WLS 7.0 sp2 for HP/UX?
Why is sp2 missing för HP/UX? Is this no longer a supported platform?
//Björn
It is definitely supported. You just might see files for Windows and Others
instead of each platform. Where are you looking?
Oh, I see what you mean from the platform selector.
Consider trying the Smart Update method instead.
It is described in the Installation Guide.
Wayne Scott
Björn Caroll wrote:
Why is sp2 missing för HP/UX? Is this no longer a supported platform?
//Björn
Similar Messages
-
IIS Plug for WLS 6.1 SP2: The specified procedure could not be found.
I get an the following error message "The specified procedure could not be
found." in my browser when trying to use the IIS-proxy plugin on WLS 6.1 sp2
Windows 2000
Has anyone else encountered this message? Any solutions?
Regards,
Jonas KlemmingThank you for posting your answer, and then solution! :> I was fighting
with my IIS/WLS installation last night when I was about to give up, I came
across your posting. Although I'm playing with 7, I thought I would try
reading your posting anyways, and thankfully I did. What I saw, reminded me
to look at the steps one more time and I found I wasn't forwarding the
.wlforward piece on! So thank you veyr much! :>>>>
"Jonas Klemming" <[email protected]> wrote in message
news:[email protected]..
Fixed it.
I had mapped .wlforward to iisforward.dll instead of iisproxy.dll
/Jonas
"Jonas Klemming" <[email protected]> wrote in message
news:[email protected]..
I get an the following error message "The specified procedure could not
be
found." in my browser when trying to use the IIS-proxy plugin on WLS 6.1sp2
Windows 2000
Has anyone else encountered this message? Any solutions?
Regards,
Jonas Klemming -
XMLSPY Special Edition for BEA WebLogic 8.1 and WLS 8.1 sp2
Hi,
I'm a newbie for WebLogic Server. I started with WLS 8.1 sp2 since I got the book "J2EE Applications and BEA WebLogic Server 2nd Edition" which was written for WLS 8.1.
While XMLSPY Special Edition for BEA WebLogic (version 5.4 something, built in 2003) is indeed packaged with WLS 8.1 sp2 and can be installed, but it'll pop up a window (ALTOVA License Manager) everytime when I try to use it. This window pops up because the license key is not installed during the installation and therefore can't be used unless a valid key is provided.
I wonder whether I really need to get XMLSPY Special Edition for BEA WebLogic 8.1 working in order to use WLS 8.1 just for the purpose of learning. If so, can someone share with me the the key-code for XMLSPY Special Edition for BEA WebLogic 8.1 please?
BTW, I tried to find something useful to this question/problem at ALTOVA website, no luck at all.
Thank you very much.
JFHi Ravi,
Thanks very much for your very helpful reply.
I got into the problem with xmlspy while I was trying to figure out why the WLS admin console missing the left pane/sidebar. There was only one non-expandable dot sign at the lefttop in the admin console. When I right-click on that little dot icon, the pulldown menu shows one option is to use XMLSPY to check (something along that line). Also, I see the XMLSPY button at the left bottom of my W2003 windows (just next to IE button). So, either way when I invoked XMLSPY I would get that pop up window which tells me there choices: type in a key-code, request for a trial key, or buy a license key. But eventually, I figured out the way to fix my problem - installing a newer version of j2sdk code. However, I wasn't sure whether the xmlspy issue would a hidden problem further down the road for me to learn WLS 8.1.
You're absoluately right commenting on the the right version of WLS to use at the beginning of learning WLS.
I have been VMWare Workstation for several months. I've created a CentOS 5.4 VM with WLS 11g installed. I played with with WLS 11g for a while and even followed through an Oracle online tutorial for that version. But I'm just used to learn something with a hard copy of book and I happen to have this old book on WLS 8.1 which seems to be highly rated before. I may continue to go through this book quickly if I can. However, if I experience too many hard problems down the road, I won't waste too much more time on this path. My long term goal is of course to learn more and better about WLS 11g and other Oracle related framework and tools. There is too much to learn. But the good thing is that Oracle provides everything free to learn. Also, I'm very encouraged by the quality of the Oracle tech group where I can turn for very useful help.
Thanks again and best regards,
JF -
Hi!
We need to implement authentication using our own methods, and the authentication
information is provided to the web service implementation in a basic authentication
header. The problem is, that the servlet
weblogic.webservice.server.servlet.WebServiceServlet, which handles web services
in
wls 7.0.sp2, always attempts to perform authentication, if the header is present.
Is there any way to circumvent this, because we want to implement authentication
on our own?
I already know two workarounds:
The best would of course be to implement a custom security realm for our own
authentication system. This is not an option, implementing an own security
realm is overkill for this specific web service.
The other way would be to route the requests by way of a custom servlet, which
would
remove the basic authentication header, and put the authentication info in custom
headers, such as x-auth: <user:password>, or smthng similar, and after successful
authentication, make a call to bea's servlet weblogic.webservice.server.servlet.WebServiceServlet.
But still, I'd like to know if there is any way to tell bea's servlet to ignore
the basic
authentication header?
Oh yeah, by the way, this is URGENT, as always. (really!! ;)
Toni NykanenCurrently there is no option to turn off security check.
I think you can use a servlet filter mapped to the URL
of your service, instead of a proxy servlet?
Regards,
-manoj
http://manojc.com
"Toni Nykanen" <[email protected]> wrote in message
news:3ef1577b$[email protected]..
>
Hi!
We need to implement authentication using our own methods, and theauthentication
information is provided to the web service implementation in a basicauthentication
header. The problem is, that the servlet
weblogic.webservice.server.servlet.WebServiceServlet, which handles webservices
in
wls 7.0.sp2, always attempts to perform authentication, if the header ispresent.
Is there any way to circumvent this, because we want to implementauthentication
on our own?
I already know two workarounds:
The best would of course be to implement a custom security realm for ourown
authentication system. This is not an option, implementing an own security
realm is overkill for this specific web service.
The other way would be to route the requests by way of a custom servlet,which
would
remove the basic authentication header, and put the authentication info incustom
headers, such as x-auth: <user:password>, or smthng similar, and aftersuccessful
authentication, make a call to bea's servletweblogic.webservice.server.servlet.WebServiceServlet.
>
But still, I'd like to know if there is any way to tell bea's servlet toignore
the basic
authentication header?
