Wls needed for jdev11.1.2.0 studio edition?
Hi
I installed jdev 11.1.2.0 studio edition.
for this should I install weblogic server to deploy any application developed in jdev????
I developed a simple insert application.
nw I want to deploy it,
for this i need to create application server connection ,
in application server conection i gave default id and pwd ( system, weblogic) and I gave the server ports and all
but wen I test it its not getting success. out of 9 only one 1 iz success
Testing JSR-160 Runtime ... failed
Cannot establish connection.
Testing JSR-160 DomainRuntime ... skipped
Testing JSR-88 ... skipped
Testing JSR-88-LOCAL ... skipped
Testing JNDI ... skipped
Testing JSR-160 Edit ... skipped
Testing HTTP ... failed
Unable to open conection: Connection refused: connect
Testing Server MBeans Model ... skipped
Testing App Controller ... success
1 of 9 tests successful.
Similar Messages
-
What type of mac do i need for home use to watch and edit videos
What type / power of MAC do i need for home use to watch and edit vedeos as well as basic computer work?
Any of the new Macs for home - iMac or MacBook Pro are even fine. You don't need a 65lb workstation tower. If you want a tower for how well and long they hold up, and can be upgraded, that is another matter and fine and might be overkill at first.
Even the base Mac Pro will get you there. -
Licence needed for Developer Studio ?
Hi all,
is a licence needed for installing SAP NetWeaver Developer Studio ?
Thanks in advance.You donot need a license for developer studio.
It is based on Eclipse which you can download and install without license anyway.
You will need a (developers) license for the developers workplace however. This is the version where you also run your local Netweaver J2EE. If you donot have a license, after 30 days or so the J2EE wil stop (approx. 30 minutes after startup) with an error message like: no valid license.
The license for the Developers Workplace can be requested like any other license. Your basis team will know the details.
Jurjen.
([https://websmp205.sap-ag.de/licensekey|https://websmp205.sap-ag.de/licensekey]) -
I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
-
What all is needed for this type of Flash Design Studio
What all is needed for this type of Flash Design Studio.
There are a couple of sites out there that use both flash and
shockwave. I am looking ot get somethign like this started and need
some help getting pointed in the right direction. here are some
examples:
http://www.uberprints.com/studio/
http://www.customavenue.com/online-design-studio/online-design-studio.html
https://www.youdesignit.com/youdesignit.cfm
http://www.pixeltees.com/makeRclarkhaddock,
> What all is needed for this type of Flash Design Studio.
There
> are a couple of sites out there that use both flash and
shockwave.
Of the examples you showed, I saw Flash (Adobe Flash),
Shockwave (Adobe
Director), and JavaScript, but never a combination on the
same site. (It
might make sense to combine Flash with JavaScript or
Shockwave with
JavaScript, but not really to combine Flash with Shockwave.)
> I am looking ot get somethign like this started and need
some help
> getting pointed in the right direction.
Any of the above technologies will do it. You could also use
a Java
applet or even a .NET solution of some kind, so the choice
you take will
depend largely on what platform you want to support and code
for. This sort
of project will require significant amounts of custom
programming. My
personal approach would be to use Flash, mainly because of
the popularity of
the plugin. The Shockwave example looks beautiful, and I
started out years
ago using Director, but fewer people nowadays have the
Shockwave plugin
installed. It doesn't look like any of the sites shown use 3D
modeling,
which is the only relevant feature that Shockwave has over
the other
approaches. JavaScript (probably some Ajax approach) would
work -- as
seen -- but then you're dealing with compatibility issues
among various
JavaScript implementations in the great variety of browsers
out there.
Flash minimizes that, in my opinion.
