WLS Console doesn't reload chosen "Targets-Sever"

When I chose the "Targets-Server" in the WebLogic 6.1 console under Windows 2K
even though it writes the chosen target to the config.xml file it doesn't load
them when I re-start WebLogic Server. I then re-chose the "Targets-Sever" from
the console, which will again be written to the config.xml file, now with two
entries. I have to do this up to many times before I will get the "Start-up" class
or my JDBC drivers loaded at start-up, even though the Config.xml says the "target-server"
name.

Curious if you were ever able to find a resolution to this issue?
I am facing the same thing now with our Ant scripts and WL10.3 connection pools/datasources.
I would like to either specify a different LegacyType or suppress it altogether. Any help would be appreciated.
Many thanks,
Steve

Similar Messages

  • WLS Server shows as down, but is up in WLS console

    I have a WLS Domain discovered in OEM (12c). I used the same agent configuration and setup on all 3 servers in the cluster. Server 1 and 2 show as up, as well as the cluster and overall domain. Server 3 shows as down with numerous incidents flagged with Agent down and Weblogic Server Is Down. In WLS Console, all three servers are Running and working properly.
    What sort of emctl commands can be utilized to verify that the agent on Server 3 is communicating properly with the WLS? Or steps within OEM, perhaps to verfiy the communication. I have checked config files and setup procedures, and Server 3 is identical to Server 1 and 2, aside from the 1/2 vs 3 and corresponding hostnames. Looking for any sort of input...

    That is why I am confused. The agent is actually up. It is secured and sending metrics for the box perfectly. I can perform ./emctl upload agent successfully. When I navigate to Host Targets, the box shows as up. But when I navigate to Middleware Targets, on the WLS domain, Server 3, which is on that box, shows as down. The agent unreachable is cleared on that page, but it shows the WebLogic Server as down.
    When I access the WLS console, the server is up, running and working fine. That is why I am lost when it comes to my next step. If agent is working fine and the setup is identical to server 1 and 2. Why is it down, when the rest are up? I noticed in the Server3.log file, I am getting spammed with a Certificate error. "CERTIFICATE_UNKNOWN alert was recieved from *Server 3*. The peer has an unspecified issue with the certificate." I am getting the cert warning from server 3 on server 3. So is there a problem with some certificate and that is why the agent on server 3 can not communicate with the WLS?

  • EM 12c doesn't discover OAS targets

    Hi everyone,
    I've added 2 agents in my recently configured EM12c. Both of them have an Oracle Application Server with the same applications running in it (they are just a mirror for some operations). For some reason EM only recognize the OAS in one of the agents but totally ignores the targets in the other one, and they are just the same thing!! The only thing it discovers is the agent (that was installed and deployed correctly) and the oracle home inside of it, but no sign of the rest of the applications running.
    I've tried all the manually add targets options inside the console and also tried with the instructions in this link How to Troubleshoot OEM 12c Cloud Control Auto-Discovery. However I'm running out of ideas, if you have any guidance it will be appreciated.
    Néstor

