Wldeploy dosent work as expected in 11.1.2 as it works in 11.1.1.1.5
I have the exactly same problem as described in this thread Error running Weblogic.Deployer in medrec tutorial (wl9.1)
But my old jdev version (11.1.1.1.5) where things works fine and I am migrating to new jdev version (11.1.2) during wldeploy
C:\Oracle\Middleware1112\jdeveloper\jdev\bin>
C:\Oracle\Middleware1112\jdk160_24\bin\javaw.exe -client -Dosgi.clean=true -XX:MaxPermSize=256M -Xbootclasspath/p:../lib/lwawt.jar -Xbootclasspath/p:../lib/apt-expose.jar -Dsun.awt.keepWorkingSetOnMinimize=true -XX:+HeapDumpOnOutOfMemoryError -Doracle.jdeveloper.webservice.showAllOwsmPolicyTypes=false -Doracle.jdeveloper.webservice.hidePropertyOverride=false -Dsun.awt.disablegrab=true -Xbootclasspath/p:../../rdbms/jlib/ojdi.jar -Dide.patches.dir=jdev/lib/patches -Dnetbeans.home=../../netbeans/platform/ -Dnetbeans.logger.console=true -Dexcluded.modules=org.eclipse.osgi -Dide.cluster.dirs=../../netbeans/netbinox/:../../netbeans/bridge/:../../ -Xmx800M -Xms128M -Xverify:none -Doracle.ide.extension.HooksProcessingMode=LAZY -Dorg.eclipse.equinox.simpleconfigurator.configUrl=file:bundles.info -Dosgi.bundles=file:../ide/lib/oracle.ide.osgi.jar@3:start -Dosgi.bundles.defaultStartLevel=1 -Dosgi.configuration.cascaded=false -Dosgi.noShutdown=true -Dorg.osgi.framework.bootdelegation=* -Dosgi.parentClassloader=app -Xbootclasspath/p:../../rdbms/jlib/ojdi.jar -Dosgi.classloader.singleThreadLoads=true -Dosgi.bundlefile.limit=2000 -Xbootclasspath/a:../../../oracle_common/modules/oracle.nlsrtl_11.1.0/orai18n-collation.jar -Xbootclasspath/a:../../../oracle_common/modules/oracle.nlsrtl_11.1.0/orai18n-mapping.jar -Xbootclasspath/a:../../../oracle_common/modules/oracle.nlsrtl_11.1.0/orai18n-servlet.jar -Xbootclasspath/a:../../../oracle_common/modules/oracle.nlsrtl_11.1.0/orai18n-utility.jar -Xbootclasspath/a:../../../oracle_common/modules/oracle.nlsrtl_11.1.0/orai18n.jar -Xbootclasspath/a:../../../oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar -Djavax.xml.parsers.DocumentBuilderFactory=oracle.xml.jaxp.JXDocumentBuilderFactory -Djavax.xml.parsers.SAXParserFactory=oracle.xml.jaxp.JXSAXParserFactory -Dorg.xml.sax.driver=oracle.xml.parser.v2.SAXParser -Dide.feedback-server=ide.us.oracle.com -Xbootclasspath/a:../../ide/lib/xml-factory.jar -Djavax.xml.transform.TransformerFactory=oracle.ide.xml.SwitchableTransformerFactory -Dsun.java2d.noddraw=true -Dide.conf=C:\Oracle\Middleware1112\jdeveloper\jdev\bin\jdev.conf -Dide.startingcwd=C:\Oracle\Middleware1112\jdeveloper\jdev\bin "-Dide.user.dir=C:\Documents and Settings\pakrish.APPLICATIONS\Application Data\JDeveloper\system11.1.2.0.38.60.17\o.jdeveloper.extensiondt.core\EDTplatform-dt_jdev-UserAndPrefDir" -Dedt.hot.classes=D:\tmp\jdev1112\SAIExtn_1App\TestAntInvoke\classes -Dedt.hot.manifest=D:\tmp\jdev1112\SAIExtn_1App\TestAntInvoke\src\META-INF\extension.xml -Dedt.hot.deploydir=jdev/extensions/ -Dedt.extension.id=yourcompany.testantinvoke -agentlib:jdwp=transport=dt_socket,server=y,address=1589 -Dcom.sun.xml.bind.v2.bytecode.ClassTailor.noOptimize=true -classpath C:\Oracle\Middleware1112\jdeveloper\ide\lib\ide-boot.jar;C:\Oracle\Middleware1112\jdeveloper\netbeans\platform\lib\boot.jar;C:\Oracle\Middleware1112\jdeveloper\netbeans\platform\lib\org-openide-util.jar;C:\Oracle\Middleware1112\jdeveloper\netbeans\platform\lib\org-openide-util-lookup.jar;C:\Oracle\Middleware1112\jdeveloper\netbeans\platform\lib\org-openide-modules.jar;C:\Oracle\Middleware1112\jdeveloper\ide\lib\fcpboot.jar -Djavax.net.ssl.trustStore=C:\DOCUME~1\PAKRIS~1.APP\LOCALS~1\Temp\trustStore5123141337500065063.jks -Dhttp.proxyHost=www-proxy.us.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=localhost|localhost.localdomain|127.0.0.1|::1|10.177.10.174| -Dhttps.proxyHost=www-proxy.us.oracle.com -Dhttps.proxyPort=80 -Xbootclasspath/a:C:\Oracle\Middleware1112\jdk160_24\lib\tools.jar;C:\Oracle\Middleware1112\jdk160_24\lib\dt.jar oracle.ide.osgi.boot.JDeveloper
Listening for transport dt_socket at address: 1589
Debugger connected to local process.
