WLPASS.EXE error on Windows XP HOME
Can I install Weblogic Server 5.1.0 on Windows XP Home??.......I am getting installed but not working........
I am getting WLPASS.EXE error......
please help me in this....
Thanks
Laxman
NO. Support for XP was not available until this year, in the newer releases.
In addition, you have to watch the Home vs Pro versions. Check the documentation
section on certified configurations.
Wayne Scott
laxman wrote:
Can I install Weblogic Server 5.1.0 on Windows XP Home??.......I am getting installed but not working........
I am getting WLPASS.EXE error......
please help me in this....
Thanks
Laxman
Similar Messages
-
Blue Screen Error for Windows 7 Home Basic 64 Bit
I have a Sony Vaio E Series with WINDOWS 7 64bit home basic preinstalled. It worked perfectly fine for 2 yrs until last month, I needed to replace the hard drive due to bad sectors. Now, after a month of replacing my hard drive fresh from
Sony Center, I decided to do a dual boot (install another OS - Windows 8.1 pro) on a separate partition. Everything is averagely fine. But 2 nights ago, I encounter a blue screen error for WIN 7 (my pre installed one). It happened the second time, so I started
it in safe mode and did a system restore. I don't know if it will prevent future occurence of blue screen, but to make sure, I reinstall my factory default drivers using Vaio CARE... Pls help.
PS: I have not encountered BLUE SCREEN error in Windows 8.1 yet. Is it OS specific? Here's the error the second time, it happened on my Windows 7:
Blue screen error for Windows 7 home basic
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.2
Locale ID: 13321
Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002EE6B80
BCP3: FFFFF880035F4DC8
BCP4: FFFFF880035F4620
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\083014-31964-01.dmp
C:\Users\GARIBALDI\AppData\Local\Temp\WER-76456-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtHi Garibaldi11,
If you are not equipped to debug this problem, you should use some basic troubleshooting techniques.
•Make sure you have enough disk space.
•If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
•Try changing video adapters.
•Check with your hardware vendor for any BIOS updates.
•Disable BIOS memory options such as caching or shadowing.
Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
http://msdn.microsoft.com/en-us/library/windows/hardware/ff559239(v=vs.85).aspx
Bug check 0x1000007E has the same meaning and parameters as bug check 0x7E
Alex Zhao
TechNet Community Support -
Explorer.exe error on windows 8 with blank message and a yellow warning with ok button
Whenever i boot my laptop the attached screenshot is always popping up, it shows a window with "Explorer.exe" with a yellow warning sign and a "OK" button.
ok, I found a possible solution here:
[FIX] Getting “Explorer.exe” Error On Windows 8 Start Up
http://www.kapilarya.com/fix-getting-explorer-exe-error-on-windows-8-start-up
Open regedit.exe, go to
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
and delete the highlighted string "Load". This should fix the issue.
"A programmer is just a tool which converts caffeine into code" -
The User Profile Service service failed to Login user Profile error in Windows 7 Home Premium
Hi,
I recently purchased a new Dell Inspirion 1564 Laptop which had Microsoft Windows 7 Home Premium 64-bit installed.
The hardware configuration is i5 core Processor, 4GB Ram , 320GB HDD and 512MB Graphics card.
Today morning, I couldn't login as the system returned the following error after I entered the password.
"The User Profile Service service failed to login.
User Profile cannot be loaded"
I couldn't login at all as i had not created any other user account, even the face recognition didn't work.
I had to restore my pc to the previous state. I believe this happened after the installation of Windows Malicious Software Removal Tool x64 - March 2010 (KB890830) update, not immeditately though as i used the system few times after the installation of this update.
Is this a bug? I cant imagine if this happens if I am about to give a presentation, its going to be disastrous!
