[WLS 10.3]:Weblogic.cache.filter does not cache all http headers
When using Weblogic CacheFilter servlet filter to speed our request. However, cached pages miss
some HTTP Headers ie: Content-Encoding.
As a result, if we setup a GZIP filter on most popular static text oriented document like css, html, js, the GZIP filter add a Content-Encoding http header set to gzip. But as CacheFilter forget that header, client receives the correct content-type but not anymore the Content-encoding.
Steps to Reproduce
Ask a static file like a .js library and sniff the HTTP headers. Switch the servlet filter order between gzip and CacheFilter, the HTTP header is correctly set but not when putting cache filter first.
When using Weblogic CacheFilter servlet filter to speed our request. However, cached pages miss
some HTTP Headers ie: Content-Encoding.
As a result, if we setup a GZIP filter on most popular static text oriented document like css, html, js, the GZIP filter add a Content-Encoding http header set to gzip. But as CacheFilter forget that header, client receives the correct content-type but not anymore the Content-encoding.
Steps to Reproduce
Ask a static file like a .js library and sniff the HTTP headers. Switch the servlet filter order between gzip and CacheFilter, the HTTP header is correctly set but not when putting cache filter first.
Similar Messages
-
Photoshop CC - Liquify filter does not show all tools. Freeze is missing.
The freeze tool is not pictured on the left with the other tools. I can access freeze by pressing the "F" key, but there is no way to unfreeze since that tool is missing as well. Any ideas how to fix this? Only seven tools are seen now.
Hello!
Freeze is not available if you do not check "advanced mode" on the right column.
If you prefer to work in the non advanced work, the unfreeze, Thaw Mask tool's shortcut is "D", or, once you've selected the Freeze tool by its shortcut, hold down ALT. -
PHOTOSHOP C6 OIL PAINT FILTER DOES NOT WORKING
PHOTOSHOP C6 OIL PAINT FILTER DOES NOT WORKING
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2095 MHz
Built-in memory: 3003 MB
Free memory: 1578 MB
Memory available to Photoshop: 1666 MB
Memory used by Photoshop: 100 %
Image tile size: 128K
Image cache levels: 4
The GPU Sniffer crashed on 9/7/2014 at 11:15:55 AM
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Mobile Intel(R) 4 Series Express Chipset Family v2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 2
Video Card: Mobile Intel(R) 4 Series Express Chipset Family v2
OpenCL Unavailable
Driver Version: 8.15.10.2869
Driver Date: 20121004000000.000000-000
Video Card Driver: igdumdx32.dll,igd10umd32.dll
Video Mode:
Video Card Caption: Mobile Intel(R) 4 Series Express Chipset Family v2
Video Card Memory: 1310 MB
Video Rect Texture Size: 4096
Video Card Number: 1
Video Card: Mobile Intel(R) 4 Series Express Chipset Family v2
OpenCL Unavailable
Driver Version: 8.15.10.2869
Driver Date: 20121004000000.000000-000
Video Card Driver: igdumdx32.dll,igd10umd32.dll
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Mobile Intel(R) 4 Series Express Chipset Family v2
Video Card Memory: 1310 MB
Video Rect Texture Size: 4096
Serial number: 92628701192123445467
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\ShAmRy\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 80.1G, 40.6G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Collada 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mezzotint 13.0
MMXCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Picture Package Filter 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Pinch 13.0
Pixar 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0.1
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Wind 13.0
Wireless Bitmap 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEI am getting the same error, also when starting CS6 I receive a message that my graphic device driver is not officially supported. I have updated the drivers and have never had any issues with any other programs. It appears to be a bug in the program.
-
IIS proxy 5.1 and Weblogic 6.1 does not support sticky session
Dear Sir,
Our system is migrating from Weblogic 5.1 to Weblogic 6.1. After testing on
development environment, it is found that IIS proxy for 5.1 plug-in and Weblogic
6.1 server is perfect match for our case. Since our appliction system hit some
bugs of IIS proxy for 6.1. In development environment, one IIS match with one
Weblogic.