Source breakpoint: InvokeAnt.java:35
Source breakpoint: InvokeAnt.java:63
Warning: Reference lib.path has not been set at runtime, but was found during
build file parsing, attempting to resolve. Future versions of Ant may support
referencing ids defined in non-executed targets.
deploy:
weblogic.Deployer -debug -nostage -verbose -upload -noexit -name globalweather -source C:\JDeveloper\mywork\SFE\outbound\globalweather\1.0.0.0.0\deploy\globalweather.ear -targets DefaultServer -adminurl t3://localhost:7101 -user weblogic -password ******** -deploy
weblogic.Deployer invoked with options: -debug -nostage -verbose -upload -noexit -name globalweather -source C:\JDeveloper\mywork\SFE\outbound\globalweather\1.0.0.0.0\deploy\globalweather.ear -targets DefaultServer -adminurl t3://localhost:7101 -user weblogic -deploy
[WebLogicDeploymentManagerImpl.<init>():115] : Constructing DeploymentManager for J2EE version V1_4 deployments
[WebLogicDeploymentManagerImpl.getNewConnection():158] : Connecting to admin server at localhost:7101, as user weblogic
[ServerConnectionImpl.getEnvironment():286] : setting environment
[ServerConnectionImpl.getEnvironment():289] : getting context using t3://localhost:7101
[ServerConnectionImpl.getMBeanServer():237] : Connecting to MBeanServer at service:jmx:t3://localhost:7101/jndi/weblogic.management.mbeanservers.domainruntime
java.io.IOException
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:196)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getMBeanServer(ServerConnectionImpl.java:238)
weblogic.deploy.api.tools.deployer.DeployerException: Unable to connect to 't3://localhost:7101': Bootstrap to localhost/127.0.0.1:7101 failed. It is likely that the remote side declared peer gone on this JVM. Ensure the url represents a running admin server and that the credentials are correct. If using http protocol, tunneling must be enabled on the admin server.
Retrieving Information about WebLogic Server:
Run
1. <WLHOME>/server/bin/setWLSEnv
2. java weblogic.Admin -adminurl t3://127.0.0.1:7001 -username weblogic -password weblogic1 PING 3 100
In case of exception smth like "Caused By: java.net.UnknownHostException: localhost"
add mappings of IP address to host name
127.0.0.1 localhost
For windows:
C:\Windows\System32\drivers\etc\hosts
Edited by: user6372268 on Dec 20, 2012 1:53 AM
Similar Messages
-
Container-Managed Transaction Type Attributes not working as expected
I am having a problem with the container-managed transactions not working as expected. I have 2 methods that work as follows:
MethodA{
for(a lot)
call MethodB;
@Transaction Type = RequiresNew
MethodB{
EntityManager Persist to database
I want the code in MethodB to be committed to the database when methodB returns. The problem is that I am running out of memory and MethodA is failing. When methodA fails after numerous calls to MethodB nothing is persisted to the database.
It is my understanding that when using requires new transactions that a new transaction is started for each call to the method and ends when the method returns while the calling method transaction is suspended.
