WLS 32-bit installer on a 64-bit JVM

Hi All,
I was also told that I could run the WLS 10.3.1 (32 bit) installer wls1031_solaris32.bin along with a 64-bit JVM and WebLogic will run in 64-bit mode. Is that true?
If yes then what is the need for a 64 bit installer?
My underlying OS is solaris 64 bit.
I wonder how is that possible. Can anyone help me understand?
Thanks in advance.

It doesn't make sense to me that a 32-bit installer is installing a 64-bit JVM unless that installer will install both 32-bit and 64-bit JVMs.
I would suggest you use the installer from the edelivery site: WebLogic Server 9.2 MP3 Sun Solaris SPARC (64-bit) V15433-01 598M.
Regards,
John A. Booth
http://www.metavero.com

Similar Messages

Is Dreamweaver cs5 64-bit installer compatible to 32-bit pc?

Please help I really need to know your suggestions guys because I have this 32-bit pc and 64-bit DW cs5 installer please, please help.....

That's right...
The following table lists where to find specific information about Adobe product support on 64-bit operating systems.
Note: While most of the Adobe Creative Suite 5 and up software is natively 32 bit, these applications do run on 64-bit versions of Windows. The exceptions are: Adobe Premiere Pro CS5 and After Effects CS5, which are 64 bit only. For an in-depth overview of 64-bit computing and its value, see this blog from Scott Byer, Adobe Photoshop software architect.
Product
Compatibility
Acrobat
See the following TechNotes:
Support policy for Adobe Acrobat 9.x Windows 64 bit
Support policy for Adobe Acrobat 8.0.x Windows 64 bit
Support Policy for Adobe Acrobat 7.0.x Windows 64 bit
Acrobat 3D
Acrobat 3D is supported on 64-bit Windows platforms per the
system requirements and runs as a 32-bit application.
Flash Professional CC
Flash Professional CC is a native 64-bit application and is supported only on 64-bit operating systems. Installation of Flash Professional CC is blocked on 32-bit operating systems.
Flash Professional CS6 is supported both on 32-bit and 64-bit operating systems. However, it runs in 32-bit mode on 64-bit systems. See System requirements.
Flash Player
See Flash Player support on 64-bit operating systems.
Creative Suite 5 (includes Flash Professional and other applications)
See the "Adobe support for 64-bit operating systems" section of Adobe Creative Suite 5 FAQ.
FrameMaker
FrameMaker 9 was tested on 64-bit Vista, and there are no known issues that are specific to the 64-bit version of the OS. FrameMaker 9 is not a 64-bit application, and it runs on 64-bit Windows in 32-bit compatibility mode.
Photoshop Elements
Photoshop Elements 8 runs in 32-bit mode on 64-bit systems. For issues with earlier versions of Photoshop Elements compatibility with Windows Vista, see Photoshop Elements compatibility with Windows Vista.
Premiere Elements
Premiere Elements 8 runs in 32-bit mode on 64-bit systems. For issues with earlier versions, see Premiere Elements compatibility with Windows Vista.

I am trying to reinstall iTunes 11.1.5 after the update hung. I noticed that the 64 bit installer uses the 32-bit "Programs" folder as the default. Is this correct?

The update from v11.1.3 to 11.1.5 using the iTunes internal updater hung about 80% through the install. I had to kill it and reboot before I could uninstall the existing version since I did not know what state the program was in. When I started the reinstall using the 64 bit version, it showed a default installation directory of "Program Files (x86)". Is this correct? I know iTunes had something installed in the 64 bit "Program Files" directory.. Before I procede, I want to be sure that it is not going in the wrong place. I have a Win 8 PC.
Thanks,
JohnD

Yes... that is correct.
On 64-bit machines iTunes installs various components into the following folders (or localized equivalents):
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iPod
C:\Program Files\iTunes
C:\Program Files (x86)\Apple Software Update
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple
C:\Program Files (x86)\iTunes
tt2

Error: This installer does not support installation on a 64-bit operating system. Please download the 64-bit version of Premiere Elements.

what to do?

anorman9
What version of Premiere Elements and on what computer operating system?
Can we assume Premiere Elements 13 on Windows 7, 8, or 8.1 64 bit and that you are dealing with purchased installation files instead of tryout?
In either case, it might be easier for you to consider the download of the Premiere Elements 13 tryout from the following web site, where it might be easier to pin point the files that you need for your specific computer environment, that is, 32 bit installation files for 32 bit operating system and 64 bit installation files for 64 bit operating system. . If you are dealing with purchased software and serial number, during installation of the tryout files you insert your purchased serial number into these installation files. And, remember, you need 2 files for the process...one with a .exe file extension and one with a .7z file extension
So, please review and consider the following
http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
To avoid an Access Denied message, please follow carefully the web site's "Note: Very Important Instructions".
Please let us know if any questions or need clarification.
Thank you.
ATR

Vista 64-bit installation on Satellite P500/025

I have just purchased a P500/025 and should have picked 64 bit installation but installed 32 bit instead.
Could someone please give me instructions on how to install 64 bit vista over 32 bit Vista?
Will I loose everything I have installed on my current 32 bit installation?
Thanks in advance.