During production launch, another problem found. It seems that IIS proxy 5.1
plug-in with Weblogic 6.1 does not support the sticky load balancing. A sticky
service is one where a client sends its requests to the same instance and those
requests are not redirected to other instances. In production, two IIS match with
two Weblogic. Below is
#WebLogicHost=10.0.3.12
#WebLogicPort=8012
WebLogicCluster=10.0.3.12:8012,10.0.3.13:8012
COnnectionTimeoutSecs=10
ConnectionRetrySecs=2
ErrorPage=https://www.xxxx.com/eBank/sysnotready.htm
CookieName=eBankingWebLogicSession
Anyone have idea on out case?
Thanks,
KAIMy test was with 6.1 SP3.
The way to tell is by analyzing the cookie(JSESSIONID).
Perhaps the behaviour changed post SP1. I can't say for sure.
Eric
"Gary Rudolph" <[email protected]> wrote in message
news:[email protected]...
Is that entirely true concerning you don't need the persistence set to
replicated in the weblogic.xml to gain sticky load balancing?
The reason I ask was that in our situation sticky wouldn't work without
having the persistence set to replicated. This was with NSAPI and WLS 6.1
SP1. The weblogic servers were configured in a weblogic cluster. So..based
on this statement we should not have needed to set the persistence, but in
practice we did for it to work.
Gary
"Eric Gross" <[email protected]> wrote in message
news:[email protected]...
I just checked, and you are correct. You just need to have clustering
enabled in 6.1. You do not necessarily need to have persistence set to
replicated.
Of course, you won't get failover, but you will get the sticky load
balancing.
Regards,
Eric
"Ricky Wong" <[email protected]> wrote in message
news:[email protected]...
Why do we need to set session persistence to replicate in order to
perform
sticky load balancing ? There is no such requirement in WebLogic 5.1.
As
far
as I know, the IIS plugin simply interprets the value of the sessioncookie,
which should be embedded with the application server address, then
forward
the request to that particular application server.
We didn't use session replication in our environment because not allsession
variables are serializable.
"Eric Gross" <[email protected]> wrote in message
news:[email protected]...
The problem you mentionned in the other newsgroup post has been
fixed
and
will be in SP4. If you are in production or nearing production and
need
a
resolution now, then please open a case with support.
You should not need any other parameters to do the load balancing.
But
to
have the sticky load balancing, you must make sure you have session
persistence set to replicated for the webapp in question.
I'm not sure I am understanding your 3rd question.
In any case, my advice is to either wait for SP4 to bereleased(scheduled
sometime this month) or if you really need to go into production
soon,
contact support to obtain the latest IIS plugin.
Regards,
Eric
"Mike" <[email protected]> wrote in message
news:[email protected]...
Dear Eric,
Thanks very much for you kindly information, but we still have thefollowing issues
regarding the WL IIS proxy:
1. We have already tried the IIS proxy that comes with WL6.1 SP3.However, the
result from that version of IIS proxy is not satisfactory, as weexperienced cases
where the web page is not displayed correctly (as in
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.develo
per.interest.plug-in&item=994&utag=).
If there is any IIS proxy released after WL6.1 SP3, Could you
kindly
give
us
a pointer to the plugin?
2. In WL5.1 case, we are only required to have "WebLogicCluster"
parameter
set
to two weblogic servers in order use the load balancing features.
In
WL6.1, we
do not come across any additional settings required to support
load
balancing.
Is there any such settings required (e.g. in
config.xml,weblogic.xml,
application.xml,
etc?)
3. Does WL IIS proxy problem has anything to do with the version
of
the
IIS server/windows
versions that are using? we have already tried with IIS4 and IIS5
and
have
different
kinds of issues.
Thanks in advance for your kind assistance.
Mike
"Eric Gross" <[email protected]> wrote:
Yes, the session format has changed when using clustering and you
cannot
use
the 5.1 plugin to proxy to 6.1.