Oh yeah, by the way, this is URGENT, as always. (really!! ;)
Toni Nykanen -
Problem starting wls 6.1 sp2
Hi
I have developed an appliaction using wls 6.1 sp2 on w2k, which I want to migrate
to Solaris 8.
I have modified my windows statup scripts to Solaris, but I get a strange error
when starting weblogic. I am starting the server as root and my weblogic.policy
file is modified according to my installation.
Has anybody encountered anything similar?
<Feb 20, 2002 12:08:09 PM CET> <Critical> <Management> <Unable to deploy an internal
management web application - <all-internal-apps>. Managed servers may be unable
to start.
java.io.FileNotFoundException: ./config/Certifikat/.wlstaging/wl_management_internal2.war
(No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at java.io.FileOutputStream.<init>(FileOutputStream.java:62)
at java.io.FileOutputStream.<init>(FileOutputStream.java:132)
at weblogic.management.mbeans.custom.ApplicationManager.stageGlobalWarFile(ApplicationManager.java:398)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:334)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:152)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy35.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:479)
at weblogic.management.Admin.startApplicationManager(Admin.java:1138)
at weblogic.management.Admin.finish(Admin.java:561)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:501)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:198)
at weblogic.Server.main(Server.java:35)
>
My startup script is as follows
bash-2.03$ more startWeblogic.sh
#!/usr/bin/bash
# Set user-defined variables.
export PROJECT=postdanmark
export ENVIRONMENT=test
export RELEASE_DIR=/opt/projects/$PROJECT/$ENVIRONMENT/lib
export JAVA_HOME=/opt/jdk/j2sdk1_3_1_02
export WEBLOGIC_HOME=/opt/bea/weblogic/6.1
export PATH=$WEBLOGIC_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:.:$PATH
export CLASSPATH=$RELEASE_DIR/internal/util/1.0/Util.jar
export CLASSPATH=$CLASSPATH:$WEBLOGIC_HOME/lib/weblogic.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/sun/jaxb/1.0ea/lib/jaxb-rt-1.0-ea.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/postdanmark/1.0/PostDanmarkPC.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/EntrustCAEjb/1.0/EntrustCAEjb.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/websupport/1.0/WebSupport.jar
export CLASSPATH=$CLASSPATH:/opt/projects/$PROJECT/$ENVIRONMENT/batch/properties
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/corba/interfaces/entrustca/1.2/EntrustCA.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/mysql/jdbc/2.0.4/mm.mysql-2.0.4-bin.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entbase.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entuser.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entp7.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entmisc.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entcertlist.jar
echo off
echo *********************************************
echo * Starting weblogic application server *
echo *********************************************
# Set WLS_PW equal to your system password for no password prompt server startup.
export WLS_PW=certifikat
# Set Production Mode. When set to true, the server starts up in production mode.
When set to false, the server starts up i
n development mode. The default is false.
export STARTMODE=false
export WEBLOGIC_OPTIONS='-Dweblogic.Domain=Certifikat'
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.Name=PostDanmarkServer"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.discover=false"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dbea.home=/opt/bea/weblogic/6.1"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.home=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.dir=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.password=$WLS_PW"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.ProductionModeEnabled=$STARTMODE"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.security.policy=$WEBLOGIC_HOME/lib/weblogic.policy"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.RootDirectory=/opt/projects/$PROJECT/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.util.logging.config.file=/opt/projects/$PROJECT/$ENVIRONMENT/batch/proper
ties/logging.properties"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.library.path=$WEBLOGIC_HOME/lib/solaris:$WEBLOGIC_HOME/lib/solaris/oci816
_8"
export JAVA_OPTIONS='-hotspot -ms64m -mx64m -classpath '
export JAVA_OPTIONS=${JAVA_OPTIONS}$CLASSPATH
echo on
echo "using JAVA OPTIONS : "$JAVA_OPTIONS"
echo "using WEBLOGIC OPTIONS : "$WEBLOGIC_OPTIONS"
"$JAVA_HOME/bin/java" $JAVA_OPTIONS $WEBLOGIC_OPTIONS weblogic.ServerHi.
Try placing the wl_management_internal2.war file from the mydomain/.wlstaging directory into the directory your server is expecting.
Regards,
Michael
Peter Buus wrote:
Hi
I have developed an appliaction using wls 6.1 sp2 on w2k, which I want to migrate
to Solaris 8.
I have modified my windows statup scripts to Solaris, but I get a strange error
when starting weblogic. I am starting the server as root and my weblogic.policy
file is modified according to my installation.
Has anybody encountered anything similar?
<Feb 20, 2002 12:08:09 PM CET> <Critical> <Management> <Unable to deploy an internal
management web application - <all-internal-apps>. Managed servers may be unable
to start.
java.io.FileNotFoundException: ./config/Certifikat/.wlstaging/wl_management_internal2.war
(No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at java.io.FileOutputStream.<init>(FileOutputStream.java:62)
at java.io.FileOutputStream.<init>(FileOutputStream.java:132)
at weblogic.management.mbeans.custom.ApplicationManager.stageGlobalWarFile(ApplicationManager.java:398)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:334)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:152)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy35.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:479)
at weblogic.management.Admin.startApplicationManager(Admin.java:1138)
at weblogic.management.Admin.finish(Admin.java:561)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:501)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:198)
at weblogic.Server.main(Server.java:35)
>
My startup script is as follows
bash-2.03$ more startWeblogic.sh
#!/usr/bin/bash
# Set user-defined variables.
export PROJECT=postdanmark
export ENVIRONMENT=test
export RELEASE_DIR=/opt/projects/$PROJECT/$ENVIRONMENT/lib
export JAVA_HOME=/opt/jdk/j2sdk1_3_1_02
export WEBLOGIC_HOME=/opt/bea/weblogic/6.1
export PATH=$WEBLOGIC_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:.:$PATH
export CLASSPATH=$RELEASE_DIR/internal/util/1.0/Util.jar
export CLASSPATH=$CLASSPATH:$WEBLOGIC_HOME/lib/weblogic.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/sun/jaxb/1.0ea/lib/jaxb-rt-1.0-ea.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/postdanmark/1.0/PostDanmarkPC.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/EntrustCAEjb/1.0/EntrustCAEjb.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/websupport/1.0/WebSupport.jar
export CLASSPATH=$CLASSPATH:/opt/projects/$PROJECT/$ENVIRONMENT/batch/properties
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/corba/interfaces/entrustca/1.2/EntrustCA.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/mysql/jdbc/2.0.4/mm.mysql-2.0.4-bin.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entbase.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entuser.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entp7.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entmisc.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entcertlist.jar
echo off
echo *********************************************
echo * Starting weblogic application server *
echo *********************************************
# Set WLS_PW equal to your system password for no password prompt server startup.
export WLS_PW=certifikat
# Set Production Mode. When set to true, the server starts up in production mode.
When set to false, the server starts up i
n development mode. The default is false.
