Hi,
I have a few questions about the WLC2006 CLI:
1 - Client statistics can be displayed on the WLC2006 with the command "show client detail <MAC addr>". I don't find in the documentation how to clear these statistics.
2 - Comments are generally welcome in capture files. What is the "!" IOS equivalent?
3 - Is it possible to suppress the "more" with a command such as "terminal length 0"?
Any link is welcome. Thanks by advance.
Best Regards,
Alain-Claude

The show client detail command output depends on the clients that are presently associated with the LAP. Once the clients get disconnected from the network, the stats should get cleared automatically.
We presently do not have a equivalent command for terminal length 0.

Similar Messages

  • How to clear dhcp clients table

    Does anyone know how to clear the DHCP Clients Table?
    I have a WRV54G.
    Regards
    Solved!
    Go to Solution.

    I understand this is a very old post, but since I found it when I was looking for the same answer in 2009, I thought I would go ahead and give my $.02 worth.
    I have a different router, so this may not be present in yours.
    I use a  WRT54GLwith firmware version 4.30.7 and finally found on the Status page under "Local Network" a link to the DHCP table. You can click on that and delete the existing IPs.

  • How to clear "show summary" service hit statistics on CSS11500?

    Sounds simple but I'm unable to locate the command to clear these statistics other than a reboot.
    We are testing the CSS 11500 and trying to determine the hit counts. Clearing these statistics would be very helpful.
    Help is much appreciated! Regards

    Hi Kenneth,
    You can clear the counters by going into the owner prompt and give command "zero all"
    css(owner[tanveer])#zero all
    Tanveer

  • How to clear associated Clients using CLI or GUI in WiSM?

    Hi,
         We have WiSM controller LAP Management. I want to clear clients those who are associated but not authenticated to Wi-Fi.
    I tried this using GUI but it takes time since i have to remove each client one by one.
    Is there any method by which I can remove multiple clients at one time?

    associated but not authenticated to Wi-Fi is an issue on open auth network along with draining dhcp pool.
    It could be mitigated through:
    disable broadcast ssid -publish the same.
    Have security like wep/wpa -publish this around the open wifi access area.
    Increase dhcp pool size and or reduce the lease time.
    reduce idle and session timeout.
    WLC doesn't have proactive way to remove or deauth those clients since there could be real clients that is on idle will get disconnected as well.
    it is nice to kick the wireless clients on webauth wlan if the client didn't webauth within specific time.
    what do you guys think.

  • How to clear outbound Queue in  SXMB_MONI

    HI Experts,
    Unable to process the file in SXMB_MONI as a result the files are getting strucked with the QUEUE and now how to clear this queues for processsing the file...
    and another i have configure the server with 611 client but while executing the client of the server is showing 001 and we didn't observe initially as it is working fine but when we observed now it is found
    is this has an impact..
    do we need to do any other certain configurations at the Server end..
    regards,
    Kishore

    > There is no URL in SXMB_ADM, how to provide an url there, and even before we didn't get this problem as the files are successfully processsing for the past 3 months in PDN, and now we are getting this problem.
    >
    Hello,
    I have understood your problem but you are not following the steps which we are mentioning here.
    For your above problem you need to follow ONLY step no1 & 2 mentioned in the blog since steps are common for acitvating the proxy and thats way you are getting confused that why I am asking you to follow that blog.
    In the blog step 1 will simply help you creat the RFC destination.
    Step 2 will help you to use the above RFC destinaiton as an url.
    In opionion if you resolve this problem first then it will be easier to solve your queue problem.
    Please let me know if you need more help/clarification in this regard i will help you.
    Regards,
    Sarvesh

  • GR in one GL Code and IR in different GL code -how to clear?

    hi,
    If the
    gl a/c during GR differ from gl a/c during Invoice verification then
    what configuration we need to do so that these accounts  get cleared
    automatically?
    For example
    During  GR  the GR/IR clearing a/c was 307213 and during Invoice
    Verification the GR/IR clearing A/c is 307212.What
    configuration is needed to clear these two?