How am I misunderstanding the requiresNew transaction attribute. What can I do to make a batch insert into my database that will not run out of memory (commit when a methodB returns)?
Thanks in advance.The problem is that EJB invocation semantics for security, container-managed transactions, etc.
only apply when an invocation is made through an EJB reference. In your case, you are directly
invoking the implementation method from within the bean. The EJB container has no idea that's
happening. It's no different than invoking a utility method.
In order to get the behavior you'd like, you need to retrieve a reference to your own bean and invoke
through that. You can use SessionContext.getBusinessObject() to get the EJB reference for the
business interface through which the method in question is exposed.
--ken -
UpsertDocumentAsync not working as expected
I'm using UpsertDocumentAsync to either insert or update a document, but it doesn't seem to work as expected. When I use it either inserts / creates or
replaces the document. I doubt I'm calling it wrong?
await client.UpsertDocumentAsync(documentsLink, this.document);
Working as expected (but with incorrect name) or not working as expected?
Regards,
Joakim
Joakim Rosendahl Consultant at OnTrax AB, Sweden.Found this one (doesn't contain the work PATCH though)
http://feedback.azure.com/forums/263030-documentdb/suggestions/7075256-provide-for-upsert
Voted for that one, but it doesn't seem like the developer community is interested in upsert/patch functionality =/.
Joakim Rosendahl Consultant at OnTrax AB, Sweden. -
Why doesn't doFilter work was expected when a .jsp page is accessed?
I'm hoping an expert could point me in the right direction or tell me
if this is a bug in WebLogic.
My environment is WebLogic 6.1 (service pack 4), on Windows 2000.
I need to capture all the response data that comes back from the
servlet. So, I have a simple filter that wraps the response object,
and sends the wrapped object into filterChain.doFilter() method.
I've set up the web.xml so that any servlet access should trigger my
filter (the <url-pattern> is /*). I've also configured a sample
web-app called TEST to serve .html/.jsp pages.
When the browser makes a .html request, everything works as expected.
After the filterChain.doFilter(), I can take a look at the wrapped
response object and print the contents of the response.
However, when I access a .jsp page as part of form data submit, the
output stream of my wrapper is empty after the filterChain.doFilter()
completes.
If I don't wrap the response, then everything seems to work fine. The
.jsp gets interpreted properly by the servlet container, I can see the
result page in the browser just fine.
By inserting debug statements, I can see that if I wrap the responses,
for a .html request, under the covers, wrapper's getOutputStream()
gets called. But for a .jsp request, under the covers, wrapper's
getWriter() gets called. I don't know how significant this is, but
this is the only difference I see!
If I don't wrap the response, I am not sure how to get at the response
data. All I need to do is to take certain actions depending on the
response. That is why I'm using a wrapper to get at the response data.
In the JRun AppServer, the code just works fine.
I've enclosed the source code & the output that demonstrates the
problem.
What am I doing wrong? Or, is this a bug in WebLogic? If this is a
bug, is there a patch available?
Thanks,
--Sridhar
// HeaderFilter.java
// This is the filter that gets invoked through the web.xml
configuration
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class HeaderFilter implements Filter {
public FilterConfig filterConfig;
public void destroy() {
this.filterConfig = null;
public void init(FilterConfig filterConfig) {
this.filterConfig = filterConfig;
public FilterConfig getFilterConfig() {
return filterConfig;
public void setFilterConfig(FilterConfig filterConfig) {
this.filterConfig = filterConfig;
public void doFilter(ServletRequest req, ServletResponse resp,
FilterChain chain)
throws java.io.IOException, javax.servlet.ServletException {
ServletContext context = filterConfig.getServletContext();
HttpServletResponse response = (HttpServletResponse)resp;
TestResponseWrapper wrapper = new
TestResponseWrapper(response);
chain.doFilter(req, wrapper);
OutputStream out = resp.getOutputStream();
System.out.println("The content length is :" +
wrapper.getContentLength());
if ("text/html".equals(wrapper.getContentType())) {
byte[] data = wrapper.getData();
System.out.println("TEXT RESPONSE, length is " +
data.length);
System.out.println(new String(data));
out.write(data);
// out.close();
// TestResponseWrapper.java
// This class wraps the response object so that you could take a look
at
// the response contents after the filterConfig.doFilter() method
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpServletResponseWrapper;
import java.io.ByteArrayOutputStream;
import java.io.PrintWriter;
public class TestResponseWrapper extends HttpServletResponseWrapper{
private ByteArrayOutputStream output;
private int contentLength;
private String contentType;
public TestResponseWrapper(HttpServletResponse response) {
super(response);
output = new ByteArrayOutputStream();
public ServletOutputStream getOutputStream() {
System.out.println("****** getOutputStream() called *******");
return new FilterServletOutputStream(output);
public byte[] getData() {
return output.toByteArray();
public PrintWriter getWriter() {
System.out.println("****** getWriter() called *******");
return new PrintWriter(getOutputStream(), false);
public void setContentType(String type) {
System.out.println("**** Wrapper setContentType called ****");
this.contentType = type;
super.setContentType(type);
public String getContentType() {
return this.contentType;
public int getContentLength() {
return contentLength;
public void setContentLength(int length) {
System.out.println("**** Wrapper setContentLength called
this.contentLength=length;
super.setContentLength(length);
// FilterServletOutputStream.java
// This class is used by the wrapper for getOutputStream() method
// to return a ServletOutputStream object.
