WLS 8.1SP4 and the ever-increasing number of JMS connections

We are running a CRM application on a BEA WebLogic 8.1SP4 cluster and we are experiencing some regular performance problems.
When looking at the active JMS connections we see that they can increase till 800 current connections until the application slows down. It takes a very long time to generate the active JMS connections overview
The current number of connections is always nearly identical to the connections high value.
Do you maybe recognize this kind of behavior? Your comments, advice or suggestions are very much appreciated.
With kind regards,
Fred

Similar Messages

Excise No. using Accounting Document Number and the P.O. number

Hi All ! In my GL report, I'm displaying the Accounting Document Number and the P.O. number.
Now, the requirement is to display the excise no..
Tried different tables in SE11 using J_1EXC for excise detials, but to no avail.
And last which vendor to pick, Because vendors in P.O and BSEG differs.
If I use the BSEG-BELNR I get a different vendor & If I use the P.O. no. in EKKO then also I get a different vendor.
Please suggest.

Hi,
Actually the vendor in the accounting document and PO should match. If not look in table EKBE, It will have the accounting document or at least the invoice receipt against which accounting document would have been created. Check if the vendor number matches with the invoice receipt.
Regarding the excise number I'm not sure what you mean, If you mean excise invoice number, you can look at the J_1IEXCDTL
J_1IEXCHDR tables. You could check with FC on what basis the document is getting created to make out the relation ship. If it is vendor excise no etc. you can hit F1 help to find out the table etc.
Hope it helps.
Sujay

Inconsistency between a document field and the prof. segment number

Hi,
While processing an invoice in one company code for vendor# XXX with the PO# AAAA line# 10, it is showing below error message while posting. Please advise on the below error or fix the issue to post the invoice in to SAP. The using screen T-code is miro.
Inconsistency between a document field and the prof. segment number
*Message no. KE396
*Diagnosis
A line item was assigned to a profitability segment (number 0008629207) which has the value 0000101000 for characteristic Profit Center. The original document (FI document, sales order, internal order, etc.), however, contains 0000102020 in this field. It is therefore inconsistent with the profitability segment found.
System response
The characteristics in Profitability Analysis (CO-PA) must have the same characteristic values as the original document. For example, you cannot assign a sales order to a different customer or product than the one contained in the original sales order. If you wish to fill the characteristics with different contents, you must change the original fields.
Procedure
Enter the correct characteristic values on the CO-PA assignment screen. The system will automatically assign a corresponding profitability segment number. If it is not possible to enter values in some of these fields, delete the entire assignment to a profitability segment number and then enter it again.
As a rule, you should first enter the fields in the original sender document and then make the assignment to a profitability segment.
What should I do for the above pl ?
Regards
Murali

Hi,
While doing PGR at VL32N, we are facing this error. Can someone assist.
Regards,
Aruna

TS2565 when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

There was no new serial needed to update from Logic 9 to 9.1.7
If your Logic 9 was an upgrade from Logic 8 it may be asking you for your original Logic 8 Full serial first and then your Logic 9 Upgrade serial...
Otherwise, it's best to call Apple directly and get them to help you...

TS3367 when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. sugges

when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. suggestions??
i have also tried facetiming with several other people. the same thing has hapened every single time and it has always worked just fine until that 800 number called me.

Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
http://www.apple.com/support/systemstatus/

How do I insert a WAIT or a PAUSE function, followed by a constant string of numbers [international code, country code and the destination phone number].

I'd like to program a LOCAL ACCESS NUMBER, then insert a WAIT or a PAUSE function, followed by a constant string of numbers [international code, country code and the destination phone number]. Dialing the local, US access number is not an issue, but I can't find any info in the manual on how to insert a WAIT or PAUSE or how to insert the remaining string of international codes and destination phone number. Any help would be appreciated. Thanks!

How to Add Pauses when you Dial a Number on the Samsung Galaxy Note 3 - For Dummies
It is also described on page 42 of your owners manual...

My AppleCare protection plan wont register. I enter the number given and the correct serial number for my macbook but it wont work.

I have entered the correct registration number for protection plan and the correct serail number but it fails. I am outside calling hours (as I dont have protectionplan lol) and am eager to get it up and running.

Call AppleCare during regular hours and they'll register it for you. In the meantime, there is nothing for you to "get up and running" except your computer, and you don't need to register AppleCare to do that.

HT5824 I have a shares dealing account and the keychain account number seems to take over the stock codes I input meaning I cannot deal in shares any more. How do I turn that off?

I have a shares dealing account and the keychain account number seems to take over the stock codes I input meaning I cannot deal in shares any more. How do I turn that off?

should I just cry uncle and go to the local genius bar for instructions lol

My mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

Maybe this???
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

How to Know the How many number of JCo connections established?

Hi
How to Know the How many number of JCo connections established for mapping?

Hi
mConnection = JCO.createClient("001", // SAP client
              "<userid>", // userid
              "****", // password
              null, // language
              "<hostname>", // application server host name
              "00"); // system number
//Connections to a specific application server (as in the above example)
mConnection.connect();
//Creating the JCO.Client object does not connect to SAP, but a subsequent call to
connect() will accomplishes this
So you can easily find out the number of JCo connections by checking out these.
Thanks

I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G. Thank you

I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G. Thank you

This crap just happened to me this morning where I was sent 90% data plan threshold warningfrom AT&T (while sleeping at 7:09am) then 5 minutes later getting the Overage data plan warning from AT&T. This is all while I'm asleep right next to my phone plugged into a (non-Apple) dock on my clock radio.
Android has a limiting feature, why can't the "smart" guys at Apple learn from this??