All you really "need" to produce what you've seen is Flash
and some sort
of database back end (MySQL, say), which means you'll need a
bit of
middleware (PHP, ASP, Cold Fusion, etc.) to act as your
ambassador between
Flash and the database.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design." -
Hi everyone ☺
I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
So, here’s what I came up with:
a) getting logic pro studio 8 and apogee duet
b) getting pro tools m-powered and mbox 2
c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
Now, the questions are:
if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
NeptuneThank you Bee Jay and Pancenter for the lighting-fast and useful answers
now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience? -
Files or Folders needed for blu-ray disc missing !
Hi,
I have Encore CS6. It successfully builds 'blu-ray folder' & 'blu-ray image' without any error. But when I try to create an iso image of the prepared folder using 'Ashampoo Burning Studio' it gives an error message saying that the folder doesn't contain all the files and folders needed for blu-ray. But when tried to do the same for DVD, there is no error. My blu-ray burning drive is broken and I want to check my finished project from my hard drive using Daemon's Tool and VLC or PowerDirector.
Could anybody advise how this can be fixed on Encore CS6. Encore CS5 never had this problem.
ThanksTried that as well. The player gave an unrecognized format error.
-
64-bit WLS 11G for Solaris?
I can not locate the 64-bit version of WLS 11G for Solaris. When I go to the download page all I see are 32-bit versions (at least they look like 32-bit version as denoted by the filenames such as wls1031_solaris32.bin).
I have attempted to go through the e-delivery site but do not want to download a 21 part 11Gig file if it is not the correct one.
I would appreciate any help at all.I am pretty confident that you need the 64 bit JVM for your platform, then you need to use the generic installer, this is based on how it has been done in prior releases.
So you can find the available JVM's for your platform here:
http://www.oracle.com/technology/software/products/ias/files/oracle%20fusion%20middleware%2011gr1%20(11%201%201%201%200)%20certification%20matrix.xls
In this case that would be Sun JVM 1.6.0_11+
OR
JRockit 6 Update 5 R27.6.2+
Then you should be able to run the generic installer here with that downloaded supported JDK:
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
I was not able to find anything specific on the documentation pages that described this process in detail, but you can always open a support case to get some assistance. I will check with the documentation team to see if that is going to be documented or already is.
If you look at the 10gR3 releases, it shows how the generic installer is used, for example:
http://e-docs.bea.com/platform/suppconfigs/configs/solaris/solaris10_103.html#104355 -
I really just need the simplest solution. I have cleaned out old folders on the OMBP, but there are folders I need for work.
I am not a technical person. I have gone online and read a gazillion "All Ya Gotta Do...." to the point where my head swims.
I backed up my older MBP onto WD Passport Studio via Time Machine.
I transferred all my files there and put them all onto the newer MBP.
I expected to see Mail but did not.
Someone said just use Migration Assistant, but I dont find that anywhere.
Please dont say iCloud because I dont even know what it is. Sorry, but I just dont use my Mac other than for work, meaning online access for research, and then typing reports of various kinds... and for emailing.
Can I just hook the firewire directly from OMBP to NMBP and copy them that way??
Sorry I am such a dolt, but I really just want easy step by step instructions, thank you.
Would the Genius Bar at my local store be able to help me???
Thank you,Okey Dokey!
I followed the steps for the Target Disk thing, and was able to transfer everything on my old desktop, in my old pictures file... all the final transfers regarding my documents and photos.
BUT
there were no folders for Mail, and when I went to the only folder I could find that said "Mail" -- which was under "applications" it then told me that I could not transfer old "mail" to new "mail" since they were different versions...
Now THIS makes sense,,, and I was not looking to do that...
but how do I find all my mail folders????
Is there someplace I should be saving them in order to get them???
Do you mind helping me with instructions on how to do this?
Thanks! -
Setting up default value for POV in Financial Reporting Studio
hello
We need to Set up default value for POV in Financial Reporting Studio. For example, we need period to pick up Sep as default value when we run the report.
Is there any way we could do this???