> Could someone please give me instructions on how to install 64 bit vista over 32 bit Vista?
The notebook seems to be preinstalled with both OS; 32bit and 64bit
At the banging of the installation procedure you can choose what OS you are want to use.
As far as I know you can reverse this very easily. You need to run the recovery procedure again.
Simply boot the notebook, press F8 and choose Repair my Computer.
Then choose Toshiba HDD recovery and then you should be pointed to the menu which allows you to choose the 32bit or 64bit OS.
Check it and post how it worked.
Cheers

WLS (40-bit) to WLS (128 bit) installation

Hopefully this will help shed some light on the subject.
Terry
If you receive the following warning:
<I> <Security> WARNING: Exportable (weak) WebLogic Server build running and
domestic (full) strength SSL license detected. Only exportable strength SSL
connections will be accepted.
This indicates that you have a full strength certificate but a weak strength
build of the server. For full strength encryption there is a different WLS
build. The generally-available (weak/40-bit) version of WLS 5. 1 supports
512-bit certificates and 40-bit bulk data encryption. The full strength
(128-bit) WLS 5.1 build supports 768-bit and 1024-bit certificates and
128-bit bulk data encryption. Your sales contact can provide the required
forms and a special URL to download the full strength build of WebLogic.
The installation for the 128-bit version is the same as the installation for
the 40-bit version. When converting to the 128-bit version a complete
re-installation is necessary. If you are installing service packs, please
note that although Service Packs 1-5 are the same for both the 40-bit and
128-bit versions, SP6 for the 128-bit version is a controlled release. In
order to obtain SP6 for WLS 5.1 (128-bit), you will need to contact your
sales representative who will be able to provide a URL where it can be
downloaded.
Some other notes concerning the 128-bit installation. First, ensure that
you are using the permanent license that has been updated with the 128-bit
key. Second, for information on setting up WLS SSL (i.e. installing
1024-bit security certificates), please see the documentation at:
http://www.weblogic.com/docs51/classdocs/API_secure.html.
It is my understanding that the difference between the 40-bit and 128-bit
versions of WLS 5.1 is in the encryption/decryption module. Since the
difference is limited to this particular module, transitioning from the
40-bit to the 128-bit version should be transparent as far as WLCS (3.1.1
SP1 & 2.01 SP2) is concerned. This is supported by the fact that there is a
single version of WLCS for both domestic use and export use.
A couple of general notes concerning WLCS 3.1.1/2.0.1 installations running
on top of WLS 5.1 (40-bit or 128-bit) SP6:
WLCS 3.1.1: To date, support cases have not been received with a WLCS
3.1.1 installation running on top of WLS
5.1 (40-bit/128-bit) SP6 where SP6 has been determined to be the
problem.
WLCS 2.0.1: With one minor exception (see Solution S-05838 below),
support cases have not been received with a
WLCS 2.0.1 installation running on top of WLS 5.1 (40-bit/128-bit) SP6
where SP6 has been determined to be the
problem.
A couple of general notes concerning WLCS 2.01 and WLS 5.01 (40- or 128-bit)
Service Packs 1-6:
- There have been problems when using SP1, SP2 and SP3 for WLS 5.
- Therefore, SP4 (minimum) is required.
- To date, support cases have not been received where SP5 has been
determined to be a problem.
- There is one small issue related to SP6 (see Solution S-05838 below).
Otherwise, support cases have not been
received where SP6 has been determined to be a problem.
- Following the SP6 installation, all the JSPs will need to be
recompiled. Due to the custom tags used in WLCS 2.0.1,
the JSPs cannot be pre-compiled. Therefore, recompiling will occur as
the pages are accessed.
Please see the release notes that accompany each service pack downloads for
issues that are resolved with each particular
service pack.
Solution S-05838
A better solution to the problem: WLCS 2.0.1 only: DataLoader script causes
ASCClientException with WLS 5.1 SP6
Old Solution:
Use WLS 5.1 SP5 to run the DataLoader, THEN upgrade to SP6.
New Solution:
You can run the DataLoader without exceptions for WLCS 2.0.1 SP2 and WLS 5.1
SP6 if you modify the script to use t3 socket connections instead of http.
Open the DataLoader script for editing and change the two appearances of
"http://" to "t3://".