export STARTMODE=false
export WEBLOGIC_OPTIONS='-Dweblogic.Domain=Certifikat'
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.Name=PostDanmarkServer"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.discover=false"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dbea.home=/opt/bea/weblogic/6.1"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.home=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.dir=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.password=$WLS_PW"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.ProductionModeEnabled=$STARTMODE"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.security.policy=$WEBLOGIC_HOME/lib/weblogic.policy"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.RootDirectory=/opt/projects/$PROJECT/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.util.logging.config.file=/opt/projects/$PROJECT/$ENVIRONMENT/batch/proper
ties/logging.properties"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.library.path=$WEBLOGIC_HOME/lib/solaris:$WEBLOGIC_HOME/lib/solaris/oci816
_8"
export JAVA_OPTIONS='-hotspot -ms64m -mx64m -classpath '
export JAVA_OPTIONS=${JAVA_OPTIONS}$CLASSPATH
echo on
echo "using JAVA OPTIONS : "$JAVA_OPTIONS"
echo "using WEBLOGIC OPTIONS : "$WEBLOGIC_OPTIONS"
"$JAVA_HOME/bin/java" $JAVA_OPTIONS $WEBLOGIC_OPTIONS weblogic.Server--
Michael Young
Developer Relations Engineer
BEA Support -
Wls 8.1 sp2: weblogic.jspc complains about struts-html tags
Hi,
I am trying to compile jsps with weblogic.jspc, which use struts' html tags. However,
the compilation fails with the following message:
[java] Translation of /views/viewPageBody.jsp failed: (line 3): Error in using
tag library uri='/tags/struts-html' prefix='html': The Tag class 'org.apache.struts.taglib.html.BaseTag'
has no setter method corresponding to TLD declared attribute 'server', (JSP 1.1
spec, 5.4.1)
I opened the BaseTag class from the struts jar and found the setter exists for
the attribute 'server' of html tld. So does the property 'server'. The property
'server' is a string and the parameter in the setter is a string. I read about
the jspc errors in wls 8.1 about the setter parameter being of different type
than the property. However, that is not the case here. I tried using both Sun's
and BEA's jdk. None of them help. Btw, there is another attribute mentioned in
the html tld, which is 'target'. The compiler doesn't complain yet about this.:(
Also, I happened to compile other apps which have struts logic tags.
My environment:
OS: Win2k sp3
WLS: 8.1 sp2
JDK: Sun's 1.4.2 sp4 / Bea's 1.4.1 sp5 (tried both)
Ant: 1.5.3 (I had an issue earlier with ant until I found that Bea officially
without any mention supports only ant 1.5.3.)
I would appreciate any help in this regard.
Thanks,
Abbas
What version of Struts are you trying to use?
Are you certain you're not encountering a different instance of that class in
an unexpected location in your classpath?
"Abbas" <[email protected]> wrote:
>
>Hi,
>I am trying to compile jsps with weblogic.jspc, which use struts' html
>tags. However,
>the compilation fails with the following message:
>
>[java] Translation of /views/viewPageBody.jsp failed: (line 3): Error
>in using
>tag library uri='/tags/struts-html' prefix='html': The Tag class 'org.apache.struts.taglib.html.BaseTag'
>has no setter method corresponding to TLD declared attribute 'server',
>(JSP 1.1
>spec, 5.4.1)
>
>I opened the BaseTag class from the struts jar and found the setter exists
>for
>the attribute 'server' of html tld. So does the property 'server'. The
>property
>'server' is a string and the parameter in the setter is a string. I read
>about
>the jspc errors in wls 8.1 about the setter parameter being of different
>type
>than the property. However, that is not the case here. I tried using
>both Sun's
>and BEA's jdk. None of them help. Btw, there is another attribute mentioned
>in
>the html tld, which is 'target'. The compiler doesn't complain yet about
>this.:(
>Also, I happened to compile other apps which have struts logic tags.
>
>
>My environment:
>OS: Win2k sp3
>WLS: 8.1 sp2
>JDK: Sun's 1.4.2 sp4 / Bea's 1.4.1 sp5 (tried both)
>Ant: 1.5.3 (I had an issue earlier with ant until I found that Bea officially
>without any mention supports only ant 1.5.3.)
>
>I would appreciate any help in this regard.
>
>Thanks,
>
>Abbas
-
WLS 7.0 sp2 - Servlet Problems with SOAP messages
I'm using Weblogic 7.0 SP2 and trying to create a Servlet to receive SOAP wrapped
XML messages. I'm getting the following error. Is this a problem with WLS7.0sp2's
support of JAXM? The System.out.println's indicate I have successfully received
the incoming SOAP request and then successfully formatted the SOAP response, but
upon returning saving the response it appears to blow up. Does anyone have any
suggestions?
I need to do the following in a servlet:
- receive an incoming SOAP request with an embedded XML message
- perform some processing
- return a SOAP response with an embedded XML message
Should I be using JAXM? Or can I do this same task easily with JAX-RPC?