    Well, after giving the correct permissions to the folder the em pointed ($ORACLE_HOME/opmn) I tried the discovering again and it doesn't work. I'm new with oracle and its environment so I'm not quite sure if I'm looking for the correct logs but here is some output I found interesting from the oas host.
    From the log agent_inst/sysman/log/gcagent.log :
    2013-08-29 13:28:40,719 [32:25FBB80B:HTTP Listener-32 - /emd/main/ (~Task-free~ OMS.console@19331@EMHOST=>[137779912060001])] INFO - >>> Dispatching request: GetTargetsRequest (host. (include host and TZ)) <<<
    2013-08-29 13:28:40,723 [32:25FBB80B] INFO - >>> Reporting response: GetTargetsResponse (request id 1) <<<
    2013-08-29 13:28:40,748 [32:C0DE63B8:HTTP Listener-32 - /emd/main/ (DispatchRequests OMS.console@19331@sholazar=>[137779912060002])] INFO - >>> Dispatching request: GetMetricDataRequest ([email protected]{pluginId=oracle.sysman.emas, discCategory=ORACLE_IAS, onDemand=true, __gcagent__.isOutputSensitive=true}) <<<
    2013-08-29 13:28:41,689 [32:C0DE63B8] INFO - >>> Reporting response: GetMetricDataResponse (***OUTPUT IS SENSITIVE***) (request id 1) <<<
    2013-08-29 13:28:41,690 [32:C0DE63B8] INFO - observed collection value for column "DISC_STDERR" is null for metric DiscoverNow on host target X.X.X.169; removing
    2013-08-29 13:28:51,989 [90:C6397182] INFO - attempting another heartbeat
    2013-08-29 13:29:32,186 [34:77706C7:HTTP Listener-34 - /emd/main/ (~Task-free~ OMS.console@19331@sholazar=>[137779917210001])] INFO - >>> Dispatching request: GetTargetsRequest (host. (include host and TZ)) <<<
    2013-08-29 13:29:32,190 [34:77706C7] INFO - >>> Reporting response: GetTargetsResponse (request id 1) <<<
    2013-08-29 13:29:32,214 [34:7BC984B8:HTTP Listener-34 - /emd/main/ (DispatchRequests OMS.console@19331@EMHOST=>[137779917210002])] INFO - >>> Dispatching request: GetMetricDataRequest ([email protected] {pluginId=oracle.sysman.emas, discCategory=ORACLE_IAS, onDemand=true, __gcagent__.isOutputSensitive=true}) <<<
    2013-08-29 13:29:33,113 [34:7BC984B8] INFO - >>> Reporting response: GetMetricDataResponse (***OUTPUT IS SENSITIVE***) (request id 1) <<<
    2013-08-29 13:29:33,114 [34:7BC984B8] INFO - observed collection value for column "DISC_STDERR" is null for metric DiscoverNow on host target 180.180.169.169; removing
    2013-08-29 13:29:52,027 [36:88AC468A:GC.SysExecutor.0 (Ping OMS)] INFO - attempting another heartbeat
    2013-08-29 13:30:08,006 [19817:1D9D1D2C:GC.Executor.5222 (host:X.X.X.169:LoadSunOS) (host:X.X.X.169:LoadSunOS:Load)] WARN - Found a row with more columns than declared for the metric for TargetID = X.X.X.169, Metric = Load
    Row = *** row contents suppressed ***
    2013-08-29 13:30:52,063 [84:9FC136A7:GC.SysExecutor.3 (Ping OMS)] INFO - attempting another heartbeat
    In the em console it only says "No Targets found". If you could guide me to other logs archives I will add the output here.
    - Nestor

  • After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

    after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
    Although IE11 works, it doesn't work correctly.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • IO Error while creating the Datasource in WLS Console

    Hello,
    We are using Jdeveloper 11.1.1.1.7, I am trying to create a Data Source using WLS Console, I am getting below error
      - I tried creating DB connection using SQL developer with same DB Connection info, it works fine.
      - I verified the Port by logging into corresponding UNIX box where weblogic server is running, I did telnet, and able to connect.
    any ideas are appreciate.
    Connection test failed.
    IO Error: The Network Adapter could not establish the connection<br/>oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:489)<br/>oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:678)<br/>oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:234)<br/>oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)<br/>oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)<br/>oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)<br/>oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:674)<br/>oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267)<br/>oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134)<br/>weblogic.jdbc.common.internal.DataSourceUtil.testConnection(DataSourceUtil.java:314)<br/>com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:734)<br/>com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:474)<br/>sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)<br/>sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)<br/>sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)<br/>java.lang.reflect.Method.invoke(Method.java:606)<br/>org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)<br/>org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)<br/>org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)<br/>org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)<br/>..

    The Network Adapter could not establish the connection exception is caused by one or more of the following configuration errors:
    The database host name, port number, or database instance name is wrong.
    The database TNSListener has not been started. The TNSListener may be started with the lsnrctlutility.
    C:>lsnrctl start
    1. What is the connection url?
    2. Is Oracle database running?