What problems did you have using the 6.1 plugin? Maybe you need
the
latest
6.1 plugin.
Regards,
Eric
"KAI" <[email protected]> wrote in message
news:[email protected]...
Dear Sir,
Our system is migrating from Weblogic 5.1 to Weblogic 6.1.
After
testing on
development environment, it is found that IIS proxy for 5.1
plug-in
and
Weblogic
6.1 server is perfect match for our case. Since our appliction
system
hit
some
bugs of IIS proxy for 6.1. In development environment, one IIS
match
with
one
Weblogic.
During production launch, another problem found. It seems
that
IIS
proxy 5.1
plug-in with Weblogic 6.1 does not support the sticky load
balancing.
A
sticky
service is one where a client sends its requests to the same
instance
and
those
requests are not redirected to other instances. In production,
two
IIS
match with
two Weblogic. Below is
#WebLogicHost=10.0.3.12
#WebLogicPort=8012
WebLogicCluster=10.0.3.12:8012,10.0.3.13:8012
COnnectionTimeoutSecs=10
ConnectionRetrySecs=2
ErrorPage=https://www.xxxx.com/eBank/sysnotready.htm
CookieName=eBankingWebLogicSession
Anyone have idea on out case?
Thanks,
KAI -
IOS 8.1 Does Not Download All iCloud Mail/ Keeps Cache?
Hello,
I have setup and enabled an iCloud e-mail account on all of my devices and was successfully able to use the Mail app in Mac OS X Yosemite to copy mail from my Yahoo! inbox to my iCloud inbox. All e-mail copied from Yahoo! Mail appears in the OS X Yosemite Mail app as well as in the iCloud.com site, however, my iPad Air 2 and iPhone 5 both running iOS 8.1 does not download all of the mail from iCloud. I have tried the following on both iOS 8.1 devices with no success.
- Disable iCloud mail and re-enable
- Sign completely out of iCloud and sign in again, then reconfigure all iCloud services including mail
The result of both steps is that the incomplete list of e-mail in the iCloud inbox just reappears in the Mail app instead of downloading from iCloud again. It looks like the incomplete list of e-mail is stored on the iOS device and signing out of or disabling iCloud mail just hides it; re-enabling or signing in merely shows it again. This appears to work differently than my Yahoo! Mail configuration where if I sign out of or delete the Yahoo! account and reconfigure, iOS downloads a fresh copy of all e-mail in the inbox and all other folders. Here are my two questions:
- How do I get my iPhone and iPad Air 2 to download ALL e-mail from my iCloud mail account?
- Are my suspicions true? Does iOS actually store a cached copy of iCloud mail on the device when the service is disabled and just "redisplays" it when re-enabled?
Thanks!I had the same problem. My iCloud it's a mess since the iOS 8.1 update.
Probably your iCloud isn't working too. -
Video Filter does not work.
Hello.
I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
Is the software's problem?
Thanks in advance.
YingFor a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
-DH -
When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)
Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences. -
SSPU issue: Cache directory does not exist, and couldn't create a new downl
I have installed SSPU and created an offer over there. When I run my offer it gives the error:
Cache directory does not exist, and couldn't create a new download cache directory.
Can anyone tell me the root cause and workaround for this issue?Hi
Try deleting the "offer" directory from SSPU home and then delete the offer from Sub-Client . Restart client and then add the provider . Start pushing the content from SSPU and see if the issue still persists .
Thanks
Srinath -
Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,Hi,
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Bea weblogic 6.1 does not oracle Database fail over
Hi We had Concurrency Strategy:excusive . Now we change that to Database for performace
reasons. Since we change that now when we do oracle database fail over weblogic
6.1 does not detect database fail over and it need restart.
how we can resolve this ??mt wrote:
Hi We had Concurrency Strategy:excusive . Now we change that to Database for performace
reasons. Since we change that now when we do oracle database fail over weblogic
6.1 does not detect database fail over and it need restart.
how we can resolve this ??Are your pools set to test connections at reserve time?