<Feb 24, 2004 4:10:42 PM AST> <Error> <HTTP> <101017> <[ServletContext(id=260434
7,name=isd.war,context-path=)] Root cause of ServletException
java.lang.Error: NYI
at weblogic.webservice.core.soap.SOAPMessageImpl.saveRequired(SOAPMessag
eImpl.java:360)
at javax.xml.messaging.JAXMServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
I've stripped the code down so that all it does is verifies the incoming SOAP/XML
request and creates a hard-coded response... be gentle... I'm a novice at this
import javax.xml.soap.*;
import javax.servlet.*;
import javax.servlet.http.*;
// import javax.xml.transform.*;
import java.util.*;
import java.io.*;
public class RegisterServlet extends HttpServlet
static MessageFactory fac = null;
static
try
fac = MessageFactory.newInstance();
catch (Exception ex)
ex.printStackTrace();
public void init(ServletConfig servletConfig) throws ServletException
super.init(servletConfig);
public void doPost(HttpServletRequest req, HttpServletResponse resp) throws ServletException,
IOException
try
System.out.println("** Note: doPost() Entering req = " + req);
// Get all the headers from the HTTP request
MimeHeaders headers = getHeaders(req);
// Get the body of the HTTP request
InputStream is = req.getInputStream();
// Now internalize the contents of a HTTP request
// and create a SOAPMessage
SOAPMessage msg = fac.createMessage(headers, is);
System.out.println("** Note: doPost() Step A");
SOAPMessage reply = null;
reply = onMessage(msg);
System.out.println("** Note: doPost() Step B reply = " + reply);
if (reply != null)
* Need to call saveChanges because we're
* going to use the MimeHeaders to set HTTP
* response information. These MimeHeaders
* are generated as part of the save.
if (reply.saveRequired())
System.out.println("** Note: doPost() Step C reply.saveRequired()");
reply.saveChanges();
resp.setStatus(HttpServletResponse.SC_OK);
putHeaders(reply.getMimeHeaders(), resp);
// Write out the message on the response stream
OutputStream os = resp.getOutputStream();
System.out.println("** Note: doPost() Step D os = " + os);
reply.writeTo(os);
os.flush();
else
resp.setStatus(HttpServletResponse.SC_NO_CONTENT);
catch (Exception ex)
throw new ServletException("** Error: SAAJ POST failed: " + ex.getMessage());
static MimeHeaders getHeaders(HttpServletRequest req)
Enumeration enum = req.getHeaderNames();
MimeHeaders headers = new MimeHeaders();
while (enum.hasMoreElements())
String headerName = (String)enum.nextElement();
String headerValue = req.getHeader(headerName);
StringTokenizer values =
new StringTokenizer(headerValue, ",");
while (values.hasMoreTokens())
headers.addHeader(headerName,
values.nextToken().trim());
return headers;
static void putHeaders(MimeHeaders headers, HttpServletResponse res)
Iterator it = headers.getAllHeaders();
while (it.hasNext())
MimeHeader header = (MimeHeader)it.next();
String[] values = headers.getHeader(header.getName());
if (values.length == 1)
res.setHeader(header.getName(),
header.getValue());
else
StringBuffer concat = new StringBuffer();
int i = 0;
while (i < values.length)
if (i != 0)
concat.append(',');
concat.append(values[i++]);
res.setHeader(header.getName(), concat.toString());
// This is the application code for handling the message.
public SOAPMessage onMessage(SOAPMessage message)
SOAPMessage replymsg = null;
try
System.out.println("** Note: OnMessage() Entering msg = " + message);
//Extract the ComputerPart element from request message and add to reply SOAP
message.
SOAPEnvelope reqse = message.getSOAPPart().getEnvelope();
SOAPBody reqsb = reqse.getBody();
//System.out.println("** Note: OnMessage() Step B");
System.out.println("** Note: OnMessage () Step A Soap Request Message Body = "
+ reqsb);
//Create a reply mesage from the msgFactory of JAXMServlet
System.out.println("** Note: OnMessage () Step B");
replymsg = fac.createMessage();
SOAPPart sp = replymsg.getSOAPPart();
SOAPEnvelope se = sp.getEnvelope();
SOAPBody sb = se.getBody();
System.out.println("** Note: OnMessage () Step C Soap Reply Before Message Body
= " + sb);
se.getBody().addBodyElement(se.createName("RegisterResponse")).addChildElement(se.createName("ErrorCode")).addTextNode("000");
System.out.println("** Note: OnMessage () Step D Soap Reply After Message Body
= " + sb);
replymsg.saveChanges();
System.out.println("** Note: OnMessage() Exiting replymsg = " + (replymsg));
catch (Exception ex)
ex.printStackTrace();
return replymsg;
Michael,
I got the same error on WLS8.1/Win2K professional and apache FOP (old version).
After digging into the WLS code and FOP(old version). i found the conflict happens
on
the "org.xml.sax.parser" system property. In WLS code, they hard coded like the
following when startup weblogic server:
System.setProperty("org.xml.sax.parser", "weblogic.xml.jaxp.RegistryParser");
But the FOP code try to use the "org.xml.sax.parser" system property to find the
sax parser then conlict happens.
Here is the response from BEA support :
"I consulted with our developers regarding the question of whether we can change
the hard-coded value for the java system property: org.xml.sax.parser by using
a configuration parameter and I found that unfortunately there is no specific
setting to change the value. As you had mentioned in your note the org.xml.sax.parser
system property can be changed programmatically in your application code."
I solve my problem by using newer apache FOP (it never use the system property:org.xml.sax.parser
any more) and XML Registy for WLS8.1.
Good luck.
David Liu
Point2 Technologies Inc.
"p_michael" <[email protected]> wrote:
>
Help.
When we migrated from WLS 6.1 to WLS 7.0 SP2 when encountered a problem
with XML
parsing that did not previously exist.
We get the error "weblogic.xml.jaxp.RegistryParser is not a SAX driver".
What does this mean? And, what should we do about it.
p_michael -
Difference between WLS 6.1 SP2 and SP3
I have recently tested my application in WLS 6.1 SP3 (who work normally in WLS
6.1 SP2) , I have problem with my jsp page for merging a jsp in another
What need I do to correct it ?Steven,
The CGIServlet for WebLogic will not run a CGI that doesn't have an extension.
Just add and extension to your executable and it should run fine.
jeff
"Steven" <[email protected]> wrote:
Hi all,
I am currently facing a problem with CGI binaries via CGIServlet on WLS
6.1
sp4. The web.xml file has been configured correctly as follows:
-------- start of web.xml -----------
<servlet>
<servlet-name>CGIServlet</servlet-name>
<servlet-class>weblogic.servlet.CGIServlet</servlet-class>
<init-param>
<param-name>cgiDir</param-name>
<param-value>/web/bea6.1sp2/wlserver6.1/config/ngwapp/applications/NGWWebApp
/cgi-bin</param-value>
</init-param>
<init-param>
<param-name>*.pl</param-name>
<param-value>/web/perl5/bin/perl5.00405</param-value>
</init-param>
<init-param>
<param-name>*.cgi</param-name>
<param-value>/web/perl5/bin/perl5.00405</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>CGIServlet</servlet-name>
<url-pattern>/cgi-bin/*</url-pattern>
</servlet-mapping>-------- end of web.xml ---------
When a call is made to http://.../cgi-bin/dialogserver , this results
in a
404-File Not Found error.