  • WLS-Console export vs JMS browse API

    Hi -
    We are attempting to solve a problem revolving around JMS pagination and seek your help.
    We have a scenario where in certain cases the application queues pile up due to the input flow being far higher than the consumer application capacity.
    In this scenario, we would like to have a mechanism where we can drain out the queues.
    We wrote up a custom script which would read the messages in a queue and dump the values in a file.
    This seems to work for smaller numbers, but when the pile up grows (in number in our case around 20K messages) it appears that the messages are being paged out we see a heavy slow down effect (we have filters on the JMS headers).
    One suggestion was to export all messages present (by compromising on the ability to filter messages) through the functionality present in Weblogic console. Wanted to check if the performance of the export (on the WLS console) would remain linear irrespective of the number of messages or would we still hit a performance block if the messages are paged.
    TIA,
    Senthil
    Edited by: 920205 on Mar 12, 2012 3:23 AM

    Exporting messages may be practical here either.
    I am not sure if you have looked at the JMS performance tuning guide, which has a section for handling messages backlogs.
    My suggestion would be to see if you can add producer flow control and message expiration with error destinations.
    For more details, please refer to http://docs.oracle.com/cd/E17904_01/web.1111/e13814/jmstuning.htm#CHDIJEFE
    Hope this helps.
    Dongbo

  • Exchange 2007/2010 Console doesn't show up Exchange 2007 Databases after RBAC Implementation

    I have implemented a RBAC model after which Exchange 2010/2007 Console won't show up Exchange 2007 Mailbox Databases.
    Everything was working fine up until the Users were members of "Exchange Recipient Administrators" Group.
    I have created Custom Roles based on PArent Roles, Mail Recipients, Mail Recipient Creation, Distribution Groups & Public Folders and assigned that to a universal security group "Helpdesk operations". I removed membership for Helpdesk operations
    from "Exchange Recipient Administrators" Group and assigned the Custom Roles to "Helpdesk Operations" using the cmdlet below:
    New-ManagementRoleAssignment "Custom Role" -SecurityGroup "HelpDesk Operations"
    Exchange 2010 console shows Exchange 2010 Databases but not Exchange 2007 DAtabases. Exchange 2007 console doesn't show up any databases on New-Mailbox and simply displays a message "No Objects Found".
    Even Get-MailboxDatabase REturns blank output on Exchange 2007 SHell. Please help me with this and let me know in case if there is something that i need to be looking at!
    any help on this is much appreciated.
    M.P.K ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your question. ~~ This
    Information is provided is "AS IS" and confers NO Rights!!

    Hi,
    I recommend you use the following cmdlet and check the result.
    Get-MailboxDatabase -Server "Exchange 2007 server name"
    In my environment, if I don't specify the Server parameter on Exchange 2010 Management Shell, Exchange 2007 mailbox database can't be displayed. If I specify the Server parameter, Exchange 2007 mailbox database will be displayed.
    What's more, please check if the account you use has been delegated the Exchange View-Only Administrator role.
    Here is a thread for your reference.
    Get-MailboxDatabase
    http://technet.microsoft.com/en-us/library/bb676367(v=exchg.80).aspx
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • BPEL Console doesn't show any instances created

    Hi,
    We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
    Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
    The BPEL process is simple flow with one receive , transform and invoke activity.
    I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
    I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
    Please help.

    Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
    Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
    Kalyan

  • Sun Oner Application Server 7 Admin Console doesn't start

    When I start the Admin Console for Sun One Application Server 7, and after I login, the admin console doesn't display in the browser. I have tried starting the admin console with IE and Netscape browser, but the admin console has failed to start in either IE or netscape.