Joe -
Import app to svn when run app package weblogic.xml.process does not exist
Hi,
i am versioning my adf application to a server with subversion, the initial import of the application works ok, but when i tried to run it, it does not found all weblogic classes.....
Error(16,28): package weblogic.xml.process does not exist
Error(6,25): package weblogic.security does not exist
Error(8,34): package weblogic.security.services does not exist
Error(9,33): package weblogic.servlet.security does not exist
Error(39,36): cannot find class SimpleCallbackHandler
Error(41,26): cannot find variable Authentication
Error(42,6): cannot find variable ServletAuthentication
any ideas??
thanks.Hi,
i am versioning my adf application to a server with subversion, the initial import of the application works ok, but when i tried to run it, it does not found all weblogic classes.....
Error(16,28): package weblogic.xml.process does not exist
Error(6,25): package weblogic.security does not exist
Error(8,34): package weblogic.security.services does not exist
Error(9,33): package weblogic.servlet.security does not exist
Error(39,36): cannot find class SimpleCallbackHandler
Error(41,26): cannot find variable Authentication
Error(42,6): cannot find variable ServletAuthentication
any ideas??
thanks. -
It is true that Weblogic 10.3 does not support the 1.2.840.113549.1.1.11. - SHA1 with RSA signature encryption?
Refer: Re: SSL not working with 10.3 and jdk 1.6.0_13
-Akshay -
WLS 8.1.4 cluster is does not load balance correctly
Hi WLS gurus!
I have a problem with my apache load balancer....
it seems apache does not see all WLS instances with DynamicServerList ON!
all connections come in to, in my case, instance 2...
my cluster runs on 2 separate machines..
any ideas? problem with DNS maybe?
thanks
MichaelHi,
Go through the following link and check whether you configured load balancing settings correctly or not.
http://e-docs.bea.com/wls/docs81/cluster/load_balancing.html
Regards
Anilkumar kari -
EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2
Hi guys,
Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
this related to Exchange 2010 SP1 known issue.
http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.Hi,
Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
When did this issue begin?
Please restart the AD topology service to check result.
Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support -
Photoshop Open dialog does not show all files
I've been noticing that unconsitantly the Photoshop Open dialog does not show all PSD files in a folder, some are just plain missing. In Finder they show up like normal though. Anyone else with this problem?
The open and save dialogs are provided and mostly run by the OS, not the application.
It sounds like you might have a filter set on your open dialog (like the search option).
Maybe you are looking for
-
Reverse mapping tool in 3.0.1 ignores "-schemas" option
I believe I have discovered a bug in the 3.0.1 version of the reverse mapping tool. Here is a script of the commands that worked fine in 3.0.0: Script started on Mon Jan 12 11:02:19 2004 1$ which schemagen /opt/kodo-jdo-3.0.0/bin/schemagen 2$ echo $P
-
Vendor wise TDS Amount Exmptions
Hi, I have Refer the other old threads but i have not found any suitable answer. How we can maintain vendor wise maximum amounts for TDS deduction. steps: Go to Define withholding tax type, under Accumulation Type, select radio button Per Year, Star
-
How to subtotal using auto-calc ?
Hi, I am trying to subtotal based on Product. (The POV account is Revenue) FR.pdf has an example using auto calculateion, but I am not able to get it to work. I clicked on member Product (the column on furthest left) and select Auto Calc. I selected
-
HT3275 Switching to another wifi
My router was damaged and has been replaced, as such I am using a new name & password for the wifi connection at home. However, somehow I am lost in getting my time machine "hook" to the wifi.
-
Installing Printer drivers ONLY?
so... when i installed leopard i figgered i'd save some drive space by not installing ALL those printer drivers, just the hp's (i only ever owned hps). recently i inherited a brother hl 1440 (a monochrome laser). i went to the brother web site to fin