WLS 6.1 SP2, iPlanet 6 & NSAPI problems
Does anybody know of a good reference document on how to properly install the NSAPI
plug-in for WLS6.1 & iPlanet6(SunOne) on Unix (Solaris). Many of the references that
I have been finding are either incomplete, have typo's and are mostly Windows oriented
(ie. with the .dll's, paths, examples, etc.)
My problem is that our old iPlanet 4.x works fine...everything proxies, etc. iPlanet
6 just doesn't want to seem to communicate with WLS 6.1 SP2 We tried many of the
saem things from the 4.x magnus & obj.confs...but things look somewhat different
in iPlanet 6.x (did they move tings..such as the fn's from one to the other, etc.)
If so..and there are big differences in installing iPlanet 4.x vs. 6.x then many
of the docs out there are inaccurate. Does anyone know if there is a newer version
of the NSAPI plug-in for Unix.
I would love to see a basic, working set of magnus.conf obj.conf, MIME,etc from someone
who has actually gotten NSAPI to work between WLS 6.1 and iPlanet 6 on Unix (Solaris)
It blows my mind that 4.x works and 6.x doesn't. An updated NSAPI plug-in
, if it exists and perhaps fixes the problem, would make my day. Any ideas? Thanks!
-Doug
Hi Doug
U have to put the following section
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib="./libproxy.so"
Init fn="wl_init"
into magus.conf
and put the rest into obj.conf
Best Regards
Alex
"Doug E" <[email protected]> wrote:
>
Does anybody know of a good reference document on how to properly install
the NSAPI
plug-in for WLS6.1 & iPlanet6(SunOne) on Unix (Solaris). Many of the references
that
I have been finding are either incomplete, have typo's and are mostly Windows
oriented
(ie. with the .dll's, paths, examples, etc.)
My problem is that our old iPlanet 4.x works fine...everything proxies,
etc. iPlanet
6 just doesn't want to seem to communicate with WLS 6.1 SP2 We tried many
of the
saem things from the 4.x magnus & obj.confs...but things look somewhat different
in iPlanet 6.x (did they move tings..such as the fn's from one to the other,
etc.)
If so..and there are big differences in installing iPlanet 4.x vs. 6.x
then many
of the docs out there are inaccurate. Does anyone know if there is a newer
version
of the NSAPI plug-in for Unix.
I would love to see a basic, working set of magnus.conf obj.conf, MIME,etc
from someone
who has actually gotten NSAPI to work between WLS 6.1 and iPlanet 6 on Unix
(Solaris)
It blows my mind that 4.x works and 6.x doesn't. An updated NSAPI plug-in
, if it exists and perhaps fixes the problem, would make my day. Any ideas?
Thanks!
-Doug
Similar Messages
-
IPlanet NSAPI -- problem with KeepAlive connections
Hi
I have problems with following scenario:
When client establish KeepAlive connection with iPlanet server it sends one important custom header only on first request.
My goal is to implement filter that will add this header to all subsequent requests on this connections.
I can identify request by socket descriptor, but I don't know how to detect if this connection is still the same, or socket was closed and reused for other connection.
Thanks, AndrewIt seems like you have to make sure your web application uses sessions in order to trace an interaction with your web app clients.
You should probably write either an NSAPI filter that would add your special header to all requests to a certain application(that should supports sessions) or a servlet filter that would do the same. -
WLS 7.0 SP2 Cluster deployment problems
I am having problems deploying our application to a weblogic cluster. Environment is
windows 2000/XP and weblogic 7.0 SP2.
Here's a simplified version of the cluster.
I have 2 managed servers that are part of the cluster.I have defined the managed server
configuration in the admin server's config.xml as below.
<Server Cluster="myCluster" ExpectedToRun="false" ListenPort="7771"
Machine="machine1" Name="Server1" ServerVersion="7.0.2.0"
WeblogicPluginEnabled="false" XMLEntityCache="XMLCacheMBean_Server1">
<COM Name="Server1"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server1"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server1" UserPreferred
er="Server1"/>
<JTARecoveryService Name="Server1"/>
<KernelDebug Name="Server1"/>
<Log Name="Server1"/>
<SSL Enabled="false" ListenPort="7772" Name="Server1"/>
<ServerDebug Name="Server1"/>
<ServerStart Name="Server1"/>
<WebServer Name="Server1"/>
</Server>
<Server Cluster="myCluster" ExpectedToRun="false" ListenPort="7771"
Machine="machine2" Name="Server2" ServerVersion="7.0.2.0"
WeblogicPluginEnabled="false" XMLEntityCache="XMLCacheMBean_Server2">
<COM Name="Server2"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server2"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server2" UserPreferred
er="Server2"/>
<JTARecoveryService Name="Server2"/>
<KernelDebug Name="Server2"/>
<Log Name="Server2"/>
<SSL Enabled="false" ListenPort="7772" Name="Server2"/>
<ServerDebug Name="Server2"/>
<ServerStart Name="Server2"/>
<WebServer Name="Server2"/>
</Server>
<Server AcceptBacklog="50" HelpPageURL="c:/public/as"
InstrumentStackTraceEnabled="true"
JDBCLogFileName="myserver\jdbc.log" JDBCLoggingEnabled="false"
ListenPort="7770" LogRemoteExceptionsEnabled="true"
LoginTimeout="1000" Machine="MyMachine" Name="myserver"
NativeIOEnabled="false" ReverseDNSAllowed="false"
ServerVersion="7.0.2.0" StdoutDebugEnabled="true"
StdoutEnabled="true" StdoutSeverityLevel="32"
SystemPassword="{3DES}2LwBLCayHcc="
ThreadPoolPercentSocketReaders="99" TunnelingClientPingSecs="45"
TunnelingClientTimeoutSecs="40" TunnelingEnabled="false"
WorkspaceShowUserKeysOnly="false"
XMLEntityCache="XMLCacheMBean_myserver" XMLRegistry="company XMLRegist
<COM Name="myserver"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="myserver"/>
<JTAMigratableTarget Cluster="" Name="myserver" UserPreferredServer="
rver"/>
<JTARecoveryService Name="myserver"/>
<KernelDebug Name="myserver"/>
<Log FileMinSize="4096" FileName="myserver\company.log"
FileTimeSpan="24" Name="myserver"
NumberOfFilesLimited="true" RotationType="bySize"/>
<SSL ListenPort="7775" Name="myserver"/>
<ServerDebug Name="myserver"/>
<ServerStart Name="myserver"/>
<WebServer DefaultWebApp="go" LogFileName="myserver\access.log"
LoggingEnabled="true" Name="myserver" Targets="myserver"/>
</Server>
<ShutdownClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="600" Name="companyShutdown2"
Targets="myCluster,Server1,Server2,myserver"/>
<ShutdownClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="675" Name="TaskManagerShutdown" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.ContextHandler"
DeploymentOrder="105" FailureIsFatal="true"
Name="ContextHandlerStartup1" Targets="myserver"/>
<XMLEntityCache Name="XMLCacheMBean"/>
<XMLEntityCache Name="XMLCacheMBean_Server1"/>
<XMLEntityCache Name="XMLCacheMBean_Server2"/>
<XMLEntityCache Name="XMLCacheMBean_myserver"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactory
Name="company XMLRegistry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl" Transf
rFactory="org.apache.xalan.processor.TransformerFactoryImpl"/>
/Domain>
The managed server config.xml looks like below.
$ cat config.xml
<?xml version="1.0" encoding="UTF-8"?>
<!--Last updated on: Fri Nov 12 15:46:28 CET 2004, If your domain is active, ple
ase do not edit the config.xml file. Any changes made to that file while the dom
ain is active will not have any effect on the domain's configuration and are lik
ely to be lost. If your domain is inactive, you may edit this file with an XML e
ditor. If you do so, please refer to the BEA Weblogic Server Configuration Refer
ence documentation available from http://edocs.bea.com/wls/docs70/config_xml.