The contents of the cgi-bin directory have not been altered and I did
not
face this problem earlier when I was using sp2.
It only happened after I upgraded to sp4. Can anyone help?
best rgds,
steven. -
WLS 6.1 SP2 NSAPI and iPlanet (Sun One) issues
Hi. I am going nuts with this NSAPI issue. I am working in a Solaris 8 environment,
WLS 6.1 SP2 and iPlanet (Sun One)and NSAPI. I can get everything to work fine
and dandy in aniPlanet 4.1 environment. I can not get it to work in an Iplanet
(Sun One) 6.x environment. It appears that some things work differently between
the versions of iPlanet (ie. things contained in magnus.conf and/or obj.conf).
I have tried moving things, removing things, adding things and nothing seems
to work....it's almost as though the NSAPI, etc. are being ignored.
I've attached my magnus.conf and obj.conf files (I cut and pasted them into a
single file so I could upload it). Can anyone help me out here...I've been working
for weeks on this and can't seem to get any answers.
Thanks!
Doug
P.S. For security purpses I changed the first part of the IP add. in the files
to 1234567, etc.
Thanks
[conf_files.txt]Hi Doug
U have to put the following section
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib="./libproxy.so"
Init fn="wl_init"
into magus.conf
and put the rest into obj.conf
Best Regards
Alex
"Doug E" <[email protected]> wrote:
>
Does anybody know of a good reference document on how to properly install
the NSAPI
plug-in for WLS6.1 & iPlanet6(SunOne) on Unix (Solaris). Many of the references
that
I have been finding are either incomplete, have typo's and are mostly Windows
oriented
(ie. with the .dll's, paths, examples, etc.)
My problem is that our old iPlanet 4.x works fine...everything proxies,
etc. iPlanet
6 just doesn't want to seem to communicate with WLS 6.1 SP2 We tried many
of the
saem things from the 4.x magnus & obj.confs...but things look somewhat different
in iPlanet 6.x (did they move tings..such as the fn's from one to the other,
etc.)
If so..and there are big differences in installing iPlanet 4.x vs. 6.x
then many
of the docs out there are inaccurate. Does anyone know if there is a newer
version
of the NSAPI plug-in for Unix.
I would love to see a basic, working set of magnus.conf obj.conf, MIME,etc
from someone
who has actually gotten NSAPI to work between WLS 6.1 and iPlanet 6 on Unix
(Solaris)
It blows my mind that 4.x works and 6.x doesn't. An updated NSAPI plug-in
, if it exists and perhaps fixes the problem, would make my day. Any ideas?
Thanks!
-Doug -
WLS 6.1 SP2, iPlanet 6 & NSAPI problems
Does anybody know of a good reference document on how to properly install the NSAPI
plug-in for WLS6.1 & iPlanet6(SunOne) on Unix (Solaris). Many of the references that
I have been finding are either incomplete, have typo's and are mostly Windows oriented
(ie. with the .dll's, paths, examples, etc.)
My problem is that our old iPlanet 4.x works fine...everything proxies, etc. iPlanet
6 just doesn't want to seem to communicate with WLS 6.1 SP2 We tried many of the
saem things from the 4.x magnus & obj.confs...but things look somewhat different
in iPlanet 6.x (did they move tings..such as the fn's from one to the other, etc.)
If so..and there are big differences in installing iPlanet 4.x vs. 6.x then many
of the docs out there are inaccurate. Does anyone know if there is a newer version
of the NSAPI plug-in for Unix.
I would love to see a basic, working set of magnus.conf obj.conf, MIME,etc from someone
who has actually gotten NSAPI to work between WLS 6.1 and iPlanet 6 on Unix (Solaris)
It blows my mind that 4.x works and 6.x doesn't. An updated NSAPI plug-in
, if it exists and perhaps fixes the problem, would make my day. Any ideas? Thanks!
-DougHi Doug
U have to put the following section
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib="./libproxy.so"
Init fn="wl_init"
into magus.conf
and put the rest into obj.conf
Best Regards
Alex
"Doug E" <[email protected]> wrote:
>
Does anybody know of a good reference document on how to properly install
the NSAPI
plug-in for WLS6.1 & iPlanet6(SunOne) on Unix (Solaris). Many of the references
that
I have been finding are either incomplete, have typo's and are mostly Windows
oriented
(ie. with the .dll's, paths, examples, etc.)
My problem is that our old iPlanet 4.x works fine...everything proxies,
etc. iPlanet
6 just doesn't want to seem to communicate with WLS 6.1 SP2 We tried many
of the
saem things from the 4.x magnus & obj.confs...but things look somewhat different
in iPlanet 6.x (did they move tings..such as the fn's from one to the other,
etc.)
If so..and there are big differences in installing iPlanet 4.x vs. 6.x
then many
of the docs out there are inaccurate. Does anyone know if there is a newer
version
of the NSAPI plug-in for Unix.
I would love to see a basic, working set of magnus.conf obj.conf, MIME,etc
from someone
who has actually gotten NSAPI to work between WLS 6.1 and iPlanet 6 on Unix
(Solaris)
It blows my mind that 4.x works and 6.x doesn't. An updated NSAPI plug-in
, if it exists and perhaps fixes the problem, would make my day. Any ideas?
Thanks!
-Doug -
WLS 6.1 SP2 and Apache 1.3.26 Windows NT/2000
Hi,
Is there an Apache plugin available for WLS 6.1 (SP2) and Apache 1.3.26 running
on Windows NT/2000?
thanksI've solved my own problem. I learned that there was a sp4 (let alone a
sp3) for WLS. Installed that and the problem went away. Sorry for the
noise.
-Phil
Philip Bower <[email protected]> wrote in
news:[email protected]:
When I try to deploy the struts-example.war or if I add the struts.jar
to any other web app I've created, I get this error when I start WLS
and it tries to deploy that war.
java.lang.StringIndexOutOfBoundsException
at weblogic.servlet.internal.WebAppHelper.resolveManifestName
(WebAppHelper.java:469)
I'm using version 1.1b3 of struts. I'm having no problems with
version 1.0.2 of struts.
I'm guessing its complaining about the manifest file in struts.jar,
but I don't understand why.