    -Type this in your IE
    http://localhost:4848
    -IF it does not work type the following
    http://kishan:4848 ("kishan" is your machine name)
    -IF it does not work do the following
    Forgot the Admin Server Port Number? If you do not remember the HTTP server port number of the administrative server, you can inspect the administrative server's configuration file to determine the HTTP server port number.
    1. Navigate to the <domain_config_dir>/domain1/admin-server/config/ directory.
    2. Open the server.xml file in your favorite editor. Look for the element:
    <http-listener id="http-listener-1" address="0.0.0.0" port="4848"...
    In this case, port 4848 is the HTTP port number in use.
    Forgot the Username or Password? If you do not remember the administrative user name that was supplied during installation, try the user name "admin". This is the default user name specified in the server configuration dialog during installation. If you still cannot determine the user name, look in the following file:
    <domain_config_dir>/domain1/admin-server/config/admpw
    This file contains the administrator's user name followed by the encrypted form of the administrative user's password.
    If you do not remember the administrator's password, then you can delete the administrative domain using the delete-domain subcommand of asadmin and create a new domain with a new administrative password.
    Port Not Accessible? If the connection was refused when attempting to contact the administrative server's admin console application, it is likely that the administrative server is not running. Go back to the beginning of this section and double check the your startup procedures and the content of the administrative server's log file to determine the reason why the server is not running.

  • Console doesn't recognize database anymore

    Hi folks,
    Being kind of an oracle newbie, I suffer some strange problems: I had Oracle 8i up and running perfectly well on my w2k machine. I was able to do backups and exports from out of the console. Next day, the export failed due to an authentication error which must have come out of a sudden since nothing in configuration was changed. I set a new system password for the default node user which solved this problem. Now a protocol adapter error was announced. I shut down and rebootet the entire system and now, console doesn't see my database anymore, though all services ar started. What's this?
    Regards, Claus.

    After reinstalling iTunes, it works.

  • The app console doesn't match. It gives error -1712

    THE app console doesn't match. It gives erro -1712. The store has already changed the memory

    Try using Google's DNS instead of the one your IPS is providing.
    - To change on the iPod go to Settings>wifi and change the DNS to 8.8.8.8
    - For the computer see:
    Public DNS — Google Developers
    - Did anything happen to your router right before this started? Maybe the router is blocking the port used.

  • Management Console Doesn't Display

    Hi Experts ,
    we are facing issue with Management Console doesn't display after login ,none of the screens shows any user or activity data.
    Our DB admin went through the prerequisite list from note 1262933 and everything appears to be correct with the setup.
    Regards
    VYVadan

    Hi. Just to clarify. Is the bpclog table being populated in the appserver db?
    Byron

  • Console doesn't start?

    Hi
    I installed WLS6.0 SP1 to NT4 SP6. Console doesn't start when I'm logged to
    our domain. Dr. Watson reports application error in beaexec2.exe. When I'm
    logged in as a local administrator console works fine. What's wrong?
    Seppo

    I am having the same Problem.Can anyone give some suggestions

  • Error in WLS console

    Hi,
    Am getting the below error in my wls console .
    please help how to resolve this.
    <Mar 20, 2012 2:44:38 AM PDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "WebCenter-CustomPortalDS": IO Error: The Network Adapter could not establish the connection>
    <Mar 20, 2012 2:44:38 AM PDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "Activities-CustomPortalDS": IO Error: The Network Adapter could not establish the connection>
    <Mar 20, 2012 2:44:39 AM PDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "WebCenter-CustomPortalDS": IO Error:

    Check if you are able to login with the users for all the schema's for the data-sources.
    If you get account locked exception then unlock it.
    http://ramannanda.blogspot.in/2012/02/oracle-database-account-unlocker.html
    Else check the connection properties in your application.

  • Edit env-entry values from web.xml in the WLS console.

    Hi guys!
    Is it possible to define JNDI variables of type java.lang.String using WLS Console?
    Thanks

    I think this would require the use of a deployment plan, which you can learn about here: [http://e-docs.bea.com/wls/docs103/deployment/config.html] . This won't be as convenient as just editing the value directly in the admin console. In fact, it won't even prevent the requirement of redeploying the webapp. It will only allow you to make the change without rebuilding and repackaging the webapp.
    It's questionable whether it's practical or meaningful to change env-entry values in a web.xml without redeployment, because even if you could change the values without redeploying, you'd have to reinitialize the servlet/filter with the changed environment parameter.
    If you really need this dynamic reconfiguration ability, you might have to design the facility into your application, using some sort of polling or event handling capability.

Maybe you are looking for