In general, we recommend that changes to your configuration file be made through
the Administration Console.-->
<Domain ConfigurationVersion="7.0.2.0" Name="company">
<Application Deployed="true" Name="AGENTMANAGER"
Path=".\deployments\activity" TwoPhase="false">
<EJBComponent DeploymentOrder="20" Name="AGENTMANAGER"
Targets="Server2" URI="AGENTMANAGER.jar"/>
</Application>
<Application Deployed="true" Name="MDBERT1"
Path=".\deployments\service" TwoPhase="false">
<EJBComponent DeploymentOrder="46" Name="MDBERT1"
Targets="Server2" URI="MDBERT1.jar"/>
</Application>
<Application Deployed="true" Name="TM" Path=".\deployments\service" TwoPhase
="false">
<EJBComponent DeploymentOrder="15" Name="TM.jar"
Targets="Server2" URI="TM.jar"/>
</Application>
</Application>
<Application Deployed="true" Name="go" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="go" Targets="Server2" URI="go"/>
</Application>
<Application Deployed="true" Name="im" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="im" Targets="Server2" URI="im"/>
</Application>
<Application Deployed="true" Name="pmcl" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="pmcl" Targets="Server2" URI="pmcl"/>
</Application>
<ApplicationManager Name="company"/>
<CachingRealm ACLCacheEnable="true" ACLCacheSize="2000"
ACLCacheTTLNegative="60" ACLCacheTTLPositive="60"
AuthenticationCacheEnable="false" AuthenticationCacheSize="211"
AuthenticationCacheTTLNegative="10"
AuthenticationCacheTTLPositive="60" BasicRealm="companyRealm"
CacheCaseSensitive="true" GroupCacheEnable="true"
GroupCacheSize="100" GroupCacheTTLNegative="60"
GroupCacheTTLPositive="60" GroupMembershipCacheTTL="17700"
Name="companyCacheRealm" PermissionCacheEnable="true"
PermissionCacheSize="211" PermissionCacheTTLNegative="10"
PermissionCacheTTLPositive="60" UserCacheEnable="true"
UserCacheSize="2000" UserCacheTTLNegative="60" UserCacheTTLPositive="60"
/>
<CustomRealm Name="companyRealm" Password="{3DES}2LwBLCayHcc=" RealmClassName
="company.appserver.weblogic.WLRealmStub"/>
<EmbeddedLDAP
Credential="{3DES}VW4H4+7OUny8Er78dGhHbIqbB6w7l9btTnLbz4Cu1jE=" Name="Cy
gent"/>
<FileRealm Name="myFileRealm"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="weblogic.jdbc.oci.Driver" InitialCapacity="5"
MaxCapacity="100" Name="Geneva0"
PreparedStatementCacheSize="100"
Properties="user=admin;password=;server=LSUP1"
Targets="Server2" URL="jdbc:weblogic:oracle"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="5"
MaxCapacity="100" Name="JMSDBConnectionPool"
PreparedStatementCacheSize="100"
Properties="user=admin;password=gent;url=jdbc:oracle:thin:@x.x.x.179:1521:SUP1;dll=ocijdbc8;dataSourceName=ejbPool;protocol=thin"
Targets="Server2" URL="jdbc:oracle:thin:@x.x.x.x:1521:LSUP1"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.xa.client.OracleXADataSource"
InitialCapacity="5" MaxCapacity="100" Name="ejbPool"
PreparedStatementCacheSize="100"
Properties="user=company_admin;url=jdbc:oracle:thin:@10.28.138.179:1521:P
MCLSUP1;password=company;dll=ocijdbc8;dataSourceName=ejbPool;protocol=thin"
SupportsLocalTransaction="true" Targets="Server2,Server2" URL="jdbc:orac
le:thin:@x.x.x.x:1521:LSUP1"/>
<JDBCDataSource JNDIName="geneva.jdbc.GenevaNonTrans0"
Name="GenevaNonTrans0" PoolName="Geneva0" Targets="Server2"/>
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="geneva.jdbc.Geneva0" Name="Geneva0" PoolName="Geneva0" Targets
="Server2"/>
<JDBCTxDataSource EnableTwoPhaseCommit="false"
JNDIName="authJtsDataSource" Name="authJtsDataSource"
PoolName="ejbPool" Targets="Server2"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.ctm.QCFactory"
Name="CTMQCFactory" Targets="Server2"
UserTransactionsEnabled="true" XAConnectionFactoryEnabled="true"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.im.QCFactory"
Name="QCFactory" Targets="Server2"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.im.TCFactory"
Name="TCFactory" Targets="Server2"/>
<JMSJDBCStore ConnectionPool="JMSDBConnectionPool"
Name="companyCTMJDBCStore" PrefixName="CTM"/>
<JMSJDBCStore ConnectionPool="JMSDBConnectionPool"
Name="companyJMSJDBCStore" PrefixName="IM"/>
<JMSServer Name="CIM JMSServer-0" Store="companyJMSJDBCStore" Targets="Server
2">
<JMSQueue JNDIName="javax.jms.inRequestQueue" Name="inRequestQueue"/>
<JMSQueue JNDIName="javax.jms.inResponseQueue" Name="inResponseQueue"/>
<JMSQueue JNDIName="javax.jms.logQueue" Name="logQueue"/>
<JMSQueue JNDIName="javax.jms.outRequestQueue" Name="outRequestQueue"/>
<JMSQueue JNDIName="javax.jms.outResponseQueue" Name="outResponseQueue"/
>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="company.service.mg.impl.InboundMsgListener"
Name="InboundRequestSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.inRequestQueue"
MessagesMaximum="10" Name="InboundRequestSessionPool" Selector="
TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="company.service.mg.impl.InboundMsgListener"
Name="InboundResponseSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.inResponseQueue"
MessagesMaximum="10"
Name="InboundResponseConnectionConsumer" Selector="TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="pmcl.company.service.mg.impl.PmclOutboundMsgListener"
Name="OutboundRequestSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.outRequestQueue"
MessagesMaximum="10"
Name="OutboundRequestConnectionPool" Selector="TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="pmcl.company.service.mg.impl.PmclOutboundMsgListener"
Name="OutboundResponseSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.outResponseQueue"
MessagesMaximum="10"
Name="OutboundResponseConnectionConsumer" Selector="TRUE"/>
</JMSSessionPool>
<JMSTopic JNDIName="javax.jms.CreateOfferTopic" Name="createOfferTopic"/
>
<JMSTopic JNDIName="javax.jms.CreateProductTopic" Name="createProductTop
ic"/>
</JMSServer>
<JMSServer Name="JMSServer-0">
<JMSQueue JNDIName="javax.jms.logQueue" Name="logQueue"/>
</JMSServer>
<JMSServer DeploymentOrder="1" Name="Task Manager Server-1"
Store="companyCTMJDBCStore" Targets="Server2">
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="activate_task"
Name="AT1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="complete_process_flow" Name="CPF1 Queue" RedeliveryL
imit="5"/>
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="complete_task"
Name="CT1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="error_task" Name="ERT1 Queue" RedeliveryLimit="1"/>
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="escalate_task"
Name="ET1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="recover_process_flow" Name="RPF1 Queue" RedeliveryLi
mit="5"/>
<JMSQueue JNDIName="terminate_process_flow" Name="TPF1 Queue" Redelivery
Limit="5"/>
<JMSQueue ErrorDestination="ERT1 Queue"
JNDIName="terminate_task" Name="TT1 Queue" RedeliveryLimit="5"/>
</JMSServer>
<JTA Name="company" TimeoutSeconds="3600"/>
<Log FileName="./logs/company.log" Name="company"/>
<Machine Name="MyMachine">
<NodeManager Name="MyMachine"/>
</Machine>
<PasswordPolicy MinimumPasswordLength="8" Name="mypasswordpolicy"/>
<Realm CachingRealm="companyCacheRealm" FileRealm="myFileRealm" Name="myRealm
"/>
<SNMPAgent Name="company"/>
<Security CompatibilityMode="true" Name="company"
PasswordPolicy="mypasswordpolicy" Realm="myRealm" RealmSetup="true"/>
<SecurityConfiguration Credential="{3DES}Osb3tCLDbyc="
CredentialGenerated="false" Name="company"/>
<Server HelpPageURL="c:/public/as" InstrumentStackTraceEnabled="true"
JDBCLogFileName="Server2\jdbc.log" JDBCLoggingEnabled="false"
ListenPort="7771" LogRemoteExceptionsEnabled="true"
LoginTimeout="1000" Machine="MyMachine" Name="Server2"
NativeIOEnabled="true" ReverseDNSAllowed="false"
ServerVersion="7.0.2.0" StdoutDebugEnabled="true"
StdoutEnabled="true" StdoutSeverityLevel="32"
SystemPassword="{3DES}2LwBLCayHcc="
ThreadPoolPercentSocketReaders="99" TunnelingClientPingSecs="45"
TunnelingClientTimeoutSecs="40" TunnelingEnabled="false"
WorkspaceShowUserKeysOnly="false"
XMLEntityCache="XMLCacheMBean_Server2" XMLRegistry="company XMLRegistry">
<COM Name="Server2"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server2"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server2" UserPreferredSer
ver="Server2"/>
<JTARecoveryService Name="Server2"/>
<KernelDebug Name="Server2"/>
<Log FileMinSize="4096" FileName="Server2\company.log"
FileTimeSpan="24" Name="Server2"
NumberOfFilesLimited="true" RotationType="bySize"/>
<SSL ListenPort="7772" Name="Server2"/>
<ServerDebug Name="Server2"/>
<ServerStart Name="Server2"/>
<WebServer DefaultWebApp="go" LogFileName="Server2\access.log"
LoggingEnabled="true" Name="Server2" Targets="Server2"/>
</Server>
<ShutdownClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="200" Name="companyShutdown2" Targets="Server2"/>
<ShutdownClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="175" Name="TaskManagerShutdown" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.ContextHandler"
DeploymentOrder="105" FailureIsFatal="true"
Name="ContextHandlerStartup1" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="100" FailureIsFatal="true"
Name="companyStartup1" Targets="Server2,Server2"/>
<StartupClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="125" FailureIsFatal="true"
Name="TaskManagerStartup" Targets="Server2"/>
<XMLEntityCache Name="XMLCacheMBean"/>
<XMLEntityCache Name="XMLCacheMBean_Server2"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactoryImp
l"
Name="company XMLRegistry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl" Transform
erFactory="org.apache.xalan.processor.TransformerFactoryImpl"/>
</Domain>
I start the admin server first followed by one of the managed servers. The admin server
starts fine. When I start the managed server 1, it is not deploying the application on the
managed server and I am getting the following exception on the managed server.
Setting custom initial context factory<Nov 25, 2004 11:54:44 PM CET> <Notice> <Management> <141053> <Application Polle
r not started for production server.>
<Nov 25, 2004 11:54:45 PM CET> <Notice> <Management> <141030> <Starting discover
y of Managed Server... This feature is on by default, you may turn this off by p
assing -Dweblogic.management.discover=false>
<Nov 25, 2004 11:54:45 PM CET> <Notice> <WebLogicServer> <000354> <Thread "Liste
nThread.Default" listening on port 7770>
<Nov 25, 2004 11:55:06 PM CET> <Warning> <RJVM> <000519> <Unable to connect to a
remote server on address x.x.x.x and port 7771 with protocol t3. The Exce
ption is java.net.ConnectException: Connection refused: connect>
<Nov 25, 2004 11:55:06 PM CET> <Warning> <Management> <141028> <Unable to locate
Managed server Server2 on listen address x.x.x.223 listen port 7771. Ignore
this message if the Managed server was shutdown intentionally. The Managed serv
er will connect to the Admin server when it is re-started.>
<Nov 25, 2004 11:55:08 PM CET> <Warning> <RJVM> <000519> <Unable to connect to a
remote server on address x.x.x.222 and port 7771 with protocol t3. The Exce
ption is java.net.ConnectException: Connection refused: connect>
<Nov 25, 2004 11:55:08 PM CET> <Warning> <Management> <141028> <Unable to locate
Managed server Server1 on listen address x.x.x.222 listen port 7771. Ignore
this message if the Managed server was shutdown intentionally. The Managed serv
er will connect to the Admin server when it is re-started.>
<Nov 25, 2004 11:55:08 PM CET> <Notice> <WebLogicServer> <000329> <Started WebLo
gic Admin Server "myserver" for domain "company" running in Production Mode>
<Nov 25, 2004 11:55:09 PM CET> <Notice> <WebLogicServer> <000365> <Server state
changed to RUNNING>
<Nov 25, 2004 11:55:09 PM CET> <Notice> <WebLogicServer> <000360> <Server starte
d in RUNNING mode>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server1,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server1,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server2,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server2,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server2,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server2,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
Can somebody help me find out why this problem is occuring..?I am having problems deploying our application to a weblogic cluster. Environment is
windows 2000/XP and weblogic 7.0 SP2.
Here's a simplified version of the cluster.
I have 2 managed servers that are part of the cluster.I have defined the managed server
configuration in the admin server's config.xml as below.