import javax.servlet.ServletOutputStream;
import java.io.DataOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import java.io.*;
public class FilterServletOutputStream extends ServletOutputStream {
private DataOutputStream stream;
public FilterServletOutputStream(OutputStream output) {
stream = new DataOutputStream(output);
public void write(int b) throws IOException {
stream.write(b);
public void write(byte[] b) throws IOException {
stream.write(b);
public void write(byte[] b, int off, int len) throws IOException {
stream.write(b, off, len);
// test.html
<html>
<head>
<meta http-equiv="Content-Type"
content="text/html; charset=iso-8859-1">
<title> Web Posting Information </title>
</head>
<body>
<form name="myform" method="POST" action="resource.jsp">
<input type="TEXT" name="input"></input>
<br>
<input type="SUBMIT" value="done"></input>
</form>
</body>
</html>
// resource.jsp
// This gets referenced by the test.html file
<HTML><BODY>
<head>
<title>JRun Programming Techniques</title>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
</head>
<body>
<H3>Secure Resource Page</H3>
<p>This is a secure page.</p>
<BR><B>User: </B>
<%
// out.write(request.getParameter("input"));
%>
</BODY></HTML>
// HERE IS THE OUTPUT
// HERE IS WHAT I SEE WHEN I ACCESS
// http://localhost:7001/TEST/test.html
**** Wrapper setContentType called ****
**** Wrapper setContentLength called ****
****** getOutputStream() called *******
The content length is :331
TEXT RESPONSE, length is 331
<html>
<head>
<meta http-equiv="Content-Type"
content="text/html; charset=iso-8859-1">
<title> Web Posting Information </title>
</head>
<body>
<form name="myform" method="POST" action="resource.jsp">
<input type="TEXT" name="input"></input>
<br>
<input type="SUBMIT" value="done"></input>
</form>
</body>
</html>
// HERE IS WHAT I SEE WHEN I enter some value in the "input" field
// of the form, and click on the "submit" button.
// Why isn't setContentLength() getting called on the wrapper?
// It appears as if the wrapper's output stream isn't getting used
// at all!!!
**** Wrapper setContentType called ****
****** getWriter() called *******
****** getOutputStream() called *******
The content length is :0
TEXT RESPONSE, length is 0
If someone else runs into this, here is how I solved the problem -
If you create a PrintWriter object with the autoflush option, it
doesn't flush the underlying buffer till you call println on it. I
looked through the generated code for the servlet, and it was doing a
JSPWriter.print() to output information.
So, I changed the ResponseWrapper to keep a handle to the PrintWriter
object, and then flush it in the filter, and that works.
Why the same code behaves differently in JRun & Weblogic, I'm not sure
--Sridhar
-
Data Quality tab for migration isn't working as expected.
I was doing a test migration from DB2 (9.7) database to Oracle 11g using SQL Developer Version 3.2.20.09 Build MAIN-09.87. I found that the Data Quality tab for record count comparison from migration project wasn't working as expected.
It’s not showing the record count from source database. It is showing following error in logging page after every refresh. It is happening because tool is populating SOURCENAME as "DB2"."SCHEMANAME"."TABLENAME" whereas the SOURCENAME should be consist of schema name and table name only. I have gone through the MD_META package and Database views, which are written for repository and found that its appending catalog name in case of source database is DB2.
