Wls1033_oepe111150_win32.exe vs. server103_win32.exe
We're working on upgrading from weblogic 9.2 to 10.3. So far it's gone pretty smooth until this morning.
I notice in the wls1033_oepe111150_win32.exe install package, there was no workshop IDE present...weird. So I went on a search for the latest workshop. After installing workshop102_win32.exe I found it didn't recognize the 10.3 as a valid weblogic server.
Next I found server103_win32.exe, which contains the newest version of workshop (I assume 10.3 as well), but that installer (10.3.0.0) isn't 'compatible with the maintenance level of the product installed...(10.3.3.0).
So really, I just need to have weblogic 10.3 with the newest workshop as well. Do I nix the wls1033_oepe111150_win32.exe install, and go with server103_win32.exe? Are the weblogic server releases different?
Thanks to anyone that can lend a hand!
-Ben
Workshop product has been discontinued. The last version was for WLS 10.3.0. It will not work with newer WLS releases. You will need to switch to OEPE if you want to use newer releases such as 10.3.3.
- Konstantin
Similar Messages
-
Installation error in Oracle Web Center 11.1.1.3.0
Hi,
I have downloaded the ofm_wc_generic_11.1.1.3.0 from OTN.
I installed the WLServer successfully. While trying to install Oracle Web Center 11.1.1.3.0 I am getting the below error.
Do I need to install Web Center Suite 11.1.1.2.0?
Is there any sequence to install?
Please help me.
INST-07010: Validation of Oracle Home location failed. The location specified does not exist.
Enter a valid existing directory
INST-07286: Specified Oracle Middleware home location does not have version 10.3.3 of WebLogic server. If the version is incorrect then configuring with the Weblogic server will fail.
Provide a Oracle Middleware home location which contains WebLogic server with version 10.3.3.0 or upgrade the Weblogic server to 10.3.3.0 and restart the install.
INST-07100: The Oracle home provided does not contain Oracle WebCenter 11.1.1.2.0.
In order to patch your existing version please provide an Oracle home that contains the product mentioned above. If you choose to continue, only the oracle_common directory and any components that both products have in common will be patched.
INST-07293: Middleware home location specified does not have the required Oracle homes installed in it. The Oracle homes for the following components is not installed oracle.as.webcenter.top.
Provide a different Middleware home location or install the required Oracle Products and try the install again
Regards,
Venu--
Edited by: [email protected] on Sep 6, 2010 5:04 AMHi,
Thanks for reply.
I installed the latest WLServer from
http://download.oracle.com/otn/nt/middleware/11g/wls1033_oepe111150_win32.exe
Is this is the right one?
Regards,
Venu-- -
Problem installing Oracle forms and report in windows 7
I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.Solved, Thank you
-
SOA Suite 11Gr1 on 64 bit windows 2008 R2 server
Hi All,
Has anybody successfully installed and and ran SOA suite 11G on a windows server 2008 64bit?
I have managed to install the software but startWeblogic.cmd crashes after a few second and nothing is written to the log file, even
if I try to run the script as administrator.
I have looked at the certification matrix and only 32bit JVM is supported, but when installing, I pointed setup.exe to the JVM that came
with weblogic install, which is 32bit. I have recreated the domain twice already.
The client does not want linux/unix OS on their servers, so that's not an option.
This is what I have installed:
2010/07/07 08:43 PM 265 979 476 ofm_rcu_win_11.1.1.3.0_disk1_1of1.zip --- Failed to run rcu.bat
2010/08/02 08:08 PM 1 780 130 729 ofm_soa_generic_11.1.1.2.0_disk1_1of1.zip
2010/04/29 04:47 PM 1 988 720 972 ofm_soa_generic_11.1.1.3.0_disk1_1of1.zip
2006/02/24 05:41 AM 216 933 372 OracleXEUniv.exe
2010/10/06 01:24 PM 1 045 821 796 wls1033_oepe111150_win32.exe
The rcu.bat script failed to run from the server, so I ended up running it from my local machine, but the schema creation was successful.
Any ideas?It seems you have used 32bit installers on 64bit machine. Please refer -
http://anuj-dwivedi.blogspot.com/2010/10/installing-oracle-soa-and-bpm-111130.html
Regards,
Anuj -
What happened to Oracle Workshop for Weblogic?
I just installed a more recent version the Oracle OSB (wls1033_oepe111150_win32.exe) but i can't seem to find the Oracle Workshop for Weblogic anymore in this install. I do find the Oracle Enteprise Pack for Eclipe but when i open it there is no Oracle Service Bus perspective nor can i create a new Oracle Service Bus project. Do i have to install something more?
