WLS started as NT service: javai.dll not found

Hi,
I have just installed WLS 5.1 SP8 as NT Service. After trying to start the
service from the console I get the message "The dynamic link library
javai.dll could not be found in the specified path ...".
But the WLS seems to work anyway (what I have tested so far).
I do not get this error if I start the WLS from the command line.
I checked on another machine and found the javai.dll in the jdk 1.1.8 bin
directory but I installed the JDK 1.3.0 on the new machine.
Does anybody else experienced this before?
Do I need to install the JDK 1.1.8?
Any feedback is very appreciated.
Thanks in advance,
Fleming Frese

In the unzipped SP8, there is sub-directory win32_12 under bin, which has
WLService.exe and some other files, copy them to your <wl-home>/bin
directory and try it again.
"Fleming Frese" <[email protected]> wrote in message
news:3a838fcb$[email protected]..
Michael,
Thanks for this information.
Does this mean, that WLS 5.1 SP9 kann run with JDK1.3, especially as NT
service then?
I interpreted the information in the "WebLogic Platform Support Summary"
website
(http://www.weblogic.com/platforms/index.html#winnt)
as if JDK 1.3 is generally not recommended to use with WLS 5.1.
I just want to sort out if we should wait for SP 9 or if we shut restrict
our development on JDK 1.2.2.
Thanks for any comments and recommendation
Fleming
Michael Girdley <----> wrote in message
news:3a80ff93$[email protected]..
This is a bug to be fixed in SP9.
Bug #: CR031853
Thanks,
Michael
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Fleming Frese" <[email protected]> wrote in message
news:3a7ff4f3$[email protected]..
Hi,
I have just installed WLS 5.1 SP8 as NT Service. After trying to start
the
service from the console I get the message "The dynamic link library
javai.dll could not be found in the specified path ...".
But the WLS seems to work anyway (what I have tested so far).
I do not get this error if I start the WLS from the command line.
I checked on another machine and found the javai.dll in the jdk 1.1.8bin
directory but I installed the JDK 1.3.0 on the new machine.
Does anybody else experienced this before?
Do I need to install the JDK 1.1.8?
Any feedback is very appreciated.
Thanks in advance,
Fleming Frese

Similar Messages

I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

Hello Don,
Thank you for the details of the issue you are experiencing with iTunes. I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described. The following article has steps to do this(it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
I recommend continuing with these articles if you continue to experience issues with iTunes:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error in starting the service Oracle CSService not found

Hi all,
i am trying to install Oracle Enterprise manager grid control,
i am getting the following error message
"error in starting the service Oracle CSService not found"
when i checked in the "services.msc" the Oracle CSService is not started, so i tried to start the service, but its not starting and giving the error message as "error 3 system cannot find the path specified"
then i checked in the service properties, and the path is pointing to a different directory,
now i want to change this path to the correct oracle bin directory.
any views how to cnage/update this path in the services.msc, for "Oracle CSService"
Thanks alot.

Hi
i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
Thanks to all the viewers.

Installing update resulted in error message MS VCR80.dll not found, Apple mobile device failed to start

Can you help with error message on installing itunes on Windows XP: error message MSVCR80.dll not found. Apple Mobile Device failed to start. Error 7 Windows error 126.
Deleting itunes and reinstalling does not fix it.

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

TS3212 I had to re download Itunes, i get 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126"

iTunes will now download because of 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126" using microsoft.

Click here and follow the instructions.
(98918)

Tecra M9 - TPSMain.exe cannot start because CpePerf.dll not found

Hi and help,
have searched the web and found other forum threads with similar issues.
Tried all the suggestions to no avail. I am not great on the computer but can find my way around. Anyway....
After login messge following messages pop up in succession, along the lines of : TPSMain.exe cannot start because CpePerf.dll not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found
Computer works fine but Power Saver does not auto start and neither can i select it to from control panel.."toshiba power saver is not running",
so select it from Power options..."failed to start as CpuPerf.dll is not running"
Did all the searching on net and followed all advice... i.e. unistall power saver in safe mode, unistall toshiba common utilities neither can unistall fatal error 0x7e
So download Ccleaner, run checks, unistall with Ccleaner same fatal error.
Been on Toshiba support and tried to install Power Saver......same problem won't install .
So help help help if possible.
Computer is working fine but messages popping up are annoying and i would love power saver to prolong battery.
Tried system restore, though i doubt this affects the files...another problem "system restore could not complete"...tried this several times and cannot system restore either....what is going on???????
any help please
Tim

Cheers for the advice Andrei,
so you suggest there is nothing i can do other than restore from Toshiba recovery disc. Do you think somebody with a bit more knowledge could do sort it out with a less drastic approach..i.e is it worth taking it into a shop? Or do you think they will just have to go down the same route?
If i follow your plan is it just a simple case of downloading all my docs, photos, bookmarks to an external hd and then inserting the recovery disc and following intructions.?? I guess this disc then formats the HD and then reinstalls all the components the laptop came with??? is it infact a drastic approach, or quite simple as a procedure...what do i stand to looose?
Also how do i save xp as this is a version i installed when working/ using my laptop for my previous employer and i no longer have access to the discs/product key.
also could you confirm if this procedure would sort out system restore. I have tried restoring again to several restore points and the procedure will not complete, so this function is definitely not working anymore.
Sorry for more questions but as you can see this is not familair territory for me!!
many many thanks
Tim

Updated to current version and it won't start up. sqlite3.dll not found. Try to reinstall. I have tried many times unsuccessfully. What is the fix?