Here's my version info and the stack trace (my web app is called
findme in this example). Thanks in advance.
-Phil
Server BuildWebLogic Server 6.1 SP2 12/18/2001 11:13:46 #154529
All Server Product VersionsWebLogic Server 6.1 SP2 12/18/2001
11:13:46 #154529 WebLogic XML Module 6.1 SP2 12/18/2001 11:28:02
#154529
<Feb 11, 2003 7:45:25 AM EST> <Error> <J2EE> <Error deploying
application findme: Could not load findme>
<Feb 11, 2003 7:45:25 AM EST> <Error> <Management> <ApplicationManager
starting Config caught throwable
java.lang.reflect.UndeclaredThrowableException:
java.lang.StringIndexOutOfBoundsException: String index out of range:
-1
at java.lang.String.substring(String.java:1525)
at
weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper
.jav a:469)
at
weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.j
ava: 234)
at
weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebApp
Serv letContext.java:3407)
at
weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServlet
Cont ext.java:3376)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContex
t.ja va:862) -
WLS 6.1 SP2 Cluster fails
Hi All.
we have migrated to WLS 6.1 SP2, now we have a serious problem with the cluster
wihch die after several minutes. Our architecture is several front-ends servers
(concretely servelts, without cluster) make request to back-end (starteles EJB,
DB access). This back-end is compuond by four WLS instances running into 2 Sun
Solaris Machines. The system reports the nexts messages in the weblogic.log.
* backendPlatformA instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformA|129.1027407260379', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:02:24 AM GMT> <Info> <DGCserver> <wls00>
<platformA> <ExecuteThread: '117' for queue: 'default'> <system> <>
<000000> <Tried to renew lease on lost reference: '257'>
* backendPlatformB instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformB|118.1027407423933', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:03:52 AM GMT> <Info> <WebLogicServer> <wls00>
<platformB> <ExecuteThread: '114' for queue: 'default'> <> <> <000274>
<Removing "ClientContext - id: '#|platformB|119.1027407423933', bound:
'false', dead: 'false'" because of soft disconnect timeout.>
* ioboxPlatfromC instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformC|139.1027407286958', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:04:24 AM GMT> <Info> <DGCserver> <wls01>
<platformC> <ExecuteThread: '119' for queue: 'default'> <system> <>
<000000> <Tried to renew lease on lost reference: '257'>
* Instancia ioboxPlatfromD
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformD|58.1027415900956', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:05:54 AM GMT> <Info> <WebLogicServer> <wls01>
<platformD> <ExecuteThread: '107' for queue: 'default'> <> <> <000274>
<Removing "ClientContext - id: '#|platformD|59.1027415900956', bound:
'false', dead: 'false'" because of soft disconnect timeout.>
####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
<ExecuteThread: '107' for queue: 'default'> <> <> <000113> <Removing
platformA
jvmid:7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
from cluster view due to PeerGone>
####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
<ExecuteThread: '116' for queue: 'default'> <> <> <000129> <Removing
7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
to the cluster>
####<Jul 23, 2002 10:06:22 AM GMT> <Error> <T3Services> <wls01>
<platformD> <ExecuteThread: '102' fo
r queue: 'default'> <> <5577:04d703f24ce814ba> <000000> < Parametros
anaydidos>
####<Jul 23, 2002 10:06:33 AM GMT> <Error> <ConnectionManager> <wls01>
<platformD> <ExecuteThread: '119' for queue: 'default'> <system> <>
<000000> <Closing: 'weblogic.rjvm.t3.T3JVMConnection@63718b' because of:
'Server received a message over an uninitialized connection: 'JVMMessage
from: 'null' to:
'1615014391094985181S:10.2.1.4:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformD'
cmd: 'CMD_REQUEST', QOS: '101', responseId: '1', invokableId: '454',
flags: 'JVMIDs Not Sent, TX Context Not Sent', abbrev offset: '38'''
Any idea?
Thanks for all
Hi,
We are using Weblogic 6.1 SP2, NT 4.0 and java 1.3.1. We have also encountered
the same error message. We have 1 admin and 2 managed servers. We have tried connecting
in using weblogic.admin to check the idle thread and we are able to connect. However,
when we connect from IIS to Weblogic, the application failed to response. We have
tried connect direct to weblogic but it does not response as well. We have seen
that the idle thread left has been reduced but there is no activites from the
weblogic console. The thread is used but not releasing and the console is not
moving. When we shutdown one of the managed server, the application is able to
process as seen from the console.
We have turned off native io and this behavior is not seen. When we turn on native
io, it appear. So we can conclude that it is related to native io.
Is there any solution or intermediate patch without upgrading to the later SP
Thanks
Rajesh Mirchandani <[email protected]> wrote:
>We are shipping the Jdriver for oracle 816 with SP3. Use the driver
>from .\bin\oci816_8
>
>Manuel wrote:
>
>> Thanks Rajesh,
>>
>> we have another problem since our database is Oracle 8.1.6 and SP3
>jDriver doesn´t
>> support this version.
>>
>> Best Regards
>>
>> Rajesh Mirchandani <[email protected]> wrote:
>> >Upgrade to SP3, if possible.
>> >
>> >Manuel wrote:
>> >
>> >> Hi All.
>> >>
>> >> we have migrated to WLS 6.1 SP2, now we have a serious problem with
>> >the cluster
>> >> wihch die after several minutes. Our architecture is several front-ends
>> >servers
>> >> (concretely servelts, without cluster) make request to back-end
>(starteles
>> >EJB,
>> >> DB access). This back-end is compuond by four WLS instances running
>> >into 2 Sun
>> >> Solaris Machines. The system reports the nexts messages in the weblogic.log.