<Server Cluster="myCluster" ExpectedToRun="false" ListenPort="7771"
Machine="machine1" Name="Server1" ServerVersion="7.0.2.0"
WeblogicPluginEnabled="false" XMLEntityCache="XMLCacheMBean_Server1">
<COM Name="Server1"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server1"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server1" UserPreferred
er="Server1"/>
<JTARecoveryService Name="Server1"/>
<KernelDebug Name="Server1"/>
<Log Name="Server1"/>
<SSL Enabled="false" ListenPort="7772" Name="Server1"/>
<ServerDebug Name="Server1"/>
<ServerStart Name="Server1"/>
<WebServer Name="Server1"/>
</Server>
<Server Cluster="myCluster" ExpectedToRun="false" ListenPort="7771"
Machine="machine2" Name="Server2" ServerVersion="7.0.2.0"
WeblogicPluginEnabled="false" XMLEntityCache="XMLCacheMBean_Server2">
<COM Name="Server2"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server2"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server2" UserPreferred
er="Server2"/>
<JTARecoveryService Name="Server2"/>
<KernelDebug Name="Server2"/>
<Log Name="Server2"/>
<SSL Enabled="false" ListenPort="7772" Name="Server2"/>
<ServerDebug Name="Server2"/>
<ServerStart Name="Server2"/>
<WebServer Name="Server2"/>
</Server>
<Server AcceptBacklog="50" HelpPageURL="c:/public/as"
InstrumentStackTraceEnabled="true"
JDBCLogFileName="myserver\jdbc.log" JDBCLoggingEnabled="false"
ListenPort="7770" LogRemoteExceptionsEnabled="true"
LoginTimeout="1000" Machine="MyMachine" Name="myserver"
NativeIOEnabled="false" ReverseDNSAllowed="false"
ServerVersion="7.0.2.0" StdoutDebugEnabled="true"
StdoutEnabled="true" StdoutSeverityLevel="32"
SystemPassword="{3DES}2LwBLCayHcc="
ThreadPoolPercentSocketReaders="99" TunnelingClientPingSecs="45"
TunnelingClientTimeoutSecs="40" TunnelingEnabled="false"
WorkspaceShowUserKeysOnly="false"
XMLEntityCache="XMLCacheMBean_myserver" XMLRegistry="company XMLRegist
<COM Name="myserver"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="myserver"/>
<JTAMigratableTarget Cluster="" Name="myserver" UserPreferredServer="
rver"/>
<JTARecoveryService Name="myserver"/>
<KernelDebug Name="myserver"/>
<Log FileMinSize="4096" FileName="myserver\company.log"
FileTimeSpan="24" Name="myserver"
NumberOfFilesLimited="true" RotationType="bySize"/>
<SSL ListenPort="7775" Name="myserver"/>
<ServerDebug Name="myserver"/>
<ServerStart Name="myserver"/>
<WebServer DefaultWebApp="go" LogFileName="myserver\access.log"
LoggingEnabled="true" Name="myserver" Targets="myserver"/>
</Server>
<ShutdownClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="600" Name="companyShutdown2"
Targets="myCluster,Server1,Server2,myserver"/>
<ShutdownClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="675" Name="TaskManagerShutdown" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.ContextHandler"
DeploymentOrder="105" FailureIsFatal="true"
Name="ContextHandlerStartup1" Targets="myserver"/>
<XMLEntityCache Name="XMLCacheMBean"/>
<XMLEntityCache Name="XMLCacheMBean_Server1"/>
<XMLEntityCache Name="XMLCacheMBean_Server2"/>
<XMLEntityCache Name="XMLCacheMBean_myserver"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactory
Name="company XMLRegistry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl" Transf
rFactory="org.apache.xalan.processor.TransformerFactoryImpl"/>
/Domain>
The managed server config.xml looks like below.
$ cat config.xml
<?xml version="1.0" encoding="UTF-8"?>
<!--Last updated on: Fri Nov 12 15:46:28 CET 2004, If your domain is active, ple
ase do not edit the config.xml file. Any changes made to that file while the dom
ain is active will not have any effect on the domain's configuration and are lik
ely to be lost. If your domain is inactive, you may edit this file with an XML e
ditor. If you do so, please refer to the BEA Weblogic Server Configuration Refer
ence documentation available from http://edocs.bea.com/wls/docs70/config_xml.
In general, we recommend that changes to your configuration file be made through
the Administration Console.-->
<Domain ConfigurationVersion="7.0.2.0" Name="company">
<Application Deployed="true" Name="AGENTMANAGER"
Path=".\deployments\activity" TwoPhase="false">
<EJBComponent DeploymentOrder="20" Name="AGENTMANAGER"
Targets="Server2" URI="AGENTMANAGER.jar"/>
</Application>
<Application Deployed="true" Name="MDBERT1"
Path=".\deployments\service" TwoPhase="false">
<EJBComponent DeploymentOrder="46" Name="MDBERT1"
Targets="Server2" URI="MDBERT1.jar"/>
</Application>
<Application Deployed="true" Name="TM" Path=".\deployments\service" TwoPhase
="false">
<EJBComponent DeploymentOrder="15" Name="TM.jar"
Targets="Server2" URI="TM.jar"/>
</Application>
</Application>
<Application Deployed="true" Name="go" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="go" Targets="Server2" URI="go"/>
</Application>
<Application Deployed="true" Name="im" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="im" Targets="Server2" URI="im"/>
</Application>
<Application Deployed="true" Name="pmcl" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="pmcl" Targets="Server2" URI="pmcl"/>
</Application>
<ApplicationManager Name="company"/>
<CachingRealm ACLCacheEnable="true" ACLCacheSize="2000"
ACLCacheTTLNegative="60" ACLCacheTTLPositive="60"
AuthenticationCacheEnable="false" AuthenticationCacheSize="211"
AuthenticationCacheTTLNegative="10"
AuthenticationCacheTTLPositive="60" BasicRealm="companyRealm"
CacheCaseSensitive="true" GroupCacheEnable="true"
GroupCacheSize="100" GroupCacheTTLNegative="60"
GroupCacheTTLPositive="60" GroupMembershipCacheTTL="17700"
Name="companyCacheRealm" PermissionCacheEnable="true"
PermissionCacheSize="211" PermissionCacheTTLNegative="10"
PermissionCacheTTLPositive="60" UserCacheEnable="true"
UserCacheSize="2000" UserCacheTTLNegative="60" UserCacheTTLPositive="60"
/>
<CustomRealm Name="companyRealm" Password="{3DES}2LwBLCayHcc=" RealmClassName
="company.appserver.weblogic.WLRealmStub"/>
<EmbeddedLDAP
Credential="{3DES}VW4H4+7OUny8Er78dGhHbIqbB6w7l9btTnLbz4Cu1jE=" Name="Cy
gent"/>
<FileRealm Name="myFileRealm"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="weblogic.jdbc.oci.Driver" InitialCapacity="5"
MaxCapacity="100" Name="Geneva0"
PreparedStatementCacheSize="100"
Properties="user=admin;password=;server=LSUP1"
Targets="Server2" URL="jdbc:weblogic:oracle"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="5"
MaxCapacity="100" Name="JMSDBConnectionPool"
PreparedStatementCacheSize="100"
Properties="user=admin;password=gent;url=jdbc:oracle:thin:@x.x.x.179:1521:SUP1;dll=ocijdbc8;dataSourceName=ejbPool;protocol=thin"
Targets="Server2" URL="jdbc:oracle:thin:@x.x.x.x:1521:LSUP1"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.xa.client.OracleXADataSource"
InitialCapacity="5" MaxCapacity="100" Name="ejbPool"
PreparedStatementCacheSize="100"
Properties="user=company_admin;url=jdbc:oracle:thin:@10.28.138.179:1521:P
MCLSUP1;password=company;dll=ocijdbc8;dataSourceName=ejbPool;protocol=thin"
SupportsLocalTransaction="true" Targets="Server2,Server2" URL="jdbc:orac
le:thin:@x.x.x.x:1521:LSUP1"/>
<JDBCDataSource JNDIName="geneva.jdbc.GenevaNonTrans0"
Name="GenevaNonTrans0" PoolName="Geneva0" Targets="Server2"/>
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="geneva.jdbc.Geneva0" Name="Geneva0" PoolName="Geneva0" Targets
="Server2"/>
<JDBCTxDataSource EnableTwoPhaseCommit="false"
JNDIName="authJtsDataSource" Name="authJtsDataSource"
PoolName="ejbPool" Targets="Server2"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.ctm.QCFactory"
Name="CTMQCFactory" Targets="Server2"
UserTransactionsEnabled="true" XAConnectionFactoryEnabled="true"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.im.QCFactory"
Name="QCFactory" Targets="Server2"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.im.TCFactory"
Name="TCFactory" Targets="Server2"/>
<JMSJDBCStore ConnectionPool="JMSDBConnectionPool"
Name="companyCTMJDBCStore" PrefixName="CTM"/>
<JMSJDBCStore ConnectionPool="JMSDBConnectionPool"
Name="companyJMSJDBCStore" PrefixName="IM"/>
<JMSServer Name="CIM JMSServer-0" Store="companyJMSJDBCStore" Targets="Server
2">
<JMSQueue JNDIName="javax.jms.inRequestQueue" Name="inRequestQueue"/>
<JMSQueue JNDIName="javax.jms.inResponseQueue" Name="inResponseQueue"/>
<JMSQueue JNDIName="javax.jms.logQueue" Name="logQueue"/>
<JMSQueue JNDIName="javax.jms.outRequestQueue" Name="outRequestQueue"/>
<JMSQueue JNDIName="javax.jms.outResponseQueue" Name="outResponseQueue"/
>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="company.service.mg.impl.InboundMsgListener"
Name="InboundRequestSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.inRequestQueue"
MessagesMaximum="10" Name="InboundRequestSessionPool" Selector="
TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="company.service.mg.impl.InboundMsgListener"
Name="InboundResponseSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.inResponseQueue"
MessagesMaximum="10"
Name="InboundResponseConnectionConsumer" Selector="TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="pmcl.company.service.mg.impl.PmclOutboundMsgListener"
Name="OutboundRequestSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.outRequestQueue"
MessagesMaximum="10"
Name="OutboundRequestConnectionPool" Selector="TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="pmcl.company.service.mg.impl.PmclOutboundMsgListener"
Name="OutboundResponseSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.outResponseQueue"
MessagesMaximum="10"
Name="OutboundResponseConnectionConsumer" Selector="TRUE"/>
</JMSSessionPool>
<JMSTopic JNDIName="javax.jms.CreateOfferTopic" Name="createOfferTopic"/
>
<JMSTopic JNDIName="javax.jms.CreateProductTopic" Name="createProductTop
ic"/>
</JMSServer>
<JMSServer Name="JMSServer-0">
<JMSQueue JNDIName="javax.jms.logQueue" Name="logQueue"/>
</JMSServer>
<JMSServer DeploymentOrder="1" Name="Task Manager Server-1"
Store="companyCTMJDBCStore" Targets="Server2">
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="activate_task"
Name="AT1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="complete_process_flow" Name="CPF1 Queue" RedeliveryL
imit="5"/>
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="complete_task"
Name="CT1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="error_task" Name="ERT1 Queue" RedeliveryLimit="1"/>
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="escalate_task"
Name="ET1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="recover_process_flow" Name="RPF1 Queue" RedeliveryLi
mit="5"/>
<JMSQueue JNDIName="terminate_process_flow" Name="TPF1 Queue" Redelivery
Limit="5"/>
<JMSQueue ErrorDestination="ERT1 Queue"
JNDIName="terminate_task" Name="TT1 Queue" RedeliveryLimit="5"/>
</JMSServer>
<JTA Name="company" TimeoutSeconds="3600"/>
<Log FileName="./logs/company.log" Name="company"/>
<Machine Name="MyMachine">
<NodeManager Name="MyMachine"/>
</Machine>
<PasswordPolicy MinimumPasswordLength="8" Name="mypasswordpolicy"/>
<Realm CachingRealm="companyCacheRealm" FileRealm="myFileRealm" Name="myRealm
"/>
<SNMPAgent Name="company"/>
<Security CompatibilityMode="true" Name="company"
PasswordPolicy="mypasswordpolicy" Realm="myRealm" RealmSetup="true"/>
<SecurityConfiguration Credential="{3DES}Osb3tCLDbyc="
CredentialGenerated="false" Name="company"/>
<Server HelpPageURL="c:/public/as" InstrumentStackTraceEnabled="true"
JDBCLogFileName="Server2\jdbc.log" JDBCLoggingEnabled="false"
ListenPort="7771" LogRemoteExceptionsEnabled="true"
LoginTimeout="1000" Machine="MyMachine" Name="Server2"
NativeIOEnabled="true" ReverseDNSAllowed="false"
ServerVersion="7.0.2.0" StdoutDebugEnabled="true"
StdoutEnabled="true" StdoutSeverityLevel="32"
SystemPassword="{3DES}2LwBLCayHcc="
ThreadPoolPercentSocketReaders="99" TunnelingClientPingSecs="45"
TunnelingClientTimeoutSecs="40" TunnelingEnabled="false"
WorkspaceShowUserKeysOnly="false"
XMLEntityCache="XMLCacheMBean_Server2" XMLRegistry="company XMLRegistry">
<COM Name="Server2"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server2"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server2" UserPreferredSer
ver="Server2"/>
<JTARecoveryService Name="Server2"/>
<KernelDebug Name="Server2"/>
<Log FileMinSize="4096" FileName="Server2\company.log"
FileTimeSpan="24" Name="Server2"
NumberOfFilesLimited="true" RotationType="bySize"/>
<SSL ListenPort="7772" Name="Server2"/>
<ServerDebug Name="Server2"/>
<ServerStart Name="Server2"/>
<WebServer DefaultWebApp="go" LogFileName="Server2\access.log"
LoggingEnabled="true" Name="Server2" Targets="Server2"/>
</Server>
<ShutdownClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="200" Name="companyShutdown2" Targets="Server2"/>
<ShutdownClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="175" Name="TaskManagerShutdown" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.ContextHandler"
DeploymentOrder="105" FailureIsFatal="true"
Name="ContextHandlerStartup1" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="100" FailureIsFatal="true"
Name="companyStartup1" Targets="Server2,Server2"/>
<StartupClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="125" FailureIsFatal="true"
Name="TaskManagerStartup" Targets="Server2"/>
<XMLEntityCache Name="XMLCacheMBean"/>
<XMLEntityCache Name="XMLCacheMBean_Server2"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactoryImp
l"
Name="company XMLRegistry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl" Transform
erFactory="org.apache.xalan.processor.TransformerFactoryImpl"/>
</Domain>
I start the admin server first followed by one of the managed servers. The admin server
starts fine. When I start the managed server 1, it is not deploying the application on the
managed server and I am getting the following exception on the managed server.