I forgot my password to ipod touch and its disabled and the screen is telling me to connect to itunes

i forgot my password to my ipod touch and its disabled and the screen is telling me to connect to itunes but i cant do anything else.

I am having the same issue. My son misplaced his iPod touch and we recently found it under his bed. He then came to me saying he could not remember what his password was and the screen said it was disabled and to connect it to iTunes. iTunes says it needs to be unlocked. I have tried turning it off and then holding down the home key and then plugging it in but it fails to go into restore mode. I have attempted other variations as well (Holding down both the home and sleep buttons, etc but so far nada. Just curious if anyone else has seen a problem getting it into restore mode and if they found a solution.

Interactive Report and the mysterious invalid number

Hello,
I have an application that is ready, or so I thought, to be sent to a client to update an existing application. One page in the application has an interactive report that is based on a table in the parsing schema that is joined to the apex_collections view. The report works without issue in my dev environment as well as in the client's test environment. But when a colleague tested the updated app in a different test environment, the report errors out with an ORA-01722: invalid number error.
Needless to say I'm now hesitant about the update to production because I can't find the cause of the issue on my colleague's machine and would hate for this to happen in production. In trying to find the issue in on my colleague's machine, I first tried removing all of the columns (save the id) from the report to see if it was being generated there, no change. Then I started removing the joins and when the join to the apex_collections view was removed the error disappeared. The join was written as:
SELECT *
FROM table tbl
JOIN apex_collections col
   ON tbl.id = col.c001
WHERE col.collection_name = 'MY_COLLECTION';I know that the underlying tables for the apex_collections view store columns c001 .. c050 as VARCHAR2(4000) so I was relying on implicit data conversion to apply the join. Perhaps this is where the error is coming from but that would mean that "extra" rows are being returned as all of the c001 values returned in the session (from dev toolbar) are also valid numbers. As I said before, the problem is only occurring in 1 of 3 apex instances so I tested it in a 4th, and again, there was NO problem. I then realized that my query is potentially dangerous if c001 is used to hold something other than a number in the current session, which is NOT the case in any of the instances, but I tried updating the report to the following to see if it would help:
SELECT *
FROM table tbl
JOIN (
   SELECT TO_NUMBER(c001) AS c001
   FROM apex_collections col
   WHERE collection_name = 'MY_COLLECTION'
) apex_col
   ON apex_col.c001 = tbl.idThat query worked as expected in the dev environment and will be used as the query going forward. However, it failed to fix the problem in the "problem" instance. This seems to be a local issue but I'd like to know for sure. All of the systems are configured as follows:
1. Dev - Oracle 10g R2 XE - ApEx 3.1.2 - Works
2. Test1 - Oracle 10g R2 EE - ApEx 3.1.2 - Works
3. Test2 (colleague) - Oracle 10g R2 XE - ApEx 3.1.2 - Fails
4. Test3 (my localhost) - Oracle 10g R2 XE - ApEx 3.1.2 - Works
5. Prod - Oracle 10g R2 EE - ApEx 3.1.2 - ???
Any ideas?
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

Dan,
I'm always suspicious of problems that disappear without knowing why - usually they reappear the very moment that an end-user starts using the app :D
You didn't show how you are populating the collection in your original posting, so I'm not clear on exactly what the data would show. What I was thinking was, knowing that collections are all varchar2's, that something like TO_CHAR() had been used in the SQL statement that created the collection.
I don't think that trimming the data would have any effect. If the problem does happen again, I would suggest creating a report based on the collection (basically doing a data dump onto a page) and then see exactly what is in there. If any number contains a comma (or other characters such as currency symbols), then you have to use a number format string to get back to the actual raw number.
Andy

"In FBL5N unable to view purchase order number and the sales order number"

Hi,
Below mentioned is the problem we are facing,
In the Customer Line Item Display (FBL5N) it is vital for us to be able to view the customer's purchase order number as well as the sales order number for each billing document listed by customer.
We need to be able to extract this information for each customer and import to an excel spread sheet for analysis, specifically for our larger customers that have over 500 plus lines.
Kindly advise how to go about the same.
Regards
Harish

Dear,
Please also check note 152335. There, you will find a more detailed
explanation of the issue.
The only way to see some information regarding related PO-es in a Vendor
line items is a workaround. For example, it is possible to create
a substitution in order to fill in one of not currently used fields
like Reference, Text, etc.
I hope this helps You.
mauri

Table containeing both the purchase order number and the sales order number

hi all!!!
what is table that contains both the purchase order number and sales order number corresponding to that purchase order number.
Moderator message: please search before posting.
Edited by: Thomas Zloch on Jan 31, 2012

Hi Sunny,
Yes they are same. You will be creating a purchase order in ME21n. After creating purchase order you will shown a number for that order.
Reward points if useful.
Thanks,
Swamy Kunche

WLS 8.1SP4 and the ever-increasing number of JMS connections

Similar Messages

Maybe you are looking for