Wls upgrade from sp2 to sp3 on AIX

When I update my wls610sp2 to sp3 on AIX,but failure.the error message is:/bea/wls61/lib/aix/libmuxer.so(text
file busy).I had shutdown my wls first,why?and how can I free the resource?perhaps
reboot machine can reslove it,but can not.
thanks a lot.

I also got the same problem.... reboot and fuser -u still not
working... always fail because of libmuxer.so... please help
Thanks
David
"sam_cao" <[email protected]> wrote:
>
When I update my wls610sp2 to sp3 on AIX,but failure.the error message
is:/bea/wls61/lib/aix/libmuxer.so(text
file busy).I had shutdown my wls first,why?and how can I free the resource?perhaps
reboot machine can reslove it,but can not.
thanks a lot.

Similar Messages

Weblogic 6.1 server upgrade from SP2 to SP3

Hi All
We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
But that installable seems to over-write the previous weblogic server & installs
the server afresh. Is there any patch kinda thing available which allows me to
upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
thanks in advance
-Kiran Rane

Upgrade installer from SP2 to SP3 is only available for paid BEA
customers. You need a login at http://support.bea.com
Kumar
kiran rane wrote:
Hi All
We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
But that installable seems to over-write the previous weblogic server & installs
the server afresh. Is there any patch kinda thing available which allows me to
upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
thanks in advance
-Kiran Rane

Significant performance reduction from SP2 to SP3

We have noticed a significant increase in CPU utilization when going from weblogic
6.1 SP2 to SP3. In our testbed we noticed a CPU increase of more than 10% with
all other factors equal.
Have anyone else noticed a similar performance degration when shifting service
packs?

Unfortunately, yes.
In the effort of gaining every little bit of performance out of available resources,
we decided to test upgrading the service packs of WLS 6.1 sp1 and WLP (portal)
4.0 sp1 to sp3 and sp2, respectively.
We also saw roughly 10% performance degradation. So we stayed with sp1/sp1.
"Espen Tjonneland" <[email protected]> wrote:
>
We have noticed a significant increase in CPU utilization when going
from weblogic
6.1 SP2 to SP3. In our testbed we noticed a CPU increase of more than
10% with
all other factors equal.
Have anyone else noticed a similar performance degration when shifting
service
packs?

Migration from Sp2 to Sp3

I upgraded weblogic sp2 to Weblogic sp3 in Solaris environment.When i restart the server, all the components are getting deployed and the server listens to the correct port but immediately the shutdown begin and the server undeploys all the components and shuts down.What might be the cause of the problem ?
Thanks
Vishnu

Vishnu,
You need to check your logs for errors by setting logging to Info and debug to
stdout.
Most likely, the IP and/or port your are starting WLS with is already in use by
another process.
Do a netstat -na | grep <port # for WLS>
Regards
Mayur
Vishnu <[email protected]> wrote:
I upgraded weblogic sp2 to Weblogic sp3 in Solaris environment.When i
restart the server, all the components are getting deployed and the
server listens to the correct port but immediately the shutdown begin
and the server undeploys all the components and shuts down.What might
be the cause of the problem ?
Thanks
Vishnu

Difference between WLS 6.1 SP2 and SP3

I have recently tested my application in WLS 6.1 SP3 (who work normally in WLS
6.1 SP2) , I have problem with my jsp page for merging a jsp in another
What need I do to correct it ?