Setting custom initial context factory<Nov 25, 2004 11:54:44 PM CET> <Notice> <Management> <141053> <Application Polle
r not started for production server.>
<Nov 25, 2004 11:54:45 PM CET> <Notice> <Management> <141030> <Starting discover
y of Managed Server... This feature is on by default, you may turn this off by p
assing -Dweblogic.management.discover=false>
<Nov 25, 2004 11:54:45 PM CET> <Notice> <WebLogicServer> <000354> <Thread "Liste
nThread.Default" listening on port 7770>
<Nov 25, 2004 11:55:06 PM CET> <Warning> <RJVM> <000519> <Unable to connect to a
remote server on address x.x.x.x and port 7771 with protocol t3. The Exce
ption is java.net.ConnectException: Connection refused: connect>
<Nov 25, 2004 11:55:06 PM CET> <Warning> <Management> <141028> <Unable to locate
Managed server Server2 on listen address x.x.x.223 listen port 7771. Ignore
this message if the Managed server was shutdown intentionally. The Managed serv
er will connect to the Admin server when it is re-started.>
<Nov 25, 2004 11:55:08 PM CET> <Warning> <RJVM> <000519> <Unable to connect to a
remote server on address x.x.x.222 and port 7771 with protocol t3. The Exce
ption is java.net.ConnectException: Connection refused: connect>
<Nov 25, 2004 11:55:08 PM CET> <Warning> <Management> <141028> <Unable to locate
Managed server Server1 on listen address x.x.x.222 listen port 7771. Ignore
this message if the Managed server was shutdown intentionally. The Managed serv
er will connect to the Admin server when it is re-started.>
<Nov 25, 2004 11:55:08 PM CET> <Notice> <WebLogicServer> <000329> <Started WebLo
gic Admin Server "myserver" for domain "company" running in Production Mode>
<Nov 25, 2004 11:55:09 PM CET> <Notice> <WebLogicServer> <000365> <Server state
changed to RUNNING>
<Nov 25, 2004 11:55:09 PM CET> <Notice> <WebLogicServer> <000360> <Server starte
d in RUNNING mode>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server1,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server1,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server2,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server2,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server2,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server2,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
Can somebody help me find out why this problem is occuring..? -
Difference between WLS 6.1 SP2 and SP3
I have recently tested my application in WLS 6.1 SP3 (who work normally in WLS
6.1 SP2) , I have problem with my jsp page for merging a jsp in another
What need I do to correct it ?Steven,
The CGIServlet for WebLogic will not run a CGI that doesn't have an extension.
Just add and extension to your executable and it should run fine.
jeff
"Steven" <[email protected]> wrote:
Hi all,
I am currently facing a problem with CGI binaries via CGIServlet on WLS
6.1
sp4. The web.xml file has been configured correctly as follows:
-------- start of web.xml -----------
<servlet>
<servlet-name>CGIServlet</servlet-name>
<servlet-class>weblogic.servlet.CGIServlet</servlet-class>
<init-param>
<param-name>cgiDir</param-name>
<param-value>/web/bea6.1sp2/wlserver6.1/config/ngwapp/applications/NGWWebApp
/cgi-bin</param-value>
</init-param>
<init-param>
<param-name>*.pl</param-name>
<param-value>/web/perl5/bin/perl5.00405</param-value>
</init-param>
<init-param>
<param-name>*.cgi</param-name>
<param-value>/web/perl5/bin/perl5.00405</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>CGIServlet</servlet-name>
<url-pattern>/cgi-bin/*</url-pattern>
</servlet-mapping>-------- end of web.xml ---------
When a call is made to http://.../cgi-bin/dialogserver , this results
in a
404-File Not Found error.
The contents of the cgi-bin directory have not been altered and I did
not
face this problem earlier when I was using sp2.
It only happened after I upgraded to sp4. Can anyone help?
best rgds,
steven. -
WLS 6.1 SP2 NSAPI and iPlanet (Sun One) issues
Hi. I am going nuts with this NSAPI issue. I am working in a Solaris 8 environment,
WLS 6.1 SP2 and iPlanet (Sun One)and NSAPI. I can get everything to work fine
and dandy in aniPlanet 4.1 environment. I can not get it to work in an Iplanet
(Sun One) 6.x environment. It appears that some things work differently between
the versions of iPlanet (ie. things contained in magnus.conf and/or obj.conf).
I have tried moving things, removing things, adding things and nothing seems
to work....it's almost as though the NSAPI, etc. are being ignored.
I've attached my magnus.conf and obj.conf files (I cut and pasted them into a
single file so I could upload it). Can anyone help me out here...I've been working
for weeks on this and can't seem to get any answers.
Thanks!
Doug
P.S. For security purpses I changed the first part of the IP add. in the files
to 1234567, etc.
Thanks
[conf_files.txt]Hi Doug
U have to put the following section
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib="./libproxy.so"
Init fn="wl_init"
into magus.conf
and put the rest into obj.conf
Best Regards
Alex
"Doug E" <[email protected]> wrote:
>
Does anybody know of a good reference document on how to properly install
the NSAPI
plug-in for WLS6.1 & iPlanet6(SunOne) on Unix (Solaris). Many of the references
that
I have been finding are either incomplete, have typo's and are mostly Windows
oriented
(ie. with the .dll's, paths, examples, etc.)
My problem is that our old iPlanet 4.x works fine...everything proxies,
etc. iPlanet
6 just doesn't want to seem to communicate with WLS 6.1 SP2 We tried many
of the
saem things from the 4.x magnus & obj.confs...but things look somewhat different
in iPlanet 6.x (did they move tings..such as the fn's from one to the other,
etc.)
If so..and there are big differences in installing iPlanet 4.x vs. 6.x
then many
of the docs out there are inaccurate. Does anyone know if there is a newer
version
of the NSAPI plug-in for Unix.
I would love to see a basic, working set of magnus.conf obj.conf, MIME,etc
from someone
who has actually gotten NSAPI to work between WLS 6.1 and iPlanet 6 on Unix
(Solaris)
It blows my mind that 4.x works and 6.x doesn't. An updated NSAPI plug-in
, if it exists and perhaps fixes the problem, would make my day. Any ideas?
Thanks!
-Doug -
Iplanet 6.x, NSAP & WLS 6.1 SP2
This is very strange. I can get NSAPI with iplanet 4.x to come up fine (everything proxies, etc. as it should). When we try to get iPlane 6.x working with NSAPI and WLS 6.1 SP2...nothing..doesn't work. We're running everything on Solaris.
Does anyone have or know of some good documentation that might describe how to get NSAPI working between WLS 6.1 and iPlanet 6...all the examples I've been seeing are mostly Windows paths, .dlls', etc. I'd love to see some working magnus.conf & obj.conf, etc. using WLS6.1 SP2 and iPlanet 6...we're not clustered and we're not using SSL (yet) so it's pretty vanilla.
What's blowing my mind is why iplanet 4.x works and 6.x doesn;t?? I wonder if the differences between the two are really that great. I checked BEA's doc...and like I said...it seemed a bit cryptic...someone told me ther was a typo or two regarding what was to go in magnus or was it obj.conf...I don't recall..it's just frustrating trying to get NSAPI up and running with WLS 6.1 SP2 and iPlanet 6. Any ideas? Thanks!!Thanks Kumar. Does the syntax change (such as WebLogicCluster=xxxxxxxxxxxxxxx) if
we are running a single instance of WebLogic (a non-clustered environment)?
Thanks,
Doug
Kumar Allamraju <[email protected]> wrote:
In iplanet 6.x
magnus.conf should have
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib=/usr/local/netscape/plugins/libproxy.so
Init fn="wl_init"
and obj.conf should have
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl_proxy \
WebLogicCluster="myweblogic.com:7001,yourweblogic.com:7001,\
theirweblogic.com:7001" PathTrim="/weblogic"
</Object>
Pls post the exact errors that you are seeing, so that we can help
Kumar
"Doug E." wrote:
This is very strange. I can get NSAPI with iplanet 4.x to come up fine(everything proxies, etc. as it should). When we try to get iPlane 6.x
working with NSAPI and WLS 6.1 SP2...nothing..doesn't work. We're running
everything on Solaris.