Regards
NehaHi Neha,
Yes, there is a way to setup of your grid POV. Take a look at this: http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/127.html
Cheers,
Mehmet
p.s. Please mark the answers helpful or correct, if they've helped you or answered your question. Thanks! -
Introduction:
I apologise for the length of this post but from experience of reading here, I'm working on the principle of the more I explain about myself now, the less anyone willing to help me will have to ask later.
I have lurked around this forum on and off for a few years, read the various threads in the FAQ section, particularly PPBM5 and What PC to build thread and other related topics around what system to build. I have found them very useful and in particular have enjoyed reading about Harm Millaard's experiences First Ideas for a new system. For about about 12 months I've been delaying upgrading my PC but in Mr Millard's latest updates on his PPBM6 site he talks about new systems and provides a link to Intel's time line which suggests they are in no rush to replace the i739xx series CPU chip - which has I believe amongst other things 2 cores disabled. Normally bitter experience has taught me not to rush out and buy the latest technology but let others "test" it first and then benefit from reduced prices as that model is replaced. However, it now seems like last years technology is going to remain as this years technology and probably the first 2 quarters at least of next year and, if anything, the price of the i739xx series is at best staying at it's existing launch price or even rising. So it's time to take the plunge for me and upgrade.
My current hardware for editing:
I started with Premier 6.5 after I bought it as part of a bundle with a Matrox RTX 10 card - one of the most temperamental pieces of hardware I've had the misfortune to work with. I later upgraded to Premiere Pro 1.5 and edited with that using a Pentium 4 2.6 (overclocked to 3.2), 3 hard drives (no raid) and 4G of memory. The video footage used was avi recorded using a Canon MVX 30i and Panasonic NVGS27 and now I've added the Casio Exilim EX -FC100 (mpeg format) and a Panasonic HDC S90 (AVCHD).
My PC coped with the editing I did with avi footage but couldn't handle AVCHD format and this convinced me to upgrade to Premiere Pro CS5.5. At the same time I switched to editing on a Dell XPS M1530 (Centrino duo chip) - I upped the memory to 4GB, put Windows 7 64 bit home edition on and replaced the existing hard drive with a faster one. In addition I use a SATA Quickport duo attached to my laptop via an eSATA card. However, either the Quickport, eSATA card or XPS is extremely temperamental - I never see two external hard drives, 50% of the time see 1 external drive or none at all - when that happens I edit around it doing things I can with just the one internal drive - but this problem is not my question.
The type of editing i do:
I know people usually say around here not to try editing on laptops and believe me, I understand why, but using this setup I have been able to edit lots of videos - see here for examples of the type of editing I currently do:
http://www.youtube.com/user/PathfinderPro
The equipment test videos place the biggest strain on the hardware when editing. And, to do this editing I have to convert my AVCHD footage in to it's YouTube format before editing and even after I've done that it can be tediously slow to edit and playback even with premiere set to play at 1/4 normal quality. To convert the AVCHD footage to the YouTube format I edit in has to be done over many nights.
Now I am not a professional, I typically edit with up to 4 tracks of video with additional tracks for titles and my target audience is YouTube - which is why I can get away without editing in my prefered option of native AVCHD video format. However, I'm tired of all the waiting, stuttering, and many many days and hours of converting videos into a format I can use so I'm looking to upgrade. My problem is though I'm uncertain what path to take. The PPBM results are dominated by overclocked chips, and whilst the motherboard make and model is listed, the hard disks used, graphic card makes and models and memory modules are not. This is not a criticism of the PPMB tables (big thank you to Bill Gehrke & Harm Millaard for taking the time and effort to pull this much information together) but for me, I am not interested in being in the top 1000 in the world, nor overclocking like mad, and having had horror experiences of using matrox products and compatibility and stability issues with other hardware I'm more interested in compatability and practicality than speed when deciding what to build. I've also read the threads about marvel controllers, dual and quad channel memory support, the pro's and cons of SSD or standard drives, raid setups, the heat problems with overclocking the newer ivy bridge chips and general build advice etc so I'm not coming here without having done some reading first.