Steven,
The CGIServlet for WebLogic will not run a CGI that doesn't have an extension.
Just add and extension to your executable and it should run fine.
jeff
"Steven" <[email protected]> wrote:
Hi all,
I am currently facing a problem with CGI binaries via CGIServlet on WLS
6.1
sp4. The web.xml file has been configured correctly as follows:
-------- start of web.xml -----------
<servlet>
<servlet-name>CGIServlet</servlet-name>
<servlet-class>weblogic.servlet.CGIServlet</servlet-class>
<init-param>
<param-name>cgiDir</param-name>
<param-value>/web/bea6.1sp2/wlserver6.1/config/ngwapp/applications/NGWWebApp
/cgi-bin</param-value>
</init-param>
<init-param>
<param-name>*.pl</param-name>
<param-value>/web/perl5/bin/perl5.00405</param-value>
</init-param>
<init-param>
<param-name>*.cgi</param-name>
<param-value>/web/perl5/bin/perl5.00405</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>CGIServlet</servlet-name>
<url-pattern>/cgi-bin/*</url-pattern>
</servlet-mapping>-------- end of web.xml ---------
When a call is made to http://.../cgi-bin/dialogserver , this results
in a
404-File Not Found error.
The contents of the cgi-bin directory have not been altered and I did
not
face this problem earlier when I was using sp2.
It only happened after I upgraded to sp4. Can anyone help?
best rgds,
steven.

Exchange 2010 SP1 Upgrade to SP2 and SP3. Choose language.

Hello.
I going to install Exchange 2010 SP1 multilanguage and then update to SP2 and SP3
But then i download SP2 from Microsoft it's ask fоr choose language.
It ask about installer language or about Exchange language?
What language i need to choose if i have multilanguage Exchange SP1 installer?
And if i want to Exchange EMC be in English and Outlook on client machine shows Russian what language i need to choose when install first role from Exchange 2010 SP1 multilang DVD?

Exchange EMC language depends on OS version where you are running it.
Besides about client language you have to choose Russian language pack during install. More info below...
The language of the Outlook user interface that an Outlook user sees, including the content generated by Exchange, depends on the following:
The language the user is using in Outlook
Whether the language they're using in Outlook is supported by Exchange 2010
Whether the language they're using in Outlook has been configured to be available on the Exchange 2010 server
Consider the following scenarios:
When an Outlook user who's set their language to <Language A> signs in to their Exchange 2010 mailbox and both Outlook and Exchange 2010 support the language the user has specified, <Language A>, the user will see all messages and Exchange-generated
mailbox components, for example, the Inbox, in Language A.
When an Outlook user who's set their language to <Language A> signs in to their Exchange 2010 mailbox that's been set to <Language B>, the Outlook user will see the Outlook user interface in Language A, but will see the content generated
by Exchange. For example, by default, folder names such as Inbox,
Deleted Items, and Sent Items display in <Language B>.
You can change the Exchange mailbox language setting on the server using Exchange Management Console or the Exchange Management Shell. For information about how to use the Shell to change the language setting for a mailbox on a server, see
Set-MailboxRegionalConfiguration.
From: Client Language Support for Outlook -
http://technet.microsoft.com/en-us/library/dd638175%28v=exchg.141%29.aspx
Blog |
Get Your Exchange Powershell Tip of the Day from here

Upgrade Exchange 2010 from SP2 to SP3 RU4

Hi All,
We are planning to upgarde Exchange 2010 SP2 servers with stretched dag across 2 AD sites to SP3 RU4.
I have few questions.
1. We are planning to Upgrade HUB/CAS servers in both the sites in first week.
2. Then we are planning to upgrade mailbox servers in the next week in both sites.
3.
Do you think this is a good approach. Can some one please share best pratices document as we are using F5 load balancing.

Hi,
Vishwanath's suggestions are pretty helpful. Besides that, we should make sure that the update process should be managed to prevent all of the DAG members from being offline at the same time.
Here is an article about how to install Update Rollups on Database Availability Group Members for your reference.
Installing Update Rollups on Database Availability Group Members
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Upgraded from ZFD3.2 SP3 - ZFD 6.5 SP1, can't store inventory