Here are the installation instructions for Oracle Service Bus 11.1.1.3.
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15017/before.htm#CHDHCJEC
Check section 3.4 for prerequisites on WebLogic Server and OEPE versions.
thanks,
greg -
Hi,
I'm trying to start soa_server1 and everything starts fine, except soa_infra. I'm using following version of software
Database: win32_11gR2_database_1of2.zip
win32_11gR2_database_2of2.zip
RCU: ofm_rcu_win32_11.1.1.3.3_disk1_1of1.zip
Weblogic: wls1033_oepe111150_win32.exe
SOA Generic: ofm_soa_generic_11.1.1.2.0_disk1_1of1.zip
ofm_soa_generic_11.1.1.3.0_disk1_1of1.zip
JDev: jdevstudio11113install.exe
SOA Extension: soa-jdev-extension.zip
Operating system WinXP 32 bit with SP2
I've set the StartScriptEnabled=true in nodemanager.properties, but still no luck.
I'm getting following error
weblogic.application.ModuleException: Exception preparing module: EJBModule(oracle.bpm.runtime.bpmn-engine-ejb.jar)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
Error processing annotations: .
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:467)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1221)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: weblogic.utils.ErrorCollectionException:
There are 1 nested errors:
weblogic.j2ee.dd.xml.AnnotationProcessException: [EJB:015001]Unable to link class oracle.bpm.bpmn.engine.ejb.impl.BPMNInstanceManagerBean in Jar E:\Oracle\Middleware\user_projects\domains\wldomain\servers\soa_server1\tmp\_WL_user\soa-infra\ztorh\oracle.bpm.runtime.bpmn-engine-ejb.jar : java.lang.NoClassDefFoundError: oracle/bpm/bpmn/engine/service/ejb/interfaces/IBPMNCubeInstanceManagerLocalBean
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addProcessingError(BaseJ2eeAnnotationProcessor.java:1323)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addFatalProcessingError(BaseJ2eeAnnotationProcessor.java:1328)
at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.processAnnotations(EjbAnnotationProcessor.java:156)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.processStandardAnnotations(EjbDescriptorReaderImpl.java:344)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:204)
at weblogic.ejb.spi.EjbDescriptorFactory.createReadOnlyDescriptorFromJarFile(EjbDescriptorFactory.java:93)
at weblogic.ejb.container.deployer.EJBModule.loadEJBDescriptor(EJBModule.java:1242)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:395)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1221)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I've tried to look for the class file in the jar, but didn't find any. But the strange thing is, i had checked the same jar file in another machine where the SOA_INFRA is starting fine, and still there is no such class file available. This put's me in jeopardy to decide if this is an installation issue or configuration issue.
Any help would be highly appreciated.
Much Thanks,
KrishnaHello Krishna,
Don't you see BPM version after running this script. On my system output is like -
D:\OFMW11g\mw\Oracle_SOA\bin>soaversion.cmd
Oracle SOA Server version 11.1.1.3.0
Build: 0
Build time: Thu Apr 15 22:20:11 PDT 2010
Build type: release
Source tag: PCBPEL_11.1.1.3.0_GENERIC_100415.2045.2557
Oracle BAM Source Tag:ORABAM_11.1.1.3.0_GENERIC_100406.2108
Oracle BPM Source Tag: BPM_11.1.1.3.0_GENERIC_100415.1757.0684
Have you selected "Oracle BPM Suite" while creating the domain? Can you try to extend your domain to include "Oracle BPM Suite" in it and try restarting the servers?
Regards,
Anuj -
Error configuration forms 11.1.1 : Creating WEbLogic domain fails
I am trying installing Oracle Forms and Reports on Windows XP pro with an Oracle 10G database but cannot get it done.
This is what I did:
- Installed WebLogic Server 11 gR1 (from wls1033_oepe111150_win32.exe)
- Installed Oracle Fusion Middelware (without configuration) 11g Release 1 (11.1.1) - from ofm_pfrd_win_11.1.1.2.0_32_disk_1 til _4_1of1.zip
- Installed Oracle Fusion Middelware (without configuration) 11g Release 1 (11.1.1) Patch Set 2 (11.1.1.3.0) - from ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1.zip
- Started the Node Manager
- Stated the Classic-Instance configuration
I tried again and again but the cofiguration always gives the error that it cannot create a domain.