Does anyone have or know of some good documentation that might describehow to get NSAPI working between WLS 6.1 and iPlanet 6...all the examples
I've been seeing are mostly Windows paths, .dlls', etc. I'd love to see
some working magnus.conf & obj.conf, etc. using WLS6.1 SP2 and iPlanet
6...we're not clustered and we're not using SSL (yet) so it's pretty vanilla.
What's blowing my mind is why iplanet 4.x works and 6.x doesn;t?? I wonderif the differences between the two are really that great. I checked BEA's
doc...and like I said...it seemed a bit cryptic...someone told me ther
was a typo or two regarding what was to go in magnus or was it obj.conf...I
don't recall..it's just frustrating trying to get NSAPI up and running
with WLS 6.1 SP2 and iPlanet 6. Any ideas? Thanks!! -
WLS 6.0 and Iplanet 4.1 proxy problems
Could someone confirm what is the latest version of IPlanet webserver
that is supported under WLS 6.0 SP2.
We are running under AIX 4.3.3 and have a Iplanet 4.0 sp4 webserver
running a connection to a backend WLS 6.0 sp2 instance also on AIX.
We are also running the libproxy_4x.so wl proxy file which allows us
to specify which IP in the obj.conf to have WLS 6.0 respond to vs. the
default ip on the server. The webserver runs on an aliased IP address
and due to firewall restrictions we must have WLS 6.0 talk back to the
IP that called the wl proxy. This does work correctly.
We have tried to duplicate this configuration under IPlanet 4.1 sp8
and we are getting the following errors with the wl proxy file:
[13/Oct/2001:03:42:15] failure (20564): for host x.x.x.x trying to GET
/testpath, wl-proxy reports: exception occurred for backend host
'x.x.x.x/6100': 'CONNECTION_REFUSED [os error=78, line 1282 of
URL.cpp]: x.x.x.x:6100'
This leads me to believe that it is the version of IPlanet server that
is causing the problem when it is calling the wl proxy. If someone is
running Iplanet 4.1 on AIX and using the wl proxy could you reply with
which service pack for Iplanet 4.1 works. We need to upgrade our
IPlanet to the latest version that will work with this configuration.
Any help would be appreciated.
Thanks,
Jamin Kumelski
Internet System Administrator
AdvancePCSI have a question. Will WebLogic only listen to connections being
established from NES on the aliased IP? From what it looks like, with the
version of NES that you have, the NSAPI plugin is trying to establish a
connection to Weblogic on the primary IP, not the aliased IP.
There was a new feature added to the NES Plugin that allows you to bind the
plugin to a certain IP address in the case that you are using an IP Alias.
When the plugin makes a connection to WebLogic, it will first bind to the
specified IP address in the obj.conf.
The new parameter is: WLLocalIP.
I do believe the latest service pack for 6.1 (SP01) has the AIX plugin that
has this new parameter.
Regards,
Eric
BEA WebLogic
"Jamin Kumelski" <[email protected]> wrote in message
news:[email protected]...
Could someone confirm what is the latest version of IPlanet webserver
that is supported under WLS 6.0 SP2.
We are running under AIX 4.3.3 and have a Iplanet 4.0 sp4 webserver
running a connection to a backend WLS 6.0 sp2 instance also on AIX.
We are also running the libproxy_4x.so wl proxy file which allows us
to specify which IP in the obj.conf to have WLS 6.0 respond to vs. the
default ip on the server. The webserver runs on an aliased IP address
and due to firewall restrictions we must have WLS 6.0 talk back to the
IP that called the wl proxy. This does work correctly.
We have tried to duplicate this configuration under IPlanet 4.1 sp8
and we are getting the following errors with the wl proxy file:
[13/Oct/2001:03:42:15] failure (20564): for host x.x.x.x trying to GET
/testpath, wl-proxy reports: exception occurred for backend host
'x.x.x.x/6100': 'CONNECTION_REFUSED [os error=78, line 1282 of
URL.cpp]: x.x.x.x:6100'
This leads me to believe that it is the version of IPlanet server that
is causing the problem when it is calling the wl proxy. If someone is
running Iplanet 4.1 on AIX and using the wl proxy could you reply with
which service pack for Iplanet 4.1 works. We need to upgrade our
IPlanet to the latest version that will work with this configuration.
Any help would be appreciated.
Thanks,
Jamin Kumelski
Internet System Administrator
AdvancePCS -
WLS 7.0 sp2 - Servlet Problems with SOAP messages
I'm using Weblogic 7.0 SP2 and trying to create a Servlet to receive SOAP wrapped
XML messages. I'm getting the following error. Is this a problem with WLS7.0sp2's
support of JAXM? The System.out.println's indicate I have successfully received
the incoming SOAP request and then successfully formatted the SOAP response, but
upon returning saving the response it appears to blow up. Does anyone have any
suggestions?
I need to do the following in a servlet:
- receive an incoming SOAP request with an embedded XML message
- perform some processing
- return a SOAP response with an embedded XML message
Should I be using JAXM? Or can I do this same task easily with JAX-RPC?
<Feb 24, 2004 4:10:42 PM AST> <Error> <HTTP> <101017> <[ServletContext(id=260434
7,name=isd.war,context-path=)] Root cause of ServletException
java.lang.Error: NYI
at weblogic.webservice.core.soap.SOAPMessageImpl.saveRequired(SOAPMessag
eImpl.java:360)
at javax.xml.messaging.JAXMServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
I've stripped the code down so that all it does is verifies the incoming SOAP/XML
request and creates a hard-coded response... be gentle... I'm a novice at this
import javax.xml.soap.*;
import javax.servlet.*;
import javax.servlet.http.*;
// import javax.xml.transform.*;
import java.util.*;
import java.io.*;
public class RegisterServlet extends HttpServlet
static MessageFactory fac = null;
static
try
fac = MessageFactory.newInstance();
catch (Exception ex)
ex.printStackTrace();
public void init(ServletConfig servletConfig) throws ServletException
super.init(servletConfig);
public void doPost(HttpServletRequest req, HttpServletResponse resp) throws ServletException,
IOException
try
System.out.println("** Note: doPost() Entering req = " + req);
// Get all the headers from the HTTP request
MimeHeaders headers = getHeaders(req);
// Get the body of the HTTP request
InputStream is = req.getInputStream();
// Now internalize the contents of a HTTP request
// and create a SOAPMessage
SOAPMessage msg = fac.createMessage(headers, is);
System.out.println("** Note: doPost() Step A");
SOAPMessage reply = null;
reply = onMessage(msg);
System.out.println("** Note: doPost() Step B reply = " + reply);
if (reply != null)
* Need to call saveChanges because we're
* going to use the MimeHeaders to set HTTP
* response information. These MimeHeaders
* are generated as part of the save.
if (reply.saveRequired())
System.out.println("** Note: doPost() Step C reply.saveRequired()");
reply.saveChanges();
resp.setStatus(HttpServletResponse.SC_OK);
putHeaders(reply.getMimeHeaders(), resp);
// Write out the message on the response stream
OutputStream os = resp.getOutputStream();
System.out.println("** Note: doPost() Step D os = " + os);
reply.writeTo(os);
os.flush();
else
resp.setStatus(HttpServletResponse.SC_NO_CONTENT);
catch (Exception ex)
throw new ServletException("** Error: SAAJ POST failed: " + ex.getMessage());
static MimeHeaders getHeaders(HttpServletRequest req)
Enumeration enum = req.getHeaderNames();
MimeHeaders headers = new MimeHeaders();
while (enum.hasMoreElements())
String headerName = (String)enum.nextElement();
String headerValue = req.getHeader(headerName);
StringTokenizer values =
new StringTokenizer(headerValue, ",");
while (values.hasMoreTokens())
headers.addHeader(headerName,
values.nextToken().trim());
return headers;
static void putHeaders(MimeHeaders headers, HttpServletResponse res)
Iterator it = headers.getAllHeaders();
while (it.hasNext())
MimeHeader header = (MimeHeader)it.next();
String[] values = headers.getHeader(header.getName());
if (values.length == 1)
res.setHeader(header.getName(),
header.getValue());
else
StringBuffer concat = new StringBuffer();
int i = 0;
while (i < values.length)
if (i != 0)
concat.append(',');
concat.append(values[i++]);
res.setHeader(header.getName(), concat.toString());
// This is the application code for handling the message.
public SOAPMessage onMessage(SOAPMessage message)
SOAPMessage replymsg = null;
try
System.out.println("** Note: OnMessage() Entering msg = " + message);
//Extract the ComputerPart element from request message and add to reply SOAP
message.
SOAPEnvelope reqse = message.getSOAPPart().getEnvelope();
SOAPBody reqsb = reqse.getBody();
//System.out.println("** Note: OnMessage() Step B");
System.out.println("** Note: OnMessage () Step A Soap Request Message Body = "
+ reqsb);
//Create a reply mesage from the msgFactory of JAXMServlet
System.out.println("** Note: OnMessage () Step B");
replymsg = fac.createMessage();
SOAPPart sp = replymsg.getSOAPPart();
SOAPEnvelope se = sp.getEnvelope();
SOAPBody sb = se.getBody();
System.out.println("** Note: OnMessage () Step C Soap Reply Before Message Body
= " + sb);
se.getBody().addBodyElement(se.createName("RegisterResponse")).addChildElement(se.createName("ErrorCode")).addTextNode("000");
System.out.println("** Note: OnMessage () Step D Soap Reply After Message Body
= " + sb);
replymsg.saveChanges();
System.out.println("** Note: OnMessage() Exiting replymsg = " + (replymsg));
catch (Exception ex)
ex.printStackTrace();
return replymsg;
Michael,
I got the same error on WLS8.1/Win2K professional and apache FOP (old version).
After digging into the WLS code and FOP(old version). i found the conflict happens
on
the "org.xml.sax.parser" system property. In WLS code, they hard coded like the
following when startup weblogic server:
System.setProperty("org.xml.sax.parser", "weblogic.xml.jaxp.RegistryParser");
But the FOP code try to use the "org.xml.sax.parser" system property to find the
sax parser then conlict happens.
Here is the response from BEA support :
"I consulted with our developers regarding the question of whether we can change
the hard-coded value for the java system property: org.xml.sax.parser by using
a configuration parameter and I found that unfortunately there is no specific
setting to change the value. As you had mentioned in your note the org.xml.sax.parser
system property can be changed programmatically in your application code."
I solve my problem by using newer apache FOP (it never use the system property:org.xml.sax.parser
any more) and XML Registy for WLS8.1.
Good luck.
David Liu
Point2 Technologies Inc.
"p_michael" <[email protected]> wrote:
>
Help.
When we migrated from WLS 6.1 to WLS 7.0 SP2 when encountered a problem
with XML
parsing that did not previously exist.