A pop-up told me to update to the current version. I did. Installation completes successfully. When I try to run the program, open a browser window after installation, I get an error that says sqlite3.dll not found, try to reinstall the program. I have tried uninstalling and reinstalling about a dozen times over the last few days, and I always get the same error.

Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.

Getting a error message when i try to open up i tunes file msvcr80.dll not found. I have tried to reinstall i tunes still wont work. Any ideas?

getting a error message when i try to open i tunes, file msvcr80.dll not found. Have tried to reinstall i tunes but receive another error message when thats done down loading it reads service apple mobil device failed to start, verify that you have sufficent priviliges to start system. Any ideas?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Downloaded latest version and now firefox won't open "mozjs.dll not found"?

I downloaded version of firefox (5.0?), and when the computer restarted firefox won't open. I get a "mozjs.dll not found".
Help?

'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart.

TS1717 Getting two error messages when trying to access I Tunes on my Windows 7 Computer: Windows Error 126 and MSVCR80.dll not found

Having difficulty accessing I Tunes on my Windows 7 Vista.
Error messages are two fold:
1. MSVCR80.dll not found. Reinstall may help correct prob.
2. Windows Error 126.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Itunes 10.5 doesn't open error: scarddlg.dll not found

updated to itunes 10.5 installation went fine, when I start the program ...SCARDDLG.DLL not found and itunes failed to open...
any help?
thanks

OMG i get the same thing !
i had itunes open all day then i updated it to the lastest thing then it just wouldnt open ever , ive uninstalled and reinstalled about 4 times and still nothing, i wont more music but i can't coz itunes won't open. why does it have to be so difficult ...

Shared Services database content not found in the specified database."

Trying to configure Version 11 and get the error: "Shared Services database content not found in the specified database". Relevant details on my issue as below:
- I'm running Windows 7 and SQL Server 2008 on my local machine.
- I did have a previous installation of Hyperion 9 on my machine which I uninstalled before installing 11. However, after uninstalling, I could still see the Hyperion EPM (empty folders) in my "All Programs", which I manually deleted.
- Now I've installed Essbase 11, and for now am trying to configure Hyperion Foundation only (Common Settings and Configure Database is greyed out, I checked deploy to applicaiton server. I left the calculation manager and workspace blank).
- The next window is the "Configure Shared Services and Database Registry" option. I chose "Perform 1st time Configuration of Shared Services Database". When I enter the relevant details, I got the error mentioned above. My error log file entries are as below:
(Jul 14, 2010, 02:10:50 PM), com.hyperion.hit.registry.Registry, ERROR, Exception when trying to store the component
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:546)
     at java.util.ArrayList.get(ArrayList.java:321)
     at com.hyperion.hit.registry.JDBCRegistryUtils.storeComponent(JDBCRegistryUtils.java:612)
     at com.hyperion.hit.registry.JDBCRegistryUtils.saveComponent(JDBCRegistryUtils.java:166)
     at com.hyperion.hit.registry.Registry.storeComponent(Registry.java:2749)
     at com.hyperion.hit.registry.Registry.getInstance(Registry.java:353)
     at com.hyperion.config.wizard.impl.RegistryWizardRule.validate(RegistryWizardRule.java:66)
     at com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel.queryEnter(WizardFormAdapterPanel.java:80)
     at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(SwingWizardUI.java:842)
     at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)
(Jul 14, 2010, 02:11:08 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Shared Services database content not found in the specified database.
(Jul 14, 2010, 02:11:58 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Shared Services database content not found in the specified database.
I believe version 11 supports Windows 7, but correct me if I'm wrong. What's going on here? Any suggestions on what I should try ?

Actually when I installed version 9, I never got around to configuring shared services and so never had a shared services database in SQL Server to begin with.
One question about the registry entry you told me to delete: The (HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions) which currently exists would be the entry for version 11 which I have installed right? It's the only entry for Hyperion Solutions in the registry.
After uninstalling versino 9, C:/hyperion still existed on my machine (though it didnt have all the subfolders which it did prior to uninstalling), so I manually deleted it before installing verison 11.
I wouldn't mind installing it on a compatible version of windows, but the thing is that at this point this is all that is available to me.
and I don't have any other oracle products.
thanks....

When I try to open iTunes from my PC, I get a message "aps daemon.exe MSVCR80.dll not found reinstall"

When I try to open iTunes from my PC, I get a message "aps daemon.exe MSVCR80.dll not found reinstall"
I have redownloaded iTunes and still get the same message. It has to do with my Windows Vista in some way? I cannot sync my iPad2, iOS 7.0.4 with my PC.
Can anyone help me? I don't want to lose the thousand and one things I've bought.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

WLS started as NT service: javai.dll not found

Similar Messages

Maybe you are looking for