I've recently upgraded my test server from ZFD 3.2 SP3 running on Netware
OES (NW 6.5.3 w/eDir 8.7.3.5). Everything appears to be working except
inventory. When it goes to store the .STR file, it give the following
error - Storer: started storing ....
Error in parsing xxxx.str due to other exception.
Storer: Full scan will be initiated.
We have tried it from a XP SP1 workstation running Novell Client 4.90 SP2
and from a workstion with both Novell Client 4.90 SP2 and the ZFD Mgmt
Agent. Both give the same results.
Have recreated the workstation inventory policy and deleted all workstation
objects. Newly imported workstations still give the error.
Inventory is not getting stored in the database. Any ideas?
Kathy

dmvkrn,
> error - Storer: started storing ....
> Error in parsing xxxx.str due to other exception.
> Storer: Full scan will be initiated.
can you post a large portion of the log file?
Jared
Novell Support Forums SysOp
Systems Analyst with Data Technique, INC.
Using XanaNews 1.16.5.2 as a News Reader
Novell eDirectory Services 1.6 Billion users worldwide
81% 0f Fortune 500 use Novell's eDirectory
Novell Desktop Management 40 Million users worldwide

WindowsPowerShell removal to upgrade from Windows XP SP3 to Windows Vista Business

I see five suggestions, but I'd like to give you more information first. I have Windows XP Home Edition w/SP3. I'm trying to upgrade to Windows Vista Business Edition. When attempting to do this, i get a message that, in essence says that I need to remove
WindowsPowerShell. I believe that I have v1 installed. I can't remove it from Control Panel, its not listed, and yes, I have the updates box checked. There was a posting on another forum that said to try and remove it from PowerShell. I followed those instructions
and this is the result:
PS C:\WINDOWS\system32\WindowsPowerShell\v1.0> get-hotfix -id KB926139 Get-HotFix : This command cannot find hot-fix on the machine 'localhost'.
Verify the input and Run your command again.
At line:1 char:11
+ get-hotfix <<<< -id KB926139
+ CategoryInfo : ObjectNotFound: (:) [Get-HotFix], ArgumentException
+ FullyQualifiedErrorId : GetHotFixNoEntriesFound,Microsoft.PowerShell.Commands.GetHotFixCommand
PS C:\WINDOWS\system32\WindowsPowerShell\v1.0>
I understand that WPS may have been installed as part of a Service Pack, and that's why the KB926139 became involved. After going through all of the Programs and Updates in Add/Remove Programs, I did not find either WindowsPowerShell or KB926139. I did go
into the registry, and found it there, and obviously, it must be installed because I used the WPS command line to obtain the information in bold print. Does anyone have suggestions/ideas on how I
can uninstall WindowsPowerShell so that I can upgrade to Vista?

I'd ask them over here.
Windows
Vista Upgrade forum on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Upgrading from SP1 to SP3, Exchange 2007

Hi,
I am preparing for an Exchange 2007 staged migration to Office 365. After email migration is complete I will be taking my Exchange server offline. I am presently running Exchange 2007 SP1. I need to download and apply Service Pack
3 before I begin migrating. Thus far I have been unable to find a download for SP3 only. I am aware that I can download the full version of Exchange 2007 SP3 but I am looking for SP3 only. Any information would be greatly appreciated.
Thanks.

Hi,
Based on my experience , every Exchange update package includes the whole Exchange server. And when we install the package, it will automatically check and install the updated features. And you can refer to the above articles that others have provided.
Thanks,
Angela Shi
TechNet Community Support