Any help is appreciated
AvinashI'm getting the same issue - I'm the IT Manager at a school where every student has a laptop (fujitsu tablet T4410). This occurs to at least one new student every day. I have been unable to re-create the issue on demand, although I suspect it occurs when a temporary user profile gets created after the logon process takes too long (due to some disk activity, possibly related to windows updates or some thing). When we were creating student accounts on the machines, this would occur if we attempted to log in the newly created account before the computer had 'settled down' - it seems that there is a logon timeout, after which something stops working. If the new user's first logon happened too soon after booting, the profile would be corrupted. But this doesn't quite explain why it occurs seemingly randomly now.
My current solution is to boot into safe mode, back up the user's files, delete the account, create it again (the other suggested solutions on the internet did not work)
If you're desperate, you can log in while in safe mode, and use that to create a new account.
In any case, this is proving a very bad experience of Windows 7 for my students, and I hope to see a more useful fix for this soon. -
I simply want to uninstall Mozilla FireFox 3.6.3. I tried both recommendations of using the control panel to add/remove program and running the helper.exe in Program Files/Mozilla FireFox/uninstall. I am running Windows 7 Home Premium Edition(64bit). When I tried to remove it using the add/remove program and helper.exe all it does is start for a split second(mouse pointer turns into circular loading icon) and then it stops.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7Hi Guys,
I had this same problem too, and i want to share to all of you my own fix for this kind of problem;
(READ FIRST: ''This step will wipeout everything that mozilla saved on your computer including : password, history and bookmarks''.)'''
'''1. download the Revo Uninstaller''''''
- quick step guide for this:
select mozilla firefox, don't forget to uninstall everything that relates to mozilla including registry to clean them all up.
'''2. download mozilla firefox again'''
- AND REINSTALL. however on this stage, in some cases mozilla will not open at this stage.
'''3. Uninstall Mozilla firefox again NOW using control panel.'''
'''4. Restart the computer to refresh everything.'''
'''5. Reinstall mozilla firefox again, once you have received the prompt for "exporting or importing etc.. etc.. from Microsoft" that means its already working.. it will take around 5-10 sec to load up (in my case) .''' -
Gwes.exe error on Windows Mobile 5.0
I keep getting a gwes.exe error while running my app built using LabVIEW for PocketPC 8.0.1. What is it? How can I debug this?
RobertHi Robert,
This seems like a windows issue. After a quick Google search I found many links which explain what GWES is (http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wceshellui5/html/wce50conShellandUs...), and many people who encountered similar errors with different applications. Since the GWES stands for Graphics, Windowing, and Events Subsystem, I was wondering if you can correlate the crashes with anything in you program that has to do with using a graph, or event structure, etc.
You may want to read some of the posts online in case one of them is similar to your issue.
Regards,
AG -
ARM.exe error on Windows 8.1
ARM.exe error after updat from windows 8 to windows 8.1; sensapi is not suitable for windows or contains a fault?
error code 0xc000012fI also get this error after upgrading to windows 8.1 along with Sensapi.dll No one on any boards gives me a fix.. Just standard answers of refresh windows or reinstall windows.
Why would i do that if the problem only exists on Adobe? When I X out the error messages Abobe works well?
This is just annoying constantly closing out these 2 error messages which have no effect on adobe.. -
Bootmgr missing error for windows 7 home basic
Hi;
I want to restore my laptop to the factory setting because all the network drivers are currupted and could not fix the laoptop. but i attempt to restore to factory setting i am fascing the bootmgr missing error...i do not have any bootable cds..
following are the details of my laptop:
Os: window 7 home basic
Model notebook: HP pavilion dv6 notebook PC
system board ID: 1658
Processor type: intel(R) core(TM) i5-2430M CPU @2.40GHZ
any help will be appriciated
regards
khalid khan
This question was solved.
View Solution.When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
Please indicate if the system recovery ran and completed or you were unable to even initiate the recovery. depending on the exact issue, you may be able to repair the "bootmgr missing" error using a Windows 7 installation DVD. If you need a Windows SP1 disc, please see "How to Install Windows 7 Without the Disc" to download and create your own. If you have created this disc, you can boot from it and select "Repair" to attempt to fix the current issue.