You need to contact your sales rep and get the domestic strength version of
WLS.
Michael Girdley
Product Manager, WebLogic Server
BEA Systems Inc.
Ravi Kumar.T <[email protected]> wrote in message
news:8945ju$lu8$[email protected]..
Where to specify the no of bits for encryption for SSL. Is it depend on
verisign certificates installed!!
We are using we weblogic 4.5.1 on Solaris. and my site is having following
encryption
SSL 3.0, RC4 with 40 bit encryption (Low); RSA with 512 bit exchange
and I have seen some other sites are having
SSL 3.0, RC4 with 128 bit encryption (High); RSA with 1024 bit exchange
thanks..
ravi

Itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!

itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!

I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly.

Combo installer keeps installing 64 bit on windows vista

Is there a 32 bit only installer? every time I try to install an adobe flash update it loads the 64 bit version because I am on 64 bit Windows Vista, since the 64 bit of flash doesnt work on Vista I want to install the 32 bit version of flash but it keeps forcing the 64 bit version and causing problems with flash since the 64 bit doesnt support Vista. So I dont want a combo installer but I want just a 32 bit version where can I find that?

There is no 32-bit only or 64-bit only installer. On 64-bit systems it will install both 32-bit and 64-bit players.
If you don't want to use the 64-bit player, use 32-bit browsers only.

64 bits/ installation of SAP NetWeaver 7.01 ABAP Trial Version on vista

Hello All,
I'm trying to install SAP NetWeaver 7.01 ABAP Trial Version on a 64 bits computer with windows vista. When I'm launching sapmmcX86u.msi to install the SAP Management Console, I have the following error : " the installation does not support 64 Bits Windows Operating systems. Please use the corresponding 64 bit installation package "
does this package exist ?
Thanks for your answers

Hello All,
I'm trying to install SAP NetWeaver 7.01 ABAP Trial Version on a 64 bits computer with windows vista. When I'm launching sapmmcX86u.msi to install the SAP Management Console, I have the following error : " the installation does not support 64 Bits Windows Operating systems. Please use the corresponding 64 bit installation package "
does this package exist ?
Thanks for your answers

How to find out if the Oracle is a 64 or 32-bit installation

Hi,
I have a customer who has a 64-bit enabled Solaris 8 machine with an Oracle installed on it.
Is there a simple and quick way to find if the installed Oracle is 64 or 32-bit installation. Something like a v$ table.
Thanks,
Tal ([email protected]).

Hi,
if the database is running, start a sqlplus session. You will see in the banner something like '64Bit Production' (for 64-bit) or only 'Production' for 32-bit. Alternatively, especially if the database is not running, go to $ORACLE_HOME/bin and type 'file oracle'. The returning strings shows either 32-bit or 64-bit.
Best regards
Werner

Not able to find AIA2.5 installable for Windows 64 bit

Hi Friends,
I am not able to find the installable of AIA 2.5 for windows platform (64 bit) at oracle e-delivery.
I have installed SOA 10..1.3.5.0 with OC4J, now I need to install AIA 2.5 and then Customer MDM (UCM) PIP over it as a project requirement.
Kindly guide me from where I may download AIA 2.5 and Customer MDM PIP installable.
Thanks
Shalindra Singh

Thanks hsawwan,
It will not give problem ?
Oracle should put some notes on it.
Reg
Chirag PatelFor 11i on Solaris, the applications patches are always 32-bit. Only select 64-bit Solaris for database patches if you converted your database to 64-bit.

64 bit or 32 bit installation of oracle 9i - which one?

hi there - i have a sun solaris ultra 60 with 2gb ram and 32gb hdd and solaris 9-64bit on it. should i install oracle 9i 32 bit or 64 bit? Also after trying to install the 32 bit server version of Oracle 9i on the same machine we noticed a severe decrease in speed on the server but uptime doesnt show any processes taking over the machine. Any ideas? has it got anything to do with 32 bit 64 bit installation distributions for either oracle or solaris??
thanks in advance guys

If you have an instance running on it, you can query the v$version view. This will give your the 32/64 bit info.
SQL> select * From v$version;
Oracle8i Enterprise Edition Release 8.1.7.4.0 - 64bit Production
PL/SQL Release 8.1.7.4.0 - Production
CORE 8.1.7.0.0 Production
TNS for Solaris: Version 8.1.7.4.0 - Production
NLSRTL Version 3.4.1.0.0 - Production
5 rows selected.

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Unable to install photoshop elements 13 on new computer. Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

WLS 32-bit installer on a 64-bit JVM

Similar Messages

Maybe you are looking for