[wlpi] HOW TO replace wlpi user management mechanism with LDAP service?

Dear all,
Is it possible for wlpi sp3?
Any suggestion or ideas?
Thanks in advance
Eric

Eric,
Could you please post this on the
weblogic.developer.interest.personalization newsgroup?
Eric Chen wrote:
Dear all,
Is it possible for wlpi sp3?
Any suggestion or ideas?
Thanks in advance
Eric--
Developer Relations Engineer
BEA Support

Similar Messages

How to revert back User Management changes with SAP ep6

Hi,
While implementing sso for R/3 with sap EP, we did some changes in SAP System of UM configuration, after that we are not able to login with existing super user.
We changed the existing userid SAPJSF to some other value in SAP system of UM. This is causing the problem.
How can I revert back the changes as currently I am not able to access the UM Configuration?
Which file can be change for reverting back the changes?
Thanks,
Manish

Hi Heiko,
I restarted server two times but it does not work. I also reverted the changes from propertysheet as well. Still it does not work.
After that I looked in defaultTrace.trc file and found the exception [EXCEPTION]
#1#com.sap.engine.frame.ServiceException: User is locked. Please notify the person responsible
The exception detail is below:
1.5#0011435A6406001D0000000F000013E80003FB0CCFA7CC82#1120457372187#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: User is locked. Please notify the person responsible
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:531)
 at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:201)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: User is locked. Please notify the person responsible
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:2099)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:2315)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:280)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:224)
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:528)
 ... 6 more
Can you please tell me that how can I unlock the user as my portal is not coming up. Your reply will be helpfull to me.
Warm Regards,
Manish

How to replace a user's photo with a default in Spaces

Hi,
When a user deletes a photo in his/her profile, I want to use a default photo for the profile. When a user doesn’t has a photo in the profile, the default one will be displayed. Can I pass in an empty string, null string or a default photo to setJpegPhoto().
// ADFContext
ADFContext adfCtx = ADFContext.getCurrent();
SecurityContext secCntx = adfCtx.getSecurityContext();
secCntx.getUserProfile().setJpegPhoto("/tmp/LARGE.png");
Thank you.

Sorry, typo and no proofreading on my part :) (right forum is ID 354, and I typed 254)
{forum:id=354} is what I meant

How to catch the user defined exception in application service

Hi All,
How to catch the user defined exception in application service when it is throwed by the external service..
Regards,
Thirumurugan.

Hi,
    Thanks for your reply,
        Actually I am calling validate Login method of External service from the application service. When the login fails, my external service will throw user defined Exception.I want to catch the user defined Exception.
    But in the application service , validate Login method can catch only Invocation Exception and Engine Exception.
   These two exception are present in the Application service remote interface.
public com.sap.comptest.extsrv.accrjavawsvi__document.output.
Ns1_validateLoginResponse validateLogin(com.sap.comptest.extsrv.accrjavawsvi__document.input.Ns1_validateLogin input) throws com.sap.caf.mp.base.exception.InvocationException, com.sap.caf.mp.base.exception.EngineException;
User defined exception is not present there. When i include the webservice as external service in CAF, it suppossed to generate the java file for the custom exception of validate Login method and this generated file should be included in the application service remote interface..
public com.sap.comptest.extsrv.accrjavawsvi__document.output.
Ns1_validateLoginResponse validateLogin(com.sap.comptest.extsrv.accrjavawsvi__document.input.Ns1_validateLogin input) throws com.sap.caf.mp.base.exception.InvocationException, com.sap.caf.mp.base.exception.EngineException,
(generated file name of user defined Excpetion.
Then only validate login method of application service can catch the user defined Exception which is thrown by the external service.
regards,
Thirumurugan.p

Insert multi-users for activity with web services

Hi guru,
Can anyone send me some sample code to add more than users to activity with web services, and any field are the required fields. I am using web services 2.0
Thanks

Hi,
I think you'll find you get a better response from the CRM On Demand Integration Development forum, this forum is just about the Administration of the system not integration.
cheers
Alex

How can i change users management panel?

Hello can someone tell me how to change users management panel, from this...
to this?
it's very urgent and i need it to manage the users with a better control also, i like this panel the best.
please help me

Hi Rufus,
Thank you for posting in Windows Server Forum.
I have performed a test in my lab and found that the way which you want to manage the user account is possible when system is in Workgroup; but when system is joined to domain you don’t get the required management panel. You will only get panel as per your
1st snap.
Workgroup:
Domain:
Hope it helps to understand!
Thanks.
Dharmesh Solanki

Exposing Portal's User Management functionality via Web Service issue

Dear experts,
I am trying to create and deploy a web service that will tap into User Management functionality (UMFactory) of the Portal. I created a Java project with a Java class with one of the methods exposed via Web Service. Since this is a Java project and not a Web Dynpro project, a number of external jars and libraries, but I don't know how to add WD_RUNTIME and I am guessing that my problem is related to that.
When trying to run the application, I receive the following error message when trying to envoke UMFactory:
java.lang.NoClassDefFoundError: com/sap/tc/logging/Location
 at com.sap.security.api.UMFactory.<clinit>(UMFactory.java:166)
 at com.hollister.getusers.GetPortalUsers.getPortalUsers(GetPortalUsers.java:75)
 at com.hollister.getusers.GetPortalUsers.main(GetPortalUsers.java:39)
Please, help.
Thanks,
Alex

Container Managed Authentication. Does everything you need.