Select Repair Your Computer. After several screens you will arrive at choices. Select Command Prompt. Type bootrec /RebuildBcd. Next type Exit
Select 'Startup Repair' and allow it to run. Restart the laptop.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
I purchased a new notebook with Windows 7 in October. During the first weeks I uninstalled McAfee and replaced the harddrive. Since November Windows Update fails with error messages and defender does not start anymore. I made several virus scans (complete) with multiple antivirus programs but nothing showed up.
Since it took my days to install various software, I do not want to re-install W7. I also have no good backup that I could restore.
I am really surprised that there is not even a single entry regarding the error code in the Microsoft Knowledge base or elsewhere.
I really would appreciate help.I hit this same problem... I spent days trying to figure out what went wrong. MS advise of doing; Windows7 re-installs, BIOS/firmware updates, drivers changed, etc etc etc.
I installed a new(large) SEAGATE Momentus XT hybrid 750GB SATA drive upon newly purchased notebook, but the twist here is between the storage configuration mode in the BIOS, ATA vs. AHCI. See, the DELL BIOS required to configure my laptop storage for AHCI
mode, because I had the 4GB Intel Flash Cache Module (Turbo Memory) installed on the DELL Precision notebook. The Flash Cache is installed internally in the mini-pcie slot, loaded the Intel storage drivers, and when it works, is an outstanding feature which
supports:
Windows ReadyDrive*
Windows ReadyBoost*
Looking at the details of the Intel storage drivers that support the INTEL TURBO MEMORY, they're from 2009. Of course it was recommended by users to install these drivers first before anything else, so it would function best, but this was part of the
cause to all the problems with Windows 7. I've provided links to Intel Flash Cache info for those interested. Unfortunately, loading the HP/Intel Storage drivers fixes the Windows permissions/update problems, but "Breaks" the Intel Turbo Flash Cache
functionality now, even though Microsoft still supports ReadyDrive in Windows 7.
"Intel® Turbo Memory is a primary PC component, along with the CPU, chipset, and system memory. It caches large amounts of frequently used data or user selected applications for faster access by the processor. This decreases the need for hard-disk accesses,
saving both time and power, which equates to increased performance and energy efficiency. That's good news for users who run data-intensive software like media applications. It's also a good match to the substantial system requirements to load and run Windows
Vista*.
Intel Turbo Memory is a single solution that accelerates data transfer both to and from the processor."
Intel discontinued support for the modules or drivers with the marketing move to producing their own SSD storage drives.
WIKI: http://en.wikipedia.org/wiki/Intel_Turbo_Memory
INTEL page: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396715.htm
Intel Drivers/Support Turbo Memory: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396719.htm
For me, I hit all the symptoms everyone else hit and thanks to humphrey for his find. I just wish Microsoft/Intel would get together and fix this Windows 7 issue between SW/HW; Large Drive Sizes, Licensing/Permissions, Flash Memory, ATA vs. ACHI, BIOS, etc.
There's been an incredible amount of loss productivity, resources, and costs incurred on this one ISSUE by everyone involved.
Intel Member login for Mobility Turbo Memory Flash Cache pdf: http://www.intel.com/cd/channel/reseller/asmo-na/eng/products/mobile/mprod/turbo_memory/394947.htm -
How do you repair ntoskrnl.exe error or system error in windows server 2008 and 2012
hi,
can you repair system file errors like ntoskrnl.exe in windows server 2008 and 2012 like like before in windows server 2003 ?
the steps were repairing ntoskrnl.exe error in windows server 2003
1- have a 2003 cd and from that cd start recovery console and copy from i386 directory ntldr and ntdetect.com to windows /system32 directory on the server and then repairing
2- MBR with fixmbr command and then rebuild BOT.INI file with bootcfg/rebuild .
now my question is how you repair or solve such problem with ntoskrnl.exe error in windows server 2008 and windows server 2012
thanks
johan
h.davidfirst this wil take a lot of time for windows 2008 and 2012 ,
and what about windows 2003 I thing this has no startup repair
thanks
johan
h.david
What will take a lot of time? Repair or clean install? These days one can standup a new VM and have an operating system on it in around 20 minutes or so.