Exchange 2010 SP2 to SP3 upgrade fails on Client Access Role

Hello,
I have searched everywhere and cannot find any answer to my problem. We have 1 Exchange server with all 3 roles installed and during the upgrade from SP2 to SP3 the server fails during the Client Access Role with the following error:
Error:
The following error was generated when "$error.Clear();
          Get-ClientAccessServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
        " was run: "Invalid URI: The format of the URI could not be determined.".
Invalid URI: The format of the URI could not be determined.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp
here is more info from the ExchangeSetupLogs
[10/09/2014 09:26:07.0463] [1] Executing:
          Get-ClientAccessServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
[10/09/2014 09:26:07.0463] [2] Active Directory session settings for 'Get-ClientAccessServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'ADROOT.DOMAIN.local', Preferred Global Catalog: 'ADROOT.DOMAIN.local', Preferred Domain Controllers:
'{ ADROOT.DOMAIN.local }'
[10/09/2014 09:26:07.0463] [2] Beginning processing Get-ClientAccessServer -Identity:'EXCH2010.DOMAIN.local'
[10/09/2014 09:26:07.0463] [2] Active Directory session settings for 'Add-ADPermission' are: View Entire Forest: 'True', Configuration Domain Controller: 'ADROOT.DOMAIN.local', Preferred Global Catalog: 'ADROOT.tioh.local', Preferred Domain Controllers: '{
ADROOT.DOMAIN.local }'
[10/09/2014 09:26:07.0463] [2] Beginning processing Add-AdPermission -User:'S-1-5-20' -ExtendedRights:'Exchange Web Services Token Serialization'
[10/09/2014 09:26:07.0479] [2] Searching objects "EXCH2010.DOMAIN.local" of type "Server" under the root "$null".
[10/09/2014 09:26:07.0479] [2] Previous operation run on domain controller 'ADROOT.DOMAIN.local'.
[10/09/2014 09:26:07.0479] [2] Previous operation run on domain controller 'ADROOT.DOMAIN.local'.
[10/09/2014 09:26:07.0479] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[10/09/2014 09:26:07.0510] [2] [WARNING] An unexpected error has occurred and a Watson dump is being generated: Invalid URI: The format of the URI could not be determined.
[10/09/2014 09:26:07.0526] [2] [ERROR] Invalid URI: The format of the URI could not be determined.
The article it references doesn't exist and I cannot find anything related to this error searching the web.
Please help!
NJV

Hi NJv7300
Thank you for your question.
By your state, I know you get error when you use Get_ClientAccessServer. I think it caused by AutoDiscover, you can check it.
You can refer to the following link:http://www.shudnow.net/?s=autodiscoverserviceinternaluri
You can refer to the following steps:1.
1. Using LDP, locate the following container:
CN=<SERVERNAME>,CN=Autodiscover,CN=Protocols,CN=<SERVERNAME>,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=<ORGNAME>,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=<DOMAIN>,DC=<TLD>
2. Double-click the <SERVERNAME> under Autodiscover and look for the "serviceBindingInformation" value:serviceBindingInformation (2): AutoDiscover.Corp.HMSA.com;
https://honmail.corp.hmsa.com/autodiscover/autodiscover.xml;
serviceClassName: ms-Exchange-AutoDiscover-Service;The proper format for the Autodiscover URI is
https://serverfqdn/Autodiscover/Autodiscover.xml
3. Ran Set-ClientAccessServer -Identity HON10343 -AutodiscoverServiceInternalUri
https://honmail.corp.hmsa.com/autodiscover/autodiscover.xml
4. Ran Get-ClientAccessServer, but received an error after HON10343 was enumerated.
5. Next, did another Set-ClientAccessServer on HON10344.
6. Finally, ran Get-ClientAccessServer and enumerated all CAS servers in the org without error.
7. Tested opening EMC on both Exchange 2007 and 2010 and were able to successfully expand the Server Configuration for every role and enumerate all servers.
If any questions, please let me know.
Best Regard,
Jim Xu

Upgrading WL6.1 SP2 to SP3

hi all
i would like to know what is the ways of upgrading the WL from SP2 to SP3
i have installed WL6.1 SP2 on my solaris station and i want to upgrade it to SP3
is there a way of upgrading rather then installing new WL.
thanks in advance
shlomit

Shlomit <[email protected]> wrote:
i have installed WL6.1 SP2 on my solaris station and i want to upgrade it to SP3.
Is there a way of upgrading rather than installing new WL? Shlomit,
Sure. Go to bea.com, download service pack 3, install as follows:
$ /opt/bea/jdk131/bin/java -cp wls61sp3_upgrade_generic.zip install -i console
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
->1- English
CHOOSE LOCALE BY NUMBER: 1
===============================================================================
WebLogic Server 6.1 Service Pack 2 (created with InstallAnywhere by Zero G)
===============================================================================
Introduction
This installer will guide you through the installation of Service Pack 3 of
WebLogic Server 6.1. Use command "next" to proceed to the next screen. If you
want to change something in a previous screen, use command "previous" or
"back". You may quit the installer at any time by using the command the
"quit".
PRESS <ENTER> TO CONTINUE:
===============================================================================
Choose BEA Home Directory
1- /opt/bea
Existing BEA Home: 1
===============================================================================
Installing...
[==================|==================|==================|==================]
[------------------|------------------|------------------|------------------]
===============================================================================
Install Complete
Congratulations! The installation of Service Pack 3
for WebLogic Server 6.1 is complete.
The installer has saved copies of files which you may have modified to:
/opt/bea/wls/servicepacks/sp3/backup
Press "Enter" to quit the installer:
$
Then, to verify...
MBean reports:
WebLogic Server 6.1 SP3 (...etc...)
Let me know if you need more assistance.
Brian J. Mitchell
BEA Systems Administrator
TRX
Atlanta, GA
email: [email protected]
office: 404-327-7238
mobile: 678-283-6530