The type of system I'm thinking of:
So far based on what I've read here, I've come to the conclusion - but I'm open to suggestion:
- Chip - regrettably due to the cost and unlikely successor anytime soon - a 39xx (with appropriate cooler) because I want to edit in native AVCHD which seems to require the warrior type chip as opposed to the "economical" build regardless of what my target audience is and this suggests
- X79 motherboard (which must have an old PCI slot such as the Asus Sabertooth and which has room for the cooler I'm considering). As I will be carrying over my old terretec DMX 6 fire 24/96 soundcard - all my videos have their audio mastered in Audition using this card - best piece of advice I read was the audience will watch a bad video with good sound editing but not the other way round)
- 4 hard drives plus additional hard drive for operating system using onboard raid controllers (not sure whether the operating system drive will be WD caviar black or SSD and can't justify cost of external raid controller for either my type of use or number of hard drives being used)
- Video card - I can now buy a GTX 580 for less than the 670 - so not sure on the card especially based on Harm Millards observations that memory bandwith seems to be as important as CUDA cores
- Case - I have an Akasa 62 case with room for 5 hard drives - I won't be exceeding that, and if I overclock it will only be by a little so is it really necessary to replace it for a Tower Case - although I would prefer a case with a front connection for esata so I may have to change the case regardless
- Maximum memory 32G - so is it necessary to upgrade to windows 7 professional?
- Power source - I'll work out when I've decided on my components.
Help please:
For me it's video source/dictated software chosen and hardware/audience(youtube) dictates format edited in. As I don't intend to change my camcorders format (AVCHD or mpeg) in the next couple of years and I'm not interested in having the "fastest" system around what I'm really interested in learning is:
what system setups people use now for doing similar editing to me
what make/models of the component parts in your system work well together
and if you do have a bottle neck in terms of hardware, where is it and what hardware would you change to (not a dream model change, just a practical and realistic one)
I have deliberately not given a budget for the changes I'm intending because budget should not be the deciding factor in determining what I "need" to upgrade to for the "type of editing I do" - especially bearing in mind I've got by so far (admitedly at a tortoise pace) with by todays standards a standard spec laptop. Basically I don't want a Rolls Royce to go shopping at Wallmart but I'm tired of walking there and carrying everything back by hand!
Thank you very much for any help / experiences people can share.Thank you both for your prompt and helpful replies.
Mr Millaard, regarding your excellent article Planning and Building an NLE system, I have read it a couple of times now and it was your article which finally convinced me the time was now to upgrade but within it you said for good reason "Initial choice of CPU: i7-39xx with the intention to overclock to 4.6 - 4.8 GHz", hence my uncertainty about the CPU to use. I have seen a video you posted here - I think it was based on your cats (which I incidently enjoyed) so working on the editing done there (but not remembering if you mentioned what video format you used) and others who have mentioned many pro's for the i7-39xx I was leaning towards that - but I'm financially relieved at least - if the i3770 will do, although now with the possible recommendation by JEShort01 (sorry not sure of the forum etiquette for use of names) of the 2600K overclocked I'm a little bit back in the position of which is more suitable especially with the update to the i3770 being nearer than i7-39xx. This still makes me lean towards the i7-39xx.
Regarding the editing, the match play you can see on the channel is indeed 1 camera basic edits - multiple titles used to provide the score board. However, the coaching videos use mulitple cameras - 3 to 4 sometimes (another reason for upgrading to CS5.5 for the multi cam editing support) and the equipment testing video can use 3 or 4 tracks layered on top of each other other with each track having opacity settings and multiple motion effects and titles with occasional keying video effects added. For example this video at approx 2 mins 50 and 5 mins 10 seconds.
http://www.youtube.com/watch?v=T1E5T7xo57c&list=PL577F7AB5E31FC5E9&index=13&feature=plpp_v ideo
Monitor wise I use dual monitor setup. My laptop screen and I link out to an LG M2394 D for widescreen and I sometimes use an old Neovo F-419 for 3 / 4 editing. I won't be using more monitors than 2. If the 580 drops a bit more I'll probably go for that - although I'll have to make sure it's size isn't an issue for the motherboard combo setup. Interestingly there is a thread shown on the forum home page which discusses the 570 vs the 660ti and the opinion was go with the 660ti which surprised me a bit.