    Hi laxmi
    sorry I dont think it will work. Presently for this particular client the GR and IR getting posted in the same a/c for that particular valuation class.
    for example valuation class is 3009.
    for this valuation class GR and IR both the a/c NOW is 307213.
    But in between they have some GR and IR for which they have different accounts. How to clear those?

  • How to clear the cache files in folder Temporary Internet Files

    When one user opens files such as pdf. or doc. from Portal,  the same file will be downloaded into the Temporary Internet Files folder. if another user copied the files out of the Temporary Internet Files folder from this computer and save to someplace else, then we face one security problem.
    So my question is: How to clear the cache files in folder Temporary Internet Files??  Can we delete the files automatically when close the files in Portal??
    or is there some ways to make encrypty???
    Thanks very much!

    Hello,
    this is a basical security problem which should be resolved by the OS standard security setup . No other user should have access to the temporary file folders in the personal directory. The user account must be secure. Normaly your security problem should not be a problem if basic security exists on the clients.
    You can resolve this problem if every user has his own account on the client
    The users having no administration permissions on the clients
    The folder for the temporary internet files is placed in the personal profile folder of the user account.
    On default no other user has access rights to you personal folder, this means the client OS is setup correctly.
    You can setup the IE that no temporary files are saved (but it reduces performance)
    You can enable IE to delete automaticly the temporary files if IE is closed.
    Hope it helps.
    Regards
    Alex

  • How to clear cache POP-UP LOV

    Hi All,
    How to clear cache POP-UP LOV .
    For example :
    I had created one pop-up lov "Marketing client", when I select any value from pop-up lov . If the Marketing Client already has 'AIM Investments' but someone clicks the item to get to search for a different one it currently only shows 'AIM Investments' unless someone blanks out the search box.
    What I want is every time I click on LOV it will show all the values. User need not to clear the search box to get all the values.
    Any pointer.
    Regards
    Dikshit

    Hi All,
    How to clear cache POP-UP LOV .
    For example :
    I had created one pop-up lov "Marketing client", when I select any value from pop-up lov . If the Marketing Client already has 'AIM Investments' but someone clicks the item to get to search for a different one it currently only shows 'AIM Investments' unless someone blanks out the search box.
    What I want is every time I click on LOV it will show all the values. User need not to clear the search box to get all the values.
    Any pointer.
    Regards
    Dikshit

  • WCS 4.0 Client Statistics without Location Services

    Hello,
    when I watch a client in the WCS 4.0.96(base only version) the section named "client statistics" only prints "Location Server did not return any statistics information for this client."
    Does that mean, that I need a location version to get infos like how much traffic a client generated? That would be hard to believe... :-/
    greetings, p.k.

    We do not have location services. We only have a Base version license for WCS.
    But I see no reason why location services are required for such simple statistics how much traffic a user created.
    p.k.

  • How to clear completed reminders in iCal

    Has anyone figured out how to clear completed (checked done) reminders in iCal?

    Joe,
    That clarifies the question for me. Go to iCal>Preferences>Advanced and make your choices:

  • How to clear text fields when the user navigates back to the screen

    Hi,
    Does anyone have any idea on how to clear the text input fields and dropdown boxes when the user navigates back to the screen, say for e.g. create screen?
    My issue is that i have plenty of fields in the create screen within a form. Is there a way to avoid programaticaly blanking out every field and just do it at the form level using an api to reset to a state before the user entry?
    Thanks