We get the error "weblogic.xml.jaxp.RegistryParser is not a SAX driver".
What does this mean? And, what should we do about it.
p_michael -
WLS 6.1 SP2 and Struts 1.1b3 Manifest Problem
When I try to deploy the struts-example.war or if I add the struts.jar
to any other web app I've created, I get this error when I start WLS and it
tries to deploy that war.
java.lang.StringIndexOutOfBoundsException
at weblogic.servlet.internal.WebAppHelper.resolveManifestName
(WebAppHelper.java:469)
I'm using version 1.1b3 of struts. I'm having no problems with version
1.0.2 of struts.
I'm guessing its complaining about the manifest file in struts.jar, but I
don't understand why.
Here's my version info and the stack trace (my web app is called findme in
this example). Thanks in advance.
-Phil
Server BuildWebLogic Server 6.1 SP2 12/18/2001 11:13:46 #154529
All Server Product VersionsWebLogic Server 6.1 SP2 12/18/2001 11:13:46
#154529 WebLogic XML Module 6.1 SP2 12/18/2001 11:28:02 #154529
<Feb 11, 2003 7:45:25 AM EST> <Error> <J2EE> <Error deploying application
findme: Could not load findme>
<Feb 11, 2003 7:45:25 AM EST> <Error> <Management> <ApplicationManager
starting Config caught throwable
java.lang.reflect.UndeclaredThrowableException:
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1525)
at
weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper.jav
a:469)
at
weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:
234)
at
weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebAppServ
letContext.java:3407)
at
weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServletCont
ext.java:3376)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.ja
va:862)
at
weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.
java:815)
at
weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:428)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment
Target.java:329)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment
Target.java:144)
at
weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java
:76)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp
l.java:636)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:
621)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe
anImpl.java:359)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy29.addWebDeployment(Unknown Source)
at
weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployme
nt(WebServerMBean_CachingStub.java:1121)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment
Target.java:315)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deploymen
tTarget.java:279)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(
DeploymentTarget.java:233)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploy
mentTarget.java:193)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp
l.java:636)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:
621)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe
anImpl.java:359)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy28.updateDeployments(Unknown Source)
at
weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments
(ServerMBean_CachingStub.java:2761)
at
weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(App
licationManager.java:370)
at
weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManag
er.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp
l.java:636)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:
621)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe
anImpl.java:359)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy36.start(Unknown Source)
at
weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start
(ApplicationManagerMBean_CachingStub.java:480)
at
weblogic.management.Admin.startApplicationManager(Admin.java:1180)
at weblogic.management.Admin.finish(Admin.java:590)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:518)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
--------------- nested within: ------------------
weblogic.j2ee.DeploymentException: Could not load findme - with nested
exception:
[java.lang.StringIndexOutOfBoundsException: String index out of range: -1]
at
weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:431)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment
Target.java:329)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment
Target.java:144)
at
weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java
:76)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp
l.java:636)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:
621)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe
anImpl.java:359)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy29.addWebDeployment(Unknown Source)
at
weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployme
nt(WebServerMBean_CachingStub.java:1121)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment
Target.java:315)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deploymen
tTarget.java:279)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(
DeploymentTarget.java:233)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploy
mentTarget.java:193)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp
l.java:636)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:
621)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe
anImpl.java:359)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy28.updateDeployments(Unknown Source)
at
weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments
(ServerMBean_CachingStub.java:2761)
at
weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(App
licationManager.java:370)
at
weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManag
er.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp
l.java:636)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:
621)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe
anImpl.java:359)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy36.start(Unknown Source)
at
weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start
(ApplicationManagerMBean_CachingStub.java:480)
at
weblogic.management.Admin.startApplicationManager(Admin.java:1180)
at weblogic.management.Admin.finish(Admin.java:590)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:518)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
>
<Feb 11, 2003 7:45:32 AM EST> <Error> <J2EE> <Error deploying application
struts-example: Could notload struts-example>
<Feb 11, 2003 7:45:32 AM EST> <Error> <Management> <Error deploying
application .\config\mydomain\applications\struts-example.war:
java.lang.reflect.UndeclaredThrowableException>I've solved my own problem. I learned that there was a sp4 (let alone a
sp3) for WLS. Installed that and the problem went away. Sorry for the
noise.
-Phil
Philip Bower <[email protected]> wrote in
news:[email protected]:
When I try to deploy the struts-example.war or if I add the struts.jar
to any other web app I've created, I get this error when I start WLS
and it tries to deploy that war.
java.lang.StringIndexOutOfBoundsException
at weblogic.servlet.internal.WebAppHelper.resolveManifestName
(WebAppHelper.java:469)
I'm using version 1.1b3 of struts. I'm having no problems with
version 1.0.2 of struts.
I'm guessing its complaining about the manifest file in struts.jar,
but I don't understand why.
Here's my version info and the stack trace (my web app is called
findme in this example). Thanks in advance.
-Phil
Server BuildWebLogic Server 6.1 SP2 12/18/2001 11:13:46 #154529
All Server Product VersionsWebLogic Server 6.1 SP2 12/18/2001
11:13:46 #154529 WebLogic XML Module 6.1 SP2 12/18/2001 11:28:02
#154529
<Feb 11, 2003 7:45:25 AM EST> <Error> <J2EE> <Error deploying
application findme: Could not load findme>
<Feb 11, 2003 7:45:25 AM EST> <Error> <Management> <ApplicationManager
starting Config caught throwable
java.lang.reflect.UndeclaredThrowableException:
java.lang.StringIndexOutOfBoundsException: String index out of range:
-1
at java.lang.String.substring(String.java:1525)
at
weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper
.jav a:469)
at
weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.j
ava: 234)
at
weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebApp
Serv letContext.java:3407)
at
weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServlet
Cont ext.java:3376)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContex
t.ja va:862) -
Hi
I have developed an appliaction using wls 6.1 sp2 on w2k, which I want to migrate
to Solaris 8.
I have modified my windows statup scripts to Solaris, but I get a strange error
when starting weblogic. I am starting the server as root and my weblogic.policy
file is modified according to my installation.
Has anybody encountered anything similar?
<Feb 20, 2002 12:08:09 PM CET> <Critical> <Management> <Unable to deploy an internal
management web application - <all-internal-apps>. Managed servers may be unable
to start.
java.io.FileNotFoundException: ./config/Certifikat/.wlstaging/wl_management_internal2.war
(No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at java.io.FileOutputStream.<init>(FileOutputStream.java:62)
at java.io.FileOutputStream.<init>(FileOutputStream.java:132)
at weblogic.management.mbeans.custom.ApplicationManager.stageGlobalWarFile(ApplicationManager.java:398)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:334)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:152)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy35.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:479)
at weblogic.management.Admin.startApplicationManager(Admin.java:1138)
at weblogic.management.Admin.finish(Admin.java:561)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:501)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:198)
at weblogic.Server.main(Server.java:35)
>
My startup script is as follows
bash-2.03$ more startWeblogic.sh
#!/usr/bin/bash
# Set user-defined variables.
export PROJECT=postdanmark
export ENVIRONMENT=test
export RELEASE_DIR=/opt/projects/$PROJECT/$ENVIRONMENT/lib
export JAVA_HOME=/opt/jdk/j2sdk1_3_1_02
export WEBLOGIC_HOME=/opt/bea/weblogic/6.1
export PATH=$WEBLOGIC_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:.:$PATH
export CLASSPATH=$RELEASE_DIR/internal/util/1.0/Util.jar
export CLASSPATH=$CLASSPATH:$WEBLOGIC_HOME/lib/weblogic.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/sun/jaxb/1.0ea/lib/jaxb-rt-1.0-ea.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/postdanmark/1.0/PostDanmarkPC.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/EntrustCAEjb/1.0/EntrustCAEjb.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/websupport/1.0/WebSupport.jar
export CLASSPATH=$CLASSPATH:/opt/projects/$PROJECT/$ENVIRONMENT/batch/properties
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/corba/interfaces/entrustca/1.2/EntrustCA.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/mysql/jdbc/2.0.4/mm.mysql-2.0.4-bin.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entbase.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entuser.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entp7.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entmisc.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entcertlist.jar
echo off
echo *********************************************
echo * Starting weblogic application server *
echo *********************************************
# Set WLS_PW equal to your system password for no password prompt server startup.
export WLS_PW=certifikat
# Set Production Mode. When set to true, the server starts up in production mode.
When set to false, the server starts up i
n development mode. The default is false.
export STARTMODE=false
export WEBLOGIC_OPTIONS='-Dweblogic.Domain=Certifikat'
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.Name=PostDanmarkServer"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.discover=false"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dbea.home=/opt/bea/weblogic/6.1"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.home=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.dir=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.password=$WLS_PW"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.ProductionModeEnabled=$STARTMODE"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.security.policy=$WEBLOGIC_HOME/lib/weblogic.policy"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.RootDirectory=/opt/projects/$PROJECT/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.util.logging.config.file=/opt/projects/$PROJECT/$ENVIRONMENT/batch/proper
ties/logging.properties"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.library.path=$WEBLOGIC_HOME/lib/solaris:$WEBLOGIC_HOME/lib/solaris/oci816
_8"
export JAVA_OPTIONS='-hotspot -ms64m -mx64m -classpath '
export JAVA_OPTIONS=${JAVA_OPTIONS}$CLASSPATH
echo on
echo "using JAVA OPTIONS : "$JAVA_OPTIONS"
echo "using WEBLOGIC OPTIONS : "$WEBLOGIC_OPTIONS"
"$JAVA_HOME/bin/java" $JAVA_OPTIONS $WEBLOGIC_OPTIONS weblogic.ServerHi.
Try placing the wl_management_internal2.war file from the mydomain/.wlstaging directory into the directory your server is expecting.
Regards,
Michael
Peter Buus wrote:
Hi
I have developed an appliaction using wls 6.1 sp2 on w2k, which I want to migrate
to Solaris 8.
I have modified my windows statup scripts to Solaris, but I get a strange error
when starting weblogic. I am starting the server as root and my weblogic.policy
file is modified according to my installation.
Has anybody encountered anything similar?