Is this a known issue? Do we have fix available? I think we need a change in QUOTE function of MD_META package and DB views. Please suggest.
SEVERE 1377 2 oracle.dbtools.db.DBUtil Warning, unhandled exception: DB2 SQL error: SQLCODE: -204, SQLSTATE: 42704, SQLERRMC: DB2.CDSWEB.PRODUCTLICTYPEHello,
Is this a known issue?
Yes, it is a known issue. Bug 11778359: DB2:RUN DATA QUALITY REPORT GET UNHANDLED EXCEPTION: DB2 SQL ERROR
The bug is unpublished so you can't see it in My Oracle Support, I just mentioned it for reference.
Do we have fix available?Not yet. A fix shall be available in a future version of SQL Developer. Don't ask me in which one and when, I have no idea.
I think we need a change in QUOTE function of MD_META package and DB viewsI don't agree. I don't know what might break if you manipulate that package.
Sorry that I have no better answer.
Best regards
Wolfgang -
My problem is pretty easy to reproduce.
I created a project from scratch with a view model.
As you can see in the setter of "Age" property I have a simple logic.
public class MainViewModel : INotifyPropertyChanged
public event PropertyChangedEventHandler PropertyChanged;
private int age;
public int Age
get
return age;
set
/*Age has to be over 18* - a simple condition in the setter*/
age = value;
if(age <= 18)
age = 18;
OnPropertyChanged("Age");
public MainViewModel(int age)
this.Age = age;
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
In the MainPage.xaml
<Grid x:Name="LayoutRoot" Background="White">
<TextBox
Text="{Binding Path=Age, Mode=TwoWay}"
HorizontalAlignment="Left"
Width="100"
Height="25"/>
<TextBlock
Text="{Binding Path=Age, Mode=OneWay}"
HorizontalAlignment="Right"
Width="100"
Height="25"/>
</Grid>
And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
public partial class MainPage : UserControl
private MainViewModel mvm;
public MainPage()
InitializeComponent();
mvm = new MainViewModel(20);
this.DataContext = mvm;
I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
Case 1: Debugger is attached =>
TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
Case 2: Debugger is NOT attached =>
TextBox value will be "18" and TextBlock value will be "18" - CORRECT
It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
Has something changed in SL5 and logic in setters is not allowed anymore?
Configuration:
VisualStudio 2010 SP1
SL 5 Tools 5.1.30214.0
SL5 sdk 5.0.61118.0
IE 10
Thanks!Inputting the value and changing it straight away is relatively rare.
Very few people are now using Silverlight because it's kind of deprecated...
This is why nobody has reported this.
I certainly never noticed this problem and I have a number of live Silverlight systems out there.
Some of which are huge.
If you want a "fix":
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
//PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
Storyboard sb = new Storyboard();
sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
sb.Completed += delegate
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
sb.Begin();
The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML -
Read Key and Write Key not working as expected with paths on RT
The configuration file VIs Read Key (Path) and Write Key (Path) don't seem to work as expected (at least not as I was expecting them to) on an RT target.
When working on my WinXP PC with these two VIs, paths are translated to what looks like is supposed to be a device-independent format before being written to disk. The path C:\dir\file.txt becomes /C/dir/file.txt when writing and vice versa when reading. On my RT target, however, that same path is written to disk as C:\dir\file.txt, unchanged from the native format.
The translaton of a native path to and from the device-independent format appears to be the responsibility of Specific Path to Common Path and Common Path to Specific Path. These both use the App.TargetOS property to determine the operating system. In the case structure for these two VIs, however, there is no case for PharLap or RTX. (My RT hardware is runnng PharLap; I don't know enough about RTX to comment.) This means that the results of String to Path or Path to String are used without translating between the device-independent format to the native path format.
This isn't a problem if you create a configuration file on one machine and use it on that same machine. I noticed this only when tranferring a config file from my PC to the RT target, where the target would not open the file paths it loaded from the configuration file.
This occurs on 7.1.1 and 8.0. I don't have 8.20 to see if happens there, too.In LV 8.2, this was fixed.