The tail of the log files shows:
[2010-11-25T17:25:34.687+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 14] [ecid: 0000Im3q^J2EwG1prsd9iY1CvcnO000005,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
The out file gives:
Executing Task: Domain wird erstellt
XXX: adding task: oracle.as.install.classic.ca.standard.DomainProvisioningTask
AdminServer port is 7001
trying to connect to stefan 7001
Creating Weblogic Domain.
isPortAvailable [port 5556]
Port 5556 not available.
oracle.as.provisioning.exception.ASProvWorkflowException
at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2623)
at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2469)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
progress in calculate progress4
progress in calculate progress4
I found some posts in the forums but could't really get anything out of them.
Thanks for any help, ChrisChris wrote:
I am trying installing Oracle Forms and Reports on Windows XP pro with an Oracle 10G database but cannot get it done.
This is what I did:
- Installed WebLogic Server 11 gR1 (from wls1033_oepe111150_win32.exe)
- Installed Oracle Fusion Middelware (without configuration) 11g Release 1 (11.1.1) - from ofm_pfrd_win_11.1.1.2.0_32_disk_1 til _4_1of1.zip
- Installed Oracle Fusion Middelware (without configuration) 11g Release 1 (11.1.1) Patch Set 2 (11.1.1.3.0) - from ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1.zip
- Started the Node Manager
- Stated the Classic-Instance configurationYou dont have to start the Node manager.
Also since you are installing on XP deselect system components .. Try again
I tried again and again but the cofiguration always gives the error that it cannot create a domain.
The tail of the log files shows:
[2010-11-25T17:25:34.687+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 14] [ecid: 0000Im3q^J2EwG1prsd9iY1CvcnO000005,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
The out file gives:
Executing Task: Domain wird erstellt
XXX: adding task: oracle.as.install.classic.ca.standard.DomainProvisioningTask
AdminServer port is 7001
trying to connect to stefan 7001
Creating Weblogic Domain.
isPortAvailable [port 5556]
Port 5556 not available.
oracle.as.provisioning.exception.ASProvWorkflowException
at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2623)
at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2469)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
progress in calculate progress4
progress in calculate progress4
I found some posts in the forums but could't really get anything out of them.
Thanks for any help, Chris -
Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7ba58
Exception Code: c0000005
Exception Offset: 0002e3fb
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button. -
My itunes wont open and i cannot find an itunes .exe file
my itunes wont open and i cannot find an itunes .exe file
I have this same problem and when I go to the control panel to uninstall itunes, I can't do that either. I have been trying to uninstall so I can reinstall. Hopefully someone has an idea.
-
Hello,
I am using LV 8.6.1 with the 1.13 report generation toolkit and I am having problems getting my built exe to work. I am trying to open an excel template and populate it with new data. I have broke the vi down to just opening excel - opening the template and then fill in some data. But at this point excel does not open at all. And naturally everything works fine in the development environment.
Error Code: -2147352573
Member not found in NI_ReportgenerationToolkit.lvlib:
Excel_open_workbook.vi
NI_Excel.lvclass: new reportsubvi.vi
I read a few help pages that said to add \vi.lib\utility\NIreport.llb and LVclass directories to the project folder and add them to the always include section of the build. But no luck so far.
Side question: The machine I want to use this on has 8.6.1 Full which does not have the extra excel functions that my developer has. Is there a way to install the DEV report generation toolkit in the full version? Then I would not need to build an exe.
UPDATE: I just tried the exe on a different machine that has a developer suite installed and it worked fine. So I guess I need to find out what else I need to add to the build to make it work.
Message Edited by _Bryan on 06-16-2010 11:58 AM
Solved!
Go to Solution.There should be some info on this in the KB.
But first you should make sure that your version of the report generation toolkit actually supports excel 2000 (which is 10 years old)
That should be in the release notes of the toolkit
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
Report Generation Toolkit error when running exe not vi
Unknown System Error in Get Report Settings.vi->Get Current Font.vi->Excel Easy Table (str).vi->insert table and save file.vi->80x test suite.vi
1. The above is an error I get from my exe
2. I do not get this error when just running the vi.
3. On several report gen functions cohersion dots are on my refnum input. Is this the cause of my problem with the exe?
I guess there is an another learning curve when dealing with the app builder.
Any suggestions would be appreciated.
Thanks
Brian
CLAD
Brianforget what i wrote. it was my vi.
funny, most of the time it aint LabVIEW causing the problem but the program itself.
Brian -
Report generation toolkit VI error when running EXE
A VI inside the Report Generation Toolkit (version 1.1.2), Excel Find Application Directory.vi, will not function correctly when running an EXE. The "Current VI's path" block will return the path of the currently running EXE rather than the path of the Excel Find Application Directory VI. (The same would be true for Word Find Application Directory.vi.)
