WLSE 1030 not responding after some time
Hi,
I have a wlse 1030 with 2.13.i have done all the configurations.after sometime itstopped responding to console access,ping etc.so,then i restarted after restarting again it working fine for some time.and then again the same problem is coming.what could be the problem.And while restarting it crashed two times then i recovered with the cd.
and it is not detectinf keyboard,mouse.some times it is detecting.
pls help me i am unable to resolve this from a long time.
regards,
subash
Below are the possible reson for that telnet issue
Telnet is disabled or configured incorrectly.
The WLSE cannot recognize host names.
If you are not using name recognition, slow or non-existent telnet interaction is an expected problem.
Make sure that Telnet is disabled by default. SSH is enabled by default.
Recommended Action
If the problem is not the network, perform the following steps. Connect to the console port if you cannot Telnet to the WLSE.
1. Check the Telnet settings to be sure Telnet is enabled and configured correctly. For more information, see the following
To check the Telnet settings, or to enable or disable Telnet on specific domains or IP addresses, use thetelnetenable CLI command. For more information on this command, see the User Guide for the CiscoWorks Wireless LAN Solution Engine, Release 2.13. You can access a PDF version of this guide by clicking View PDF in the WLSE's online help
To enable or disable Telnet on individual ports, use the firewall CLI command. For more information on this command, see the User Guide for the CiscoWorks Wireless LAN Solution Engine, Release 2.13. You can access a PDF version of this guide by clicking View PDF in the WLSE's online help
2. If you have specified hosts using the telnetenable CLI command, make sure the host from which you are attempting to Telnet is on the list.
3. If you are using a DNS server, perform the following step:
Configure the system to use a functioning DNS server by entering:
# ip name-server ip-address
where ip-address is the IP address of the DNS server.
If you are using the import CLI command, proceed to the next step.
4. Verify that the system can get DNS services from the network by entering the following command:
# nslookup dns-name {hostname | ip-address}
where dns-name is the DNS name of a host on the network that is registered in DNS and hostname andip-address is the same IP address specified in 2. The command returns the IP address of the host.
5. If the system cannot resolve DNS names to IP addresses, the DNS server it is using is not working properly.
Resolve the network DNS problem, then continue.
6. If you are using the import CLI command to resolve host names, verify that the WLSE can resolve host names by entering the following command:
ping hostname
Similar Messages
-
BC4j/JSP Application not responding after some time - when deployed on 9ias
Hi,
We are using BC4j/jsp application on 9ias. The application is not responding
after some time. We have installed 9ias on PIII(384MB RAM). We tried to accesses
with 10 users, and server is not responding to BC4J/JSP application.
However the server could able to publish the JSP pages with standerad JDBC code even after that.
many many thanks in advance
nullWhen the application deployed by BC4J/JSP not responding, does the sample JSP application still works? i.e. does any other application respond? Does 1 user respond? Is the database source (JDBC), running Oracle 8.1.7? What is the platform running the database (e.g. local NT database)?
-
BC4j/JSP Application not responding after some time - when deployed on 9ias BC4j/JSP
Hi,
We are using BC4j/jsp application on 9ias. The application is not responding
after some time. We have installed 9ias on PIII(384MB RAM). We tried to accesses
with 10 users, and server is not responding to BC4J/JSP application.
However the server could able to publish the JSP pages with standerad JDBC code even after that.
Please....help us.........
many many thanks in advance<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Is there any mechanism that cleans up these connections (back down to the initial or some other minimum I would guess) or do they hang around until either the app server or database shuts down?<HR></BLOCKQUOTE>
There is currently no mechanism for reducing the connection pool size after a period of high activity. Recently this has been frequently requested and as such will be implemented in the next production release.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>We have verified this in manual testing. However, when the load tool script exits it doesn't seem to release resources. We know this because we keep seeing our database connections go up and up as more tests are run. Further, we also seem to see more than one connection per "virtual user". For example, when I connect 5 users to the app in manual testing, I get 5 connections. But, when we run a test using the tool, we get 395 database sessions for 200 users. We are having a bit of difficulty understanding why the behavior is different.<HR></BLOCKQUOTE>
Assuming that the you are performing your manual testing against the same instance of the application on which you are performing your load testing, I would assume that the connections are being released to the pool at the end of the request. One possible reason for the approximate 2:1 ratio between connections and virtual users may be BC4J's use of internal connections. What version of BC4J are you using?
BC4J requires an internal connection to support state management and spill to disk. The internal connections are pooled with the transaction connection and only held for the duration of the persistence operation. However, if the web server is very busy then a large number of synchronous persistence requests may be received which would explain the eventual 2:1 ratio in the pool's high water mark.
If the user start times and think times are staggered in order to reduce the incidence of synchronous persistence requests does the ratio of connections to web sessions stabilize at some lower number (i.e. 1.5:1) -
Why new contacts are not appearing after some time?
I Am using iPhone6, iPad New and iPad mini. The contacts which I saved in iPhone are not appearing after some time. I don't know whether it is related with synchronisation of other devices. Please help me if you know the reason.
Hi,
Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts.