<Feb 20, 2002 12:08:09 PM CET> <Critical> <Management> <Unable to deploy an internal
management web application - <all-internal-apps>. Managed servers may be unable
to start.
java.io.FileNotFoundException: ./config/Certifikat/.wlstaging/wl_management_internal2.war
(No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at java.io.FileOutputStream.<init>(FileOutputStream.java:62)
at java.io.FileOutputStream.<init>(FileOutputStream.java:132)
at weblogic.management.mbeans.custom.ApplicationManager.stageGlobalWarFile(ApplicationManager.java:398)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:334)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:152)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy35.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:479)
at weblogic.management.Admin.startApplicationManager(Admin.java:1138)
at weblogic.management.Admin.finish(Admin.java:561)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:501)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:198)
at weblogic.Server.main(Server.java:35)
>
My startup script is as follows
bash-2.03$ more startWeblogic.sh
#!/usr/bin/bash
# Set user-defined variables.
export PROJECT=postdanmark
export ENVIRONMENT=test
export RELEASE_DIR=/opt/projects/$PROJECT/$ENVIRONMENT/lib
export JAVA_HOME=/opt/jdk/j2sdk1_3_1_02
export WEBLOGIC_HOME=/opt/bea/weblogic/6.1
export PATH=$WEBLOGIC_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:.:$PATH
export CLASSPATH=$RELEASE_DIR/internal/util/1.0/Util.jar
export CLASSPATH=$CLASSPATH:$WEBLOGIC_HOME/lib/weblogic.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/sun/jaxb/1.0ea/lib/jaxb-rt-1.0-ea.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/postdanmark/1.0/PostDanmarkPC.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/EntrustCAEjb/1.0/EntrustCAEjb.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/websupport/1.0/WebSupport.jar
export CLASSPATH=$CLASSPATH:/opt/projects/$PROJECT/$ENVIRONMENT/batch/properties
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/corba/interfaces/entrustca/1.2/EntrustCA.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/mysql/jdbc/2.0.4/mm.mysql-2.0.4-bin.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entbase.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entuser.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entp7.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entmisc.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entcertlist.jar
echo off
echo *********************************************
echo * Starting weblogic application server *
echo *********************************************
# Set WLS_PW equal to your system password for no password prompt server startup.
export WLS_PW=certifikat
# Set Production Mode. When set to true, the server starts up in production mode.
When set to false, the server starts up i
n development mode. The default is false.
export STARTMODE=false
export WEBLOGIC_OPTIONS='-Dweblogic.Domain=Certifikat'
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.Name=PostDanmarkServer"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.discover=false"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dbea.home=/opt/bea/weblogic/6.1"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.home=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.dir=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.password=$WLS_PW"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.ProductionModeEnabled=$STARTMODE"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.security.policy=$WEBLOGIC_HOME/lib/weblogic.policy"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.RootDirectory=/opt/projects/$PROJECT/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.util.logging.config.file=/opt/projects/$PROJECT/$ENVIRONMENT/batch/proper
ties/logging.properties"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.library.path=$WEBLOGIC_HOME/lib/solaris:$WEBLOGIC_HOME/lib/solaris/oci816
_8"
export JAVA_OPTIONS='-hotspot -ms64m -mx64m -classpath '
export JAVA_OPTIONS=${JAVA_OPTIONS}$CLASSPATH
echo on
echo "using JAVA OPTIONS : "$JAVA_OPTIONS"
echo "using WEBLOGIC OPTIONS : "$WEBLOGIC_OPTIONS"
"$JAVA_HOME/bin/java" $JAVA_OPTIONS $WEBLOGIC_OPTIONS weblogic.Server--
Michael Young
Developer Relations Engineer
BEA Support -
Wls 7.0 sp2 proxy plugin issue with iplanet6.x and wls 6.1 sp3 app server
Hi,
I've a setup with iplanet 6.x webserver using the wls 7.0 sp2 proxy plugin to
route requests to the clustered app server instances (2 of them) that are in wls
6.1 sp3.
The issue is, I'm noticing that the session is not sticky and is getting routed
onto the other app server instance. The error that I see in the wlproxy.log is
as follows:
*******Exception type [PROTOCOL_ERROR] raised
at line 654 of URL.cpp
Thu Nov 13 11:30:08 2003 failure on sendRequest() w/ recycled connection
to Instance1:7001, numfailures=1
Thu Nov 13 11:30:08 2003 Marking Instance1:7001 as bad
Thu Nov 13 11:30:08 2003 got exception in sendRequest phase:
PROTOCOL_ERROR [line 654 of URL.cpp]: unexpected EOF
reading HTTP status at line 1010
Thu Nov 13 11:30:08 2003 Failing over after sendRequest exception
Thu Nov 13 11:30:08 2003 attempt #1 out of a max of 5
Has anyone seen this issue? Can anyone explain why this issue is occuring.?
Thanks.Did you find a solution for this problem?
I have somthing very similar going on where I am currently working.
Thanks!
Andy.
"Simple Guy" <[email protected]> wrote:
>
Hi,
I've a setup with iplanet 6.x webserver using the wls 7.0 sp2 proxy plugin
to
route requests to the clustered app server instances (2 of them) that
are in wls
6.1 sp3.
The issue is, I'm noticing that the session is not sticky and is getting
routed
onto the other app server instance. The error that I see in the wlproxy.log
is
as follows:
*******Exception type [PROTOCOL_ERROR] raised
at line 654 of URL.cpp
Thu Nov 13 11:30:08 2003 failure on sendRequest() w/ recycled connection
to Instance1:7001, numfailures=1
Thu Nov 13 11:30:08 2003 Marking Instance1:7001 as bad
Thu Nov 13 11:30:08 2003 got exception in sendRequest phase:
PROTOCOL_ERROR [line 654 of URL.cpp]: unexpected EOF
reading HTTP status at line 1010
Thu Nov 13 11:30:08 2003 Failing over after sendRequest exception
Thu Nov 13 11:30:08 2003 attempt #1 out of a max of 5
Has anyone seen this issue? Can anyone explain why this issue is occuring.?
Thanks. -
Re: WLS 6.0 SP2 hangs due to many sockets in CLOSE_WAIT state
We have the same issue with HPUX and Weblogic 5.1 SP8. In fact, we get
errors on the ListenThread because occasionally it (the ListenThread)
says too many files open. Running a monitoring tool - the process
typically only has ~130 file handles open at any time. When we start
getting a lot of sockets "stuck" in close_wait state the number of open
files increases dramatically occasionally freezing the server until (I
believe) the OS steps in and cleans house.
For those curious, our box is configured to have a max of 1024 files
open. Please don't even suggest that we raise that parameter because it
is already high enough.
We are tempted to use apache as the webserver and proxy request through
apache to weblogic. Apache doesn't suffer from this issue AFAIK.
-Tim
sogal nagavardhan wrote:
Hi !!
We are using weblogic 6.0 SP2 with jdk1.3.1 running on windows 2000 platform.
Currently we are using running some stablity tests and noticing that there are
lot of sockets in close_wait state and handle count keeps going up and eventually
crashes the weblogic. We also tried reducing the TcpTimedWaitDelay as suggested
in this newsgroup, and we are still noticing this problem. Does any body have
the same issue?. is this a know problem with weblogic http server?. and finally
any fixes or workarounds to this issue.
Thanks
Sogal.NBEA acknowledges this problem in 6.0 SP2 with iPlanet plug-in.
Solution that they recommend is to use 6.1 SP2 plug-in (they claim
full compatibility). Also, you may have to set KeepAliveEnabled to
false in obj.conf (the problem is in wrong pooling).
Hope it helps,
Bala
Robert Patrick <[email protected]> wrote in message news:<[email protected]>...
There are a couple of issues.
1.) You need to tune the machine running the web server and the machine
running WebLogic to make sure that it is configured appropriately for a
high-volume HTTP server. See
http://e-docs.bea.com/wls/platforms/sun/index.html for details on tuning
Solaris.
2.) I believe that there is a bug in the plugins in 6.0 where it is not
properly closing sockets. Try using the plugin from WLS 6.1 SP2...
Hope this helps,
Robert
Kevin Phillips wrote:
Tim Funk <[email protected]> wrote:
I am experiencing similar problems with WL 6.0 SP2 on Solaris 2.6.
We are already proxying all HTTP traffic through a
cluster of apache servers. Unfortuantely, the apache-WL
bridge seems to work so efficiently that our servers are
still flooded with open sockets in the TCP_CLOSE_WAIT state.
It seems to be bound by WebLogic's capacity to respond to
the requests in a speedy enough fashion.
Anybody have any suggestions?
Kevin
We have the same issue with HPUX and Weblogic 5.1 SP8. In fact, we get
errors on the ListenThread because occasionally it (the ListenThread)
says too many files open. Running a monitoring tool - the process
typically only has ~130 file handles open at any time. When we start
getting a lot of sockets "stuck" in close_wait state the number of open
files increases dramatically occasionally freezing the server until (I
believe) the OS steps in and cleans house.
For those curious, our box is configured to have a max of 1024 files
open. Please don't even suggest that we raise that parameter because
it
is already high enough.
We are tempted to use apache as the webserver and proxy request through
apache to weblogic. Apache doesn't suffer from this issue AFAIK.
-Tim
sogal nagavardhan wrote:
Hi !!
We are using weblogic 6.0 SP2 with jdk1.3.1 running on windows 2000
platform.
Currently we are using running some stablity tests and noticing that
there are
lot of sockets in close_wait state and handle count keeps going up
and eventually
crashes the weblogic. We also tried reducing the TcpTimedWaitDelay
as suggested
in this newsgroup, and we are still noticing this problem. Does any
body have
the same issue?. is this a know problem with weblogic http server?.
and finally
any fixes or workarounds to this issue.
Thanks
Sogal.N -
Hi!
We need to implement authentication using our own methods, and the authentication
information is provided to the web service implementation in a basic authentication
header. The problem is, that the servlet
weblogic.webservice.server.servlet.WebServiceServlet, which handles web services
in
wls 7.0.sp2, always attempts to perform authentication, if the header is present.
Is there any way to circumvent this, because we want to implement authentication
on our own?
I already know two workarounds:
The best would of course be to implement a custom security realm for our own
authentication system. This is not an option, implementing an own security
realm is overkill for this specific web service.
The other way would be to route the requests by way of a custom servlet, which
would
remove the basic authentication header, and put the authentication info in custom
headers, such as x-auth: <user:password>, or smthng similar, and after successful
authentication, make a call to bea's servlet weblogic.webservice.server.servlet.WebServiceServlet.
But still, I'd like to know if there is any way to tell bea's servlet to ignore
the basic
authentication header?
Oh yeah, by the way, this is URGENT, as always. (really!! ;)
Toni NykanenCurrently there is no option to turn off security check.
I think you can use a servlet filter mapped to the URL
of your service, instead of a proxy servlet?
Regards,
-manoj
http://manojc.com
"Toni Nykanen" <[email protected]> wrote in message
news:3ef1577b$[email protected]..
>
Hi!
We need to implement authentication using our own methods, and theauthentication
information is provided to the web service implementation in a basicauthentication
header. The problem is, that the servlet
weblogic.webservice.server.servlet.WebServiceServlet, which handles webservices
in
wls 7.0.sp2, always attempts to perform authentication, if the header ispresent.
Is there any way to circumvent this, because we want to implementauthentication
on our own?
I already know two workarounds:
The best would of course be to implement a custom security realm for ourown
authentication system. This is not an option, implementing an own security
realm is overkill for this specific web service.
The other way would be to route the requests by way of a custom servlet,which
would
remove the basic authentication header, and put the authentication info incustom
headers, such as x-auth: <user:password>, or smthng similar, and aftersuccessful
authentication, make a call to bea's servletweblogic.webservice.server.servlet.WebServiceServlet.