The problem is App.TargetOS returns "Pharlap" on RT systems, and "Pharlap" is handled by the default case ("invalid OS target") in LV 8.0. In LV 8.2 the default case is "Windows 95/NT", however. The reason you could write and read an .ini file on RT in LV 8.0 and earlier is because these two VIs (listed below) were both running the default case of "invalid OS target".
vi.lib\Utility\config.llb\Common Path to Specific Path.vi
vi.lib\Utility\config.llb\Specific Path to Common Path.vi
As you saw, this fails when you perform one operation in Pharlap but the other in Windows. You can fix this by modifying the two VIs listed above. Just go to the case structure and make "Windows 95/NT" the default case. -
Windows - Use system proxy settings not working as expected
Hi everyone,
I have a bit of an issue that I could use some help with. We currently have remote users that utilize an SSTP VPN connection to access our internal network. Once connected, those users are required to use an internal proxy server to connect to the Internet. The proxy server is Microsoft's TMG and utilized domain authentication.
On our remote Windows clients we have their Internet Options configured to utilize a proxy as follows:
Internet Options -> Connections -> LAN Settings -> No proxy configured at all
Internet Options -> Connections -> Highlight SSTP Connection -> Settings
Use a proxy server for this connection -> IP/Port of Proxy Server
Firefox and Chrome are both configured to use system proxy settings.
Here is my process to demonstrate the issues:
Remote client workstation is rebooted.
With the above configuration just after a reboot, a remote user that is not connected to the VPN can browse the Internet with Internet Explorer, Chrome, and Firefox. None of the browsers prompt for credentials.
A remote VPN connection is then established.
FF is opened and HTTP connections utilize the proxy server. However, HTTPS connections do not use the proxy server, but instead attempt to use the default gateway. FF does not prompt for credentials. FF is closed.
Chrome is opened and can access both HTTP and HTTPS sites without issue. No credential prompt. Chrome is closed.
IE is opened and can access both HTTP and HTTPS sites without issue. No credential prompt. IE is closed.
Here's where it gets weirder...
FF is then reopened. The VPN connection is still up. FF will prompt for credentials. Domain credentials are supplied and FF can now utilize the proxy for both HTTP and HTTPS connections. FF is closed.
VPN is disconnected.
FF is opened and cannot access the Internet as it is still trying to use the proxy server. FF is closed.
IE is opened and can access the Internet. IE is closed.
Chrome is opened and can access the Internet. Chrome is closed.
FF is reopened and can now access the Internet. FF is closed.
In summary, in the above scenario FF acts in an unexpected manner with regards to proxy usage when "use system proxy settings" is applied. However, Firefox begins acting as expected after IE is opened and closed. For example, connect to VPN, open IE, close IE, open FF, and everything works accordingly. Disconnect the VPN, open IE, close IE, open FF and everything works as expected.
Any insight you can provide would be appreciated as it is affecting our FF users and the sooner we can achieve resolution the better. As a note, we've also worked through this issue with WPAD and proxy auto-detect. I've intentionally removed these from the equation to simplify troubleshooting.
ThanksQuick update. Added to a previously filed bug. Looks like it's assigned now so maybe we'll see a fix for this soon.
https://bugzilla.mozilla.org/show_bug.cgi?id=563169 -
Subtraction of two key figures normalized to result not working as expected
Hello SAP Community!
I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
In order to explain the problem I am facing please analyze below text:
1) Let's assume I have below data:
LOAD MONTH PLANT MATERIAL HORIZON MONTH FORECAST UNITS
200805 PLANT-A MAT-1 200805 510,235.00
200805 PLANT-B MAT-1 200805 74,240.00
200805 PLANT-A MAT-1 200806 438,721.00
200805 PLANT-B MAT-1 200806 74,240.00
200805 PLANT-A MAT-1 200807 356,981.00
200805 PLANT-B MAT-1 200807 74,240.00
200806 PLANT-A MAT-1 200805 0.00
200806 PLANT-B MAT-1 200805 0.00
200806 PLANT-A MAT-1 200806 510,235.00
200806 PLANT-B MAT-1 200806 74,240.00
200806 PLANT-A MAT-1 200807 438,721.00
200806 PLANT-B MAT-1 200807 74,240.00
2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Comparison Units (June 2008) 510,235.00 438,721.00
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Comparison Units (June 2008) 74,240.00 74,240.00
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
we normalize forecats to results an we get the below report:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Base Units % (May 2008) 85.527% 85.527%
Comparison Units (June 2008) 510,235.00 438,721.00
Comparison Units %(Jun 2008) 87.298% 82.784%
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Base Units % (May 2008) 14.473% 15.702%
Comparison Units (June 2008) 74,240.00 74,240.00
Comparison Units %(Jun 2008) 12.702% 17.216%
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
units, for both number of units and %. The report now look as below:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Base Units % (May 2008) 85.527% 85.527%
Comparison Units (June 2008) 510,235.00 438,721.00
Comparison Units %(Jun 2008) 87.298% 82.784%
Delta base vs. comp. units % 1.77% 2.74%
Delta base vs. comp. units 71,514.00 81,740.00
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Base Units % (May 2008) 14.473% 15.702%
Comparison Units (June 2008) 74,240.00 74,240.00
Comparison Units %(Jun 2008) 12.702% 17.216%
Delta base vs. comp. units % -1.77% -2.74%
Delta base vs. comp. units 0.00 0.00
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
5) PROBLEM:
In my report, the "Delta base vs. comp. units %" is not working as expected and
calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
So my report looks as follows:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Base Units % (May 2008) 85.527% 85.527%
Comparison Units (June 2008) 510,235.00 438,721.00
Comparison Units %(Jun 2008) 87.298% 82.784%
Delta base vs. comp. units % 71,514.00 81,740.00 <<<WRONG!!