What are your thoughts about this forum? Let us know by doing this short survey. -
Sound not working after some time
I am using pavilion g6 laptop. Nowadays my laptop sound stops working after some time of use. I checked the drivers but everything seems to be ok. Please help what to do??
Hi sushovanee,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp you have a G6 notebook and after a period of time you lose the sound.
Have you done all your Windows updates?
Have you ran The HP Support Assistant to aid with this difficulty.
Has there been any recent changes to your system?
To assist you I will need some more information.
What exact model of G6 do you have?
How Do I Find My Model Number or Product Number
What Operating system are you running?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Pioneer DVD-ROM will not eject after some time of system usage
I'm having an odd issue where after my Mac Pro is used for a certain amount of time (it seems variable), the optical drive will no longer seemingly be recognized. It shows up in the hardware profile for the system, however when I hit the eject key, Toast starts up instead of my drive responding. Further, when Toast or any other CD / DVD writing utility is started after this occurs, the drive is not recognized in these applications.
Any idea as to what could potentially be going on here?
The thing that throws me the real curve ball is that it DOES work for a little while when the system is restarted and then just "disappears" as noted.If it's not the original Apple DVD drive, make sure "Put hard disks to sleep when possible" is not enabled in "Energy Saver" system preference, then reboot the system.
-
MBA 11 (2013) pinch zoom does not work after some time, how to fix it ?
Recently I purchased MBA 11 (2013) model ( 4GB ram & 1.3 Ghz dual core). Although I use iPhone 5 & iPad 4 but never used mac. So when I found the track pad is capable of pinch zoom(along with other gesture) I was excited. But later I found after opening few apps (like safari, chrome etc) pinch zoom stop working . I need to restart in order to make it work again. Other gestures works fine just issue with the pinch zoom. Along with this issue I have some other questions as well
1) How to fix this pinch zoom issue?
2) I use eclipse for android development, but when I connect android phone/tablet - os crashes, no idea why?
3) How to uninstall & update apps properly which was downloaded from web (like I installed x-code) ?
4) I want to use mouse (i am comfortable) - I need to know whether right click, wheel, ling click & drag works perfectly.
5) How to back up the os if something goes wrong I can retrieve from there ?Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
http://support.apple.com/kb/TS3694#error6 -
Collaberation Suite Stops Responding after some time
I have been testing collaberation suite on linux and have everthing working to 100%, but it seems that after a day or so of running it stops working. The listeners stop and I cannot access any of the services until I restart them. The configuration is:
Dual Intel 1.7 gighrtz Xeon Pentiums with 2 Gig of ram. Could it be I need more ram?
I don't have, but 3 users just for testing so it's not highly demanded upon.
Thanks for you Help,Hi,
What O/S are you using, and what version of the kernel?
Thanks and Best Regards
Lynne -
Boot camp not responding after some process
I heard that it is downloading time for boot camp assistance. I have already downloaded the "BootCamp5.0.5033.zip" from apple site. Is there any way to use this while installing windows?
Use Applications/Utilities/Boot Camp Assistant.
-
Firefox stops responding and some times dose not start when clicked on alot!
fire fox 9 stops responding for long periods and some times dose not load when clicked on. Also please note fire fox refuses to load the comments section on Yahoo.com under the news tab. The little wheel on the bottom of the page just spins and spins and never loads this area of the page.
I think i know why but wonder since i have had issues with fire fox in the past with the whole not responding and load issues.Firefox which stops responding after some time is a BIG problem. You're not the only one. The problem seems to be with sites which require Java. The problems I seem to have spotted is this : You visit a web site which needs Java so Java asks Firefox for the amount of memory needed and this is lent to JAVA. However, when you leave that web site, Java is naughty in that it doesn't give back the memory borrowd. Firefox then has to consume a lot of memory to the point that the whole computer system grinds to a halt as you have run out of memory.
Search in the forums for high memory or RAM and you will see many threads. In fact, when you first install Firefox it will ask if you want to send anonymous data about the memory usage!! -
How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?
How can I delete EVERY THING off my Mac and have it like new?
Boot from the software install DVD and do an "erase and install" when prompted. -
Hi,
I have an Iphone 3G.
Its 9 months old mobile and it has OS 4.2 in it.
When I am accessing wi-fi, suddenly the display went-off and then I was not able to start my phone again.
Later I tried to restore and update the Iphone using Itunes.
I have updated the Itunes.
Using hard-reset, I tried to restore the OS and did the same successfully.
After installing the same over my Iphone 3G, I didnt recieved any intimation for completion of the process, besides, I was not able to start the mobile even I have reset the OS.
when I push the wake-up button, I am able to see the Apple Logo and after some time, it goes off and remains idle with no more display.
I tried to reset OS twice, it remained the same.
Can any one help me here with this issue.
I am not even able to figure-out the cause of the problem.
Thanks in advance.
Bharath.Hi,
I have an Iphone 3G.
Its 9 months old mobile and it has OS 4.2 in it.
When I am accessing wi-fi, suddenly the display went-off and then I was not able to start my phone again.
Later I tried to restore and update the Iphone using Itunes.