Correct server 2003 is file based deployment and completely different OS from repair perspective as well.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Dreamweaver CS3 hangs on "initializing files" in Windows Vista Home Premium
Hi,
Anybody else encountering this issue? I noticed this7 error
in Windows Vista Home Premium. When you launch Dreamweaver CS3, it
opens the splash screen, displays “initializing files”
and thats it.
Necessary Troubleshooting steps we’re already done to
attempt to launch/fix the program but to no avails.
seems the problem happens on acer computers with 4 gigs of
ram.
You can check it from this
Thread
Thanks! I hope someone from engineering can take a look at
this issue!A little more on this topic with solution ...
http://sidapolinario.unicpinoy.com/2008/05/09/dreamweaver-cs3-some-emmerging-issues/
Regards.
Patrick. -
Does anyone know how to fix this?? itunes.exe error error7 windows error 126
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Jrew.exe error while installing oracle9i on windows vista home premium
Hi,
While installing oracle 9i database on windows vista home Premium editon i get Error jrew.exe has stopped . Can anyone help me to proceed with the installation.
Thanks
SreeDuplicate post:
Error JREW.EXE stopped working while installing oracle 9i on windows vista
(Unfortunately nothing has changed in the last 30 minutes). -
Hollie**it!
I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit. I tried to update iTunes Trice Now. This is what I get: Runtime error! Program: C:\Program Files (x86)\iTunes\iTunes.exe. R6034 An application has made anHello there, Vinnie.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Error message in windows vista home premium
I was installing a driver package...from microsoft corporation when this window showed up.
(some folders cannot be accepted because "skip system and application folders" option enabled}
I can't find any information on the net or microsoft on How to fix the problem..Any suggestions would be greatly Appreciated it.....
Thank You!thank you ed
but i think the whole operating system could be compromised(windows vista home premium)
actually these are drivers for a printer scanner fax copier from brother...but nothing is helping.....
I ran it as an Administrator..but either i get the message above or this error(difx driver package install error=1610154566.the exe's are 295-INST-A.EXE and 375-USB2KXPVISTA-32-A-US.EXE downloaded from Brother site...I don't know.Maybe i shall re install
the all operating system....this computer was my brothers...and he could have been compromised with today's viruses..I thank you for taking the time to answer me....
Maybe you are looking for
-
Why my Local Adapter Engine not showed in SLD and Integration Directory?
Hi guru, I have installed one Local Adatper Engine on Host B, then an XI is installed on Host A, but After I installed the local adapter engine and follow the standard configration step mentioned in this document:https://www.sdn.sap.com/irj/sdn/go/po
-
Connection to database using OLE DB provider??
can anyone tell me how do we connect to a remote ms access database kept in a lan using OLE DB Provider.Please, show me the sample code also.
-
Visible Lines Across Screen -- help!
hi there is a thick visible white line across the screen of my ipod nano!! its been like this for a few months. i've tried using the apple repair thing but when i try to input my info into the form, some vital fields wont display (such as address!!)
-
[solved]cannot route ppp0
my arch auto linked to internet by network@enp3s0 my /etc/conf.d/network@enp3s0 config file is following interface=enp3s0 address=192.168.2.2 netmask=24 broadcast=192.168.2.255 gateway=192.168.2.1 and I already configure initialize vpn and it can con
-
Hello All, I have purchased a MuVo TX FM and have great things to say about it! The MediaSource software on the other hand has an issue i would like to see addressed. While using the "smart fit" option the software creates a temp folder in the root o