-Joel
Solved!
Go to Solution.Have you had a look at this knowledgebase article? The error is caused due to the exclusion of any dynamic VI.
Ipshita C.
National Instruments
Applications Engineer -
How do I perform an Open VI Ref for a VI in my EXE?
Good evening,
I'm building a LV8.5 VI into an EXE using application builder. I am trying to get a reference to a SubVI using Open VI Reference. When I wire the subvi name as a string, I get an Error 1004 failure and the dialog says "the VI is not in memory".
I also tried the Open VI Reference by wiring a path that includes the EXE name prepended C:\MyApp\MyEXE.exe\MyVI.vi
When I tried this I got an Error 7 for File not Found
Does anyone know the proper way to include a SubVI in an EXE to be accessed later with Open VI Reference? I'm not certain if my VI that I'm loading dynamically was actually included in my EXE or if I'm providing the correct location for Open VI Reference.
Any advice or examples is appreciated. I'm using LV8.5 with the application builder.
Thanks,
Chris Norris
Embla Systems, Inc.This definately sounds like you have not placed your vi into your executable. When you dynamically call a vi, it is not included automatically into the exe. You have to add it as a support file. There is a window in the exe builder where at the top left you select your "top level vi" then below that your "support vis" Make sure that the vi you are trying to call is included in the support vi list.
If you are always calling the same vi, even multiple times, there is a way to get the path without as much bother. Create a static reference to your vi. It is a little icon into which you place your vi on the diagram. Pull the reference from this, then use the properties vi to get the path. Open your vi reference using this path. Do not use the static reference to do things to the vi, as this can cause problems for you, especially if close the calling vi.
Good luck,
CyberTazer
Software Systems Engineer -
LabView Exe Application file not launch Excel application for report generation
Dear All,
I created one LabVIEW application file for report generation (using Excel Template).
While I run the program in programming mode it works well and create the report file in the specified path.
After creation of the application file(exe), it gives the correct path of where the excel template is placed. The same path is given to New Report.vi, but it gives the error 'File Not Found'.
Tell me, is any other configuration required for generating Excel reports? (During exe application mode)
Give me the solution.
Thank You
Jegan.Hello,
Most likely you are encountering a problem of stripping and/or building paths. Probably the easiest thing to do is put a couple indicators on your front panel for the path or paths you care about, build your exe, and make sure you are really using the path you'd like. If you always put the report at some deterministic place relative to the exe (that is, even it the exe is moved, it will go with the exe and remain in the same relative path location, then you can use the Current VIs Path funtion found in the ... File I/O -> File Constants palette as a start path (where you will want to strip at least the exe name off of course).
I think this will bring some clarity to the issue!
Best Regards,
JLS
Best,
JLS
Sixclear -
Error while running sawserver.exe file
Hi All ,
I installed OBIEE 11.1.5 in my machine and Database is in different machine (For RCU) .OBIEE reports are working fine but, I tried to run sawserver.exe file to register new instanceconfig file to implement multiple rpds and Catalogs in OBIEE 11G by referring the below link.
http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/
Command that I used is : sawserver.exe -c D:\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfigdemo.xml
Am getting the Error : the procedure entry point long jmp count not be located in the dynamic link library orauts.dll
Thanks in Advance .Hi,
How can i do it in OBIEE 11G? Any help will be grateful
Regards,
Joni
Maybe you are looking for
-
Why is my IBM Scroll button no longer working with the new Firefox?
I just downloaded the new Firefox onto my IBM ThinkPad. This laptop has a center button for the mouse that I have been able to use to scroll down webpages on the previous version of Firefox installed on my computer. However, with the new version it n
-
Whenever I launch firfox through non admin login, I get an alert message.
Whenever I open firefox through non admin login, I get following alert message. "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this d
-
Installation WAS ABAP UC + WAS J2EE Add In..and XI
Hello everybody, Could anyone help me with this issue ?? I am going to install WAS ABAP and WAS J2EE Add in and after that do the XI installation. I am reading the installation guides and I have some doubts about "Hardware and SOft Requirements Secti
-
Quite a few banks encourage customers to install Trusteer Rapport in order to enhance online security. My wife and I have had very different experiences using it, and I uninstalled it in 2011. An Uninstall applet comes with the Rapport installation,
-
Ihave an old acount, idont remeber pasword. I made new one. But i still have a question for updates to write pasword on old one...in apple itunes store... I changed everywhere the new one...but it doesnt work. it started from new update...on ipad...