>> >>
>> >> * backendPlatformA instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformA|129.1027407260379', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:02:24 AM GMT> <Info> <DGCserver> <wls00>
>> >> <platformA> <ExecuteThread: '117' for queue: 'default'> <system>
><>
>> >> <000000> <Tried to renew lease on lost reference: '257'>
>> >>
>> >> * backendPlatformB instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformB|118.1027407423933', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:03:52 AM GMT> <Info> <WebLogicServer> <wls00>
>> >> <platformB> <ExecuteThread: '114' for queue: 'default'> <> <> <000274>
>> >> <Removing "ClientContext - id: '#|platformB|119.1027407423933',
>bound:
>> >> 'false', dead: 'false'" because of soft disconnect timeout.>
>> >>
>> >> * ioboxPlatfromC instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformC|139.1027407286958', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:04:24 AM GMT> <Info> <DGCserver> <wls01>
>> >> <platformC> <ExecuteThread: '119' for queue: 'default'> <system>
><>
>> >> <000000> <Tried to renew lease on lost reference: '257'>
>> >>
>> >> * Instancia ioboxPlatfromD
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformD|58.1027415900956', bound: 'false', dead: 'false'" because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:05:54 AM GMT> <Info> <WebLogicServer> <wls01>
>> >> <platformD> <ExecuteThread: '107' for queue: 'default'> <> <> <000274>
>> >> <Removing "ClientContext - id: '#|platformD|59.1027415900956', bound:
>> >> 'false', dead: 'false'" because of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
>> >> <ExecuteThread: '107' for queue: 'default'> <> <> <000113> <Removing
>> >> platformA
>> >> jvmid:7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
>> >> from cluster view due to PeerGone>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
>> >> <ExecuteThread: '116' for queue: 'default'> <> <> <000129> <Removing
>> >> 7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
>> >> to the cluster>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Error> <T3Services> <wls01>
>> >> <platformD> <ExecuteThread: '102' fo
>> >> r queue: 'default'> <> <5577:04d703f24ce814ba> <000000> < Parametros
>> >> anaydidos>
>> >> ####<Jul 23, 2002 10:06:33 AM GMT> <Error> <ConnectionManager> <wls01>
>> >> <platformD> <ExecuteThread: '119' for queue: 'default'> <system>
><>
>> >> <000000> <Closing: 'weblogic.rjvm.t3.T3JVMConnection@63718b' because
>> >of:
>> >> 'Server received a message over an uninitialized connection: 'JVMMessage
>> >> Wrom: HJEXXIMQZU
>> >> '1615014391094985181S:10.2.1.4:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformD'
>> >> cmd: 'CMD_REQUEST', QOS: '101', responseId: '1', invokableId: '454',
>> >> flags: 'JVMIDs Not Sent, TX Context Not Sent', abbrev offset: '38'''
>> >>
>> >> Any idea?
>> >>
>> >> Thanks for all
>> >
>> >--
>> >Rajesh Mirchandani
>> >Developer Relations Engineer
>> >BEA Support
>> >
>> >
>
>--
>Rajesh Mirchandani
>Developer Relations Engineer
>BEA Support
>
>
-
WLS 6.1 SP2 and JDK 1.4.0
In configuring our WLS 6.1 SP2 to run on the released JDK 1.4 and starting the
server, most things seemed to start fine except for our ObjectIDFactorySession
EJB. It cacked when it tried to create a bean in the free pool. Stack trace
below. I know this is not supported, but can anyone shed some light?
####<Feb 15, 2002 3:05:03 PM EST> <Warning> <EJB> <023app11> <port7011server>
<main> <system> <> <010063> <The EJB: ObjectIDFactorySession had an <initial-beans-in-free-pool>
setting in its weblogic-ejb-jar.xml. An error occurred while creating these initial
bean instances. The error was:
nulljava.lang.ExceptionInInitializerError
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:296)
at java.lang.Class.newInstance(Class.java:249)
at javax.rmi.CORBA.Util.createDelegateIfSpecified(Util.java:339)
at javax.rmi.CORBA.Util.<clinit>(Util.java:51)
at javax.rmi.PortableRemoteObject.createDelegateIfSpecified(PortableRemoteObject.java:179)
at javax.rmi.PortableRemoteObject.<clinit>(PortableRemoteObject.java:58)
at prototype.com.guardian.util.HomeFactory.createHome(HomeFactory.java:81)
at prototype.com.guardian.util.HomeFactory.newHome(HomeFactory.java:49)
at prototype.com.guardian.util.HomeFactory.newSession(HomeFactory.java:95)
at prototype.com.guardian.fw.ObjectIDFactorySessionBean.ejbCreate(ObjectIDFactorySessionBean.java:31)
at prototype.com.guardian.fw.ObjectIDFactorySessionBean_r4ogoq_Impl.ejbCreate(ObjectIDFactorySessionBean_r4ogoq_Impl.java:112)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:153)
at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:198)
at weblogic.ejb20.pool.Pool.onAfterDeploy(Pool.java:177)
at weblogic.ejb20.deployer.Deployer.runAfterDeploymentListeners(Deployer.java:1325)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:1013)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:491)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:361)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:984)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:971)
at weblogic.management.internal.DynamicMBeanImpl.add(DynamicMBeanImpl.java:956)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:648)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy65.addTarget(Unknown Source)
at weblogic.management.mbeans.custom.ApplicationManager.autoDeploy(ApplicationManager.java:867)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:966)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:886)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:802)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
at weblogic.management.mbeans.custom.ApplicationManager.startAdminManager(ApplicationManager.java:278)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:152)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy5.start(Unknown Source)
at weblogic.management.Admin.startApplicationManager(Admin.java:1184)
at weblogic.management.Admin.finish(Admin.java:590)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:518)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
Caused by: java.lang.RuntimeException: could not find or instantiate any UtilDelegate
class
at weblogic.iiop.UtilDelegateImpl.<clinit>(UtilDelegateImpl.java:73)
... 77 more
>I've solved my own problem. I learned that there was a sp4 (let alone a
sp3) for WLS. Installed that and the problem went away. Sorry for the
noise.
-Phil
Philip Bower <[email protected]> wrote in
news:[email protected]:
When I try to deploy the struts-example.war or if I add the struts.jar
to any other web app I've created, I get this error when I start WLS
and it tries to deploy that war.
java.lang.StringIndexOutOfBoundsException
at weblogic.servlet.internal.WebAppHelper.resolveManifestName
(WebAppHelper.java:469)
I'm using version 1.1b3 of struts. I'm having no problems with
version 1.0.2 of struts.
I'm guessing its complaining about the manifest file in struts.jar,
but I don't understand why.
Here's my version info and the stack trace (my web app is called
findme in this example). Thanks in advance.