    This code allows you to make it more generic, and you would need to tweak it if there are more than TextInput controls, but it should provide some ideas.
    As far as using states, you could use SetProperty to set the text to empty, but that might be messier.
    <?xml version="1.0"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
      <mx:Script>
        <![CDATA[
          import mx.containers.FormItem;
          import mx.controls.TextInput;
          import mx.events.IndexChangedEvent;
          import mx.core.Container;
          private function clearSreen(evt:IndexChangedEvent):void{
            var view:Container = tn.selectedChild as Container;
            for each(var child:Object in view.getChildren()){
              if(child is FormItem){
                var subchild:DisplayObject = child.getChildAt(0);
                if(subchild is TextInput){
                  TextInput(subchild).text = "";
        ]]>
      </mx:Script>
      <mx:TabNavigator id="tn" resizeToContent="true"
        change="clearSreen(event)">
        <mx:Form id="frm1" label="View Number One">
          <mx:FormItem label="First name:">
            <mx:TextInput/>
          </mx:FormItem>
          <mx:FormItem label="Last name:">
            <mx:TextInput/>
          </mx:FormItem>
        </mx:Form>
        <mx:Form id="frm2" label="View Number Two">
          <mx:FormItem label="Address1:">
            <mx:TextInput/>
          </mx:FormItem>
          <mx:FormItem label="Address2:">
            <mx:TextInput/>
          </mx:FormItem>
          <mx:FormItem label="City:">
            <mx:TextInput/>
          </mx:FormItem>
          <mx:FormItem label="State:">
            <mx:TextInput/>
          </mx:FormItem>
          <mx:FormItem label="Zip code:">
            <mx:TextInput/>
          </mx:FormItem>
        </mx:Form>
      </mx:TabNavigator>
    </mx:Application>
    If this post answers your question or helps, please mark it as such. Thanks!
    http://www.stardustsystems.com
    Adobe Flex Development and Support Services

  • How to clear vendor open items with customer open items in APP?

    Hi Experts,
    Our vendor is our customer - in this scenario how to clear vedor open items against customer open items. I have defined vedor is customer means I have given customer number in vendor master record, selected chek box 'clear with customer'.  Still problem is not solved, hence I am requesting you to help me in this regard.
    Thank you very much,
    Regards,
    Ganesh.

    Hi
    In FBCJ after payment you have clear manually vendor balance in F-44.
    If you want SPL GL in FBCJ then write a Substitution .
    1. step 001 - Special G/L Substitution
    2. Prerequisite - Transaction code = 'FBCJ'
    3. Substitution posting key -- Exit (need help from abap) exit name
                                              G/L Exit (need help from abap) exit name
                                              Special G/L Ind Exit (need help from abap) exit name
    you can't do this without ABAP help
    Best Of Luck
    Tanmoy

  • How to clear vendor open items if vendor invoice currency and payment currency different

    Hi All.
    How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD  but local currency is INR
    while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
    I checked all configuration, configuration wise no problem
    BR.
    Chandra

    Hi Chandra,
    You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
    Invoice is in USD - 1000 & INR - 60000
    Payment is in INR - 60000
    Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
    Vendor A/c Dr 60000 (invoice)
    Vendor A/c Cr 60000 (Payment)
    Gain from exchange rate A/c Cr  100 (60000 - 60100)
    Small diff.write off A/c (or) Dummy A/c Dr 100
    After done the above posting, we have to pass below manual JV in FB01
    Gain from exchange rate A/c Dr  100
    Small diff.write off A/c (or) Dummy A/c Cr 100
    Regards,
    Mukthar

  • How to clear the open documents in case if document currency and local curr

    Hi,
        Can anyboday advise how to clear the open document of a particular vendor for a particular company code. Here the issue is that balace is netted to Zero in the document currency but not in the local currency. The document was posted in Currency CAD and the local currency is GBP.
    When i check the FBL1N, there is it showing net balance is ZERO, but document is still in open
    status. I tried using Transaction code F-44, but it is not allowing me.
    Can anyboday advise how to perform this. Points will be awarded.
    Regards,
    Sree.

    Hi,
    In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
    and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
    Hope this will resolve
    Assign points if useful
    Thanks
    Aravind
    Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

  • How to clear vendor open documents

    How to clear vendor open documents, I had previously tried to clear the documents in PRD with transaction F-44 and I get the following message.
    X. Ex.rate diff.accts are incomplete for account 00015080 currency CAD

    You can clear using the t code F-44 which is manual or by using F.13 which is automatic.
    The error you are getting is with refernce to a transaction between your Local currency and Currency "CAD"
    Maintain a transalation ratio and the exchange rate. Here the system also looks for a exchange loss or gain on such conversion also. Map those accounts and you will be clearing the transaction.
    If you are using automacti clearing you need to decide on the link(Common feild)  between the DR open item and CR open item and these open items after having this as a refernce can be cleared automatcially in F.13.
    Hope you understood.
    Reward points if useful.
    sarma

Maybe you are looking for