>
But still, I'd like to know if there is any way to tell bea's servlet toignore
the basic
authentication header?
Oh yeah, by the way, this is URGENT, as always. (really!! ;)
Toni Nykanen -
WLS 6.1 SP2 and Apache 1.3.26 Windows NT/2000
Hi,
Is there an Apache plugin available for WLS 6.1 (SP2) and Apache 1.3.26 running
on Windows NT/2000?
thanksI've solved my own problem. I learned that there was a sp4 (let alone a
sp3) for WLS. Installed that and the problem went away. Sorry for the
noise.
-Phil
Philip Bower <[email protected]> wrote in
news:[email protected]:
When I try to deploy the struts-example.war or if I add the struts.jar
to any other web app I've created, I get this error when I start WLS
and it tries to deploy that war.
java.lang.StringIndexOutOfBoundsException
at weblogic.servlet.internal.WebAppHelper.resolveManifestName
(WebAppHelper.java:469)
I'm using version 1.1b3 of struts. I'm having no problems with
version 1.0.2 of struts.
I'm guessing its complaining about the manifest file in struts.jar,
but I don't understand why.
Here's my version info and the stack trace (my web app is called
findme in this example). Thanks in advance.
-Phil
Server BuildWebLogic Server 6.1 SP2 12/18/2001 11:13:46 #154529
All Server Product VersionsWebLogic Server 6.1 SP2 12/18/2001
11:13:46 #154529 WebLogic XML Module 6.1 SP2 12/18/2001 11:28:02
#154529
<Feb 11, 2003 7:45:25 AM EST> <Error> <J2EE> <Error deploying
application findme: Could not load findme>
<Feb 11, 2003 7:45:25 AM EST> <Error> <Management> <ApplicationManager
starting Config caught throwable
java.lang.reflect.UndeclaredThrowableException:
java.lang.StringIndexOutOfBoundsException: String index out of range:
-1
at java.lang.String.substring(String.java:1525)
at
weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper
.jav a:469)
at
weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.j
ava: 234)
at
weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebApp
Serv letContext.java:3407)
at
weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServlet
Cont ext.java:3376)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContex
t.ja va:862) -
Hi All.
we have migrated to WLS 6.1 SP2, now we have a serious problem with the cluster
wihch die after several minutes. Our architecture is several front-ends servers
(concretely servelts, without cluster) make request to back-end (starteles EJB,
DB access). This back-end is compuond by four WLS instances running into 2 Sun
Solaris Machines. The system reports the nexts messages in the weblogic.log.
* backendPlatformA instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformA|129.1027407260379', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:02:24 AM GMT> <Info> <DGCserver> <wls00>
<platformA> <ExecuteThread: '117' for queue: 'default'> <system> <>
<000000> <Tried to renew lease on lost reference: '257'>
* backendPlatformB instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformB|118.1027407423933', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:03:52 AM GMT> <Info> <WebLogicServer> <wls00>
<platformB> <ExecuteThread: '114' for queue: 'default'> <> <> <000274>
<Removing "ClientContext - id: '#|platformB|119.1027407423933', bound:
'false', dead: 'false'" because of soft disconnect timeout.>
* ioboxPlatfromC instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformC|139.1027407286958', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:04:24 AM GMT> <Info> <DGCserver> <wls01>
<platformC> <ExecuteThread: '119' for queue: 'default'> <system> <>
<000000> <Tried to renew lease on lost reference: '257'>
* Instancia ioboxPlatfromD
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformD|58.1027415900956', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:05:54 AM GMT> <Info> <WebLogicServer> <wls01>
<platformD> <ExecuteThread: '107' for queue: 'default'> <> <> <000274>
<Removing "ClientContext - id: '#|platformD|59.1027415900956', bound:
'false', dead: 'false'" because of soft disconnect timeout.>
####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
<ExecuteThread: '107' for queue: 'default'> <> <> <000113> <Removing
platformA
jvmid:7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
from cluster view due to PeerGone>
####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
<ExecuteThread: '116' for queue: 'default'> <> <> <000129> <Removing
7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
to the cluster>
####<Jul 23, 2002 10:06:22 AM GMT> <Error> <T3Services> <wls01>
<platformD> <ExecuteThread: '102' fo
r queue: 'default'> <> <5577:04d703f24ce814ba> <000000> < Parametros
anaydidos>
####<Jul 23, 2002 10:06:33 AM GMT> <Error> <ConnectionManager> <wls01>
<platformD> <ExecuteThread: '119' for queue: 'default'> <system> <>
<000000> <Closing: 'weblogic.rjvm.t3.T3JVMConnection@63718b' because of:
'Server received a message over an uninitialized connection: 'JVMMessage
from: 'null' to:
'1615014391094985181S:10.2.1.4:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformD'
cmd: 'CMD_REQUEST', QOS: '101', responseId: '1', invokableId: '454',
flags: 'JVMIDs Not Sent, TX Context Not Sent', abbrev offset: '38'''
Any idea?
Thanks for all
Hi,
We are using Weblogic 6.1 SP2, NT 4.0 and java 1.3.1. We have also encountered
the same error message. We have 1 admin and 2 managed servers. We have tried connecting
in using weblogic.admin to check the idle thread and we are able to connect. However,
when we connect from IIS to Weblogic, the application failed to response. We have
tried connect direct to weblogic but it does not response as well. We have seen
that the idle thread left has been reduced but there is no activites from the
weblogic console. The thread is used but not releasing and the console is not
moving. When we shutdown one of the managed server, the application is able to
process as seen from the console.
We have turned off native io and this behavior is not seen. When we turn on native
io, it appear. So we can conclude that it is related to native io.
Is there any solution or intermediate patch without upgrading to the later SP
Thanks
Rajesh Mirchandani <[email protected]> wrote:
>We are shipping the Jdriver for oracle 816 with SP3. Use the driver
>from .\bin\oci816_8
>
>Manuel wrote:
>
>> Thanks Rajesh,
>>
>> we have another problem since our database is Oracle 8.1.6 and SP3
>jDriver doesn´t
>> support this version.
>>
>> Best Regards
>>
>> Rajesh Mirchandani <[email protected]> wrote:
>> >Upgrade to SP3, if possible.
>> >
>> >Manuel wrote:
>> >
>> >> Hi All.
>> >>
>> >> we have migrated to WLS 6.1 SP2, now we have a serious problem with
>> >the cluster
>> >> wihch die after several minutes. Our architecture is several front-ends
>> >servers
>> >> (concretely servelts, without cluster) make request to back-end
>(starteles
>> >EJB,
>> >> DB access). This back-end is compuond by four WLS instances running
>> >into 2 Sun
>> >> Solaris Machines. The system reports the nexts messages in the weblogic.log.
>> >>
>> >> * backendPlatformA instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformA|129.1027407260379', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:02:24 AM GMT> <Info> <DGCserver> <wls00>
>> >> <platformA> <ExecuteThread: '117' for queue: 'default'> <system>
><>
>> >> <000000> <Tried to renew lease on lost reference: '257'>
>> >>
>> >> * backendPlatformB instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformB|118.1027407423933', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:03:52 AM GMT> <Info> <WebLogicServer> <wls00>
>> >> <platformB> <ExecuteThread: '114' for queue: 'default'> <> <> <000274>
>> >> <Removing "ClientContext - id: '#|platformB|119.1027407423933',
>bound:
>> >> 'false', dead: 'false'" because of soft disconnect timeout.>
>> >>
>> >> * ioboxPlatfromC instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformC|139.1027407286958', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:04:24 AM GMT> <Info> <DGCserver> <wls01>
>> >> <platformC> <ExecuteThread: '119' for queue: 'default'> <system>
><>
>> >> <000000> <Tried to renew lease on lost reference: '257'>
>> >>
>> >> * Instancia ioboxPlatfromD
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformD|58.1027415900956', bound: 'false', dead: 'false'" because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:05:54 AM GMT> <Info> <WebLogicServer> <wls01>
>> >> <platformD> <ExecuteThread: '107' for queue: 'default'> <> <> <000274>
>> >> <Removing "ClientContext - id: '#|platformD|59.1027415900956', bound:
>> >> 'false', dead: 'false'" because of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
>> >> <ExecuteThread: '107' for queue: 'default'> <> <> <000113> <Removing
>> >> platformA
>> >> jvmid:7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
>> >> from cluster view due to PeerGone>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
>> >> <ExecuteThread: '116' for queue: 'default'> <> <> <000129> <Removing
>> >> 7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
>> >> to the cluster>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Error> <T3Services> <wls01>
>> >> <platformD> <ExecuteThread: '102' fo
>> >> r queue: 'default'> <> <5577:04d703f24ce814ba> <000000> < Parametros
>> >> anaydidos>
>> >> ####<Jul 23, 2002 10:06:33 AM GMT> <Error> <ConnectionManager> <wls01>
>> >> <platformD> <ExecuteThread: '119' for queue: 'default'> <system>
><>
>> >> <000000> <Closing: 'weblogic.rjvm.t3.T3JVMConnection@63718b' because
>> >of:
>> >> 'Server received a message over an uninitialized connection: 'JVMMessage
>> >> Wrom: HJEXXIMQZU
>> >> '1615014391094985181S:10.2.1.4:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformD'
>> >> cmd: 'CMD_REQUEST', QOS: '101', responseId: '1', invokableId: '454',
>> >> flags: 'JVMIDs Not Sent, TX Context Not Sent', abbrev offset: '38'''
>> >>
>> >> Any idea?
>> >>
>> >> Thanks for all
>> >
>> >--
>> >Rajesh Mirchandani
>> >Developer Relations Engineer
>> >BEA Support
>> >
>> >
>
>--
>Rajesh Mirchandani
>Developer Relations Engineer
>BEA Support
>
>
Maybe you are looking for
-
Report to show major Internet Explorer version
There's many posts relating to an accurate way of reporting on which version of Internet Explorer is being used by a PC. It is not made easy by the fact that some versions are recorded in Add/Remove programs, while other versions aren't, and there se
-
External Hard Drive "partial" crash?
Ive been using a 500 gb GDrive mini triple for about 6 months now to store all of my data for school and it has been great, until now. I dont kow exactly what happened, but now "most" of my files are corrupt (the important ones conveniently). I had p
-
HTTP Response :500 unable to connect to remote system.
Hi, I am doing proxy-xi-file scenario, where i am getting this error in sxmb_moni in R/3. The error reads with red flag: HTTP Response :500 unable to connect to remote system. Please tell me what can be the reason.
-
When I try to create an e-print account, it says my e-mail is already registered, but it is not!
The system returns an answer that my email is already registered, then if I try to get a password reset, it replies "use the e-mail associated with your account"...so I'm locked out This question was solved. View Solution.
-
Managing Smart Cards (alladin + crypto provider)
hi Does anyone know how to get work cards Aladdin, with crypto provider (CryptoPro (http://www.cryptopro.ru/) or signal-com (http://signal-com.ru/)) in windows 2003r2 or 2008r2?