-Phil
Server BuildWebLogic Server 6.1 SP2 12/18/2001 11:13:46 #154529
All Server Product VersionsWebLogic Server 6.1 SP2 12/18/2001
11:13:46 #154529 WebLogic XML Module 6.1 SP2 12/18/2001 11:28:02
#154529
<Feb 11, 2003 7:45:25 AM EST> <Error> <J2EE> <Error deploying
application findme: Could not load findme>
<Feb 11, 2003 7:45:25 AM EST> <Error> <Management> <ApplicationManager
starting Config caught throwable
java.lang.reflect.UndeclaredThrowableException:
java.lang.StringIndexOutOfBoundsException: String index out of range:
-1
at java.lang.String.substring(String.java:1525)
at
weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper
.jav a:469)
at
weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.j
ava: 234)
at
weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebApp
Serv letContext.java:3407)
at
weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServlet
Cont ext.java:3376)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContex
t.ja va:862) -
When will WLS 8.1 SP2 be GA ?
Hi BEA,
When will SP2 for WLS 8.1 be GA ?
I see some fixes i need on the release notes but
SP2 is not available for download.
Thanks
YshemiI bought my Icon just a few days over 2 months ago expecting it to ship with 8.1. I can not communicate how disappointed I am in VZ for NOT sending the 8.1 update out. I have used Apple and Android, each have their own following but to do this to paying customers is not right. I work for a software company that relys heavily on Microsoft products and we would NEVER do this to a customer. If it was not for the fact that I had terrible coverage from AT&T I would look at switching to another carrier but VZ is about the only reliable one where I live.
But this latest trick is more than disheartening, it should approach being illegal. And I had the same experience when asking about the Icon in a VZ store before buying it. The salesperson didn't want to talk Windows Phone anything and kept pushing Galaxy and iPhone. That is why I ordered mine online, because of their sales rep.
Not a good move VZ to keep customers happy! -
ERROR: Error from ejbc: in WLS 6.1 sp2 Win2K
Never had this problem before. Started new project using WLS 6.1 sp2 under Windows
2K Prof., using ANT & get;
ERROR: Error from ejbc:
In EJB NOTiFYEJB, method createUser defined in the remote interface either does
not exist in the bean class, or it is not a public method. Each method in the
remote interface must have a corresponding public method in the bean class.
BUILD FAILED
I saw a posting which referred to a problem with Win2K & an old (1.2) JDK in the
path. I have put C:\bea\jdk131 at the front of my class path but still get this
error.The problem was nothing to do with classpaths etc.
CMP does not support "Date" types and in my EJB I had Date types, I changed these
to "long" and converted all Dates to number of milleseconds from 1970 and persisted
them to a number column in Oracle.
It was the entries in the weblogic-cmp-rdbms.xml which was the root of the problem.
"Roger Lee" <[email protected]> wrote:
>
Matthew,
Thanks for yor suggestions.
My classpath is set in the ANT.BAT & only points to the tools.jar, weblogic_sp.jar
& weblogic.jar.
I have my JARs in a manfest file in each directory with the "Class-Path:"
entry.
I have also added a new Bean with compiles & ejbcs fine. But I still
get an error
with my "createUser" method, saying the interface does not exist in the
bean class
or is not a public method.
I have even changed it's name to "createUserCandidate" just in case it
was clashing
with an existing method.
Any other ideas for investigation?
Thanks.
Matthew Shinn <[email protected]> wrote:
Hi Roger,
Roger Lee wrote:
The "warnings saying classes are being loaded from your classpath"are, I believe
just warning from Ant. I searched the newsgroups and it appears thatthis is not
a problem.These warnings are from ejbc. They are there to let you know that classes\interfaces
needed by your EJB are being loaded from your classpath and not your
jar. They
should be taken seriously. This could definitely be the cause of your
problem. As I
said in my previous posting, ejbc could be loading an old version of
your bean class
from your classpath. This old class may not contain the createUsermethod
with the
same signature as the method in your remote interface.
Is this an issue with WLS 6.1 sp2?I don't believe so.
I've wasted so much time on this any help would be appreciated.You essentially have three options.
1. Take my advice and make sure your classes are being loaded fromyour
jar and not
the classpath.
2. Post your entire jar so we can try to reproduce the problem.
3. Contact support.
- Matt
Matthew Shinn <[email protected]> wrote:
Hi Roger,
Your bean and interface look fine. One thing you might try is explicitly
declaring
your createUser method to be public in your remote interface. I
don't
think this
will change the outcome but it's worth a try. When you run ejbcdo
you
get any
warnings saying classes are being loaded from your classpath ratherthan
your jar?
If this were the case, you could have an old copy of your bean inyour
classpath
that ejbc is picking up. If this doesn't help, I think the next
step
is to send me
or post your entire jar.
- Matt
Roger Lee wrote:
Typo that should have been "path", I had added "C:\bea\jdk131"
to
the
front of
my path & was getting the error.
Enclose my two classes in the attached file.
Thanks for you help.
Matthew Shinn <[email protected]> wrote:
Hi Roger,
Make sure you put C:\bea\jdk131 in front of your path (not classpath).
:) Assuming
this isn't the problem, can you please post any createUser method
declarations
in your
remote interface and the corresponding createUser methods in yourbean
class?
- Matt
Name: NOTiFY_&_NOTiFYBean.java
NOTiFY_&_NOTiFYBean.java Type: java/*
Encoding: base64
Maybe you are looking for
-
Automator crashes in OS 10.6.8
Running OS 10.6.8 on my late 2006, 13 in macbook2,1. Last few weeks have had multiple applications crash unexpectedly. Have verified and repaired disk permissions numerous times, verified hard drive a few times too. Took macbook to Genius Bar where t
-
Sender JDBC Adapter - Connectivity Problems
I installed JDBC Driver for Oracle 9 ojdbc14.jar on the J2EE Engine as per the instructions in the How To Guide. I updated the tnsnames.ora on the server appropriately. Also I could connect to Oracle database from the server using sqlplus. I configur
-
When I use my 2311x as an external monitor for my Macbook Pro, the monitor will start up and work until I try to move a window from the screen of my MacBook to the monitor, at which point the monitor will become disconnected from the computer. It wil
-
Macbook 2009 screen going black randomly
My macbook 5,2 circa about autumn 2009 (white plastic) keeps randomly going to black screen whether or not the power cable is plugged in. I've reset the SMC but no improvement. It sounds like the fan is running all the time too - and when the scree
-
I am running firefox version 3.6.8 with a win XP system. I can no longer click on a link in my aol mail. There used to be an option within the body of the e mail that i used to be able to click which would allow me to enable the link in the message a