Windows 7 professional it is then - I should have known that too - apologises for asking a question already asked.
"Accepted, your correct criticism of the lacking hardware info on the PPBM5 website. That is the overriding reason that for the new site http://ppbm7.com/ we want to use Piriform Speccy .xml results to gather more, more accurate and more detailed hardware info."
No criticism intended Mr Millaard - more an observation and I really look forward to that evolution with PPBM7. I'm assuming the .xml results will use pre populated drop down lists people can select their hardware from - that way you can control and ensure consistent entries - downside being the work required by you to populate the lists in the first place and maintain them.
Thanks again for your help but I'm still unsure a bit about the CPU and video card though. -
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
XMLAGG structure, performance help needed for odd nesting in schema
Hello,
I have to produce XML to look like:
<?xml version='1.0'?>
<enterprise>
<membership>
<sourcedid>
<id>PHYS_101_001_FA2007</id>
</sourcedid>
<!-- NOTE: absence of "members" level tag for XMLAGG! -->
<member>
<sourcedid>
<id>D2LU0001</id>
</sourcedid>
<role roletype="Sample Role">
<status>1</status>
</role>
</member>
<member>
<sourcedid>
<id>D2LU0002</id>
</sourcedid>
<role roletype="Sample Role">
<status>1</status>
</role>
</member>
</membership>
</enterprise>This would be straightforward if the schema allowed for a "<members>" tag under which to nest the <member> tags. But, it does not allow for that tag or any other than those listed above.
I have a query which does produce that output (except for the roletype attribute), but its performance is horrible; it takes about 40 minutes to return data:
SELECT
XMLROOT(
XMLELEMENT("enterprise",
XMLAGG(
XMLELEMENT("membership",
XMLFOREST( XMLELEMENT("id",cx.mapped_course_id) as "sourcedid"
(SELECT XMLAGG(
XMLELEMENT("member",
XMLFOREST(XMLELEMENT("id",spriden_id) AS "sourcedid",
XMLELEMENT("status",'1') AS "role"
FROM enrollments_fall_sfrstca efs
, spriden sp
, gzv_tuid t
WHERE sp.spriden_change_ind IS NULL
AND sp.spriden_pidm = t.pidm
AND t.tuid = efs.user_name
AND efs.mapped_course_id = cx.mapped_course_id
AND efs.term = cx.semester
, VERSION '1.0', STANDALONE NO VALUE)
FROM courses_xt cx
WHERE cx.semester = :term_code
;Similar queries are producing courses and users XML fine with no performance issues, but these are driven off either the courses view or the enrollments view, but not both.
Is there some other way I can produce the nesting I need for the vendor's schema?
The source views are basically as follows (showing relevant columns only):
courses_xt:
MAPPED_COURSE_ID SEMEST
AVFT209-13307-201210 201210
AVFT210-13308-201210 201210enrollments_fall_sfrstca:
MAPPED_COURSE_ID USER_NAME
AVFT209-13307-201210 FULLERC8
AVFT209-13307-201210 SHUPEK
AVFT209-13307-201210 NOMAN
AVFT210-13308-201210 SHUPEK
AVFT210-13308-201210 PELLONMWhen I have the query without the XML (with the subquery as a column of the outer query), this returns the correct data quickly (a couple of minutes).
I have tried various permutations of XMLFOREST, XMLELEMENT, XMLAGG but either I get syntax errors, or the data is wrong (e.g. repeated '<membership>' for each '<member>', or I have to create an invalid tag '<members>' to be filtered later).