I have updated the Itunes.
Using hard-reset, I tried to restore the OS and did the same successfully.
After installing the same over my Iphone 3G, I didnt recieved any intimation for completion of the process, besides, I was not able to start the mobile even I have reset the OS.
when I push the wake-up button, I am able to see the Apple Logo and after some time, it goes off and remains idle with no more display.
I tried to reset OS twice, it remained the same.
Can any one help me here with this issue.
I am not even able to figure-out the cause of the problem.
Thanks in advance.
Bharath. -
when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.
I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?
-
I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?
Are you trying to update via wifi or connected to your computer?
Cheers, Tom -
Kinect is not firing MultiSourceFrameArrived event after some time
Hi,
I am using Kinect v2 with EmguCV in my application. I am performing some image processing task on the acquired frame. I noticed that after some time (1-2 minutes) the Kinect is not firing MultiSourceFrameArrived event.
Below is the snippet of the code-
public partial class KinectForm : Form
KinectSensor kinect;
MultiSourceFrameReader reader;
CoordinateMapper coordinateMapper;
public KinectForm()
kinect = KinectSensor.GetDefault();// Get the connected kinect Sensor
coordinateMapper = this.kinect.CoordinateMapper;
reader = kinect.OpenMultiSourceFrameReader(FrameSourceTypes.Color | FrameSourceTypes.Depth);
kinect.Open();// Start reading the data from kinect
InitializeComponent();
private void FrameArrivedDisplayMode(object sender, MultiSourceFrameArrivedEventArgs e)
var reference = e.FrameReference.AcquireFrame(); // Get a reference to the arrived frame
ColorFrame colorFrame = reference.ColorFrameReference.AcquireFrame(); // Access color frame
DepthFrame depthFrame = reference.DepthFrameReference.AcquireFrame(); // Access depth frame
if (colorFrame != null && depthFrame != null)// Do not proceed, if any frame is expired
RenderColorPixels(colorFrame);
RenderDepthPixels(depthFrame);
// Lots of image processing is being performed here
if (colorFrame != null) colorFrame.Dispose();
if (depthFrame != null) depthFrame.Dispose();
private void KinectForm_FormClosing(object sender, FormClosingEventArgs e)
if (this.reader != null)
this.reader.Dispose();
this.reader = null;
if (this.kinect != null)
this.kinect.Close();
this.kinect = null;
private void displayModeRadioButton_CheckedChanged(object sender, EventArgs e)
if (displayModeRadioButton.Checked)
reader.MultiSourceFrameArrived += FrameArrivedDisplayMode;
else
reader.MultiSourceFrameArrived -= FrameArrivedDisplayMode;
The above code was working earlier, but later on once I added more processing on the data, the event was not fired at all after some point of time.
I am disposing the frame every time. Why this is happening? How to fix this problem?
ThanksCarmine, Thanks a lot for prodding the references. I am in the process of designing it.
Meanwhile, since as you said the above code was holding the frame data and disposing the frame after processing it, so I though of changing the style little bit. Please see the code below-
private void FrameArrivedDisplayMode(object sender, MultiSourceFrameArrivedEventArgs e)
var reference = e.FrameReference.AcquireFrame(); // Get a reference to the arrived frame
ColorFrame colorFrame = reference.ColorFrameReference.AcquireFrame(); // Access color frame
DepthFrame depthFrame = reference.DepthFrameReference.AcquireFrame(); // Access depth frame
if (colorFrame != null && depthFrame != null) // Do not proceed, if any frame is expired
ColorFrame.CopyConvertedFrameDataToArray(ColorFramePixels, ColorImageFormat.Bgra);
depthFrame.CopyFrameDataToArray(DepthFrameData);
colorFrame.Dispose();
depthFrame.Dispose();
//Here I am doing image processing
Now, this way I am not using some of the frames but it should work, since the frame is disposed earlier.
But still after some time, the event is not fired out.
Why? Can you tell me the reason?
Thanks
Ravi
Maybe you are looking for
-
Integrated google Map on SAP Work Manager 6.0
Hi I am new in agentry and worked on SAP Work Manager App. I want to put customized map in Agentry and show some workorder on that map. Can anyone give me any suggestion regarding it. Thanks Mohit Tyagi
-
HT1461 How to Open a PDF file (that was sent to me via email) on windows 7 side of MacBook pro
Please help fast
-
Photos in some emails don't display they will with live mail
Some emails don't download photos and these photos don't come as attachments they are part of the original email. I checked that the photos have been sent in live mail which i want to move away from.It has not happened a lot. I can see no difference
-
A Partner asked the following question: "I have been designing custom reports for a client using Reports 2.5 which are then implemented in Oracle Financials. The client has now moved to a Multi Org environment. What do I need to do to my reports to g
-
Trial Acrobat X - not worth the pain
SO, IF YOU ARE THINKING ABOUT TRIALING ACROBAT X . . . DON'T! YOU'LL REGRET IT. I use all parts of CS3. I saw the trial for Acrobat X and thought, "I'll give it a spin." Big mistake. Now Adobe popups are hounding me every minute or so with "buy it no