How to replace ENTERPRISE Server Option by BB Internet Service Option?

On my 8700 there is the ENTERPRISE Server option installed.
As I want to vsend and receive emails from different email account without making use of the BB Enterprise geature I would like to get rid of the Enterprise-program installed and replace it by the Internet Service option.
I wonder whether this would be possible.
Can I replace Enterprice feature by the normal Internet Service?? and how?
Thank you for any information
Solved!
Go to Solution.

Hi there!
The options you are presented with when you start the email configuration wizard are controlled by virtue of the account type you have with your carrier. Given what you describe, it sounds as if you have perhaps on a generic data plan (or perhaps no data plan at all) -- that is normally not sufficient to grant you access to the Blackberry Internet Service that is hosted at your carrier. To enable Personal Email configuration, you must contact your carrier and request what is often (thought not universally) called The Blackberry Data Plan. Whatever it is called, you need a plan from your carrier that grants you access to the enhanced Blackberry services that they host - and you must pay them to access those enhanced services. Once you have that proper account, you will have Personal email as a configuration option (note, though, that Enterprise will not be "replaced"...rather, Personal will be added to the screen).
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to replace a substring that starts with and end with another substring?

Hi,
I am trying to parse data from HTML tables. First I want to remove all useless tags like . Now, how can I remove substrings like-
*My_Data_to_parse*
I was searching for any method which replaces a substring what starts with a substring (in this case "<font") and ends with another substring (in this case ">") . Is there any method like that? Or any better solution?
Another situation like the following-
*<td align="left" height="30" width="100%">*
In this case I want to remove all the height, align , width etc and make it as simple as "<td>". How can I do that?
Finally, all I am trying to do just to parse data from the tables in a html file. Is there any parser API or library to help me do that? Or to bring the data down to array from the tables based on table structure? Please suggest me.
Thanks in advance.

probably the best place to start is to search for the "<keyword" of all of the html keywords, then search for the location of the next ">" - this will indicate the end of the <keyword> opening tag.

How to create portal user and integrate with external appl login

How to create portal user and integrate the user with external application for single sign-on ?
I want to access my external application thru portal user ..?
Shyam

Hi Jithin,
The link that you've shared talks about a different scenario.
In my case, I want to pass the portal user id when the user clicks on the Help Link present in the header area.
I am trying to pass it along with the Help Link Url property of a masthead iview but it is not getting passed to the target Url.
I would like to know if it is possible to pass the Portal User Id in this way or not.
Though if we create a appintegrator iview and pass the user id <User.UserID> along with the target Url, it reaches there.
Thanks & Regards,
Anurag

How to Insert a User Defined Column with CheckBox In ADF Swings

I have create JTable by dragging a view object from Data Control Palette .But apart from columns listed in JTable i need to insert a User Defined column with Check Box selection option in each row .
Can any one help me out to sort the problem.
Regards
Bhanu Prakash
Message was edited by:
user579125

I retrieve 10 column from Database and build JTable. But apart from 10 column displayed i need to display one more column( User Defined) at run time with the check box option for each row . Because on select of corresponding check box i need to do some mathematical calculation. add also How do i know whether check box is selected or not.
Regards
Bhanu Prakash

How to replace a older Airport Extreme with a newer model? (OS 10.6 w/ Mac Mimi)

How do I replace a older Airport Extreme with a newer model? (Mac Mini OS 10.6.8 )

There is not much more to it than to buy a new one, and configure it using AirPort Utility.
You should be using AirPort Utility 5.6.1.
Power down your modem before removing your older Extreme and connecting the new one.

How to replace guest user icon?

How can I replace the dark shadow profile for guest user with a more friendly user icon?

Follow the steps in this hint that show how to change the guest account's login name. Ignore step 5.

How are other Apple users managing their ever growing iPhoto library's?

I have an iPhoto library that goes back quite a few years. I have in excess of 10,000 pictures in iPhoto that add up over 30gigs of pictures. I use an external hard drive to run time capsule to back up my computer. I have a few questions and was wondering if this makes sense beside running time capsule:
(1) Was thinking about getting another external hard drive and exporting all my pictures by year into folders outside of iPhoto.
(2) Was also thinking of then uploading these pictures to flick to have them stored in a "cloud".
(3) Don't really understand iCloud for backing up large quantities of photos and it seems silly to pay for something that I can get for free.
Any input from others managing large iPhoto databases would be appreciated.
Thanks!