Delta base vs. comp. units 71,514.00 81,740.00
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Base Units % (May 2008) 14.473% 15.702%
Comparison Units (June 2008) 74,240.00 74,240.00
Comparison Units %(Jun 2008) 12.702% 17.216%
Delta base vs. comp. units % 0.00 0.00
Delta base vs. comp. units 0.00 0.00
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
The formulas are:
a) Delta base vs. comp. units %
Delta base vs. comp. units % = Comparison Units % - Base Units %
b) Delta base vs. comp. units
Delta base vs. comp. units = Comparison Units - Base Units
The KFs
- Comparison Units %
- Base Units %
Are RESTRICTED key figures (restricted to Base and comparison month variables) which
are setup as:
1) Calculate Result As: Summation of Rounded Values
2) Calculate Single Value as: Normalization of result
3) Calculate Along the Rows
The KFs
- Delta base vs. comp. units %
- Delta base vs. comp. units
are FORMULAS setup to:
1) Calculate Result As: Nothing defined
2) Calculate Single Value as: Nothing defined
3) Calculate Along the Rows: user default direction (grayed out)
Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
Any help is highly appreciated.
Thank you.
MarioHi,
The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
I hope this will solve your issue.
Regards,
S P. -
Credit Check Failure not working as expected -- 11.5.10.2
Hi,
We have setup Credit Check calculation at Sales Order Header level.
This is working as expected when the Sales order is Booked, Credit Check Failure hold is applied when its eligible.
But if one the of lines belonging to a separate Ship set of Sales order is Shipped and Closed and other line is open.
Any changes on the Lines that are Open is not placing the hold in the Sales Order.
We need Credit Check Validation to happen any changes in the Price or Quantity of any SO line even if other lines are Shipped/Closed and the hold needs to be placed at Sales Order header.
Any suggestions to change the setup or any other workaround on this would be appreciated?
Thanks,
Praveen1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng -
Events in SubVi not working as expected
Hi, I am reposting this question as my previous one didn't resulted in any satisfactory conclusion.
I have attached my Vi's which are not working as expected. If I remove ONE subVi and its associated 3 controls and two indicators, the other one works just fine, but when I add two SUB Vis, it goes messy. I am trying to learn this way, I am sure it can be done many other ways, but please help me finding out the problem doing it this way as in my final MainVi, I would like to use 8 such sub Vis. Thanks.
Solved!
Go to Solution.
Attachments:
Main.vi 11 KB
SubVi.vi 12 KB
SubVi_2.vi 15 KBYour main problem is DATA FLOW. A loop cannot iterate until EVERYTHING in it has completed. So, as you have it, you have to have both event structures execture before you can go back to look for the next event. So if you insist on having these subVIs, they need to be in seperate loops.
BTW, you can get away with a single subVI. Go into the VI properties and make it reentrant (preallocated clone). Then each call of your subVI will have its own memory space. A lot easier to maintain that way.
And I know you said you didn't want alternatives, but here's how you can do it all with a single event structure in your main loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Main_MODTR.vi 10 KB -
AFS ARUN Size Substitution Not Working As Expected
Hi All,
I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids.
I have setup some examples but it does not work as expected.
Here is a small example:
Say I have a size 28/30, 28/32 .........29/30....