Please advise!
Thanks,
Anita LeesHi Anita,
Have you tried with a GROUP BY and no subquery?
Here's an example using SCOTT schema.
I've used the same tag names and structure so that you can see the analogy :
SELECT XMLElement("enterprise",
XMLAgg(
XMLElement("membership",
XMLElement("sourceid", xmlelement("id", d.deptno))
, XMLAgg(
XMLElement("member",
XMLElement("sourceid",
XMLElement("id", e.empno)
, XMLElement("role",
XMLAttributes(e.job as "roletype")
, XMLElement("status", '1')
FROM scott.dept d
LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno
WHERE d.deptno IN (10,20)
GROUP BY d.deptno
;which gives :
<enterprise>
<membership>
<sourceid>
<id>10</id>
</sourceid>
<member>
<sourceid>
<id>7782</id>
</sourceid>
<role roletype="MANAGER">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7934</id>
</sourceid>
<role roletype="CLERK">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7839</id>
</sourceid>
<role roletype="PRESIDENT">
<status>1</status>
</role>
</member>
</membership>
<membership>
<sourceid>
<id>20</id>
</sourceid>
<member>
<sourceid>
<id>7369</id>
</sourceid>
<role roletype="CLERK">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7902</id>
</sourceid>
<role roletype="ANALYST">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7566</id>
</sourceid>
<role roletype="MANAGER">
<status>1</status>
</role>
</member>
</membership>
</enterprise> -
MSI ti 4200 128 MB and Problems with "Need for Speed: HighStakes"
Does any one know of a fix for "Need for Speed: HighStakes" with the new 45.32 drivers. When trying to start this game it won't even load, the screen goes dark for a second and then falls back to the desktop. Did the same thing with 43.45, but if I install the drivers that came with the Video card ( I think they were 31.XX) then the game works fine. Haven't come across any other games that won't run except this one, some examples that work fine are UT 2003, C&C: Generals, Warcraft 3, Hot Pursuit 2.
System:
XP pro OS (sevice pack 1) DirectX 9
Athlon 1800
512 MB RAM
MSI nforce 2 Main board
MSI GeForce 4 4200 ti 128 MB 8X AGP
Thanks for any info.well I "bugged" the game makers (EA) and the response is that the game doesn't suport Windows XP. Strange that the older nVidia 31.xx drivers work fine with the game. Also played it on my last machine which had XP and a ATI radeon video card. OH well who ever said Direct X was supposed to be backward compatible.
Too bad the older drivers don't work so well with the newer games. -
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?
Maybe you are looking for
-
How can I sync my iphone 3gs with iTunes?
How can sync My iPhone 3Gs with iTunes? My phone is activated, but not in service. It's connected to my computer and I have downloaded iTUNES onto my PC?
-
My Macbook Pro keeps crashing and it gets very hot, what should I do?
I have a late 2010 15inch Macbook Pro. Specs: 2.53GHz Intel Core i5 4GB 1067 MHz DDR3 500 GB HD My mac keeps freezing and crashing on me. It might be because it gets really hot, but I really cant say for sure. Its been running slow the past few month
-
Regd:Error in Output determination for Delievry document
Hi, we have set the output determination ~ Condition record for Ship-to-party Partner function for the delivery document. The condn is set by using LAVA as the Output type and when we save the delivery doc, output is not getting triggered and when we
-
How to use PXIe-5673e to continously generate dual-tone waveform?
Hi, everyone! I want to use PXIe-5673e to continously generate dual-tone waveform, and I have see some examples of RFSG, but I still don't know which one to use, can someone help me? Thank you very much!!
-
How to use progressbar with another process ?
Hi guys, i am working on an audio processing project in which i want to implement progressbar.I have two separate classes in which one contains code for GUI and another contains code for the logic when some event occurs in GUI. I have process button