10k isn't large, really. I have a 35k library on iPhoto and we've seen reports on here from people with more than 200k pics. iPhoto is good for 250,000 images in any one Library.
(1) Was thinking about getting another external hard drive and exporting all my pictures by year into folders outside of iPhoto.
What does this achieve? You lose all the organisation of iPhoto, you have to choose between the Originals and you edited versions and so on. Why not back up the Library to this disk? Multiple back ups are valuable too:
My Library lives on my iMac. It’s Backed up to two external hard disks every day. These disks are permanently attached to the iMac. These back ups run automatically. One is done by Time Machine, one is a bootable back up done by SuperDuper
It’s also backed up to a portable hard disk when ever new photos are added. This hard disk lives in my car. For security, this disk is password protected.
I have a second off-site back up at a relative’s house across town. That’s updated every 3 or 4 months.
Every couple of months I test the back ups to make sure they are working correctly. It’s very easy to mis-configure a back up application, and the only way to protect against that is to do a trial restore.
(2) Was also thinking of then uploading these pictures to flick to have them stored in a "cloud".
Storing in the cloud is a good idea. There are many options: Flickr, Picasa, SmugMug etc. However, check the terms of your account carefully. While most sites have free uploading, you will often find that these uploads are limited in terms of the file size or the bandwidth you can use per month. For access that allows you to upload full size pics with no restrictions you may need to pay.
So be very careful that whatever you choose will actually accept all your photos and in full quality.
(3) Don't really understand iCloud for backing up large quantities of photos and it seems silly to pay for something that I can get for free.
iCloud offers no such service. There is no way to back up photos on iCloud at all.
Regards
TD

How to implement Oracle user/role security with Access front end?

Hi,
We have successfully migrated our Access database tables to Oracle 10g using SQL developer. We've recreated all the users and roles(i.e., access groups) in Oracle and granted rights to tables.
In the Access front end database, in the Database window we have saved linked Oracle tables which replaced the Access tables. The forms, reports, queries run fine with the linked Oracle tables. All the linked table use one ODBC DSN to the Oracle database with the same Oracle user id.
We need to be able to authenticate users into the Oracle database and RE-link the tables based on their own unique user id. By during so we can allow users to use the Oracle standard user id/role and system privileges to control select, update, ect. rights to the database.
I've been able to use the VB code within Access to logon into the database with a unique id, but I have not been able to find out how to RE-link the tables to the unique user id using VB. There should be some way to relink tables dynamically, based on users login into the Access front end.
I don't know a great deal about Access projects, but I do know with SQL server allows login into your Access project and link tables dynamically.
Can someone give me some assistance or point me in the right direction?
Thanks in advance,
Larry

We had one of our programmers here come up with a VB code solution for re-linking table within Access. However the relinking takes 3-4 minutes for 100+ tables.
In an effort to help you understand the situation better, I will attempt to elaborate on the problem:
We have an Access 2003 application which currently has a front end using Access(forms, reports, queries, & VB code) and a MS Access 2003 backend.
We have migrated the backend tables to Oracle. However, we still have a need to maintain the front end in Access, since we have over 60 forms, 40 reports, 200+ queries in Access. Its easy to understand, we have a significant investment in the front end(Obviously, the plan is to migrate the front end also at some future date).
In order to utilized the existing front end, we have to validate and modify the current front end connections to the new Oracle backend. One of the features of Access is that you can "link" tables and save the link for runtime. Each Access table can have its own link which is a separate ODBC/JET connection. As such, each separate link has its own userid/database information.
The other issue with using the Access front-end is that Access utilizes a workgroup file to implement user and group security. The workgroup file contains all the users and which groups the users belong to in Access. Then within Access, you allow users access to object(tables, queries, ect) by their userid and or group. When users open an Access database with Access security enabled, they are required to log into Access. The login is authenticated by the workgroup file. Once, logged into Access, users have rights to Access objects based on their rights granted to their userid and groups they belong. The problem here is that when you remove the linked Access tables and replace them with linked Oracle tables, Access has knowledge about Oracle table rights granted to users; nor would you expect it to.
The dilema is the disconnect between Access and the fact Oracle utilizes a similar but much more sophisticated security model. It creates users and roles(which are similar to Access groups), and again this is independent of Access security.
Our solution was to still use the Access workgroup file security along with the Oracle security model. By using the Access userid and then creating a similar Oracle userid with similar table rights granted in Access, you could apply security within Access and also with the Oracle database.
For example, a user BOB logs into Access via the workgroup file, using VB code, Access then establishes a Oracle connection logining into Oracle using the same unique userid BOB into Oracle.
After connecting and validating user BOB into Oracle, then the Access tables are relinked to Oracle using the user BOB userid and table rights.
This Oracle userid has been granted table rights specific for this userid.This allows the user BOB to use the Access application and still be authenticated into the Oracle database.
The problem with this solution is that the relinking of the saved Access tables takes 3-7 minutes for about 100+ tables. This is not acceptable for users each time they log into the application.
Our current alternative is to use one Oracle userid to login each user, and use Access form restrictions/security to allow/prevent users from updating/viewing data. Obviously, this is not the optimal solution in respect to security, but it at least allows us to control access to the data(via the forms) by using one logon required for each user, and quick startup time for the application.
I understand SQL server does a better job in integration, but we use Oracle which is what I am trying to work with.
Larry

[wlpi] HOW TO replace wlpi user management mechanism with LDAP service?

Similar Messages

Maybe you are looking for