What I want to achieve is that during ARUN if there is a shortage of stock in 28/30 then the remaining requirement qty should be confirmed from size 28/32.
with my setup after 28/30 it goes into looking for stock in 29/30, which is what I do not want.
Any inputs will be really appreciated.
Thanks!!srdfrn wrote:
Hi YOS,
I tried importing a PCX image into CVI 2010 and then sizing the image to the control and didn't see the behavior you have been describing. Would you mind posting an example (alongside an image file) that demonstrates this?
Also, one thing I noticed is that PCX images appear to be quite dated. Could upgrading them to a JPEG or PNG format be an option for you?
Thanks,
Stephanie R.
National Instruments
Stephanie, thanks for the reply.
I am very sorry to state that I made a mistake.
VAL_SIZE_TO_IMAGE indeed works.
What fails to work is VAL_SIZE_TO_PICTURE. (Second option in Fit Mode attribute in control editing panel)
I tried with JPEG and it's the same.
I am attaching an example.(Load_Image.c & ONEP_3Trow_POS1.JPG)
A panel with two picture rings.
- SW_1 remains at the intended size and the loaded picture is not clear.
- SW_2 will fit to picture size and looks OK.
Appreciate your support,
YOSsi Seter
Attachments:
Load_Image.c 2 KB
ONEP_3Trow_POS1.JPG 4 KB -
Popup KEY LOV in Interactive Report not work as expected
Hello,
in an Interactive Report, i have added in a Region a Popup Key LOV (Displays description, returns key value). This LOV works ok in other Forms. But in the Report item (Session State variable) instead of returning the Return Value of the LOV, it returns the Displayed Value (inspected the Session). How can i make it work as expected ?
TIAAt the moment, i am ok with all the functionality of the IR, which is finished. What i want is to use some extra items on the upper part of the page that aid the user to restict in large part the IR query result. Some of these are ideal candidates for LOVs - I want LOV to diplay the Display values and after user selection to return the Return value, either to page item or to other variable. How can i achieve this? Any idea? So far the LOV returns the display value in the Item AND session corresponding variable.
-
Images in Multicolumn Listbox doesn't work as expected
In the attached example, the symbols are getting displayed in the correct order but missing the symbol for the first row. I can manually select the symbol but by default only the 2nd symbol from the provided array list appear.
Any idea what's the issue?
How to display correct symbol?
Thanks in advance.
Cross-post from LAVA: http://lavag.org/topic/15788-images-in-multicolumn-listbox-doesnt-work-as-expected/page__pid__95584#...
Solved!
Go to Solution.
Attachments:
Images & Multicolumn ListBox.vi 10 KBHello, Vidula
It seems that index 0 is reserved for the empty symbol, no matter what custom symbol you provided. Adding one image in front before setting symbols array and incrementing ItemSyms indexes solves this problem. However, I can't find any information about this in documentation, which would be nice
Attachments:
Images & Multicolumn ListBox.vi 12 KB -
Notification "Launch the app and go to the library" not working as expected
Hello,
we are sending notification "Launch the app and go to the library" - but it's not working as expected, it's still just launching app with last open folio.
Whats wrong there? Do we need v30 app? We have V29, but this is not mentioned in documentation.
Thanks
MartinAh.
Ok, now it's clear.
Anyway i would appreciate possibility to force viewer to switch to library view after new issue is detected, even without notification. Quite often requested feature - "there is new cover in Newsstand, but customer don't know how to download new publication easily".
Martin
Maybe you are looking for
-
I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to
-
How to create Logon groups for JAVA Systems
Hi, I am implementing an BI JAVA Landscape. We do have 1 Central Instance(CI) and 2 Dialog Instances (DI) JAVA Standalone. Everything based on NW04s I have set up a Web Dispatcher to do a load balancing. The Web Dispatcher is connected to the Message
-
Oracle 9i Trigger not updating first time through
Hi, I have read a lot of postings but this one seems to be unique. I am trying to update using from Access to Oracle backend database with a Trigger. When I put the code from the update in a test window in the PL/SQL, I step through the code and it d
-
I have cropped a clip and now want to take other footage from the discarded remains of the clip. But the discarded footage is not in my iMovie trash. Where did it go? And how do I rescue it so I can edit the other short clips from it that I need?
-
Can I keep iOS 7 from turning off my Wifi when screen locks
can I keep iOS 7 from turning off my Wifi when screen locks?