Exchange SP2 to SP3 RU7 upgrade and any know issues with the Dialogic Gateways

We are planning on upgrading out Exchange servers from SP2 to SP3 RU7. We are currently using an Avaya phone system and have Dialgoc gate2ways between these systems to allow us to get the voice mail into the end user's mailbox as a wav file. We are using
the DMG2120's with code many years old. Has anyone had any issues or know of anyone that has had issues?

Hi,
I have checked the your question from our internal channel and did not find any related compatibility issues with the update. I also check the third-party forum but still cannot find any threads about any potential issues.
I think we can feel free to do the upgrade. If you would like to double confirm the question, you can also ask a question in Dialogic forum for more help:
http://www.dialogic.com/den/developer_forums/f/default.aspx
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Additionally, there is an article about the IP gateway partners, AudioCodes and Dialogic, to add to the list of PBXs that are tested
by Microsoft currently:
http://technet.microsoft.com/en-us/library/ee681657(v=exchg.141).aspx
Regards,
Winnie Liang
TechNet Community Support

Upgrading WLS 8.1 SP2 to SP5: does SSL setup need to be re-done?

All,
Our production application has been built using Workshop 8.1 SP2, and is deployed on a WLS 8.1 SP2. We are now wanting to upgrade to SP5, and so I used the "Smart Update" utility to upgrade my local instance to SP5. Our application is accessed over SSL, so I was wondering if the whole SSL-setup that was done when we setup our production SP2 environment a year ago needs to be re-done? Our application has a web module, two java projects, uses SSL-based web-services and has a custom Oracle JAAS login module. I already found out that there is a particular setting on the domain that has changed between SP2 and SP5 that allows anonymous lookup of MBeans(Anonymous Admin Lookup Enabled). Are there any other such settings/considerations i need to be aware of in moving from SP2 to SP5?
All help is appreciated..it will help me decide on moving to SP5.
Thanks in advance!
Vik.

Hi Vik
When you use smartupdate to upgrade from sp2 to sp5, it will upgrade only the weblogic workshop instance and not the domains.
Either you will have to upgrade the existing sp2 domain to sp5 or create a new sp5 domain and configure it just like sp2.
After the upgrade open the config.xml under the new domain and check the SSL config under the server just to make sure.As far as the SSL config is concerned it did not change from sp2 to sp5.
More information on this is available at
http://e-docs.bea.com/platform/docs81/upgrade/faq.html
Thanks
Vimala

Exchange 2010 SP2 to SP3 upgrade question regarding Forefront

When doing an upgrade from 2010SP2 to SP3 is it recommended stopping all exchange services manually before installing the update? I know there is a prereq of stopping forefront or you may have an issue with services starting. I have not run into
this issue in my test environment. I do not know if the SP3 install requires any checks of services to be running or not.
I have also notices on a cas/ht server with forefront installed, you can't stop forefront without shutting down the transport service. So is it best to just shut all services down first before doing the upgrade?

Hi,
Based on the article below, you can stop all Exchange services before you decide to install an Exchange service pack, if you really require this.
How to install a service pack or software update on an Exchange Server computer that is running Forefront Security or Forefront Protection
http://support.microsoft.com/kb/929080/en-us
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Wls upgrade from sp2 to sp3 on AIX

Similar Messages

Maybe you are looking for